This is a FANTASTIC video! Great camera angles! Showing each step in detail, like WHERE to insert the pry tools, is super helpful. I'm in the middle of removing my ST2's center console to swap out the shifter with a short-shifter and do a bushing install and I ran into a roadblock with removing the e-brake. You showed us exactly how it's done. Thank you!
Just so you’re aware, I installed mine today and it was a breeze thanks to this video. Hardest part for me was that piece above the AC unit. Thanks for this!
Just installed the euro cup holders, it was very easy with your video! Thank you for all the installation videos, I have pretty much followed all of them :)
Just did this last night. Thanks for the video it was a big help. I was going a little nuts looking for the screws behind then passenger airbag trim because you skipped past removing that part. Couldn’t figure out for a minute or so how you had screws there and I didn’t! Video was a big help though
This is mod I would have literally never thought to do lol, I didn't even know there was a difference, that being said now I think I'll have to order some Euro cup holders. PS: frozen white is the best color haha 👌 just picked up a 17 RS2 frozen white RS
I had never seen this one either but I really like it. I may want to enlist the help of my bro-in -law who is an SVT mechanic (or is that Ford Performance now?) when my RS comes in. Its on order right now and does not show an estimated delivery date yet...bummer. Frozen White though!
At least you picked the right color RS ;) And yep, you're Ford Performance bro-in-law mechanic should have no problem getting this done. Congrats on the order, and while I know the wait is the hardest part, it's definitely worth it!
I just did this mod today it took me approximately 2 hours to complete and some things appeared much easier in your video than when I attempted it lol everything came out well the only thing I found extremely difficult was trying not to scuff or scratch any of the plastic pieces but it was impossible to complete without a few unfortunately.
Just did my console swap out thanks to your video. Just a few tips, you don't show removal of the passenger airbag light trim piece..this was the most difficult because the left prong got stuck on the plastic nub and was a pain to remove. Also there are cables underneath the console that need to come off their fastener locations to facilitate removal of the console after everything is removed.. Other than that great video and thanks!
Hey Scott - I'm glad to hear this video helped! Yeah it ended up taking me so long to remove the passenger airbag light trim I forgot to record it so I couldn't include it in the vid. I'd recommend trying to remove that FIRST, if you can get that off - you can do the rest. :) Thanks!
Sweet! My cupholder showed up EARLY! So I got the install done this weekend.. But now I am wondering whats going on with the extra USB plug you are showing @ 0:08. Part# HU5Z-19A387-A WHERE does it plug into the wiring harness? Are you stealing the plug from the one in the Arm rest? Splitting from somewhere? Maybe theres another source I didn't see? I really want to add this final touch, but being as I didn't find anywhere to plug one in, I'm not sure how.
The USB hub in the video is actually replacing the one in the center console. My car was an early build so it had an older version that didn't quite support android auto / carplay fully so I upgraded it while the console was out. Thanks!
Great Video, I have damaged my sliding door, so need to change it. This video is priceless. What are your plastic levers called, wonder if i can get them in uk.
How long did this take you to complete? Also I'm worried that the console will rattle and buzz after this... Is yours still as tight as it was before doing this?
It took me about three hours, but you have to figure in setting up the cameras and what not. I could've probably finished in about half that time if I just did it without filming. I drove it around quite a bit to go pick up dinner and didn't hear any new creaks or rattles, its just as tight as it ever was! As long as you take your time when your putting it back together you'll be just fine. Doooo eeeet!
Yeah its too bad that the euro holder doesn't have the built in LEDs but at least drinks/water bottles aren't interfering with my shifting anymore. I like how much lower they sit. :)
Hey! There's no direct link to it actually - I dealt with an E-Commerce Supervisor at a Ford Store in the UK. The whole process was surprisingly easy and she was super patient and helpful. Feel free to email her at michelle.shaftoe@fmg-uk.com and if you point her to this video she'll know exactly the part you're looking for. Good luck!
I'm sure she'll take care of you - the only thing that occasionally delayed a reply was the time zone differences. Lemme know how it works out for you!
Hey josh, she got back with me and I was able to order the part! It was around $200 but well worth it to me, since that’s the one interior mod I’ve been wanting to do. Thanks!
Hey Blake! Glad to hear she took care of you - yeah the shipping is the expensive part but what can ya do... I've been wanting to replace the rear headrests also, but they're quite a bit more pricey. One of these days! Message me if you have any questions on the install.
Did you also install a USB port? One was shown at the beginning. If so, what was the part #, and is it available in US or euro only? On focuses.org you mentioned drilling a hole for LEDs. Can you elaborate? Did you used OEM LEDs or other? How were the LEDs (and USB port if you used one) wired up?
Hey Thom, I did install the USB that was shown at the beginning. Part #HU5Z-19A387-A , and it is the required USB port for the Sync3 upgrade with Android Auto - as my car is a early '16 it didn't already have it pre-installed. You can get them from any ford dealer here in the states if you need one. Regarding the LEDs, the stock cup holder has a Red LED pre-installed and there is no hole for one on the euro version. If you wanted to, you could use an aftermarket LED, drill a hole in the Euro cup holder and wire it to the stock wire location. I opted to not do that and not have any LED. Hope that helps, let me know if you have any other questions!
Josh Mills THANK YOU! If I have an '18 could I still use that USB part number you shared? Would that just add another port or something else? Does it connect up obviously in a "plug and play" manner? Thanks again!!
Thom Murphy - My pleasure! :) If you have an '18, you don't actually need it as it just 'upgrades' the one that already exists in your armrest. The '16s shipped with an under-volted port and were incompatible with Apple CarPlay, this USB port fixes that. It was as simple as unplugging the old one and plugging the new one in - no change in plugs or anything.
Josh Mills ah, so you installed the USB part in the arm rest not the cup holder? I thought it went in the cup holder. In then hole as shown here: www.focusrs.org/forum/attachment.php?attachmentid=106329&stc=1&d=1482030610
Thom Murphy yep it was just a straight swap with the original one, I honestly didn't even notice that cut out / panel on mine - in fairness I didn't let it sit too long before installing so it could be there on mine as well.
I ordered it directly from a UK Ford Dealer. Here's a link to their page www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm
Great video, very specific. Does anyone know if i can buy and install separately the cover shown at min 4:20? I have the same console but without that cover (a code or naming would help). Cheers
Take a look at this tread and it might help you understand how to release it www.focusrs.org/forum/27-focus-rs-guides/40634-diy-uk-cup-holder-install-56k-warning.html Good luck! (basically you need to use a pry tool to lift up a tab to release it)
Hey JJ, it took mine 6 days to arrive after being picked up in the UK. That being said, I'm on the West Coast so your times could vary. Good luck on the install!
The link in the pinned comment should work, Ordered from Ford Parts UK, www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm if not, you'll have to put in a parts request with them and they're pretty good about getting back to you.
I ordered mine from amazon - They come in handy more than I realized they would! www.amazon.com/gp/product/B009QLBDSW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
As you can see around the 3:20 mark, the cup-holder portion is removed/installed from the bottom which requires you to take out the whole thing. Additionally, that little white cable he took out is for the red LED that is not applicable to the Euro-spec. It's only accessible after you take it out. You could try doing it from the top but you'll have to rip/break a lot of trim pieces.
I have a set of Aries StyleGuard floor mats. They're great, with the exception of not having alignment holes on the passenger side which is not really a big deal as they have hook and loop backing that holds them to the carpet really well. Here's a link to the mfg's page www.ariesautomotive.com/part/2925709
Hey Rob, I ordered it directly from a UK Ford Dealer. Here's a link to the page www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm
Ehh, it kinda is a DIY - It's not that hard if you have basic hand tools and some patience. I'd prefer to save the money paid to the 'Pro' and use it on more parts! :)
Why? Bottles and cans or whatever will be all over the place, I’d rather swap my euro one out for what you have, worst design ever. Needs some sort of insert to hold slimmer bottles more secure, the sliding bits are crap.
Hey Gary! I just answered this same question but here's a copy pasta - I have a set of Aries StyleGuard floor mats. They're great, with the exception of not having alignment holes on the passenger side which is not really a big deal as they have hook and loop backing that holds them to the carpet really well. Here's a link to the mfg's page www.ariesautomotive.com/part/2925709
This is a FANTASTIC video! Great camera angles! Showing each step in detail, like WHERE to insert the pry tools, is super helpful. I'm in the middle of removing my ST2's center console to swap out the shifter with a short-shifter and do a bushing install and I ran into a roadblock with removing the e-brake. You showed us exactly how it's done. Thank you!
Happy to hear these videos are still helping people out, thanks for the comment!
Just so you’re aware, I installed mine today and it was a breeze thanks to this video. Hardest part for me was that piece above the AC unit. Thanks for this!
Just installed mine today and couldn’t of done with out this video. So worth the disassembly.
Glad it helped - congrats on getting it finished!
I just bought this. It's gonna take a month or more to show up, but I really appreciate this video man. I don't think I'd try this on my own.
I want to buy it too, where did you get it? I'm from Brazil here not the RS version.
Used this video as reference on how to remove the center console when doing my ford performance short throw shifter assembly
Just installed the euro cup holders, it was very easy with your video! Thank you for all the installation videos, I have pretty much followed all of them :)
I'm glad they helped! Thanks!
Just did this last night. Thanks for the video it was a big help. I was going a little nuts looking for the screws behind then passenger airbag trim because you skipped past removing that part. Couldn’t figure out for a minute or so how you had screws there and I didn’t!
Video was a big help though
so how did you remove it?
I've been thinking about doing this for a few months now. Great video!
Excelent bro!
This is mod I would have literally never thought to do lol, I didn't even know there was a difference, that being said now I think I'll have to order some Euro cup holders. PS: frozen white is the best color haha 👌 just picked up a 17 RS2 frozen white RS
Haha, same here, now that its in and done - I would definitely do it again! Yep, that Frozen White is juuuust right!
I had never seen this one either but I really like it. I may want to enlist the help of my bro-in -law who is an SVT mechanic (or is that Ford Performance now?) when my RS comes in.
Its on order right now and does not show an estimated delivery date yet...bummer. Frozen White though!
At least you picked the right color RS ;) And yep, you're Ford Performance bro-in-law mechanic should have no problem getting this done. Congrats on the order, and while I know the wait is the hardest part, it's definitely worth it!
I just did this mod today it took me approximately 2 hours to complete and some things appeared much easier in your video than when I attempted it lol everything came out well the only thing I found extremely difficult was trying not to scuff or scratch any of the plastic pieces but it was impossible to complete without a few unfortunately.
Hey Harris, Glad you got yours done! Don't let the video fool you as my install being easy - I just didn't show all my failed attempts lol.
Just did it before cold weather got here
Nice! Any problems on the install?
Very sweet mod, nice job!!!
Just did my console swap out thanks to your video. Just a few tips, you don't show removal of the passenger airbag light trim piece..this was the most difficult because the left prong got stuck on the plastic nub and was a pain to remove. Also there are cables underneath the console that need to come off their fastener locations to facilitate removal of the console after everything is removed.. Other than that great video and thanks!
Hey Scott - I'm glad to hear this video helped! Yeah it ended up taking me so long to remove the passenger airbag light trim I forgot to record it so I couldn't include it in the vid. I'd recommend trying to remove that FIRST, if you can get that off - you can do the rest. :) Thanks!
@@J0shM1lls I'm about to pick mine up and try to do the swap this Friday. How much of a pain is this to get out/can I make it easier on myself? lol
Yeah I can’t get my shit off
Sweet! My cupholder showed up EARLY! So I got the install done this weekend.. But now I am wondering whats going on with the extra USB plug you are showing @ 0:08.
Part# HU5Z-19A387-A
WHERE does it plug into the wiring harness? Are you stealing the plug from the one in the Arm rest? Splitting from somewhere? Maybe theres another source I didn't see?
I really want to add this final touch, but being as I didn't find anywhere to plug one in, I'm not sure how.
The USB hub in the video is actually replacing the one in the center console. My car was an early build so it had an older version that didn't quite support android auto / carplay fully so I upgraded it while the console was out. Thanks!
nice job!
Thank you!
❤❤❤❤top
Agreed Nice job!!!!.
Thanks - I appreciate it!
I want to buy it too, where did you get it? I'm from Brazil here not the RS version.
Great Video, I have damaged my sliding door, so need to change it. This video is priceless. What are your plastic levers called, wonder if i can get them in uk.
you can probably search for 'automotive interior trim removal tools' to find what I used. good luck!
Love it!!!!!!!!!
YeeYeeYee!
Do you know how to disassembly the armrest in the middle ? I wanna give it slme new leather but cant get it off ....
How long did this take you to complete? Also I'm worried that the console will rattle and buzz after this... Is yours still as tight as it was before doing this?
It took me about three hours, but you have to figure in setting up the cameras and what not. I could've probably finished in about half that time if I just did it without filming. I drove it around quite a bit to go pick up dinner and didn't hear any new creaks or rattles, its just as tight as it ever was! As long as you take your time when your putting it back together you'll be just fine. Doooo eeeet!
I've had mine in for over 10k miles, no rattles noticed.
Top vid thanks
i like my red lights in the cup holder but looks very nice euro style
Yeah its too bad that the euro holder doesn't have the built in LEDs but at least drinks/water bottles aren't interfering with my shifting anymore. I like how much lower they sit. :)
I can't fathom why the interior LEDs are red... why would they put the ST leds
+TheMidnightNarwhal I'm guessing its just to keep the costs down... I'd rather they be blue to match the RS theme but hey.
Yeah.
How many are they? I did visited the car at a dealer but never tried/show the interior red LEDs. I think I would just not have them at all.
Floor mats?
sick! does this work in an ST?
nice
Mate where are those mats from !! I need them haha
Euro console is much better huh? It's one of the most favorite things I've done haha
MUCH better! :)
How much was the shipping?
Interested in doing this mod. Happen to have a link to where I can buy this? I can’t find anything online? Thanks
Hey! There's no direct link to it actually - I dealt with an E-Commerce Supervisor at a Ford Store in the UK. The whole process was surprisingly easy and she was super patient and helpful. Feel free to email her at michelle.shaftoe@fmg-uk.com and if you point her to this video she'll know exactly the part you're looking for. Good luck!
Thank you for the fast reply! I’m trying to use the focus Facebook groups right now to get a direct link. So far no luck, so I’ll email her.
I'm sure she'll take care of you - the only thing that occasionally delayed a reply was the time zone differences. Lemme know how it works out for you!
Hey josh, she got back with me and I was able to order the part! It was around $200 but well worth it to me, since that’s the one interior mod I’ve been wanting to do. Thanks!
Hey Blake! Glad to hear she took care of you - yeah the shipping is the expensive part but what can ya do... I've been wanting to replace the rear headrests also, but they're quite a bit more pricey. One of these days! Message me if you have any questions on the install.
While removing console Machanic broke the button of hand break any advice plz help
My 4yrold boy put a coin in the slots next to shifter where you have buttons now rattles like crazy might have to do this
i badly need arm rest where i can buy?? the whole console
Did you also install a USB port? One was shown at the beginning. If so, what was the part #, and is it available in US or euro only?
On focuses.org you mentioned drilling a hole for LEDs. Can you elaborate? Did you used OEM LEDs or other?
How were the LEDs (and USB port if you used one) wired up?
Hey Thom, I did install the USB that was shown at the beginning. Part #HU5Z-19A387-A , and it is the required USB port for the Sync3 upgrade with Android Auto - as my car is a early '16 it didn't already have it pre-installed. You can get them from any ford dealer here in the states if you need one.
Regarding the LEDs, the stock cup holder has a Red LED pre-installed and there is no hole for one on the euro version. If you wanted to, you could use an aftermarket LED, drill a hole in the Euro cup holder and wire it to the stock wire location. I opted to not do that and not have any LED.
Hope that helps, let me know if you have any other questions!
Josh Mills THANK YOU!
If I have an '18 could I still use that USB part number you shared? Would that just add another port or something else? Does it connect up obviously in a "plug and play" manner?
Thanks again!!
Thom Murphy - My pleasure! :) If you have an '18, you don't actually need it as it just 'upgrades' the one that already exists in your armrest. The '16s shipped with an under-volted port and were incompatible with Apple CarPlay, this USB port fixes that. It was as simple as unplugging the old one and plugging the new one in - no change in plugs or anything.
Josh Mills ah, so you installed the USB part in the arm rest not the cup holder? I thought it went in the cup holder. In then hole as shown here: www.focusrs.org/forum/attachment.php?attachmentid=106329&stc=1&d=1482030610
Thom Murphy yep it was just a straight swap with the original one, I honestly didn't even notice that cut out / panel on mine - in fairness I didn't let it sit too long before installing so it could be there on mine as well.
Hello, do you have the part number for the euro spec center console?
Can you add listing of p/n?
Where do you buy it
I ordered it directly from a UK Ford Dealer. Here's a link to their page www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm
Josh Mills think i can also order the shell seats from the site?
Any idea if it would fit the US st1?
Yes it will.
Great video, very specific. Does anyone know if i can buy and install separately the cover shown at min 4:20? I have the same console but without that cover (a code or naming would help). Cheers
Does it use the same screws as the old us spec
JOsh are you interested in selling the cup inserts from the US version.
Unfortunately I'm not, I usually hang on to all my stock parts for those "Just in case" scenarios. Sorry!
How did you remove the 'passenger airbag' piece? I had to give up there :(
Take a look at this tread and it might help you understand how to release it www.focusrs.org/forum/27-focus-rs-guides/40634-diy-uk-cup-holder-install-56k-warning.html Good luck! (basically you need to use a pry tool to lift up a tab to release it)
I just ordered mine today, how long til you received it in the US? I’m eager
Hey JJ, it took mine 6 days to arrive after being picked up in the UK. That being said, I'm on the West Coast so your times could vary. Good luck on the install!
Do you have to disconnect the batter
i have the european version but it miss the backlight! which is available in the US version! too bad :(
i would have just dremeled a hole
Where did you get the pastic tools to pry the panels apart?
I think I ordered them off amazon for like $10 for the whole set. A must have when you're working on interior trim.
Where did you order this from? I looked everywhere and keep coming to dead ends.
The link in the pinned comment should work, Ordered from Ford Parts UK, www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm if not, you'll have to put in a parts request with them and they're pretty good about getting back to you.
Where do you buy the Plastic Toolls?
I ordered mine from amazon - They come in handy more than I realized they would!
www.amazon.com/gp/product/B009QLBDSW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Thank for your Answer
From the plastic tooll store duh!
Los tapetes de tu auto, Los trae de agencia o son extras?
No son de agencia, los compre por esta pagina www.carid.com/2016-ford-focus-floor-mats/aries-styleguard-floor-liners-863765037.html
Josh Mills podría mandar porfavor nuevamente el Link? El que mando no carga...
Disculpa esta es el link correcto! www.carid.com/2016-ford-focus-floor-mats/aries-styleguard-floor-liners-863765037.html
What floor mats are you using? those look great.
They're the Aries StyleGuard floor mats. They're great! Here's a link to the mfg's page www.ariesautomotive.com/part/2925709
J0sh M1lls thanks. will check them out
Checkout the findway ones too. I have the ones similar to the aries but the findways were much cheaper. I wish i knew about them before.
EnfinityX thanks!
just got the change to check those out. They look amazing and the price is spot on! Thanks for the tip!
Why do Ford put different consoles into the non Euro cars, also the head unit is not badged Sony for the Euro cars, just don't get it?
Who knows why they do things - I think they should just make one global car all the same (with options of course). But that's just me...
Cuz fat ass Americans like their 30oz sugar drinks.
Can someone explain why you need to do ALL of that?
As you can see around the 3:20 mark, the cup-holder portion is removed/installed from the bottom which requires you to take out the whole thing. Additionally, that little white cable he took out is for the red LED that is not applicable to the Euro-spec. It's only accessible after you take it out. You could try doing it from the top but you'll have to rip/break a lot of trim pieces.
What floor mats do you have?
I have a set of Aries StyleGuard floor mats. They're great, with the exception of not having alignment holes on the passenger side which is not really a big deal as they have hook and loop backing that holds them to the carpet really well. Here's a link to the mfg's page www.ariesautomotive.com/part/2925709
Thanks very much! I don't think I will mind not having the hole for the plug.
Will these fit the ST1 or ST2 mk3 Focus ST?
Should fit any Mk3 face-lift Focus. Not sure about the plain Mk3 though..
Dammm i need to do do the same i like it
Where did you get the new insert?
Hey Rob, I ordered it directly from a UK Ford Dealer. Here's a link to the page www.fordpartsuk.com/shop/ford_focus_centre_console_cupholder_2014_f_2058173.htm
Thanks for the info I'll be getting for my 2017 rs
he posted this like it's a diy. That should only be done by a pro
Ehh, it kinda is a DIY - It's not that hard if you have basic hand tools and some patience. I'd prefer to save the money paid to the 'Pro' and use it on more parts! :)
I get you but it just looks Ike a lot can go wrong
Will this mod work on a st?
+Jon Lucas I'm pretty confident it will, I got the basic understanding of how to do this mod from a Focus ST forum. 👍
Josh Mills holy fast reply lol thanks man
+Jon Lucas no prob! :)
worth it?
Haha believe it or not - totally worth it :)
I'm thinking of doing this swap myself. i lost one of the cup holder inserts and the dealer wanted 72 dollars for a replacement, what a ripoff.
$72 ? LOLWUT? They're freaking crazy... If you're going to pay that much, you might as well order the Euro Cup holder and kill two birds!
Josh Mills I know right, the parts guy actually told me to take a car out for a test drive and just take it lol.
Why? Bottles and cans or whatever will be all over the place, I’d rather swap my euro one out for what you have, worst design ever. Needs some sort of insert to hold slimmer bottles more secure, the sliding bits are crap.
I’ll swap yours for my us one
Catfish lol
what kind of floor mats do you have?
Hey Gary! I just answered this same question but here's a copy pasta -
I have a set of Aries StyleGuard floor mats. They're great, with the exception of not having alignment holes on the passenger side which is not really a big deal as they have hook and loop backing that holds them to the carpet really well. Here's a link to the mfg's page www.ariesautomotive.com/part/2925709