Why I love my Ryker
HTML-код
- Опубликовано: 2 авг 2024
- Why do I love my 2021 Can Am Ryker 900 is the question of the day. Its actually a more difficult question to answer than you would think. I can say that it’s not driven by the stats for sure. Putting a feeling into words had me stumbling for a decent way of getting my opinion across. I hope I got my message across. If you disagree , agree or need clarification please leave a comment below and ill try to answer it. As always much of this is strictly my personal feelings so I guess there is no correct answer.
MUSIC USED UNDER LICENSE FROM ARTLIST
#canamonroad #canamspyder #canamryker #Ryker #Spyder #ridelikenother #WeCanAllRide #Can Am 
Авто/Мото
Did i get it right ? Let me know down below.
I wish I had a riding Buddy like you because you seem like a down-to-earth type of guy. US Army Veteran 1966 / 1969 I am 76 years old and I don't ride motorcycles anymore, but a Ryker Rally is good for 24/7 Hell Yeah! She is a Beautiful Ride! God Bless and ride safe.
Thank you. Maybe try your local clubs many have an open house where you can see if you fit in. Maybe try a VFW or legion hall lots of riders there and if worse comes to worse you make some new friends . I was late in joining an MC. The one i wanted to join only allowed American made v twins so that was a bust. But things happen for a reason and I’m happy with my new friends.
I just bought mine last week. Found a good deal on a 2020 900 Rally and scooped it up. I've already taken on challenges with it I would have feared on two wheels (think a steep, uphill road with tight, blond corners). But on the Ryker? It was easy. I have a touch of vertigo, which has made two wheels a little difficult. I feel much safer on this. The best part? I managed to pay cash, so it's 100% mine and feels SO good!
Awesome take those curves on!
my same story of how I fell in love with my Rally, PS I also keep it on a battery tender to keep the battery top notch. Be safe and enjoy every ride.
Will do
Love the channel, my ride is also a 2021 Ryker 900 Ace with a few mods. First mod was a steering damper, i commute to work via a 30 minute freeway ride in SoCal and the damper really helped with wiggly stock steering while on the freeway. Second mod is a windshield and third is a set of hand guards with LED lighting that connects to the Ryker plug and play electrical system on the left side of the cowl. Fourth mod is an LED glowlight system with a set of 6 LED lights that i tapped into the brake lights that makes the whole trike glow red when i brake. Fifth mod is the Maxmount, sixth is the LinQ top case for storage. I love my Ryker, bought used in April of 2023 with only 275 miles on it. I now have close to 4000 highway miles on it. It does attract attention because of it's unique design and thats what drew me into getting one!
Yea that design is eye catching. Your mods sound sweet I am really looking into the steering dampener myself. Which one did you install i think there are a few makers now. I had a 30 min commute as well but wasn’t blessed with California weather.
I upgraded the battery. You have to swap out the stock battery if you plan on doing anything to it at all. sway bar and end links are a must. Just the end links make a huge difference. You know me, I'm always taking this thing to the limit and back. Always riding in sport mode. I like your setup and colors. Looks good.
I honesty never felt anything with just the links . I guess a battery swap would work but you still have to charge it wouldn’t you. Thanks for liking my trikes theme, yours rocks some nice color I’m sure that gets you a lot of looks
love the video i just bought ryker 900 ace am the only one who as one in my town i love it very much and people love to come and look at they are an eye catcher
I find it funny how much attention it draws but some just cant bring themselves to say it lol. Im glad you are enjoying your new toy. I have a few mod videos on the channel if you want som ideas.
Props for getting on freeway day 1.... I'm def taking long way home from the dealer😁😁
Well I lived so I guess it wasn’t the worst decision I have ever made.
I have to agree with you partner. It's very much like riding a horse. I named mine Trigger.
Haha
re: sway bars. The BajaRon sway bar takes most of the grief out of changing one out, because it's three-piece. That means you can cut the old one to remove it, slide the new one into place, and add the end pieces. Easy peasy... the only thing you have to do is move the radiator and cooling fan out of the way. In contrast, replacing the factory sway bar with another one-piece involves a whole lot more disassembly.
If I recall correctly you don’t need to remove much to replace any of the bars. The key problem is getting the machine high enough to swing the bar in or out. The Baja 2 piece bar does make install easier and cutting makes removal easier as well.
@@SIRyker Looks like you're right about just getting the Ryker high enough. I cut my old sway bar most of the way through this afternoon, grabbed the end to break the last bit - and the whole bar basically fell out in my hand. I suspect another one-piece bar wouldn't stuff back in as easily as this one dropped out, but I'm sure it would go....
@@troystallard6895 I have seen others cut the old bar out. Totally valid way of going about things. However the unbent bar is the only one you can put back in without jacking up the trike. I have also seen someone put a nasty gouge in the control arm because the grinder slipped ! I take it you got your new bar installed so please let me know how much of a difference you think it made.
@@SIRyker I didn't get finished today; I started late and ran out of daylight. I'll knock it out tomorrow, and day after I'm making a 40 mile round trip. That should be a good test run, and I'll let you know what I think.
And yeah, I had the Ryker jacked up high. At my age (75), I'm not wild about hunching down any more than I have to while I work on things.
@@SIRyker Took it on a 40 mile round trip today, and I was surprised by how much easier the Ryker is to control on rough pavement and bumpy roads. It isn't nearly as squirrely now; it's like I installed a steering stabilizer. And if one front wheel hits a pothole, the wheel mostly bounces and absorbs it, instead of the whole bike shaking. I didn't really notice much difference on curves, but that's probably because I'm still taking them pretty conservatively. I also installed a jockey shift lever, and wish I had bought it on day one....
I have a 2021 Ryker and love mine too
Perfectly normal isn’t it.
Alain & Yellow Montreal Ace900 2021 ryker ( and old guy +60 ) .also got my helmet at the dealer now I have a collection and they call me mister safety , I ride alot in the city .. just joined and will be watching and commenting ......( many mechanical mods on mine) nothing like turbo .... FYI there is a recall on the Fuel PUMP check on BRP site .. Dec23,2023 ( I had a bad experience with Yellow with no power on a major bridge and was the pump) check that one ....still love the machine event after that event. Cant wait to get it back after winter. The only electric thing that I will be GPS. Change links, sway bar, Elkas front and back 3-4 , and steering damper, seat and many other little thing. Mine is like a panther not a horse ... smooth . Black smoke front and back lite .. I also change the peg and I have a few more..... You have a great machine ...have fun and great adventure.
Thats a bunch of add ons I’m sure you find them all worth it .
Thank you S.I.Ryker.
Your welcome
Your audio quality is great now.
Cool its one if the hardest things to get right
Moi aussi j aime mon ryker 900❤
👍
I have seen a Nolan N80-8 helmet online and appreciate they are a personal choice and need to fit right. For me this would be a first buy and I would like to know what your opinion is on this product? I notice you wear a Nolan Helmet whilst riding on your U tube videos? Thanks Mike.
Honestly I have never tried the model you mentioned. Im sure it’s a quality helmet as the maker is an established European manufacturer. Helmet choice is very personal and once you get past the obvious safety threshold it comes down to comfort and style. You see me rocking a black N44 EVO which is not made anymore and replaced by the N70-2 GT which i have as well. They are basically the same helmet! I like mine for the awesome field of view and the integrated com system. Im sure if you got the N80 you would be happy with it. I don’t believe that it is set up for an integrated com and you might wish to look into that . I also like the ratchet system as opposed to traditional D rings. The ratchet is easier to use with gloves in my opinion.
@@SIRyker Thanks for the update. It does look like a good quality helmet going to make some more enquiries before I take the plunge. 🙂👍
@@mum-0217 I think I have a fairly average head and my hemet size is medium. Where ever you get it make sure they have a good return policy if you get wrong size. Im also a big believer in pinlocks if you are in an area that gets cold.
@@SIRyker Yeah it does get cold here in the UK and it does alot of raining. 🌧️ Thanks for the advice. 👍
which heated grips did you get?
Read the entire responce important info near end
I wish i could just post the pic so ill have to give you a description i guess.
Koso AM111030 7/8" + 1" Apollo Heated Grips currently 122 bucks on Amazon where i got them in 2021 .
Koso North America Apollo heated grips for 7/8" +1" handlebars
Ergonomic thumb switch tehcnology designed to simplify the use of Heated grips
5 Color LED temperature display
Emergency low voltage cut off
Includes all parts necessary for installation.
I used a slingmods wire splitter and connected to accessory port on bike not to the battery. The accessory port is switched so no chance of draining battery.
FYI THE INSIDE OF THIS GRIP IS HARD PLASTIC AND WILL NOT SLIDE EASILY ON BAR OR THROTTLE TUBE ! I WOULD SAND THE INNER TUBE TO MAKE IT BIGGER AND REMOVE THE THROTTLE TUBE FROM THE HOUSING AND PUT GRIO ON THEN REINSTALL ON TRIKE. I BUSTED THE THROTTLE CONTROL INSTALLING MINE .
@SIRyker thank you!
You’re welcome i will also say they work really well and the installation is really clean. With the button on the grip it keeps the bars clear of clutter. But never force anything on that throttle tube the control internals are very weak and can break really easily !