I watched all your videos and I love it so much. I have one that i should share on the matter of fixing flat tires. I never trust cold patches. I use a small patch made from old lightweight inner tube. I glue it to my current inner tube using a yellow multipurpose industrial glue. A kind of glue that is flammable and has a really strong odor. It is generally used to bond materials like leather and rubber shoe soles in factories. You can find it in hardware stores any where. If you don't know what to look for just ask for "yellow multipurpose glue". Cut a patch from a strip of old lightweight inner tube, about 3x3 cm. Scrape the smooth surface with a grinder wheel (yes, I carry a grinder wheel in my toolbox) until in gets rough. Do the same to the area around the leaking point. Apply glue to the patch and the area around the leaking point. Let it sit for 15 minutes until it feels dry to touch. Stick the patch to the inner tube and apply pressure. Let it cure for about an hour and it will hold for a very long time. The longer the curing time, the stronger the adhesion will be. My rear wheel have 5 patches and they are still holding strong. I hope this tip helps. Have a save journey for the rest of your trip to Argentina. Greetings from Indonesia.
Pretty badass, a lot of people like me would want a blinged out trek or some beautiful name brand bike. You're totally utilitarian and focused on the adventure. That's why you're riding from Alaska to Argentina and I'm sitting on my couch lol.
Blinged out components feel great, but I just assume everything will break eventually, and I wanted something I could fix. But hey, as they say, you can tour with anything!
Nice build! Just a little thing I noticed. Your brake levers are on the wrong side. I ride in bad weather and the opening for the cable end in the lever itself and clamp bolt should face down to prevent water from getting into the cable housing and threads for clamp bolt.
Having toured through large parts of the world 26" wheels are still the most common option. Regarding your brakes - also the best choice. Keep it simple, easy to clean and fix.
I am trying a prop stick instead of a kickstand. It is long enough to hold the seat up. Padded on the end that goes under the saddle. It is about 39" long. A strong bungee or two to hold the brakes makes it like a three legged stool, stable on most surfaces.
The Pletscher are not that durable they are made from cast aluminium. The Hebie 0605 is the most durable double kickstand, it doesn't fold to the side and is made of steel it's also rated by Hebie up to 60kg but those type of stands only work properly if the frame has a welded/brazed on kickstand plate under the chainstays which is common on touring city bikes in Europe.
Good to know. I though about getting one, but ended up getting the Soma Fabrications kickstand. It works so far, not as stable as the Ursas, but it folds back better.
i love this build man. I found your channel by accident and I just love how down to earth and relatable your content is. I was watching a different creator doing the same Alaska to Argentina and now finding you gives me a cool additional set of videos to follow. Good luck, stay safe and keep us updated!
I just found you. And you are helping me with the same issues that you have. the only significant difference is.... Iam 73 years old. I was born in Argentina. lived in Canada for the last 55 years. time to come back to my roots. Nice to meet you.
Great build! I built a frankenbike from a 2003 Gary Fisher Wahoo, and have put on about 12,000km so far. Still need to tweak components, but I think that will always be the case! Great way to intimately know everything about your bike.
Love your Rodriguez bike, frankenbikes are the best in my opinion, especially for daily commuter and also for something very specific as touring since each and every single individual part is chosen to fit your particular taste as opposed to buying a full bike that was thought out by a stranger.
Good catch! They've been working out so far, but as another commenter pointed out, I should probably flip them so water doesn't get in. I won't be able to unsee it every time I use them now...
Super build. I Wonder if you tried straight handlebar? I have tried bar with 18° sweep and it hurt. But I like the idea of using the extrabars you using in the middle.
I admit I didn't try out many variations before going with the Jones Bar. I just wanted something that let me sit up straight instead of leaning over like my old drop bars. The aero bars are a great addition, though.
@@Crankingit okey, soo many bike-sites almost force people to go for dropbars as if it a non-brainer its better for touring. For me its a perfect fit with a couple of degrees and long barends, almost like the old fashion touringbars.
Well thought out and well done. Ubiquitous is a great word but common or more available when talking about wheels is a better choice. You dont want to exclude your viewers and get them to switch to the next.
As for kick stand ditch it for a tree or a post with a bungee or elastic rope. 3 ring cranks are a great choice and its hard to believe how well low end steel riveted ones work. As for the hubs Shimano or sram cone cup still rule. Had Sram 406 hubs after a winter of riding I peeled back the rubber guard to service bearings only to find clean factory grease still in them.
I recently got a new kickstand from Soma Fabrications. It works well enough, but isn't as steady as the Ursas. I lean when I get the chance, but I still like having a kickstand for when there's nothing convenient to lean against.
Pretty much any part on a bicycle can be changed. I am now on my fourth pair of tires. How long they last definitely depends on the quality of the tires. My first pair lasted about 9 megameters, then I got some worse quality ones that lasted bearly a megameter and a half.
It is easy to find a 20 teeth chainring that will fit your Shimano crankset. A company called Mountain Goat in Germany makes them in stainless steel. They take credit cards and ship worldwide. Very durable!
I'm late on this but -what bottom bracket do you use ? it's hard to find a good durable square taper BB these days. It's a vital piece of kit, you don't want it to break. -If you change your kickstand, Pletscher is the brand to go to.
I had a Shimano BB at the start, but it did start to fall apart in New Mexico, so I changed it. Don't remember what. I changed it again in Costa Rica proactively. Unfortunately, nothing lasts forever.
I had originally planned on using v breaks since thats what everyone recommended, but I found that they didn't clear my fenders. I haven't had any problems with stopping power, fortunately. Also, my old bike used cantilevers, so I'm used to adjusting them.
Depends, on long pavement sections I try to keep them high, around 60, but on long rocky or sandy sections, I drop it down to where there is some give, not sure the exact PSI.
Right, pedals are one thing I forgot to talk about despite getting shots of them. On all my previous tours I used clipless pedals because they were primarily on paved roads. Over time I started to wonder how much advantage they were providing. The shoes I had were uncomfortable and my legs got sore from pulling. So for this build I decided to go with spikey mountain bike style pedals. I picked up some generic black ones in a used parts bin, but they didn't spin so freely. A couple days before I left, my dad was at the bike store and just bought me this set. I think he wanted to give my bike some bling, and, being new, they have much less resistance. It was only after seeing this comment that I looked closely at their brand. I think they are Supacaz Kryptos.
Kid-Bike accessory? When I see bikes without stands propped up on whatever was handy that doesn’t belong to random dudes on bikes, or simply dropped on the ground, I can’t help but think of all the kids I grew up with that didn’t seem to understand what their daddies had to pay for their bikes. Aside from the 1st one, a 24” standard geometry thing from Monkey Ward iirc, I started buying my own bikes young & _used the kick stands._ Still do. The only bike I have that doesn’t have a stand is a CF Specialized Allez that’s basically a wall hanger. I do ride it, but when I do it’s a non-stop lap around a local loop & right back to the house. The go-to daily mile-maker, a 1990 LeTour, that has a stand, & of course the town bikes & touring bikes do as well. Why would anything _but_ a full-on race bike not have a stand?
I watched all your videos and I love it so much.
I have one that i should share on the matter of fixing flat tires. I never trust cold patches. I use a small patch made from old lightweight inner tube. I glue it to my current inner tube using a yellow multipurpose industrial glue. A kind of glue that is flammable and has a really strong odor. It is generally used to bond materials like leather and rubber shoe soles in factories. You can find it in hardware stores any where. If you don't know what to look for just ask for "yellow multipurpose glue".
Cut a patch from a strip of old lightweight inner tube, about 3x3 cm. Scrape the smooth surface with a grinder wheel (yes, I carry a grinder wheel in my toolbox) until in gets rough. Do the same to the area around the leaking point. Apply glue to the patch and the area around the leaking point. Let it sit for 15 minutes until it feels dry to touch. Stick the patch to the inner tube and apply pressure. Let it cure for about an hour and it will hold for a very long time. The longer the curing time, the stronger the adhesion will be. My rear wheel have 5 patches and they are still holding strong. I hope this tip helps.
Have a save journey for the rest of your trip to Argentina.
Greetings from Indonesia.
Love the simple utilitarian build here
Thank you! Not sure if it's true, but having a non-flashy bike makes me feel like it's less likely to be stolen as well.
Pretty badass, a lot of people like me would want a blinged out trek or some beautiful name brand bike. You're totally utilitarian and focused on the adventure. That's why you're riding from Alaska to Argentina and I'm sitting on my couch lol.
Blinged out components feel great, but I just assume everything will break eventually, and I wanted something I could fix. But hey, as they say, you can tour with anything!
Nice build! Just a little thing I noticed. Your brake levers are on the wrong side. I ride in bad weather and the opening for the cable end in the lever itself and clamp bolt should face down to prevent water from getting into the cable housing and threads for clamp bolt.
Good catch! I had no idea! I'll fix it next time I do major maintenance. Thank you!
Great build! It's nice to see others going for durability. I'm so tired of everything being flimsy because people fuss over weight.
Totally! Though when things do break down eventually, it feels doubally bad.
All about utility and durability - love it! Ride safe. Greetings from Germany
Having toured through large parts of the world 26" wheels are still the most common option. Regarding your brakes - also the best choice. Keep it simple, easy to clean and fix.
The advantage of three chain rings is that to down shift you go from a larger to smaller sprocket. Easier to do under pressure than the rear shifter.
Nice build! Triple chain rings are great. Good luck! Thank you for sharing your adventure with all of us 👍🚵♂️
I am trying a prop stick instead of a kickstand. It is long enough to hold the seat up. Padded on the end that goes under the saddle. It is about 39" long. A strong bungee or two to hold the brakes makes it like a three legged stool, stable on most surfaces.
My wife and I have used Pletcher double kickstand for years. Great product!
The Pletscher are not that durable they are made from cast aluminium. The Hebie 0605 is the most durable double kickstand, it doesn't fold to the side and is made of steel it's also rated by Hebie up to 60kg but those type of stands only work properly if the frame has a welded/brazed on kickstand plate under the chainstays which is common on touring city bikes in Europe.
Good to know. I though about getting one, but ended up getting the Soma Fabrications kickstand. It works so far, not as stable as the Ursas, but it folds back better.
i love this build man. I found your channel by accident and I just love how down to earth and relatable your content is. I was watching a different creator doing the same Alaska to Argentina and now finding you gives me a cool additional set of videos to follow. Good luck, stay safe and keep us updated!
Thank you! I'm glad to have you following along! There are a lot of great Alaska to Argentina tubers out there.
Nice build, don't mind the latest technologies that cost a lot of money. It's an ATTB, an All Terrain Touring Bike. Have a nice and safe trip.
Thanks! ATTB, I like it.
Superb build. Definitely taking inspiration for my own, thanks for sharing
I just found you. And you are helping me with the same issues that you have. the only significant difference is.... Iam 73 years old. I was born in Argentina. lived in Canada for the last 55 years. time to come back to my roots. Nice to meet you.
Glad to be be of service! Let me know if you have any questions!
I know almost nothing about all of this. Impressive and awesome presentation. 👏
Great build! I built a frankenbike from a 2003 Gary Fisher Wahoo, and have put on about 12,000km so far. Still need to tweak components, but I think that will always be the case! Great way to intimately know everything about your bike.
Solid bit of kit .
Love your Rodriguez bike, frankenbikes are the best in my opinion, especially for daily commuter and also for something very specific as touring since each and every single individual part is chosen to fit your particular taste as opposed to buying a full bike that was thought out by a stranger.
I think that's what I liked most about building, weighing the pros and cons of each component varient.
@@Crankingit absolutely, thanks for sharing these videos 👍
After market front guards are available from ALOT of companies.
Good luck bro!
Brake levers upside down? I guess it doesn't effect use tthough
Good catch! They've been working out so far, but as another commenter pointed out, I should probably flip them so water doesn't get in. I won't be able to unsee it every time I use them now...
Nice!🎉
Dude we just watched your episode 3 - can't believe you were that close to the wildfires!
It was crazy. I'm glad it was downhill, or we might not have gotten through.
Super build. I Wonder if you tried straight handlebar? I have tried bar with 18° sweep and it hurt. But I like the idea of using the extrabars you using in the middle.
I admit I didn't try out many variations before going with the Jones Bar. I just wanted something that let me sit up straight instead of leaning over like my old drop bars. The aero bars are a great addition, though.
@@Crankingit okey, soo many bike-sites almost force people to go for dropbars as if it a non-brainer its better for touring. For me its a perfect fit with a couple of degrees and long barends, almost like the old fashion touringbars.
Well thought out and well done. Ubiquitous is a great word but common or more available when talking about wheels is a better choice. You dont want to exclude your viewers and get them to switch to the next.
Not what I'd have built. But like you've said: It's your bike, and therefore it's perfect. 😊
How did it do in the Darien Gap?
Nice!
As for kick stand ditch it for a tree or a post with a bungee or elastic rope. 3 ring cranks are a great choice and its hard to believe how well low end steel riveted ones work. As for the hubs Shimano or sram cone cup still rule. Had Sram 406 hubs after a winter of riding I peeled back the rubber guard to service bearings only to find clean factory grease still in them.
I recently got a new kickstand from Soma Fabrications. It works well enough, but isn't as steady as the Ursas. I lean when I get the chance, but I still like having a kickstand for when there's nothing convenient to lean against.
Bro !!! 😂 ..... I AM doing the same thing now .....building My bicycle to Alaska /Patagonia trip 😂😂😂😂...... Maybe SEE you on the Road man 👍
Nice! There is something special about riding a bike you built yourself. Though if something goes wrong, you have no one to blame but yourself!
Got my popcorn... wondering if those rims are gonna make it. taco'd more velocity deep v rims than I can count!
Would really recommend the H Plus son todestreib. I have 2 that are basically new and I would send them to you if you need!
cliffhangers are a different story than deep V's
Yikes! They've been working pretty well so far, but I'll keep you in mind if they do fail.
muy bueno!
At the time of this video 2.46, you put those screws in. That can be done or you took it to a workshop.?
I think that's awesome
You can change the handlebars of any bike, and how long do the tires last, how often do you change them?
Pretty much any part on a bicycle can be changed. I am now on my fourth pair of tires. How long they last definitely depends on the quality of the tires. My first pair lasted about 9 megameters, then I got some worse quality ones that lasted bearly a megameter and a half.
Can you guide me step by step, with questions
It is easy to find a 20 teeth chainring that will fit your Shimano crankset. A company called Mountain Goat in Germany makes them in stainless steel. They take credit cards and ship worldwide. Very durable!
Looks like a sweet company. I think my crankset is riveted, though, so I can't change just one ring.
I'm late on this but
-what bottom bracket do you use ? it's hard to find a good durable square taper BB these days. It's a vital piece of kit, you don't want it to break.
-If you change your kickstand, Pletscher is the brand to go to.
Nice build, otherwise. I hope you have a great adventure.
SKF makes one. Or the IRD middle range ?
@@tinatpasselepoivre They're outrageously priced the SKFs.
@@Desi365 yes but they will probably last and last, and last even in rough conditions.
I had a Shimano BB at the start, but it did start to fall apart in New Mexico, so I changed it. Don't remember what. I changed it again in Costa Rica proactively. Unfortunately, nothing lasts forever.
Perfect
Why cantilevers and not v-brakes? The braking power is so diferent
I had originally planned on using v breaks since thats what everyone recommended, but I found that they didn't clear my fenders. I haven't had any problems with stopping power, fortunately. Also, my old bike used cantilevers, so I'm used to adjusting them.
I just subscribed!
Very cool. What psi do you run in those fat tires?
Depends, on long pavement sections I try to keep them high, around 60, but on long rocky or sandy sections, I drop it down to where there is some give, not sure the exact PSI.
hey! awesome build! what pedals are you using?
Right, pedals are one thing I forgot to talk about despite getting shots of them.
On all my previous tours I used clipless pedals because they were primarily on paved roads. Over time I started to wonder how much advantage they were providing. The shoes I had were uncomfortable and my legs got sore from pulling. So for this build I decided to go with spikey mountain bike style pedals. I picked up some generic black ones in a used parts bin, but they didn't spin so freely. A couple days before I left, my dad was at the bike store and just bought me this set. I think he wanted to give my bike some bling, and, being new, they have much less resistance.
It was only after seeing this comment that I looked closely at their brand. I think they are Supacaz Kryptos.
Disc breaks is everywhere
Yep, that's what I'm starting to realize.
Cool
Thanks!
Kid-Bike accessory? When I see bikes without stands propped up on whatever was handy that doesn’t belong to random dudes on bikes, or simply dropped on the ground, I can’t help but think of all the kids I grew up with that didn’t seem to understand what their daddies had to pay for their bikes.
Aside from the 1st one, a 24” standard geometry thing from Monkey Ward iirc, I started buying my own bikes young & _used the kick stands._ Still do. The only bike I have that doesn’t have a stand is a CF Specialized Allez that’s basically a wall hanger. I do ride it, but when I do it’s a non-stop lap around a local loop & right back to the house. The go-to daily mile-maker, a 1990 LeTour, that has a stand, & of course the town bikes & touring bikes do as well.
Why would anything _but_ a full-on race bike not have a stand?
I agree! But everyone else on the GDMBR was leaning and laying their bikes down!
Uhhh 😬
Darien gap ??????
Yep, I'll have to take a boat.
Get a click stand.
I considered it, maybe if the replacement kickstand I got doesn't work out.
Go tubeless. You'll never regret it.