VIM Tools Reacts to a deep dive on the company by The Den of Tools. Tool Tuesday Ep. 63
HTML-код
- Опубликовано: 15 янв 2024
- The Den of Tools recently posted a video titled ‘Who The Heck is VIM Tools?’. There was a lot of information shared in that video. If you’re looking for more insight on our company, what we do, and who we are, this should answer a lot of your questions!
Big thanks to @denoftools for taking the time to research and share this information with his audience. If you have any more questions about VIM Tools, don’t hesitate to ask! Comment down below.
Follow us on RUclips for new episodes of Tool Tuesday every week where we showcase different products, provide updates, and answer questions.
You can find all of our products at our website below. Or ask your local tool truck about us if they don’t carry our products already!
www.vimtools.com 
Авто/Мото
Wow this is a first, a company reacting to a video about them openly and honestly. I love this I just wish more companies would make themselves available to their buyers. Rock on!
Jeff, I was going to email you a link to this video but you are on top of it😅
Thanks for making the video and prompting this reaction; was great to learn more about the company!
Im digging that they seemed pretty honest. Speak volumes about the company.
Love seeing VIM thriving. I bought the 26 piece master hex socket set almost a decade ago and it’s still in heavy use today. Actually looking to buy a new fresh set for a back up.
I agree Jeff wish more companies would do this @The Den Of Tools
I can’t imagine another company responding to Jeff’s deep dive with the professionalism and respect you guys exhibit. Awesome job, gentlemen! VIM is definitely on my radar now.
u rite, "professionalism and respect"
I first discovered VIM a little over a decade ago. Bought a set of torx bit sockets branded Durston. They were sold by a third party and were CrV steel and not particularly good. I called Durston to warranty them, and the rep told me the third party requested CrV because it was cheaper, and I should check out the VIM branded versions made of S2 tool steel. Bought the torx and hex master sets. What really impressed me was that VIM said they’d warranty any bit or bit socket even if used on an impact, no questions asked. And they had the replacements for that original set to me in 2 days. Been a fan ever since.
Crv is for cold weather use. anywhere stuff even drilling rigs are used in real cold, as strength drops fast after minus 30 (oil patch) ,the tool to a drill rig uses Crv steel.
@@91rssinteresting, I had no idea.
I'd say you guys are the only company that doesn't need people speaking for you. It's truly appreciated that you're the only company I know of that has gone above and beyond to be open and interactive with the public, even though you primarily supply sellers
Open public communication is a rarity
I watch Den of tools. ❤️. Den of tools how I found you. I really am impressed with your transparency. To be truthful I’m so use to companies creating a marketing language that’s not transparent that you have to constantly have to read between the lines to try to determine is the product everything they say it is. Actually communicating and explaining rationally,,,, like I’m sitting relaxing in a chair in the same room is so refreshing ,,,,,,, it is so not the norm. You have made a new customer.
I've got some of your tools, a tad expensive, but the quality is there! Glad you didn't rip into The Den of Tools too much. He is a decent guy.
If only more RUclips channels and brands could be as respectful and discuss things like adults. Between you guys and Jeff at @DenofTools there are at least a few in the tool game that can. I'm sure there are more, but seems like most just name call and insult and are hard to listen to for more than a couple of minutes. Everyone can teach AND learn something no matter how much they think they know.
Glad to see many being respectful in that process.
If it matters, I own several VIM made tools and am a master mechanic with over 40 years experience working out of Kissimmee, Fl.
Great explanation of your family’s company, as I’m a follower of the den of tools I took interest in his deep dive of your company and you’re probably right about the amount of time he spent doing research especially going back to the 1930s. Always nice to see an American company doing well and also interesting to note that you actually are producing some stuff here in North America. If you’re interested in bringing back more production to North America I hear there’s a nice new plant in Texas that just got abandoned!😂 good luck in your future endeavors, Mike from Montreal.
Ok fellas i want my credit for defending you guys and commenting on his vid that yall have a yt channel and you interact with subscribers/customers
So nice to see this video reaction to Jeff’s video and filling in the blank spots. As a professional technician I have seen your tools on many trucks but do not own any currently. As a fellow Floridian I plan to add some of your tools to my line up soon. I always like to promote fellow Florida businesses as I myself work for a small Florida company.
VIM is great. You’re pretty transparent in my opinion. It would be great to see you guys possibly do some ambassador sponsorship.
Prepare for an uptick in sales! Ive never heard of you guys, but i will be buying some of your tools, soley based on this reaponse to Jeff. You guys have your shit together, and i respect that. 🤘
Since early 2000s i have been using VIM in the autobody world
You guys will be in business for a long time. With the economy turning, you need to be on the good side of dependable, good quality tools and products. It seems like you might be there already. Keep on doing what you're doing. Responding immediately to mis-information is excellent. Rumors about tools in the automotive industry are tough to stop without customers that will back you up regarding company policies, tool quality or where to buy them. I joined this page for information about your tools myself.
It’s the ethos of a tool company that makes it what it is, Japanese company’s usually make one type of thing so it’s the best possible product like Koken, and Fujia, the only difference is instead of of making it they get it made by people who are the best at making it and sell it themselves add their style of open public communication the skies the limit for them
@@kennethhanes5438 JDTCo does the same/similar thing along with many other types of rebranding companies. it's a good business model to grow from.
RO guys, i didnt think Jeff was negative per se, ive been watching him , subscriber etc. for many yrs and he does look out for his subs, cuz as you know... there are a lot of fly by not crap out there, i knew of VIM thru my pop, he's 92, im 58, it was GREAT to have you guys respond!
As a machinist who watched metal part manufacturing move overseas in the 80’s i appreciate the American made family owned manufacturers and as a user of automotive tools i understand the tools that are made by VIM and sold under different names! Thank You for the response you just gave us. And this was a good free advertisement.
Thank you for clearing up the warranty issue, My guess is that Jeff might do an update or put a link to this video. I guess its time to shop I like green
I have a VIM bit set and wrench extender. Nice stuff. The wrench extender is heavy, and has a nice handle. Hopefully someday we’ll see more Made In USA stuff. Keep doing what you are doing!
VIM is great, they have solid tools worth trying
Jeff’s video was respectful as was this response.
Koon trucking turned me on to VIM. Love your ratchet adapters and extensions.
I love your tools and I pick them up from my Matco and USA Tools trucks. I wish you guys had a store front in Tampa. I would probably stop by at least once a week for something lol. Besides the quality of the tools the videos and transparency are what makes me a fan.
Great follow up to his video. Very transparent. Definitely deserves a follow and a tool purchase.
You guys need a podcast, y’all are fun to listen to.
Love the video I watched to the end , and love the products! Keep up the awesome work boys, your killing it
Let's hear it for the dachshund curled up and sleeping through the video all chill and relaxed! You all are excellent communicators, cool video.
Y'all are pure class! and GREAT tools.....
Great video. I was happy that you guys filled in some of the information that Jeff from Den of Tools did not have available to him. Jeff is a good guy and I love his content. As a DIY'er who fixes and maintains his own equipment I first became aware of VIM Tools from Clay from Koon Trucking. He has, over the years, introduced me to a ton of your tools. I wasn't aware that you had a RUclips channel until this video popped up on my feed. I am happy to say I am now subscribed to your channel. Keep on, keeping on.
same! what a fukkd up algorithm, such crap, i watch Clay, etc. etc. and i was NEVER EVER never shown VIM in my feed, ever
Really enjoyed the video, watched to the end. I appreciate you guy's answering and filling all the blanks that Jeff didn't have all the info for. The wrench extender you guy's offer is top notch.
I'm a young technician in the Tampa area and found it super cool that y'all are in the area. Have some of the tools and have used some tools from coworkers that yall make. I thoroughly enjoy them and love the green.
This is great! VIM seems like they are going to do great things! I def know of the tools youve made for other companies but cant speak to that fact specifically,but youre right. VIM has always made good tools and now youre finally out on your own and able to really make an impression and hopefully take the tool world in a whole new direction. Nothing more pleasing than a small family owned company doing well here is the USA 🇺🇸! TO INFINITY ♾..... AND BEYOND 🌎
I really appreciated both the deep dive by Jeff, who I follow, as well as the detailed response to provide more information about Vim Tools. I was also curious, and have heard good things about the products you sell, but have never tried any of them. I won't hesitate to try them now and will subscribe to learn more about your tools going forward. In all fairness, your rapid growth should be transparent as well as admired. There are so many foreign companies who do not disclose who the really are that are less than ethical. They seem to appear out of nowhere and are instantly a big player on a global level. If I had to guess, the reason they try to remain invisible is because they are constantly staying one step ahead of the lawsuits that inevitably follow them.
This is how a company should respond to questions. A+. Also having the dog center frame. Chef’s kiss. Jeff needs to get paws on some Vim tools and review them.
Appreciate y’all I saw his video and let him know VIM rulz!
Watched the entire video. Very fair, honest, interesting information. I'm definitely going to purchase Vim tools in the future. Like the green tools, too. Thank you for the time to respond to the Den of Tools video. I've followed Jeff King for sometime he's a straight shooter, no fluff reviewer.
VIM Tools.. Nice reaction video. I want to get some of your tools to try out and review. Well when the budget allows it. Thanks for sharing.
It would be helpful if you introduced yourselves and told us what you do with VIM. Appreciate the information, but how far back do you go with VIM Tools?
I thought they addressed that for the most part. But what specifically did you want to know?
@@cpzmelbs I was hoping to know who was talking and their relationship with the company at the outset. That helps me to know if I will get accurate info if I stay tuned. I do like the VIM tools I have seen, and I understand Meta frustration.
@@thomaslee6067 yeah thats fair and I agree, it would have been very helpful. they did address it in response at the relevant moment of the dens video. I think they were purposely reacting to the video chronologically. But it could be thought of as reduntant given its another video on there own channel, therefore, who else could it be.
Despite having the knowledge already, the answers to your specific questions arent exactly clear and concise from the video alone.. but they should be
What a great response to The Den Of Tools video 0:33
Appreciate the video,i am a snap on, mac, matco guy through and through.i will definitely be buying some of your tools.btw, i am not a mechanic by trade .just a guy that takes care of his own stuff while preferring quality tools!
u here in Prescott?? aint no other whiskey row
I was made aware of VIM tools from the Koon Trucking channel. He has been to their headquarters a few times and was able to give use viewers a insight to many of their tools, especially all the new tools being released. I have purchased a couple based on his recommendation. The quality is up there with any other brand. My latest grab was their bit set. All the bits are S2 steel.
Just let the record show I like your products! My question is why was Nobu so unimpressed with this video? He seemed like he’s heard all this stuff before.
Anybody that allows their dogs in the office is OK by me!!!!! You folks are on my radar, as someone else mentioned. Shine on......
Just want say because of this vid and how you 2 young men handled yourselves on this video i will now be on the look out for vim tools. Iwatched the og from den to kill time at work. Then went down the rabbit hole to your vid. I work in refineries and chemical plants so im always on the lookout for good tools.
This is top notch. Will be shopping from VIM in the future.
With so many people on the internet espousing prejudice, or ignorant, opinions, I really pick and choose who I pay attention to. Jeff, from Den Of Tools, seems to be pretty solid. Either through experience or research, he is pretty solid.
I am happy, and impressed, with you coming out with this level headed and informative response video.
Keep up the good work 👌🏼
Thank you guys for responding to Den of tools video and I will definitely subscribe to your channel.
I don't have any of your tools but after watching this I would not be afraid to buy them and actually looking forward to try some. Thank you
Very good reaction video. I have a few of your tool (VHC77 and some ratchets). Really nice stuff. You definitely have me curious about your private labels!
Especially impressed now that I know your size. Bravo!
HMU if you need digital advertising help!
Great job guys, thanks!
In 2005 I bought a vw. Needed a triple square, never heard of it before that. Found vim. At the price thought ok if it last a couple uses no big beal. Fast forward many vw later still have the set, and the still work good. If I could break them I would upgrade……to a newer vim tools triple square.
Wow! You guys just confirmed for me that you are honest, family owned and operated. Keep the simple honesty and continue being approachable by your customers, and you will explode in sales and trust. Now I gotta decide what VIM tool to try first.
thanks for the follow up boys, love the brand, I saw his vid n was happy to see yours love 2 hear yalls gr8 american history
Yes it was a long video but I appreciate the fact that you clear up some things and really explain who you are and where you came from. I will definitely check out your tools.
Jesus guys, I graduated high school in 1997, congratulations on being where you are at this point in your lives. I think Jeff may not have had a grasp on VIM not being in the industry, every truck regardless of brand has VIM tools up front and they sell great. I've reviewed a bunch of your stuff on my little channel, Im at 548 subscribers I believe and I watch you guys all the time. Your products are solid and you guys are real people, keep yourselves accessible and continue to be friendly to your followers and youll have customers for life.
Appreciate your open and honest comments which made me feel very positive about buying your tools.
Nice job, I really enjoyed your presentation. Thanks 👍
Gentlemen, thank you for your response to Jeff's video. I was unaware of your tool brand until he released his video, and between his video and yours, I now know a lot more (quite a bit now vs. nothing before) about VIM tools than I did. I appreciate Jeff's channel for the information he provides, and I appreciate your candor and clarification of the information he provided when it wasn't completely clear.
These guys are the future of the tool world. Doing things the way they should've always been done. Keep up the good work guys.
Great video very informing !!
I have some of their XZN bits and 3/8 drive. They are great tools, been using them for 10 years now.
I like this style of video as well as your usual vids. Good information here that a lot of us were curious about.
Great response. Thank you for sharing.
I bought oil filter adapter sets on sale maybe a year ago and they are great best quality I have seen by far
Any company that puts a Dachshund in their vid is ok in my book. In fact, mine was curled up in a ball like that as I was watching. I'll be checking out your tools.
I never heard of Vim before. Den of Tools gave you a pretty good reference. I am not in the market for your tools, but I am a retired mechanic so I love tools. Maybe I will need something and I will give your tools a look.
I have been around tools since I was 9 years old, and my father worked for a company that made parts for both Ridgid and Proto Tools, plus in school I trained in wood working, metal shop, small engine repair AND two years of vocational auto mechanics AND I have never once seen or heard of VIM TOOLS either!! So I watch The Den Of Tools, to get my fix on all things tool related and they (The Den of Tools) does do an amazing job talking about brands and tools available from these companies!! Personally I am still growing my tool collection, even though I am not disabled and can't work anymore!!
Nicely done! Been a customer since the late 1990s. Keep up the good work.
I have been following and subscribed a long time....I love what you guys do,and I love your tools.I think that its great the relationship you have with the public and the direct connection here.Many tool companies out there and I personally believe you guys stand out as nearly the finest Taiwanese tool manufacturers.Every bit as good as say snap ons Blue point tools..if not better.
They've probably made a considerable amount of tools branded as Blue Point…
Great vid guys. Love the products you offer. Keep it up👍👍
Thanks guys for doing this video. It was very informative.
Made it to the end of your video, walked away with curiosity and interest, thanks for sharing.
I watched both videos and I think they are BOTH well done👍👍
I knew this brand HAD TO BE AWESOME, WHEN I SAW SOME VIM ON TOOL TRUCKS! MANY MANY YEAR'S AGO!!!
Now we know keep up the good work. Enjoyed the video .keep the tools coming !! 😊
Best thing you could do now is send Jeff a plane ticket to Tampa and give him the full tour. He’ll surely be impressed and you’ll get a nice chunk of his quarter million subscribers. Then hire me. I’ve got over 20 years experience in the tool biz. Manufacturing and marketing, and recently retired.
I would follow up this comment with an email to them.
Thanks guys, good job. Made it to the end.
I didn't know about VIM before DOT's video. And to see your response and breakdown of Jeff's video speaks volumes about VIM as a company. You guys rock! And just picked up another sub and fan!
I sell several different brands of tools independently. I made kind of made my own tool truck service for heavy equipment guys and farmers in my area. I started selling VIM tools through a wholesaler I deal with. I started selling VIM through them because I had a few unique VIM tools of my own that I like. Seeing a response like this from a company is kind of nice. Not to mention, as a small business owner and tool seller myself, I really appreciate you guys kind of encouraging the consumer to go with a local business or dealer for your products over online monsters like Amazon. That’s much appreciated. This may encourage me to look further into VIM and possibly work with you direct.
I saw this as soon as it came out and I definitely added a comment because I do have some tools and recently bought the DD3 ( And got one for my brother for Xmas) and love your tools. I think it says a lot that you are not sending free stuff to people for any paid reviews the fact that you can say that you have never done that with all the videos/reviews online is refreshing and welcomed. I like the longer videos myself, but I understand that other people may not want that. I say keep doing long ones or maybe just edit one short version and have a short and a long version so people can choose. Great video as always! Oh and How bout them Buccaneers!!!
Absolutely enjoyed it and definitely made it to the end. The man to the left in the hat, I've seen you in quite a few videos done at Sema and you're absolutely great.
Started at the JDTco, then Den of Tools, and now here. I will say, how can Den of Tools not know about VIM... thats mind-blowing.
Like this content! Keep up the great work 🤙
I loved this. I happen to be in the ever decreasing percentage of people left with a long attention span, so the length doesn't bother me; it's always about the content for me. I personally would like to see more of this type of content from you guys.
I have a set of big bits for a hammer impact the are VIM tools and have used multiple times. Will be looking into more. Always love a wild variety of tools. Hope you keep getting bigger
Great video, honestly probably two of my favorite videos ever! I follow both VIM and Den of Tools and this was an awesome interaction. So much on social media and RUclips is just opinion based or not very factual, Its pretty cool to see kind of a back and forth conversation I guess you could call it between two very popular pages. No hate or bashing on either side just facts and speculation clearly stated and discussed or replied to. Right on!
I have heard of you guys before but I havent thought much of it. I figured you guys were just another off brand manufacturer. With this video and den of tools. Im definitely more interested in filling my box with your tools. I also really appreciate the social media presence alot! Interaction and seeing the face of the company does a lot in building trust.
Thank you for this video. Nice to meet Vim Tools.
Great response to Jeff's video. I have had the opportunity to meet you guys at SEMA a few times now and can say that you guys are as respectful and passionate in person as you were in this video. Looking forward, is VIM able to manufacture tools in the USA aside from the bits? None of this made in USA with global components crap that SBD likes to do.
This was great. You all seem to be a class act. Oh and I made it to the end
Good info guys. Keep up the good work
Thank you. I am very impressed. Obviously you guys are young, but not inexperienced. You explained things well, cleared up misconceptions, and represented your company and yourselves very well. I'm sure your Dad is proud of you and can be very confident in turning it over to you in the future. It comes through that you are very passionate about your work and keeping up the high level of quality in your tools.
The more personality you give your brand the better it is good vid
Hey guys. Mr Bear as we refer to Jeff as. He suggested and linked this video. I am pleased to see your response of his video. I subscribed for that reason. Letting the dog stay in the video is a plus. I would guess NDA agreements prevent you from saying who you make tools for,so I won’t ask. Great job.
I will be filling out the inventor application. Love to see more info on your brand. Will definitly be giving you guys a better look.
Good video & I made it to the end! Keep up the good work
I'd never heard of Vim before watching his video on y'all but between his video and your response I'm definitely going to check y'all out.
I like to work on my own cars as a hobby and I always could use more tools. I'll check out that catalog later today.
Sounds like a stand-up company. Ill be checking them out
I watched a VIM tool video a few weeks back and then the Den of Tools video. I saw this video to get more information. They look like good tools!
I buy your tools through my Mac dealer and I asked him to order me the DSPA200 and he said it wasn’t in the system I know it’s a new product how long does it take for the tool trucks to get access to the new products?? Great video I enjoyed the background on the company
I appreciate you two telling us the facts behind Vim. I’ll follow. I’m way too old to buy new tools but…..😮
Thank you for a great video.
Great video. I did watch the whole thing. Very interesting behind the scenes information. I subscribed on RUclips and will on Instagram also. Definitely will be investigating VIM tools in Colorado. Keep up the great work and tradition
Enjoyed the video, you guys show make more videos like this.
How did you guys get the Robo Grip patent from Craftsman? A coworker “lost” my Robo Grip that used to belong to my dad. Been wanting to get one off of eBay, but one day I saw on my Gearwrench dealer’s truck had the Orca/Robo Grip. I had to have it, glad you guys make it now.