What a great video! I love the joy of fixing issues on my car by myself. This helped me understand this extensive software and how powerful it is for diagnosing issues. You a Legend! Keep your videos coming. Each one is a great help!
Appreciate this video, I had changed my oxygen sensor and had no idea I needed to reset the parameters.🙄 It may explain why there was only a small improvement.
Спасибо за проделанную работу! Thx for your job! Very usefull video. Exists special made KKL for MiltiEcuScan with selector on board and you dont neeed use this color adapters.
Hello when i try to connect on the airbag module with my elm327 connector and the red adapter on my 147 it says no response from ecu do i need a KKL (blue) connector in combination with the red adapter aswell?
Fantastic, to see and see many times. The equipment is not expensive, if you have the time to use it. I'd love to have the time to act on it. I haven't even had time to connect my new android radio....soon it will become obsolete😕
15:09 - Since I don't want to break my ABS unit and I want to change the old brake fluid, the garage where I'll go doesn't have the MultiECUScan but they use a pressure device tot change the fluid. I also have a 156 and they've done it straight, since I don't have any options in the MES for 156's ABS. So, if I change the brake fluid, I should to this first for GT and after that put in new brake fluid and use their pressure changing device? By the way, the brakes in my GT are worse than 156. :| They don't bite as hard as the 156 does. Both of them have the same Textar brake pads allarround.
You can change a brake fluid without using a MES or any kind of pressure device. The process is very simple, all you need is a buddy to pump the brake pedal, and you need to start releasing the fluid just as you would do when you do a brake bleed. Always start from the furthest wheel, and work your way up. Also you got to make sure that your brake reservoir is always full during the process, so it doesn't suck in the air. We might actually do the video on it, since I got to do it on my GT as well...
Hi. Any tips on how to get the ELM327 adapter to connect to the ECU? I can only source V1.5 locally. I bought four different adapters but still no luck. It connects to friends cars and my Volvo but it does not connect to my Alfa 156 ECU. Tried choosing different ECU versions from the list but no luck. I even bought the Wifi and Bluetooth versions but struck out. Is there a specific cable that definitely works? I have a 2005 Alfa 156 2.0 TS
I'm curious about multiscan, as someone who likes to use his pc for software like inpa for BMWs. But I see on google apps there is a Alfa obd app for about $50 Australian. Hmmm
broo thanks for the settings I wonder why it couldn't connect to my 147 ts. I have that elm Bluetooth one but mine where at default something else. Gonna try to connect it again .
@@arcgarage yes you are right. I didn't have any luck connecting to the ecu. I even tried another elm327 with usb but no luck. I don't know If Im going to get that cable since I have the "right side light failure" and a funny thing yesterday I managed to get rid of the left error by cleaning the plastic holder with sandpaper. But the right still can't remove the error. Maybe I should change the whole part. But the light functions its just the error I want to get rid off.
Thanks,very helpful video for a new user like me.I changed my calipers over and have bled the brakes but they are still spongy on starting so i think i have air in the abs system.If i want to bleed the Abs using multiecuscan,do you know if the car should be running?
Well my selespeed gearbox is stuck in first gear. It won’t change into any other gear. So that means I can’t start the car because it has to be in neutral. So I just wanted to know will multiecuscan diagnose the problem without it running. I’m just waiting for my elm 327 to arrive in post.
Hi thx for the video, good ..1 question this tools & software can WORK with fiat 2020 / 2021 ??? & jeep renegade 2020 and 2021 ??? Just to reset service thx
@@arcgarage Main aim is scanning and clearing the fault codes, and maybe reading the live data. The free version supports these functions, doesn't it? What cable is needed for these tasks?
when you changed the ports before connecting to the airbag, is it just a downloaded port that you load that allows you to open the airbag system? or do you have a bunch of different adapters that unlock certain systems? Curious on how to check faults of all systems. Great video!
not sure if you know about race mode install on giulia 2.0 but you need to reset proxi alignment. I had to plug in the blue cable in first, success, then plugged the grey cable in & everything was failing. I restarted the whole process & everything worked. Now i have race mode but my door locks are messed uo. Sometimes they dont work when you press them, sometimes they do. Also the light on the door lock turns on/off when it wants to. Only had a couple hours in the car today but if you know where i would go or what i have to do to reset it, it would help A LOT! Thanks!!
Is it possible to turn off ”side light warning” without changing the bulb? I don’t want to see it every time I start my car, and I want to wait until main low beam (xenon) needs replacing since it is a bumper off job.
@@arcgarage In fact, you CAN turn off the warning, by disconnecting the STATUS pin of the chip controller VNQ810M from the inside circuit of the Body Computer. That way you will never be warned regarding burned out bulbs as the BC will never get a signal for corresponding STATUS pin.
@@arcgarage Yes, that is rather a hardware modification. Anyway, it is a solution :) also it works for turn signal led hyperflash. Thank you for your informative videos! 👍
Hi I have problem with connection, only once I connect to a body 😑 I set up everything but once I connect then test for obd shows times out message and then connection failed check obd connection or port any advice 😀 thanks
@@arcgarage no its set up on high speed obd and latency is 3800 so I presume that should be correct i have a all day tommorow to look on that again so I let you know 🙂 thanks for help 👍👌🙏
Hi ARC Garage. I have changed my speedo cluster, can I, and how can I program in the new cluster? ( got the blinking odometer) Just bought the MultiEcuScan program (50eur version) and the cables arrived today. I read that I can program new component to the car. but really don't know how.
Great video. Does this work for all models ... i see for AR 147 only 1.9 jtd ... does this apply on all models like Jtdm 8v or 16v ... are those supported?
@@arcgarage Cao brate opet ja, sad pokusao da se povezem i meni je ona sa 8v al kad se poveze jedino mogu sa zadnja opcija 16v 24v i kad idem u body opciju nijedna opcija ne radi uvek ono elm327 -> not connected to ecu something like that (just like you have shown on the video, but you succeed to connect with last option)
Thanks for video! A question comes to my mind in this matter, is it possible to change (lower) the mileage on the odometer? I´m about to buy a GT -04 with +11.0000 km on the road.
Thanks for the review 👌🏼 this would allow you to check if the odometer has been changed on any alfa if I understand right. That might be very interesting Also I think I need to change one of my window computer as the window doesn't automatically drop a few cm when I open the door but does go down without a problem using the switch. Would I need to do a proxy alignment if I fit a new one? If so, I will need to get this program for sure
No problem, you're right. When it comes to window controls, try window reprogramming if you already did not, here's the link ruclips.net/video/Ph73_9_2KvU/видео.html. If you decide to get new unit, you need to do proxy alignment. You can do it with MES or any other good diagnostic tool...
@@arcgarage the resets works for a while but after getting in and out a few times it stops. I think the module is dying or something. Anyway you're a hero man helping keep Alfas going around the world 💪🏼💪🏼
Just a little update for anyone with the same problem; My window wasn't automatically dropping a few cm when opening the door but was otherwise working fine so I changed the window module behind the door card and it's fixed 👍🏼
Buenas tardes, disculpe. estoy necesitando el procedimiento para ejecutar el aprendizaje de la mariposa motorizada del Fiat Palio 1.8 8V 2007. Descargamos la versión 4.6 y no nos da esa opción. Podría indicarme por favor como se activa con este sotfware? Gracias de antemano. ________________________________________________________________________________________________________ Good afternoon, excuse me. I am needing the procedure to execute the learning of the motorized throttle of the Fiat Palio 1.8 8V 2007. We downloaded version 4.6 and it doesn't give us that option. Could you please tell me how to activate it with this software? Thanks in advance.
![These are The Best ALFA ROMEO OBD2 Diagnostic Scan Tools - [2024 BUYERS GUIDE]](http://i.ytimg.com/vi/9yqlOdwHfMo/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
What a great video! I love the joy of fixing issues on my car by myself. This helped me understand this extensive software and how powerful it is for diagnosing issues. You a Legend! Keep your videos coming. Each one is a great help!
Glad it helped, thank you very much for support buddy, it means a lot...
Best ever tutorial on how to connect and use multiecuscan. Thanks bro
Glad it was helpful, thanks you for support...
Appreciate this video, I had changed my oxygen sensor and had no idea I needed to reset the parameters.🙄 It may explain why there was only a small improvement.
Glad it helped...
Спасибо за проделанную работу! Thx for your job! Very usefull video. Exists special made KKL for MiltiEcuScan with selector on board and you dont neeed use this color adapters.
Thanks for the info, will check it out...
Great video! At 25:15, on Alfa 159 you can turn off the beeping when you lock/unlock your car by changing the country to holland :)
Thanks, you're spot on, not just 159 but other models from that generation as well as GT, 147.
GT owner in the UK. I like the beep, lets me know it locked (not that anyone would steal it haha}
Hello when i try to connect on the airbag module with my elm327 connector and the red adapter on my 147 it says no response from ecu do i need a KKL (blue) connector in combination with the red adapter aswell?
Fantastic, to see and see many times. The equipment is not expensive, if you have the time to use it. I'd love to have the time to act on it. I haven't even had time to connect my new android radio....soon it will become obsolete😕
It doesn't take long to install, maybe couple of hours...
15:09 - Since I don't want to break my ABS unit and I want to change the old brake fluid, the garage where I'll go doesn't have the MultiECUScan but they use a pressure device tot change the fluid. I also have a 156 and they've done it straight, since I don't have any options in the MES for 156's ABS. So, if I change the brake fluid, I should to this first for GT and after that put in new brake fluid and use their pressure changing device? By the way, the brakes in my GT are worse than 156. :| They don't bite as hard as the 156 does. Both of them have the same Textar brake pads allarround.
You can change a brake fluid without using a MES or any kind of pressure device. The process is very simple, all you need is a buddy to pump the brake pedal, and you need to start releasing the fluid just as you would do when you do a brake bleed. Always start from the furthest wheel, and work your way up. Also you got to make sure that your brake reservoir is always full during the process, so it doesn't suck in the air. We might actually do the video on it, since I got to do it on my GT as well...
@@arcgarage I kow the process, but the buddy is not available unfortunately :))
Hi. Any tips on how to get the ELM327 adapter to connect to the ECU? I can only source V1.5 locally. I bought four different adapters but still no luck. It connects to friends cars and my Volvo but it does not connect to my Alfa 156 ECU. Tried choosing different ECU versions from the list but no luck. I even bought the Wifi and Bluetooth versions but struck out. Is there a specific cable that definitely works? I have a 2005 Alfa 156 2.0 TS
Great video! Thank you!
Thank you for support, cheers...
I'm curious about multiscan, as someone who likes to use his pc for software like inpa for BMWs. But I see on google apps there is a Alfa obd app for about $50 Australian. Hmmm
broo thanks for the settings I wonder why it couldn't connect to my 147 ts. I have that elm Bluetooth one but mine where at default something else. Gonna try to connect it again .
Try getting the elm cable from the video
@@arcgarage yes you are right. I didn't have any luck connecting to the ecu. I even tried another elm327 with usb but no luck. I don't know If Im going to get that cable since I have the "right side light failure" and a funny thing yesterday I managed to get rid of the left error by cleaning the plastic holder with sandpaper. But the right still can't remove the error. Maybe I should change the whole part. But the light functions its just the error I want to get rid off.
👍👍Awesome channel! Thanks for sharing the experience!
Thanks for watching, and thank you for support...
Great video!! Do you get the abs/esp/hill holder unavailable messages when you connecting the green adapter?
Thanks, those are the common messages that pop up when scanner attempts to scan those modules...
@@arcgarage Ooo good to know... I tought that there is a problem with my idiagnostics cable! Thank you for the input
You get the same messages with any diagnostic tool, no problem...
Thanks,very helpful video for a new user like me.I changed my calipers over and have bled the brakes but they are still spongy on starting so i think i have air in the abs system.If i want to bleed the Abs using multiecuscan,do you know if the car should be running?
I don't think so, follow the instructions in MES
Well my selespeed gearbox is stuck in first gear. It won’t change into any other gear. So that means I can’t start the car because it has to be in neutral. So I just wanted to know will multiecuscan diagnose the problem without it running. I’m just waiting for my elm 327 to arrive in post.
It might. But when I test for gearbox issues, I drive the car and follow the parameters looking for problems...
Very good,i have a problem my comand remote doors don t work can you help me ,my car alfa gt they have charge and sinal but do not open the doos
You need to reprogram it, here's the video ruclips.net/video/L3YOzHpW0Hk/видео.html
Hi thx for the video, good ..1 question this tools & software can WORK with fiat 2020 / 2021 ??? & jeep renegade 2020 and 2021 ??? Just to reset service thx
It should, thanks
Thanks a lot! Very useful video!
What cable do I need if I'm going to use only the free version of the program?
It depends on what you want to do...
@@arcgarage Main aim is scanning and clearing the fault codes, and maybe reading the live data. The free version supports these functions, doesn't it? What cable is needed for these tasks?
@@ЮрійГірич-т1с It does. In my case I can do it both with ELM and KKL cable, but make sure you check it with seller before purchase...
@@arcgarage Thank you very much! All the best to you and your Alfas!
@@ЮрійГірич-т1с No problem, thank you for support...
when you changed the ports before connecting to the airbag, is it just a downloaded port that you load that allows you to open the airbag system? or do you have a bunch of different adapters that unlock certain systems? Curious on how to check faults of all systems. Great video!
Thanks, it's different adapters
not sure if you know about race mode install on giulia 2.0 but you need to reset proxi alignment. I had to plug in the blue cable in first, success, then plugged the grey cable in & everything was failing. I restarted the whole process & everything worked. Now i have race mode but my door locks are messed uo. Sometimes they dont work when you press them, sometimes they do. Also the light on the door lock turns on/off when it wants to. Only had a couple hours in the car today but if you know where i would go or what i have to do to reset it, it would help A LOT! Thanks!!
Is it possible to turn off ”side light warning” without changing the bulb? I don’t want to see it every time I start my car, and I want to wait until main low beam (xenon) needs replacing since it is a bumper off job.
You can't turn off the warning, bulb replacement is the only solution...
@@arcgarage In fact, you CAN turn off the warning, by disconnecting the STATUS pin of the chip controller VNQ810M from the inside circuit of the Body Computer. That way you will never be warned regarding burned out bulbs as the BC will never get a signal for corresponding STATUS pin.
@@valeriudragnev5550 Yes, but that requires some modification, you can't turn it off using the software...
@@arcgarage Yes, that is rather a hardware modification. Anyway, it is a solution :) also it works for turn signal led hyperflash.
Thank you for your informative videos! 👍
It is a clever solution, thank you for support...
I am needing to use multiescan for a 2018 Stelvio without the SWG. Can you tell me what interface I would need to use? Thanks.
Not sure...
Hi I have problem with connection, only once I connect to a body 😑 I set up everything but once I connect then test for obd shows times out message and then connection failed check obd connection or port any advice 😀 thanks
Do you have registered version of MES?
@@arcgarage yes I have a full version I get second connection but it's disconnecting after a while and then again test for obd shows "time out"
@@marcinliss Does it tell you in lower left corner latency too high?
@@arcgarage no its set up on high speed obd and latency is 3800 so I presume that should be correct i have a all day tommorow to look on that again so I let you know 🙂 thanks for help 👍👌🙏
Sorted but I'm more happy that I sorted stering wheel controls, Asr and airbag 😁😁😁👍 thanks one more time for help 🙏👏✌️👌👍
Thanks for this video. Excellent.
Glad it was helpful
Does it work to program the remote key on fiat stilo? Which cable do i need for kkl or the colored?
It should, there is a video on remote programming, you got all the info there...
@@arcgarage a pokusat cu iman taj kkl kabel pa cu vidit. Dobio sam samo onaj rezervni preklopni bez tipki uz auto.
Hi ARC Garage. I have changed my speedo cluster, can I, and how can I program in the new cluster? ( got the blinking odometer) Just bought the MultiEcuScan program (50eur version) and the cables arrived today. I read that I can program new component to the car. but really don't know how.
Btw I've got an Alfa 147, 1.6 Ts spark 105 hp
Hi. Here is one of our previous videos, you've got everything explained there ruclips.net/video/ReZXYlgILAw/видео.html
Hello. which version of cable interface did you use in the case of connecting to body computer? I'm guessing ELM 327 v1.4???
Hi. Software is a Multiecuscan 4.6 registered version, the cable is ELM 327 modified(meaning that they solved the resistance issues)...
Hi, can i use this software for flash tuning my ECU? If not can you recommend different software?
No, you can't use MES for that, I would take the car to pros...
Bok. Vidim da ste naručivali iz Velike Britanije. Zanima em da li se sad naplaćuje dodatna carina i PDV pošto više nisu u EU?
Mislim da ne
Hi there ARC. Do I need all the cables or just the modified one? What's the difference?
It depends which modules do you want to access, if you want all, then you have to buy all cables except purple and yellow adapter...
Great video. Does this work for all models ... i see for AR 147 only 1.9 jtd ... does this apply on all models like Jtdm 8v or 16v ... are those supported?
Thank you, it works with all of the 147 models...
@@arcgarage Cao brate opet ja, sad pokusao da se povezem i meni je ona sa 8v al kad se poveze jedino mogu sa zadnja opcija 16v 24v i kad idem u body opciju nijedna opcija ne radi uvek ono elm327 -> not connected to ecu something like that (just like you have shown on the video, but you succeed to connect with last option)
@@davidstaniskov5160 Pozdrav, mora biti registrovana verzija programa
@@arcgarage pa to je i problem sto je registrovana
@@davidstaniskov5160 Jel krekovana verzija, ili si ju bas kupio?
Thanks for video! A question comes to my mind in this matter, is it possible to change (lower) the mileage on the odometer?
I´m about to buy a GT -04 with +11.0000 km on the road.
No, using this tool you can only increase the mileage...
@@arcgarage Ok, thanks!
Does the engine have to be running when using software
It depends on what parameters you need, but the key must be in ON position...
Thanks for the review 👌🏼 this would allow you to check if the odometer has been changed on any alfa if I understand right. That might be very interesting
Also I think I need to change one of my window computer as the window doesn't automatically drop a few cm when I open the door but does go down without a problem using the switch. Would I need to do a proxy alignment if I fit a new one? If so, I will need to get this program for sure
No problem, you're right. When it comes to window controls, try window reprogramming if you already did not, here's the link ruclips.net/video/Ph73_9_2KvU/видео.html. If you decide to get new unit, you need to do proxy alignment. You can do it with MES or any other good diagnostic tool...
@@arcgarage the resets works for a while but after getting in and out a few times it stops. I think the module is dying or something. Anyway you're a hero man helping keep Alfas going around the world 💪🏼💪🏼
Thank you very much for support...
Just a little update for anyone with the same problem;
My window wasn't automatically dropping a few cm when opening the door but was otherwise working fine so I changed the window module behind the door card and it's fixed 👍🏼
good video thank you!!
No problem, glad it helped...
MultiEcuScan webpage does not work
Great job ty
Thanks, no problem...
thx yiou
Thx bro
No problem, thanks for support...
Buenas tardes, disculpe. estoy necesitando el procedimiento para ejecutar el aprendizaje de la mariposa motorizada del Fiat Palio 1.8 8V 2007.
Descargamos la versión 4.6 y no nos da esa opción.
Podría indicarme por favor como se activa con este sotfware?
Gracias de antemano.
________________________________________________________________________________________________________
Good afternoon, excuse me. I am needing the procedure to execute the learning of the motorized throttle of the Fiat Palio 1.8 8V 2007.
We downloaded version 4.6 and it doesn't give us that option.
Could you please tell me how to activate it with this software?
Thanks in advance.
Check if that particular function is supported for that model...
👌
👍