A point i forgot to mention in the video so ill pin it here in the comments: I think it would be beneficial if Mini GT took the money that they are spending on exclusive models and events and put it towards improving their products. Events are a great way to connect with fans, but that seems to be their main focus lately. And the event models as a whole is a discussion for another video
Well I got my first MiniGT and it had one QC issue - the back wheel wouldn't roll. Seeing as screws were used to hold the model together, I took it apart to look for the problem. It was the wheel arch, it hadn't molded right and there was a line of crap metal along the edge stopping the wheel from rolling. Fortunately I build model kits as another hobby and I have a set of diamond files. After some filing, I managed to remove the crap and the wheel was able to roll.
The CEO said publicly that last year he threw half a million dollars worth of miniatures into the trash because of quality control. In addition to working under pressure, they are unable to deliver certain models with specific dates on time. I hope they can overcome this problem and don't forget that you can ask for a refund on these faulty models.
Yeah throwing that many models in the bin right off the assembly line is a huge problem as well, but it seems that they're being more lenient and letting more and more bad models slip into the market. And it also feels bad to return bad models since it's also not the sellers fault
I watched one interview with the CEO and we're screwed. The CEO said if you want a higher detailed model car, there will be a bigger margin of error. He then said everyone has QC issues including Ferrari. Well let me say this - if I dropped a ton of money on a brand new Ferrari, it had better be 100% perfect. If there is a single scratch on the leather seat, it's going back to the dealer.
@@minthouse6338 I'm not sure if you aware of this, but that mindset is too naive. Not even real Ferrari has the best quality control. Yet you expect way more on relatively mass-produced scale model that cost few dozen dollars. Few years ago, Ferrari themselves has problems with thousands of 458 & 488 because of brake issue. About a decade ago, they already noted 458 because some of them burst into flames
Good point, MiniGT seems to push their production and gain more customer through event or anything like that, and yet they're fall behind from quality control. I've seen so many people complain about Mini GT issues, and that's makes me quite hesitate to buy my very first Mini GT. These item aren't cheap, and yet customer got sub quality product
That was a good video, mate! I've been following Mini GT since the very beginning, but only this year I started collecting; I've only got 3 cars so far (a 4th one is on the way) so I can't say I have a large sample quantity, but I do have a few points to make. Firstly, I should say I'm rather lucky that my cars are 98% issue free, so much that I'm genuinely impressed. However, my MAJOR gripe is the wheels : on 2 of my 3 cars, they're wobbly, one of them being much worse than the other. It doesn't detract from the model when stationary but when rolling, it's really irritating. The other issue is the axle length; sometimes it's so extra wide (almost 1mm), more than it should be, that it makes the car slide side-to-side, and that is equally frustrating. Also, on my Alpina, the rear exhaust piece had not been glued properly and was loose, which I had to glue back on myself. Other than that though, I don't think I have many complaints, I am enjoying buying Mini GTs (they remind me of Matchbox for some reason) and I just hope they don't sacrifice quality in favour of churning out more models.
I've been thinking the same. It's sad to see them slowly lose quality they once had. Hope they fix it, especially cause you can't even see the car you're buying, very unfair on the buyer.
I think this is a good point. Unless you have a hobby shop near you (which I don't and many others likely dont) then you can't see the model until you have it in person
This is similar to my TLV collection having an insane paintrash percentage. I'm glad to see another channel complain like I do calling out all the BS garbage we see in 1/64. Keep it up since I've already started phasing out 1/64 from my collecting.
When hot wheels have issues (specifically the mainlines) it is what it is after all they are only $1 however considering MINI GTs typically start at $10+ you’d expect the quality to be there
The biggest issue I have with MiniGT and Kaido House are the wobbly wheels. Drives me crazy. One of my R34 Kaido chases rolls like it's sitting on eggs.
Mini GT has been quite popular lately in Indonesia. Not because of the new good casting or other good things. But there was one customer who experienced something surprising from the Mini GT service team. He bought a Mini GT R34 Top Secret factory seal, but after opening it was very surprising that one right stop lamp was missing, not loose. After he reported it through customer service, the application was rejected because the product was purchased through a distributor, then when reported to the distributor, they rejected it on the grounds that it had been opened. This moment makes me afraid to buy the latest Mini GT...
i got the Ford Gt le mans from mini gt, the car is great on its own, but yeah some quality issues can be noticed, for example the front wheels not rolling sometimes, and the worst that happened not so long ago, the spoiler broke down after doing the slightest movement with the car, it didn't even fall to the ground or hit anything hard, i tried using glue to fix it but it didn't work, so I'll probably just make some sort of custom with it without the rear spoiler, or maybe make one on my own but made of aluminum in order to give the car its original look with the rear spoiler, i am fine with the windows being plastic and the side mirrors being made of rubber, but they need to make the spoilers with metal, don't know if that's possible but it could fix the damn issue of the fragile plastic, or at least use a more dense material.
Yeah I totally agree with metal spoilers. I know that Minichamps does it on their 1/64 models and there might be some other brands that do it too. So it can definitely be done, but I wouldn't expect it from Mini GT unfortunately
First time viewer. I haven't had any issues with MiniGT myself, but 2 other YTrs I follow have had QC issues. One had same yellow Porsche with completely detached rear wing and front of car looked lifted, while the rear looked lowered. The other is experiencing paint scuffs on the roofs of cars. I think the problem is that they're getting too popular and are having issues with keeping up with demand. I'm rooting for them, I don't want them to fail. TY for sharing
Appreciate you tuning in! Really glad youve escaped issues with your models. In my opinion, the extra money they make from selling more and more models should go back into the company to better the product
Hope they will fix this, but from my honest opinion still prefer them over hw rlc or premium. I mean not saying to get heat, but compare any r35 hw to a minigt or a porsche or even a mustang (there are also more, but these came in mind), its like switching from an old 80s tv to a 4k tv. Looking forward to the next releases.
And about BBR the only one I got is the white mc20 and it was terrible 😞 the chrome outline on the wheels is scattered, the mesh on the side intake is bent, the braking lights are broken and the wheels are spinning as if they were not on the same plane. Returned this for refund
Wow sorry to hear that about your MC20, that's absolutely horrid. Luckily all my BBRs have been good except for the misalignments on my 296. Mini GT needs to do a better job producing them since they are more expensive than your standard Mini GT
Generally my Mini GTs have been okay apart from one or two problems. I think they are trying to do too much for the price point. Would we as collectors mind paying a little more to get decent quality control ?
It may be possible to fix some of these issues. The scuffing on the rear window could be fixed by using some Tamiya polishing compound. For the decals that didn't lay down flat - maybe a liberal application of decal softening liquid might help. That said, we shouldn't have to be doing such things. Yes, I've experienced some QC issues with Mini GT myself. Headlights not being fully flush on the McLaren F1s is one that I got repeatedly. You are absolutely right to comment on Mini GT QC. We certainly don't want them to go down the M2 Machines route. While Mini GT is currently no where near that disaster, it doesn't take much to erode customer confidence in a brand.
Yeah that's my whole point is we shouldn't have to worry about fixing problems on a model we just opened, even though it's totally possible. I'm also a purist and I don't like to alter my models at all lol
I have at this point completely stopped buying MiniGT as most of them have developed paint bubbles....sad considering how beautiful and detailed they are otherwise. I prefer Tarmac Works, Almost Real, LCD and Minichamps in 1:64 scale. Also, I love the brand, and once they crank up on the quality i would start buying them again. I wish MiniGT good luck with their future models, and would like them to really up their game in all of them.
@@euginrobinson I don't blame you for not buying them, but at the same time it would be so hard for me to pass up their models just because I tend to get unlucky lol
I think most people understand where you are going with this quietly. The few models I have purchased from MiniGT so far are early models so I have not seen the QC issues you mentioned. But, from reviews across the diecast community, I do see the oddball complaints made which collectively confirm your gripes. I truly do wish these issues are resolved effectively.
I've only just started collecting and have mostly hit up the back catalogue so far. Thankfully not many QC issues and no major ones. I have a Bentley Continental GT that doesn't roll due to a bent axle, the same decals issue on a Nissan GT-R racer like you and everyone else, and a 911 Targa with front wheels rims that thin out around the edge on one side. I think I had one with a cloudy headlight/glue residue as well. Thankfully my BBR Ferrari 296 was pretty close to faultless. I have started ordering some of the newer stuff now though so hopefully I don't start seeing issues. Your videos have made me a touch paranoid about it though, and sadly QC is the first thing I check on the model now rather than enjoying the opening and taking in the details.
Really glad you haven't had too many QC issues with them. It really sucks that we even have to worry about issues when we open our models, and that's the main reason for this video. Hoping that the right people see it and know that we are not satisfied with their product
While I don’t buy nearly as many models as you, I have seen quality issues with Mini GT regarding one or two models I own, as well as cars in the pack itself with spoilers fallen off, etc. I still really like their lineups, but this is something they can change if they really want it.
Great video. Yeah I can see your point and I agree. I’m not a fan of the wheels not rolling independently of each other. It’s great that you can unscrew the base and change them out. I’ve done that on most of them. I think Pop Race is made by them too. The first Porsche I got from them was missing the drivers side turning signal on the front of the car. So I don’t take pictures of that side. Then the holiday Porsche. The lights on the front bar are warped. Thanks for sharing, I just subscribed, and have a good day brother.
I appreciate your support greatly! Pop Race is not affiliated with Mini GT, they are a different company. I only have one Pop Race so far (aside from some collab models between them and Mini GT). I'm planning on getting more in the future as they are making some really nice things including lamborghini
@@Booster_Diecast right on brother. The PR Porsche I have is really nice. It just sucks it’s missing the turning light. I guess they didn’t glue it on foot enough before it was packaged. I just got PR VW Golf and it’s turned into one of my favorite cars. Yeah it’s a bummer though when you’re paying top dollar for a mini gt or any other higher end diecast and it has some kind of blemish or scuff. Hope it gets better.
I bought a M3 GT3, is my first Mini GT. When I was opening the box, the DRL falled out of the car imediatelly, before even I take the car out of the plastic cover.... This thing made me extremelly upset.
Always hv to consider the people who handle your parcel or shipping. There're always risk with any brand that are more fragile and detailed than Hot Wheels.
Considering I can’t think of anything funny to say (you were too professional with it 😂), I will agree with you on the fact that they just need to slow down. As cool as it is seeing the shiny new preorder having 6 per seems to be too much for them. That or they need to lower the frequency of the drops. I get they want to strike while the iron’s hot but lowering the quality will cool off the momentum way faster than other consumer circumstances
@@Booster_Diecast facts I do think Jaguar cx75 looked cool from the movie car individuals but the set of 4 looked kinda dumb and identical (not like I can buy the sets anyway 💀) Not even gonna start on the events and the exclusive stuff thats a rant in and of itself
Man, I have OCD and my first ever MiniGT is triggering me ALOT, I got the Bamboo Airways Lamborghini Huracán GT3 EVO and oh boy, the amount of paint issues it had straight from the package is triggering me so much, they even forgot to paint the left taillight! Sad since it looked really nice, it would've been okay if I didn't have OCD, but yeah.. thankfully the ones that doesn't have tampos are okay (plain designs), no issues at all hopefully.
Thanks for sharing and be honest and transparent. As a collector of MINI GT models, I had no idea about this quality issues. I am waiting for my Bugatti EB110. About the other models in the video I don´t hane any of them. But really really bad the issues with the liverys, scractches and glue residues.... I will be aware wihr my new purchases.
Yeah the panel gap on all of the R34s has been a big issue. But I think thats more of a design flaw than a QC issue since all of those castings suffer from it
I had a Black R34 GTR of which the side mirror broke off and also my Kaido House R34 ones mirror is also not in that much of a good shape but it's still sturdy I'll say. Worst of the Black R34 one I didn't even notice it had broke off and couldn't find the side mirror again leaving it in a odd looking way. Also there are some panel gaps in the r34 Idk why. Though I saw a better quality in my Top Secret GTR and the Valkyrie
Sorry you had issues with the mirrors. I don't get broken mirrors often but it has definitely happened in the past. And the panel gaps are notorious on the R34 castings
Ive been pretty lucky so far with my cars. I've had a few i can remember like the blue and silver Maybach with scuffed trunk from the packaging, Shelby Dragonsnake with broken spoiler, LBWK BMW M4 missing drivers side mirror and Bugatti Divo with crooked grille. Also a 50th silver Porsche targa with wonky wheel. Luckily most except missing mirror.I was able to fix. But still shouldn't have to fix things after just opening a new car. Hopefully MINI GT will do a better job on QC, but I know they want to get products out the door quickly and go on to the next thing. But if quality goes downhill people will stop buying their cars and go on to something better. One problem that i can't fix that ive had with them and other diecast manufacturers is wonky wheels. Has anyone else been able to fix this problem? A needed rant video. Can't wait for your next review.
I've also had problems with wonky wheels and tires but usually they're pretty easy to fix. I think Mini GT needs to slow down and put more money into QC rather than hosting all these events and collabs
for the nismo super gt500 cars, yea its unfortunate to have those decal problems, however if you're interested, you could buy a decal softener solution so that the decal can 'stretch' and set on the surface more evenly. but yea still kinda unfortunate to have those problems anyway
@naradhipatiandaru5078 yeah I've had a couple people mention that. I just dont really like messing with my models unless I absolutely have to. Like if a mirror or wing falls off, I will glue it back on
I am a newcomer to this hobby and oh boy I have the same issues with you but with Inno64. I am a big fan of their f40 lbwk and I bought several different models of it all from different sellers. Pretty much all of them come with some sort of QC issue from loose windows, logos, side mirror, to paint chips and bubbling right out of the box. The worst one I had was where they literally forgot to put the engine in the car. (Imagine that LOL!) I also have the purple lbwk s15 from minigt and it came with a random yellow paint streak at the rear fender of the car. The only perfect model that I have is a TLVN Nismo 400R. I've been in and out of many different hobbies and rabbit holes and pretty much none of them are like this. But this one, man, factoring in your experiences with mine, these manufacturers need to get a grip.
@lagsense2945 yeah I've seen Inno has had some issues with the F40 as well. A friend of mine got one that was missing a headlight lol. But yeah I'm sure it's frustrating as a newcomer to have to deal with these issues, and its not exclusive to Mini GT at all. Every brand has issues and you kinda just have to accept that. But mini gt has started to get pretty bad over the past 6 months
I'm a MiniGT collector among many many other brands, and after seeing this video I'm pretty scared! I have a bunch and they've all been such great looking models... my FIRST MINIGT; which is the white M3 E30, had a messed up taillight and I broke it in half trying to fix it, also some of mine have off-centre badges which for me is somewhat ignorable but disappointing nonetheless... also my Kona N has a SLIGHTLY messed up wing but other than that it's perfect and I was SHOOK when I saw how yours came out I'm so sorry TwT otherwise I've gotten pretty lucky with MiniGT it looks like As for M2 Machines I have like 2 of them and I'm not really super into them, and I'll be honest I'm a Greenlight glazer, but I will say they both have bad quality control, Greenlight is notorious for it and I agree, I've seen some pretty horrible stuff from M2 at walmart myself and have taken a couple pics of M2 and GL alike, I'd love to show you them if you wanna see, missing wheels, misaligned doors, and bodies completely off their base, just terrible >.< thankfully GL seems to be improving as their new leader promised better QC anyways thank you for making this video, I know you said that some MiniGT collectors would get fired up and I'm a MiniGT collector myself and I thoroughly enjoyed your video, thank you SOOO MUCH for bringing these issues to light, the funny thing is, those collectors are the ones who should BENEFIT from this video as you're telling MiniGT to make better models lol... here I go again yap mode XD anyways 2; new subscribaaaa
Hey I appreciate you tuning in! I've never really liked GL either due to bad quality but one of their big advantages is they have a HUGE variety of models. Feel free to message me on IG if you wanna chat. I have my handle on my YT page
Eh, I don't really consider MiniGT premium. They're kinda in the Greenlight price range and occupy entry level space. Premium is LCD or GCD (when they actually try)
@@seismic6435 I definitely would not consider these in the GL price range as they're twice the price. I would consider these the entry level for premium, but still premium nonetheless in my eyes
Hi Booster! I've been subscribed to your channel for several months now, and I just wanted to give you props for speaking your mind and sharing your experiences, however unfortunate. Because of your videos and a few other die-cast channels, I was inspired to start a collection of my own. So far, I have 4 Mini GT models, 1 PosterCars model, 1 Hot Wheels model and 1 OPO model. On the topic of Mini GT, I have a Giallo Orion Lamborghini Aventador SVJ [no. 563]. It looks phenomenal but has a misaligned rear right wheel, so it clickety-clacks when rolling forward and can't roll backwards so well. It doesn't look too bad visually and I don't typically roll my Mini GTs like I would do with Hot Wheels, but the inability to roll does still bug me a lot. I'm contemplating taking the car apart to fix it, but I don't want to risk causing further damage. I also have a Bugatti Chiron Super Sport 300+ [no. 409] and it came with a loose rear fin [the piece that goes from the back of the roof to just above the active aero, which I painstakingly glued back together. It looks perfect now. I was considering placing the upcoming 3 models on pre-order: - Lamborghini Huracán Sterrato Bianco Asopo [no. 763] - Lamborghini Revuelto Blu Eleos [no. 748] - Lamborghini Aventador SVJ 63 Blu Aegir [no. 784] Though after seeing this gradual yet quick decline in QC over the last few months, I'm now in two minds. What would you recommend? I really would like to have those cars but I would also like a second opinion before I crack open that wallet, you know? Keep up the awesome work by the way! :) - ShinnyShin
Hey I appreciate you sharing your thoughts and im glad youve decided to start a collection, it truly is a great hobby despite these discussions from time to time. If you're looking at getting those Lambo models, I would still 100% get them. I hardly ever have QC issues with Mini GT Lamborghini. I know that doesn't mean anything as I only get one of each, but if you do get a bad sample, you can always try returning them to the retailer you bought them from
@@Booster_Diecast Hey Booster! Thanks so much for your input, I appreciate it man. And yes, it's becoming a passion that grows with each passing day. I don't know if my collection will ever be as huge as yours, but it's modest! These discussions are indeed valuable because you never know with the Internet sometimes, there could be someone who's linked to Mini GT watching this and taking note. Anything's possible, and I would like to believe that this and other QC videos on RUclips could be their wake-up call. I've seen quite a few videos where for example, there's a somewhat common problem with the quad exhaust pipes on the Bugatti Vision Gran Turismo - they seem to roll off production with 2 pointing up and 2 pointing down. Luckily when I got mine, it didn't have these issues. As for Lamborghini, this was only my 2nd model after the Oro Elios Lamborghini Aventador SVJ [no. 363] and that one has zero faults whatsoever. And the supplier is normally very good - I've ordered 5 total cars from them and aside from the 300+ with the slightly loose fin, this has been the only defective casting. So taking your advice onboard, I'mma hit pre-order on those Lambos I told you about earlier. They will be from a different supplier however, because my usual doesn't have them as an option yet. It's payday this week so I'll treat myself! You should really check them out if you haven't already, and I look forward to seeing your take on those beauties when they get released sometime in Q3 of this year. And much like you, I really hope their QC is up to scratch by that time. Losing Mini GT as an option would be tragic! 😬😬
I've had 3 models out of around 300 that have had issues, worst one is the black liberty walk lamborghini aventador. But that one is known to have issues. Worst after that was the yellow bird with wobbly wheels and an R34 with a missing taillight.
I have about 50 mini gts and haven't noticed many issues but then again I like to buy plain cars with few logos. I hope they don't go the route of Hot Wheels premium and digitize their logos. You ever put Hot Wheels premium under the microscope? The logos are blotchy. But that's why they're only $6. If I had to guess, the company is trying to save $$$. They've dished out a lot of cash to get the rights for these vehicles, they're pumping out a lot more models, so cutbacks needed to be made somewhere and it appears their QC department has shrunk.
Look at the Matchbox stuff with that dot printer, seriously trying to sell stuff for 25 bucks, look at the Mclaren SLR and 720S, mainlines look better than that
Tarmac Works also have a lot of similar issues. Yeah they use a lot more small parts but for the money you spend, it is really frustrating. I really can't count how many times I bent those little antennas and even pushed one in through the roof. I even had to glue the headlight cover back on my Members Only Advan F40. Add to that the little paint, decal, and wheel issues on them too. But of course when they can do everything right, I just love Tarmac Works. But honestly, I hadn't had too many stuff go wrong with Mini GT, knock on wood. Pretty much everything I got from them came in great shape. And I don't even have a whole lot of Mini GT, so that would kinda explain my luck, but I definitely feel you on the quality control thing. They're trying to keep up with demand, but still they could really step things up, especially for the money you're spending on them. Thanks for speaking out.
Yeah tarmac works is a whole different beast when it comes to QC lol. I only buy their hobby64 stuff because their global64 line is horrible when it comes to price/quality. But I've also had some bad QC with them and now they're trying to push their cards on us🙄 I could make a whole video about Tarmac as well
@@Booster_Diecast Yeah I don't blame ya for only sticking with Hobby64. At least that line do have Ferraris.🐎 I tried not to knock those little trading cards either at first but they do sound kinda corny lmao.
Tarmac is very shady, had one model by them and wasn't impressed by it. Their J collection is horrible and just reusing old models from DeAgostini. And now pushing those cards lol. Wheels on their Hobby64 dont roll as well like lmao
@qwerty975 yeah I pretty much only collect the ferraris when it comes to tarmac works. I have a couple porsche GT3s as well but they have so many issues
I agree, i actually have the same Cadillac Hypercar and it has the WORST defect ever…. The canopy is slightly loose for some reason:’) How do i stop that from bothering me? 😭
@seanrosete5360 Yeah I've heard people have been having this issue. I have had that problem yet but I honeslty don't know if there's any fix for it. Only thing I could recommend is to see if the seller will send you a replacement
I had a verstappen F1 car mini gt that had a massively crooked rear wing that was so bad i ended up having to take the whole thing apart to fix it with glue, etc... disappointing for sure
I love the castings from Mini Gt, they bring out great iconic liveries on the r32, silvia, mclaren f1 and subaru. However, Im so disappointed with their QC. My Mclaren F1 gtr has a huge dent/line on the side ruining the names of the drivers. It looked like someone took a knife and carved it. R32 is chipped and another came with a spoiler only attached on one side and one taillight popping out. Subaru imprezza’s base rattles around and wheels are super wonky Acura arx came chipped and a bent skirt at the front Honda s2000 also another scratch and has a loose/weak windscreen. The only one without a single issue is a hyundai and that is my least fav car, just a surprise gift. How sad They arent that cheap in my region, hitting 20usd on average and i have to say theres been way more QC issues than my tomicas and hotwheels… most frustrating is that you cant check for damages because its in a sealed box so no shop will let you return it and refund you.
@Kei.W Wow I'm so sorry to hear that you had so many issues with your models. That's the pont in videos like these. Even if Mini GT refuses to improve, it at least spreads a bit of awareness for all these problems
Recently i bought a Aventador scj and that wing was not sticked to the car and I also got a pagani with messed up paint and these are my very first mini gt 🗿
I only have a few Mini GT's but Im pretty lucky mine has no issues..... But Im aware that they have quality issues since last year but to be fair also other brands like Hotwheels has QC issues as well and it's sad 😰
Yeah every brand will have QC issues unfortunately, it's just the way it goes. But mini gt is starting to scare me a bit. I hope that you continue to have good models with no issues!
Well said Mate! Mini GT has producing a lot of type of cars no one was making. Other than the repetitive gtr, mustang. But they have released new cars like the le man, 24 hrs daytona , mercedes s class, mercedes eqs. One of the bugatti chiron in black from Mini GT suffered a QC issue. one of the piece near that is mounted on the roof extends till the back break off due to small amount of force. At that point, I'm dissapointed! I knew Mini GT are fragile models but their products are made out of diecast and the price of their products aren't exactly the cheapest. They are producing a lot of models and innovation in 1/64 world. But as Mini GT is growing bigger and famous. Their quality seems to be dropping and they start to neglect their customer. Their chinese competitors Pop race and Xcartoys are way better than Mini GT in terms of quality, interior details and feel of the car. Currently I don't collect diecast anymore due to the fact from years of experience in collecting. The problems with the model itself is predictable, qc issues are inevitable. So there is no excitement in collecting this super detailed and realistic models even though I love cars.
Yeah I think a lot of these problems stem from the increased demand and production of the models. Mini GT needs to slow down and take better car of their quality. Mini GT is my favorite brand because they have brought us so many amazing and diverse models. They are still pretty cheap for the amount of detail and accuracy you get, but their quality is declining very fast! It's scary
Yeah man I've noticed all the QC failures with mini GT as well. saddly I've been noticing it with PopRace this year in particular. Ohh and yeah the very first BBR Maserati I got was missing a headlight 😢 feels like the more popular a company gets the more they don't care
Unfortunately you are right, and Mini GT has been pumping out way too many models. Seems like they can't handle the production. I've seen some really bad stuff with Pop Race and BBR as well. It's really sad
I wouldn't say brands to that deliberately because they simply don't care. But rather, they're strugling to keep up with the pace. In similar way you see bottlenecks on global logistic networks few years ago. Higher popularity could mean higher demand, which mean higher production number. With that, comes the higher risk on QC problem
Just buy the car that you like. But if you really want only one, buy Porsche 911 GT3 RS. It has almost as much details as other more expensive brands. The car itself is also the one that everybody wants so they probably put more effort into it and I haven't seen any quality issues so far. Though for that same reason it might be a little more expensive than the average Mini GT on the current market.
Not just blowing smoke up your ass, but i totally agree with what you've said. For me also, the issue is churning out to many & also the collectors like us buy more, so probably hit the bad stuff more. Love the Poprace coming out, just done a review on 2 Porsche targas. Next week or so should publish. Finally getting fast broadband tomorrow here so should upload quicker. Keep up the great work Toby👍🏆
Appreciate you Alfie! And congrats on the better internet, that should help out a lot. I really like poprace too but I'm very selective about what I buy from them. But once they start rolling out the Lambos I'll be all over it lol
i dont blame you for being up set with the quality of mini GT - in my country atleast they kinda over priced in South Africa and not as good quality from the videos and collection - some of them have tires with gaps, miss paint and print, scuffed plastic
I am getting the #24 bmw m hybrid probably tomorrow. I hope this one will be good in quality control Since this is my favorite prototype or even my favorite race car🤞
@@Booster_Diecast Update: Didn't get a good luck on this one😂one of the endplates of the rear wing was not glued to the body at all; the rear wing was not even; the shark fin was not perfectly upright; plus multiple paint defects, including a white dashed line on the front wheel arch covered by carbon……I was looking forward to this a lot and now I am thinking about returning this one and purchasing another from another retailer who agreed to unbox before shipping to me and check if there’s any major defect
If I really want a model then I buy 2 at once and then I make 1 out of them 😂 so far this strategy worked except with orange Mustang - both were faulty and I just gave up on that colour. Now I’m moving slowly to Inno64 - costs more and has better QC.
And you definitely should not have to buy 2 of a particular model in hopes to have one mint one or combine them to make a mint one. That is sooo much extra money. Inno64 is great when it comes to quality but they don't have anywhere near Mini GTs diversity in car selection unfortunately
My first Kaido House was the R34 and arrived with a half inch paint rash to its door and the other side mirror is not as stable as the other side and has a tendency to break if not handled carefully. This is kinda disappointing as I was expecting better quality from MiniGT.
@wilgatdula6795 I don't collect Kaido House anymore just because I'm not really the biggest JDM fan and don't care for the unrealistic body kits that much, but they do have some QC issues as well. I've seen a lot of people have problems with them unfortunately
MGT is clearly prioritizing quantity over quality, and it's gonna bite them BAD... i've seen lots of cars with issues, and none were the ones you showed... one of their newest M4 GT3's is having issues with missing decals on a LOT of them... i've even seen the Gold R32 from TAS with full on Missing headlights... its a event model, super limited...if they didn't even bothered to double check those, imagine the normal release ones
Yeah luckily my gold TAS R32 didn't have that headlight issue (I would have been furious) but I have seen some photos of the missing headlights on those. It's really irritating when we spend our hard earned collection money on messed up models
I have all kinds of brands and none of them are 100% perfect, there're always something wrong when you start to inspect them closely including the interiors. Mini GT with its ever widening range of cars i think still doing pretty good. But they definitely can improve the QC inspections. The BBR Ferrari was rushed to release on an event could have waited for a later batch release
Yeah there will always be issues no doubt, but I think they could definitely work on bettering their brand instead of dumping money into all these events and whatnot
Hey man, I've just started collecting myself and bought the new yellow NSX mini GT x Kaido house and very disappointedly there was a massive fluff on the headlight I can't remove unless i'm willing to damage the paint. I would try inno64 but wheels don't roll. ignition model is too expensive and wheels also don't roll. I don't particularly like tarmac works design, prefer JDM street racing cars from 90s to early 2000s. Little stuck with mini GT so I'm really hoping their QC get better. Do you know any other licensed 1/64 makers I could look into?
@arjaysangalang9154 If the rolling thing is something you can get passed, Inno64 is the absolute best brand to collect. Other than that, you have pretty limited options. Tarmac does do some 90s-2000s JDM in both their Global64 and Hobby64 lines. Other than that it's pretty much Mini GT and Kaido House. (Edit: Check out Pop Race as well). Hopefully their QC will start to straighten out, but you can always return your faulty models to your seller and ask for a replacement. Or your money back if they don't have extras. Then you can get another from a different seller. Doing this is the only effective way we can get our voice out, as sellers don't want to lose money and the complaints will eventually run their way up the food chain. Appreciate you watching, and welcome to the hobby! Feel free to message me on IG if you want to chat
@@Booster_Diecast Hey man, thanks for the advice. I forgot I could exchange lol I'll know for future. I've looked into some Tarmac models, so far just not many I'm interested in. I'll consider inno64 but i don't think ill get pass no rolling wheels yet. I've looked into tomica limited vintage neo so far, they look insane so I'm waiting for a couple to arrive, pricey but feels like all the things im looking for. Do you have any thoughts on POP race? I might be wrong but looks like they started licensing now?
@arjaysangalang9154 Tomica limited vintage is amazing. I don't have any of them in my collection but the detail of those models is top notch. As far as I know Pop Race has always been licensed, except for the odd aftermarket stuff like the Singer Porsches and whatnot. I would say Pop Race is on par with Mini GT in terms of detail, but QC can be hit or miss
@@Booster_Diecast Yeah just received tomica limited vintage and it is insanely detailed! Rolling wheels with visible brake calipers and working suspension! I think i'll stick to TLVN for now with the occassional kaido house or inno64 to compare. POP race kinda makes me uneasy, their boxes don't always have the manufacturer licensed logo lol. I'm nitpicking now so I dont end up over collecting haha
@arjaysangalang9154 that's fair enough! Most of pop race stuff is licensed but some of the custom stuff is not, like RWB and Stinger porsches. I have yet to add any Tomica TLV to my collection but they are unarguably some of the most detailed 1/64s
Dang bro the comments are buzzing on this one. Feels like a bunch of eulogies 😂😭. Mine as well jump in. My very first one was the yellow c8 z06 that came with a damaged blister, mirror that was almost falling off, and paint bubbles on the side. Idk if that happened in transit but not a great first look (I lost it tho so idrc at this point). 20 models later I think I’ve been almost perfect, so if anyone reading this is on the fence I’d still say go for it, they’re great models.
Devo te contar administrador que todos esses Mini GT tem que ter uns cuidados, por exemplo não deixar a unha encostar na tinta e ter controle na temperatura da sua mão ao segurar na tinta pois isso causa umas bolhas
@@Booster_Diecast If you think current Mini GT quality is scary, I dunno what would you say about their past. When i started collecting Mini GT about 4 years ago, QC problem also exist. Sometimes as worse as missing screw, missing light part and messy glue all in one example. Some of their early model also has higher stance, worst paint finnish and even melting wheels. Considering some of those issues aren't as worse, I would say they are on the right path
Thats why i dont buy lots of minit gt. my last minigt was the black gtr r35. kaido house has good production but i stop getting it as its only colour changes and milking all the r33, r34s so its repetitive. I went to get detailed versions like miniDREAM, carlounge(resin), u2, cm model is great too, lcd model is fine, microturbo etc
A point i forgot to mention in the video so ill pin it here in the comments:
I think it would be beneficial if Mini GT took the money that they are spending on exclusive models and events and put it towards improving their products. Events are a great way to connect with fans, but that seems to be their main focus lately. And the event models as a whole is a discussion for another video
Were on the same page again, great idea which they would do well to adopt👍
100%
Well I got my first MiniGT and it had one QC issue - the back wheel wouldn't roll. Seeing as screws were used to hold the model together, I took it apart to look for the problem. It was the wheel arch, it hadn't molded right and there was a line of crap metal along the edge stopping the wheel from rolling. Fortunately I build model kits as another hobby and I have a set of diamond files. After some filing, I managed to remove the crap and the wheel was able to roll.
Glad you were able to get that model fixed! It's really a bummer that your first Mini GT left a bad taste in your mouth
These issues are common growing pains for many companies. Glad they are acknowledging problems, but action speaks louder than words.
Absolutely
The CEO said publicly that last year he threw half a million dollars worth of miniatures into the trash because of quality control. In addition to working under pressure, they are unable to deliver certain models with specific dates on time. I hope they can overcome this problem and don't forget that you can ask for a refund on these faulty models.
Yeah throwing that many models in the bin right off the assembly line is a huge problem as well, but it seems that they're being more lenient and letting more and more bad models slip into the market. And it also feels bad to return bad models since it's also not the sellers fault
I watched one interview with the CEO and we're screwed. The CEO said if you want a higher detailed model car, there will be a bigger margin of error. He then said everyone has QC issues including Ferrari. Well let me say this - if I dropped a ton of money on a brand new Ferrari, it had better be 100% perfect. If there is a single scratch on the leather seat, it's going back to the dealer.
hot wheels are way better
@@angel-ij4xv I firmly disagree
@@minthouse6338 I'm not sure if you aware of this, but that mindset is too naive. Not even real Ferrari has the best quality control. Yet you expect way more on relatively mass-produced scale model that cost few dozen dollars.
Few years ago, Ferrari themselves has problems with thousands of 458 & 488 because of brake issue. About a decade ago, they already noted 458 because some of them burst into flames
Good point, MiniGT seems to push their production and gain more customer through event or anything like that, and yet they're fall behind from quality control.
I've seen so many people complain about Mini GT issues, and that's makes me quite hesitate to buy my very first Mini GT. These item aren't cheap, and yet customer got sub quality product
That was a good video, mate! I've been following Mini GT since the very beginning, but only this year I started collecting; I've only got 3 cars so far (a 4th one is on the way) so I can't say I have a large sample quantity, but I do have a few points to make. Firstly, I should say I'm rather lucky that my cars are 98% issue free, so much that I'm genuinely impressed. However, my MAJOR gripe is the wheels : on 2 of my 3 cars, they're wobbly, one of them being much worse than the other. It doesn't detract from the model when stationary but when rolling, it's really irritating. The other issue is the axle length; sometimes it's so extra wide (almost 1mm), more than it should be, that it makes the car slide side-to-side, and that is equally frustrating. Also, on my Alpina, the rear exhaust piece had not been glued properly and was loose, which I had to glue back on myself. Other than that though, I don't think I have many complaints, I am enjoying buying Mini GTs (they remind me of Matchbox for some reason) and I just hope they don't sacrifice quality in favour of churning out more models.
I've been thinking the same. It's sad to see them slowly lose quality they once had. Hope they fix it, especially cause you can't even see the car you're buying, very unfair on the buyer.
I think this is a good point. Unless you have a hobby shop near you (which I don't and many others likely dont) then you can't see the model until you have it in person
@Booster_Diecast I just wish they changed their packaging style, it shouldn't be a gamble on the buyer to see what they got.
I have a Mini GT Lamborghini Aventador GT EVO LB works and there's paint issue and some scrap lodged under front wind shield.
Very unfortunate, sorry to hear that
This is similar to my TLV collection having an insane paintrash percentage. I'm glad to see another channel complain like I do calling out all the BS garbage we see in 1/64. Keep it up since I've already started phasing out 1/64 from my collecting.
Appreciate your comment man, you were actually the one who inspired me to create my channel a little over a year ago 🍻
@@Booster_Diecast Cool; I'll try to boost your channel this weekend.
Yeah, you pay good money for these things you want them to be as close to perfect as possible!
Exactly!
💯💯💯
When hot wheels have issues (specifically the mainlines) it is what it is after all they are only $1 however considering MINI GTs typically start at $10+ you’d expect the quality to be there
@@OnasaD exactly
To be fair, Mini GT has more detail as well. And they aren't exactly the most expensive 1/64 brands either
The biggest issue I have with MiniGT and Kaido House are the wobbly wheels. Drives me crazy. One of my R34 Kaido chases rolls like it's sitting on eggs.
@zegrmn5337 yeah that's a problem too, sometimes the wheels can be really wonky
Mini GT has been quite popular lately in Indonesia. Not because of the new good casting or other good things. But there was one customer who experienced something surprising from the Mini GT service team. He bought a Mini GT R34 Top Secret factory seal, but after opening it was very surprising that one right stop lamp was missing, not loose. After he reported it through customer service, the application was rejected because the product was purchased through a distributor, then when reported to the distributor, they rejected it on the grounds that it had been opened. This moment makes me afraid to buy the latest Mini GT...
i got the Ford Gt le mans from mini gt, the car is great on its own, but yeah some quality issues can be noticed, for example the front wheels not rolling sometimes, and the worst that happened not so long ago, the spoiler broke down after doing the slightest movement with the car, it didn't even fall to the ground or hit anything hard, i tried using glue to fix it but it didn't work, so I'll probably just make some sort of custom with it without the rear spoiler, or maybe make one on my own but made of aluminum in order to give the car its original look with the rear spoiler, i am fine with the windows being plastic and the side mirrors being made of rubber, but they need to make the spoilers with metal, don't know if that's possible but it could fix the damn issue of the fragile plastic, or at least use a more dense material.
Yeah I totally agree with metal spoilers. I know that Minichamps does it on their 1/64 models and there might be some other brands that do it too. So it can definitely be done, but I wouldn't expect it from Mini GT unfortunately
First time viewer. I haven't had any issues with MiniGT myself, but 2 other YTrs I follow have had QC issues. One had same yellow Porsche with completely detached rear wing and front of car looked lifted, while the rear looked lowered. The other is experiencing paint scuffs on the roofs of cars. I think the problem is that they're getting too popular and are having issues with keeping up with demand. I'm rooting for them, I don't want them to fail. TY for sharing
Appreciate you tuning in! Really glad youve escaped issues with your models. In my opinion, the extra money they make from selling more and more models should go back into the company to better the product
Hope they will fix this, but from my honest opinion still prefer them over hw rlc or premium.
I mean not saying to get heat, but compare any r35 hw to a minigt or a porsche or even a mustang (there are also more, but these came in mind), its like switching from an old 80s tv to a 4k tv.
Looking forward to the next releases.
I absolutely agree. I don't have a single HW in my collection and don't think I ever would again. Collectible toys versus model Cars, no comparison
@@Booster_Diecast Exactly, I still have a soft spot for the 60-70s muscle cars from HW the old models until 2015 😆. But thats it.
And about BBR the only one I got is the white mc20 and it was terrible 😞 the chrome outline on the wheels is scattered, the mesh on the side intake is bent, the braking lights are broken and the wheels are spinning as if they were not on the same plane. Returned this for refund
Wow sorry to hear that about your MC20, that's absolutely horrid. Luckily all my BBRs have been good except for the misalignments on my 296. Mini GT needs to do a better job producing them since they are more expensive than your standard Mini GT
Generally my Mini GTs have been okay apart from one or two problems. I think they are trying to do too much for the price point. Would we as collectors mind paying a little more to get decent quality control ?
I would certainly pay a little e tra per model to have the piece of mind, and I think many others would as well
It may be possible to fix some of these issues. The scuffing on the rear window could be fixed by using some Tamiya polishing compound. For the decals that didn't lay down flat - maybe a liberal application of decal softening liquid might help.
That said, we shouldn't have to be doing such things. Yes, I've experienced some QC issues with Mini GT myself. Headlights not being fully flush on the McLaren F1s is one that I got repeatedly. You are absolutely right to comment on Mini GT QC. We certainly don't want them to go down the M2 Machines route. While Mini GT is currently no where near that disaster, it doesn't take much to erode customer confidence in a brand.
You wouldn't by chance collect diecast planes? Reason I ask is I saw another Vifam posting on an airplane forum.
Yeah that's my whole point is we shouldn't have to worry about fixing problems on a model we just opened, even though it's totally possible. I'm also a purist and I don't like to alter my models at all lol
@@minthouse6338 Yes, I also collect diecast aircraft. You must've saw my posts at ModelHangar3?
When everyone become greedy and wants more in such limited time and resources, things happen.
@@168-r4b they are pumping out models too fast
I have at this point completely stopped buying MiniGT as most of them have developed paint bubbles....sad considering how beautiful and detailed they are otherwise. I prefer Tarmac Works, Almost Real, LCD and Minichamps in 1:64 scale. Also, I love the brand, and once they crank up on the quality i would start buying them again. I wish MiniGT good luck with their future models, and would like them to really up their game in all of them.
@@euginrobinson I don't blame you for not buying them, but at the same time it would be so hard for me to pass up their models just because I tend to get unlucky lol
@@Booster_Diecast ha ha, can't help
I think most people understand where you are going with this quietly. The few models I have purchased from MiniGT so far are early models so I have not seen the QC issues you mentioned. But, from reviews across the diecast community, I do see the oddball complaints made which collectively confirm your gripes.
I truly do wish these issues are resolved effectively.
Let's hope so
I've only just started collecting and have mostly hit up the back catalogue so far. Thankfully not many QC issues and no major ones. I have a Bentley Continental GT that doesn't roll due to a bent axle, the same decals issue on a Nissan GT-R racer like you and everyone else, and a 911 Targa with front wheels rims that thin out around the edge on one side. I think I had one with a cloudy headlight/glue residue as well. Thankfully my BBR Ferrari 296 was pretty close to faultless. I have started ordering some of the newer stuff now though so hopefully I don't start seeing issues. Your videos have made me a touch paranoid about it though, and sadly QC is the first thing I check on the model now rather than enjoying the opening and taking in the details.
Really glad you haven't had too many QC issues with them. It really sucks that we even have to worry about issues when we open our models, and that's the main reason for this video. Hoping that the right people see it and know that we are not satisfied with their product
i do have some quality problem also....my s15 head light came off....ya i think they push too many cars come out...
Sorry to hear about your s15
While I don’t buy nearly as many models as you, I have seen quality issues with Mini GT regarding one or two models I own, as well as cars in the pack itself with spoilers fallen off, etc. I still really like their lineups, but this is something they can change if they really want it.
Yeah and that's the part that really sucks, their lineup is phenomenonal
Great video. Yeah I can see your point and I agree. I’m not a fan of the wheels not rolling independently of each other. It’s great that you can unscrew the base and change them out. I’ve done that on most of them. I think Pop Race is made by them too. The first Porsche I got from them was missing the drivers side turning signal on the front of the car. So I don’t take pictures of that side. Then the holiday Porsche. The lights on the front bar are warped. Thanks for sharing, I just subscribed, and have a good day brother.
I appreciate your support greatly! Pop Race is not affiliated with Mini GT, they are a different company. I only have one Pop Race so far (aside from some collab models between them and Mini GT). I'm planning on getting more in the future as they are making some really nice things including lamborghini
@@Booster_Diecast right on brother. The PR Porsche I have is really nice. It just sucks it’s missing the turning light. I guess they didn’t glue it on foot enough before it was packaged. I just got PR VW Golf and it’s turned into one of my favorite cars. Yeah it’s a bummer though when you’re paying top dollar for a mini gt or any other higher end diecast and it has some kind of blemish or scuff. Hope it gets better.
Thanks for making this video- I completely agree man this is very important
Appreciate you
I bought a M3 GT3, is my first Mini GT. When I was opening the box, the DRL falled out of the car imediatelly, before even I take the car out of the plastic cover.... This thing made me extremelly upset.
Always hv to consider the people who handle your parcel or shipping. There're always risk with any brand that are more fragile and detailed than Hot Wheels.
Man that's really unfortunate, I'm sorry to hear that
A suitable substitute for Mini GT is Pop Race.
@@tri-edge I've seen issues with pop race as well, but they are definitely a good alternative. Just not as much variety yet
Considering I can’t think of anything funny to say (you were too professional with it 😂), I will agree with you on the fact that they just need to slow down. As cool as it is seeing the shiny new preorder having 6 per seems to be too much for them. That or they need to lower the frequency of the drops. I get they want to strike while the iron’s hot but lowering the quality will cool off the momentum way faster than other consumer circumstances
And the only thing Glen cars about right now are the mid 007 James bond cars, and events.
@@Booster_Diecast facts I do think Jaguar cx75 looked cool from the movie car individuals but the set of 4 looked kinda dumb and identical (not like I can buy the sets anyway 💀) Not even gonna start on the events and the exclusive stuff thats a rant in and of itself
Man, I have OCD and my first ever MiniGT is triggering me ALOT, I got the Bamboo Airways Lamborghini Huracán GT3 EVO and oh boy, the amount of paint issues it had straight from the package is triggering me so much, they even forgot to paint the left taillight! Sad since it looked really nice, it would've been okay if I didn't have OCD, but yeah.. thankfully the ones that doesn't have tampos are okay (plain designs), no issues at all hopefully.
Thanks for sharing and be honest and transparent. As a collector of MINI GT models, I had no idea about this quality issues. I am waiting for my Bugatti EB110. About the other models in the video I don´t hane any of them. But really really bad the issues with the liverys, scractches and glue residues.... I will be aware wihr my new purchases.
@@SiegedByCars I genuinely hope all your future models are flawless!
Recently ordered an r34 black but there was a HUGE panel gap on the windows and one of the side mirrors were flimsy I thought it was gonna snap off
Yeah the panel gap on all of the R34s has been a big issue. But I think thats more of a design flaw than a QC issue since all of those castings suffer from it
I had a Black R34 GTR of which the side mirror broke off and also my Kaido House R34 ones mirror is also not in that much of a good shape but it's still sturdy I'll say. Worst of the Black R34 one I didn't even notice it had broke off and couldn't find the side mirror again leaving it in a odd looking way. Also there are some panel gaps in the r34 Idk why. Though I saw a better quality in my Top Secret GTR and the Valkyrie
Sorry you had issues with the mirrors. I don't get broken mirrors often but it has definitely happened in the past. And the panel gaps are notorious on the R34 castings
Ive been pretty lucky so far with my cars. I've had a few i can remember like the blue and silver Maybach with scuffed trunk from the packaging, Shelby Dragonsnake with broken spoiler, LBWK BMW M4 missing drivers side mirror and Bugatti Divo with crooked grille. Also a 50th silver Porsche targa with wonky wheel. Luckily most except missing mirror.I was able to fix. But still shouldn't have to fix things after just opening a new car. Hopefully MINI GT will do a better job on QC, but I know they want to get products out the door quickly and go on to the next thing. But if quality goes downhill people will stop buying their cars and go on to something better. One problem that i can't fix that ive had with them and other diecast manufacturers is wonky wheels. Has anyone else been able to fix this problem? A needed rant video. Can't wait for your next review.
I've also had problems with wonky wheels and tires but usually they're pretty easy to fix. I think Mini GT needs to slow down and put more money into QC rather than hosting all these events and collabs
for the nismo super gt500 cars, yea its unfortunate to have those decal problems, however if you're interested, you could buy a decal softener solution so that the decal can 'stretch' and set on the surface more evenly. but yea still kinda unfortunate to have those problems anyway
@naradhipatiandaru5078 yeah I've had a couple people mention that. I just dont really like messing with my models unless I absolutely have to. Like if a mirror or wing falls off, I will glue it back on
I am a newcomer to this hobby and oh boy I have the same issues with you but with Inno64. I am a big fan of their f40 lbwk and I bought several different models of it all from different sellers. Pretty much all of them come with some sort of QC issue from loose windows, logos, side mirror, to paint chips and bubbling right out of the box. The worst one I had was where they literally forgot to put the engine in the car. (Imagine that LOL!)
I also have the purple lbwk s15 from minigt and it came with a random yellow paint streak at the rear fender of the car. The only perfect model that I have is a TLVN Nismo 400R.
I've been in and out of many different hobbies and rabbit holes and pretty much none of them are like this. But this one, man, factoring in your experiences with mine, these manufacturers need to get a grip.
@lagsense2945 yeah I've seen Inno has had some issues with the F40 as well. A friend of mine got one that was missing a headlight lol.
But yeah I'm sure it's frustrating as a newcomer to have to deal with these issues, and its not exclusive to Mini GT at all. Every brand has issues and you kinda just have to accept that. But mini gt has started to get pretty bad over the past 6 months
I'm a MiniGT collector among many many other brands, and after seeing this video I'm pretty scared! I have a bunch and they've all been such great looking models... my FIRST MINIGT; which is the white M3 E30, had a messed up taillight and I broke it in half trying to fix it, also some of mine have off-centre badges which for me is somewhat ignorable but disappointing nonetheless... also my Kona N has a SLIGHTLY messed up wing but other than that it's perfect and I was SHOOK when I saw how yours came out I'm so sorry TwT otherwise I've gotten pretty lucky with MiniGT it looks like
As for M2 Machines I have like 2 of them and I'm not really super into them, and I'll be honest I'm a Greenlight glazer, but I will say they both have bad quality control, Greenlight is notorious for it and I agree, I've seen some pretty horrible stuff from M2 at walmart myself and have taken a couple pics of M2 and GL alike, I'd love to show you them if you wanna see, missing wheels, misaligned doors, and bodies completely off their base, just terrible >.< thankfully GL seems to be improving as their new leader promised better QC
anyways thank you for making this video, I know you said that some MiniGT collectors would get fired up and I'm a MiniGT collector myself and I thoroughly enjoyed your video, thank you SOOO MUCH for bringing these issues to light, the funny thing is, those collectors are the ones who should BENEFIT from this video as you're telling MiniGT to make better models lol... here I go again yap mode XD
anyways 2; new subscribaaaa
Hey I appreciate you tuning in! I've never really liked GL either due to bad quality but one of their big advantages is they have a HUGE variety of models. Feel free to message me on IG if you wanna chat. I have my handle on my YT page
Same thing here, my bugatti chiron supersport white has rough on its rear! I dont know why and i bought it Brand New
@darkisplays7670 yeah super unfortunate. Sorry to hear that
Speak your mind! I have always felt this way about Mini GT
@@ScottRPriester 💯💯
Sometimes the design isn't great, I notice gaps between the plastic windows and diecast door area which shouldn't be there in a premium model
I haven't experienced that on Mini GT (yet), but certainly on Para 64 models.
I've had some issues with that as well, most noticeably the R34 castings
Eh, I don't really consider MiniGT premium. They're kinda in the Greenlight price range and occupy entry level space. Premium is LCD or GCD (when they actually try)
@@seismic6435 I definitely would not consider these in the GL price range as they're twice the price. I would consider these the entry level for premium, but still premium nonetheless in my eyes
@@Booster_Diecast eh, GLs are like 7 - 8 online. MiniGTs are like 11.
Hi Booster!
I've been subscribed to your channel for several months now, and I just wanted to give you props for speaking your mind and sharing your experiences, however unfortunate.
Because of your videos and a few other die-cast channels, I was inspired to start a collection of my own. So far, I have 4 Mini GT models, 1 PosterCars model, 1 Hot Wheels model and 1 OPO model.
On the topic of Mini GT, I have a Giallo Orion Lamborghini Aventador SVJ [no. 563]. It looks phenomenal but has a misaligned rear right wheel, so it clickety-clacks when rolling forward and can't roll backwards so well.
It doesn't look too bad visually and I don't typically roll my Mini GTs like I would do with Hot Wheels, but the inability to roll does still bug me a lot. I'm contemplating taking the car apart to fix it, but I don't want to risk causing further damage.
I also have a Bugatti Chiron Super Sport 300+ [no. 409] and it came with a loose rear fin [the piece that goes from the back of the roof to just above the active aero, which I painstakingly glued back together. It looks perfect now.
I was considering placing the upcoming 3 models on pre-order:
- Lamborghini Huracán Sterrato Bianco Asopo [no. 763]
- Lamborghini Revuelto Blu Eleos [no. 748]
- Lamborghini Aventador SVJ 63 Blu Aegir [no. 784]
Though after seeing this gradual yet quick decline in QC over the last few months, I'm now in two minds.
What would you recommend?
I really would like to have those cars but I would also like a second opinion before I crack open that wallet, you know?
Keep up the awesome work by the way! :)
- ShinnyShin
Hey I appreciate you sharing your thoughts and im glad youve decided to start a collection, it truly is a great hobby despite these discussions from time to time.
If you're looking at getting those Lambo models, I would still 100% get them. I hardly ever have QC issues with Mini GT Lamborghini. I know that doesn't mean anything as I only get one of each, but if you do get a bad sample, you can always try returning them to the retailer you bought them from
@@Booster_Diecast Hey Booster!
Thanks so much for your input, I appreciate it man. And yes, it's becoming a passion that grows with each passing day. I don't know if my collection will ever be as huge as yours, but it's modest!
These discussions are indeed valuable because you never know with the Internet sometimes, there could be someone who's linked to Mini GT watching this and taking note. Anything's possible, and I would like to believe that this and other QC videos on RUclips could be their wake-up call.
I've seen quite a few videos where for example, there's a somewhat common problem with the quad exhaust pipes on the Bugatti Vision Gran Turismo - they seem to roll off production with 2 pointing up and 2 pointing down. Luckily when I got mine, it didn't have these issues.
As for Lamborghini, this was only my 2nd model after the Oro Elios Lamborghini Aventador SVJ [no. 363] and that one has zero faults whatsoever. And the supplier is normally very good - I've ordered 5 total cars from them and aside from the 300+ with the slightly loose fin, this has been the only defective casting.
So taking your advice onboard, I'mma hit pre-order on those Lambos I told you about earlier. They will be from a different supplier however, because my usual doesn't have them as an option yet. It's payday this week so I'll treat myself!
You should really check them out if you haven't already, and I look forward to seeing your take on those beauties when they get released sometime in Q3 of this year.
And much like you, I really hope their QC is up to scratch by that time. Losing Mini GT as an option would be tragic! 😬😬
@ShinnyShin_001 oh yeah ill definitely be getting those lambos when they come out! I have every mini gt lambo haha. That's my main love
I've had 3 models out of around 300 that have had issues, worst one is the black liberty walk lamborghini aventador. But that one is known to have issues. Worst after that was the yellow bird with wobbly wheels and an R34 with a missing taillight.
Very unfortunate. 3/300 is not bad at all though!
I have about 50 mini gts and haven't noticed many issues but then again I like to buy plain cars with few logos. I hope they don't go the route of Hot Wheels premium and digitize their logos. You ever put Hot Wheels premium under the microscope? The logos are blotchy. But that's why they're only $6. If I had to guess, the company is trying to save $$$. They've dished out a lot of cash to get the rights for these vehicles, they're pumping out a lot more models, so cutbacks needed to be made somewhere and it appears their QC department has shrunk.
Yeah if mini gt gets to where hotwheels is, I will no longer collect then lol. I agree with you about them cutting corners lately
Look at the Matchbox stuff with that dot printer, seriously trying to sell stuff for 25 bucks, look at the Mclaren SLR and 720S, mainlines look better than that
Tarmac Works also have a lot of similar issues. Yeah they use a lot more small parts but for the money you spend, it is really frustrating. I really can't count how many times I bent those little antennas and even pushed one in through the roof. I even had to glue the headlight cover back on my Members Only Advan F40. Add to that the little paint, decal, and wheel issues on them too. But of course when they can do everything right, I just love Tarmac Works.
But honestly, I hadn't had too many stuff go wrong with Mini GT, knock on wood. Pretty much everything I got from them came in great shape. And I don't even have a whole lot of Mini GT, so that would kinda explain my luck, but I definitely feel you on the quality control thing. They're trying to keep up with demand, but still they could really step things up, especially for the money you're spending on them. Thanks for speaking out.
Yeah tarmac works is a whole different beast when it comes to QC lol. I only buy their hobby64 stuff because their global64 line is horrible when it comes to price/quality. But I've also had some bad QC with them and now they're trying to push their cards on us🙄 I could make a whole video about Tarmac as well
@@Booster_Diecast Yeah I don't blame ya for only sticking with Hobby64. At least that line do have Ferraris.🐎 I tried not to knock those little trading cards either at first but they do sound kinda corny lmao.
Tarmac is very shady, had one model by them and wasn't impressed by it. Their J collection is horrible and just reusing old models from DeAgostini. And now pushing those cards lol. Wheels on their Hobby64 dont roll as well like lmao
@qwerty975 yeah I pretty much only collect the ferraris when it comes to tarmac works. I have a couple porsche GT3s as well but they have so many issues
I agree, i actually have the same Cadillac Hypercar and it has the WORST defect ever…. The canopy is slightly loose for some reason:’) How do i stop that from bothering me? 😭
AND I BOUGHT THE DAMN THING YESTERDAY
@seanrosete5360 Yeah I've heard people have been having this issue. I have had that problem yet but I honeslty don't know if there's any fix for it. Only thing I could recommend is to see if the seller will send you a replacement
I had a verstappen F1 car mini gt that had a massively crooked rear wing that was so bad i ended up having to take the whole thing apart to fix it with glue, etc... disappointing for sure
@tylergates772 yeah super disappointing
I love the castings from Mini Gt, they bring out great iconic liveries on the r32, silvia, mclaren f1 and subaru. However, Im so disappointed with their QC.
My Mclaren F1 gtr has a huge dent/line on the side ruining the names of the drivers. It looked like someone took a knife and carved it.
R32 is chipped and another came with a spoiler only attached on one side and one taillight popping out.
Subaru imprezza’s base rattles around and wheels are super wonky
Acura arx came chipped and a bent skirt at the front
Honda s2000 also another scratch and has a loose/weak windscreen.
The only one without a single issue is a hyundai and that is my least fav car, just a surprise gift. How sad
They arent that cheap in my region, hitting 20usd on average and i have to say theres been way more QC issues than my tomicas and hotwheels… most frustrating is that you cant check for damages because its in a sealed box so no shop will let you return it and refund you.
@Kei.W Wow I'm so sorry to hear that you had so many issues with your models. That's the pont in videos like these. Even if Mini GT refuses to improve, it at least spreads a bit of awareness for all these problems
Recently i bought a Aventador scj and that wing was not sticked to the car and I also got a pagani with messed up paint and these are my very first mini gt 🗿
I'm sorry to hear your first 2 were busts. I hope you stick with the brand because they do make some incredible models.
I just checked on my very own mini gt super gt r35s and I have the very same issue
@@jeffnghongda yeah every single one of those did. It's so disappointing
I got one on my mgt skyline bayside blue paint is not smooth on right side front bumper😢
Very unfortunate, sorry to hear that
I only have a few Mini GT's but Im pretty lucky mine has no issues..... But Im aware that they have quality issues since last year but to be fair also other brands like Hotwheels has QC issues as well and it's sad 😰
Yeah every brand will have QC issues unfortunately, it's just the way it goes. But mini gt is starting to scare me a bit. I hope that you continue to have good models with no issues!
Well said Mate! Mini GT has producing a lot of type of cars no one was making. Other than the repetitive gtr, mustang. But they have released new cars like the le man, 24 hrs daytona , mercedes s class, mercedes eqs. One of the bugatti chiron in black from Mini GT suffered a QC issue. one of the piece near that is mounted on the roof extends till the back break off due to small amount of force. At that point, I'm dissapointed! I knew Mini GT are fragile models but their products are made out of diecast and the price of their products aren't exactly the cheapest. They are producing a lot of models and innovation in 1/64 world. But as Mini GT is growing bigger and famous. Their quality seems to be dropping and they start to neglect their customer. Their chinese competitors Pop race and Xcartoys are way better than Mini GT in terms of quality, interior details and feel of the car. Currently I don't collect diecast anymore due to the fact from years of experience in collecting. The problems with the model itself is predictable, qc issues are inevitable. So there is no excitement in collecting this super detailed and realistic models even though I love cars.
Yeah I think a lot of these problems stem from the increased demand and production of the models. Mini GT needs to slow down and take better car of their quality. Mini GT is my favorite brand because they have brought us so many amazing and diverse models. They are still pretty cheap for the amount of detail and accuracy you get, but their quality is declining very fast! It's scary
Yeah man I've noticed all the QC failures with mini GT as well. saddly I've been noticing it with PopRace this year in particular. Ohh and yeah the very first BBR Maserati I got was missing a headlight 😢 feels like the more popular a company gets the more they don't care
Unfortunately you are right, and Mini GT has been pumping out way too many models. Seems like they can't handle the production. I've seen some really bad stuff with Pop Race and BBR as well. It's really sad
I wouldn't say brands to that deliberately because they simply don't care. But rather, they're strugling to keep up with the pace. In similar way you see bottlenecks on global logistic networks few years ago.
Higher popularity could mean higher demand, which mean higher production number. With that, comes the higher risk on QC problem
@@ivanbima5877 Youre not wrong thats what were both saying. But QC can be handled with more employees
@@NaztalgicAnd more time as well. Meanwhile, there are tons of collectors out there complaining the current production pace of Mini GT is too slow
If you have to buy Just one MINI GT , only one ... then what model will it be ? .... whatever you suggest , im gonna buy that , love your work man .
@WildHeart111 oh man, that's a super tough one lol. Do you have any mini gts yet?
Just buy the car that you like.
But if you really want only one, buy Porsche 911 GT3 RS. It has almost as much details as other more expensive brands. The car itself is also the one that everybody wants so they probably put more effort into it and I haven't seen any quality issues so far. Though for that same reason it might be a little more expensive than the average Mini GT on the current market.
Not just blowing smoke up your ass, but i totally agree with what you've said. For me also, the issue is churning out to many & also the collectors like us buy more, so probably hit the bad stuff more.
Love the Poprace coming out, just done a review on 2 Porsche targas. Next week or so should publish. Finally getting fast broadband tomorrow here so should upload quicker.
Keep up the great work Toby👍🏆
Appreciate you Alfie! And congrats on the better internet, that should help out a lot. I really like poprace too but I'm very selective about what I buy from them. But once they start rolling out the Lambos I'll be all over it lol
i dont blame you for being up set with the quality of mini GT - in my country atleast they kinda over priced in South Africa and not as good quality from the videos and collection - some of them have tires with gaps, miss paint and print, scuffed plastic
I am getting the #24 bmw m hybrid probably tomorrow. I hope this one will be good in quality control Since this is my favorite prototype or even my favorite race car🤞
I'm hoping the best for you. That's an amazing car so hopefully the decal application is clean
@@Booster_Diecast Update: Didn't get a good luck on this one😂one of the endplates of the rear wing was not glued to the body at all; the rear wing was not even; the shark fin was not perfectly upright; plus multiple paint defects, including a white dashed line on the front wheel arch covered by carbon……I was looking forward to this a lot and now I am thinking about returning this one and purchasing another from another retailer who agreed to unbox before shipping to me and check if there’s any major defect
If I really want a model then I buy 2 at once and then I make 1 out of them 😂 so far this strategy worked except with orange Mustang - both were faulty and I just gave up on that colour. Now I’m moving slowly to Inno64 - costs more and has better QC.
And you definitely should not have to buy 2 of a particular model in hopes to have one mint one or combine them to make a mint one. That is sooo much extra money. Inno64 is great when it comes to quality but they don't have anywhere near Mini GTs diversity in car selection unfortunately
@@Booster_Diecast agreed.
I have two innos and both have flaws
i got a mini gt bentley and the rear wheels cant roll properly . its kinda sucks
Yeah wheels not rolling properly is another big issue
My first Kaido House was the R34 and arrived with a half inch paint rash to its door and the other side mirror is not as stable as the other side and has a tendency to break if not handled carefully. This is kinda disappointing as I was expecting better quality from MiniGT.
@wilgatdula6795 I don't collect Kaido House anymore just because I'm not really the biggest JDM fan and don't care for the unrealistic body kits that much, but they do have some QC issues as well. I've seen a lot of people have problems with them unfortunately
MGT is clearly prioritizing quantity over quality, and it's gonna bite them BAD... i've seen lots of cars with issues, and none were the ones you showed... one of their newest M4 GT3's is having issues with missing decals on a LOT of them... i've even seen the Gold R32 from TAS with full on Missing headlights... its a event model, super limited...if they didn't even bothered to double check those, imagine the normal release ones
Yeah luckily my gold TAS R32 didn't have that headlight issue (I would have been furious) but I have seen some photos of the missing headlights on those. It's really irritating when we spend our hard earned collection money on messed up models
I have all kinds of brands and none of them are 100% perfect, there're always something wrong when you start to inspect them closely including the interiors. Mini GT with its ever widening range of cars i think still doing pretty good. But they definitely can improve the QC inspections. The BBR Ferrari was rushed to release on an event could have waited for a later batch release
Yeah there will always be issues no doubt, but I think they could definitely work on bettering their brand instead of dumping money into all these events and whatnot
Hey man, I've just started collecting myself and bought the new yellow NSX mini GT x Kaido house and very disappointedly there was a massive fluff on the headlight I can't remove unless i'm willing to damage the paint. I would try inno64 but wheels don't roll. ignition model is too expensive and wheels also don't roll. I don't particularly like tarmac works design, prefer JDM street racing cars from 90s to early 2000s. Little stuck with mini GT so I'm really hoping their QC get better. Do you know any other licensed 1/64 makers I could look into?
@arjaysangalang9154 If the rolling thing is something you can get passed, Inno64 is the absolute best brand to collect. Other than that, you have pretty limited options. Tarmac does do some 90s-2000s JDM in both their Global64 and Hobby64 lines. Other than that it's pretty much Mini GT and Kaido House. (Edit: Check out Pop Race as well). Hopefully their QC will start to straighten out, but you can always return your faulty models to your seller and ask for a replacement. Or your money back if they don't have extras. Then you can get another from a different seller. Doing this is the only effective way we can get our voice out, as sellers don't want to lose money and the complaints will eventually run their way up the food chain. Appreciate you watching, and welcome to the hobby! Feel free to message me on IG if you want to chat
@@Booster_Diecast Hey man, thanks for the advice. I forgot I could exchange lol I'll know for future. I've looked into some Tarmac models, so far just not many I'm interested in. I'll consider inno64 but i don't think ill get pass no rolling wheels yet. I've looked into tomica limited vintage neo so far, they look insane so I'm waiting for a couple to arrive, pricey but feels like all the things im looking for. Do you have any thoughts on POP race? I might be wrong but looks like they started licensing now?
@arjaysangalang9154 Tomica limited vintage is amazing. I don't have any of them in my collection but the detail of those models is top notch. As far as I know Pop Race has always been licensed, except for the odd aftermarket stuff like the Singer Porsches and whatnot. I would say Pop Race is on par with Mini GT in terms of detail, but QC can be hit or miss
@@Booster_Diecast Yeah just received tomica limited vintage and it is insanely detailed! Rolling wheels with visible brake calipers and working suspension! I think i'll stick to TLVN for now with the occassional kaido house or inno64 to compare. POP race kinda makes me uneasy, their boxes don't always have the manufacturer licensed logo lol. I'm nitpicking now so I dont end up over collecting haha
@arjaysangalang9154 that's fair enough! Most of pop race stuff is licensed but some of the custom stuff is not, like RWB and Stinger porsches. I have yet to add any Tomica TLV to my collection but they are unarguably some of the most detailed 1/64s
Dang bro the comments are buzzing on this one. Feels like a bunch of eulogies 😂😭. Mine as well jump in. My very first one was the yellow c8 z06 that came with a damaged blister, mirror that was almost falling off, and paint bubbles on the side. Idk if that happened in transit but not a great first look (I lost it tho so idrc at this point). 20 models later I think I’ve been almost perfect, so if anyone reading this is on the fence I’d still say go for it, they’re great models.
Appreciate your take man. Give it some time, I'm sure you'll get another bad one 😂
I'm tuning in for the first time, hi 👋
@@ghhyh5018 Welcome!
Devo te contar administrador que todos esses Mini GT tem que ter uns cuidados, por exemplo não deixar a unha encostar na tinta e ter controle na temperatura da sua mão ao segurar na tinta pois isso causa umas bolhas
Tenha luvas ao segurar esses Mini GT
Eu tenho Mini GT e todos os meus tem seus defeitos de fábrica mas nada que incomode
i think for now the craftsmanship winner is INNO
@user-nt2fe6iq4r I would agree, their quality is really good
Inno is not always the best either. Sometimes i've seen QC issue with their product as well
@ivanbima5877 I mean, every brand has QC issues here and there. Sometimes we get unlucky but mini gt is scaring me lately lol
@@Booster_Diecast If you think current Mini GT quality is scary, I dunno what would you say about their past.
When i started collecting Mini GT about 4 years ago, QC problem also exist. Sometimes as worse as missing screw, missing light part and messy glue all in one example. Some of their early model also has higher stance, worst paint finnish and even melting wheels. Considering some of those issues aren't as worse, I would say they are on the right path
Any issues with Kaido house?
@billy5414 yeah kaido House has issues too but I don't collect them anymore
Some guy purchased 3 KH and all of them have bent axels
Thats why i dont buy lots of minit gt. my last minigt was the black gtr r35. kaido house has good production but i stop getting it as its only colour changes and milking all the r33, r34s so its repetitive. I went to get detailed versions like miniDREAM, carlounge(resin), u2, cm model is great too, lcd model is fine, microturbo etc
@machxisgaming3409 Most of what you listed are unlicensed though, which I don't support
hey boost what's up😎😎
M2 is plagued with QC issues. I hope Mini GT doesn't go that route.
I think mini gt is a long way off from being as bad as M2, but I don't want them to even be comparable
Dont forget that 2 tone Mercedes S klasses are all flawed
@@erenalp183 yup I thought I mentioned those lol
can you start a gaming channel?😅
Probably not 😅
6:12