Really awesome man! It’s really nice to see the younger guyz like you building and crafting with your hands! You guyz got some awesome skills! I built my first chopper from the ground up in 1972 and I remember how fun it was working on the sissy bar. I turned brass finials for the tops that kinda looked like the rooks on a chess set. Buffed them up and they looked awesome! One of my dreams is I hope God let’s me build another before I get to old and cross over! Hey! An old fart can dream can’t he?!!! Probably be a Honda. Great work guyz!
Very intresting. Im learning ppl take so much pride in bikes. But sissy bars show more its amazing how much pride one takes in each thing. Amazing work
So rad as always. Just a tip coming from a Red Seal Fabricator and previous welder, don't cool your welds in water, it weakens it and can crack it entirely or within! Not a big deal for a sissy bar, but good practice is always let it cool at a normal rate.
That was dope AF, I don’t really care for sissy bars usually. But after watching this video, I may make one to strap down my backpack. Awesome vid, I really like the creativity.
@@LNSPLTBLVD I know that!👍 I built my 50 fl from scratch for under $2,500 30 yrs ago. MMA swaps and bargain table stuff and all k8nds of things I made like my rear fender I sectioned with 4" down the middle. Lots of welding like you. But hey, what I dig more than anything is you young cats (I'm 65) are creating a great vibe and I watch everything you cats do. Question. Are you in San Mateo? The neighborhood looks really familliar.😊
Hey guys, I just wanted to say that I love your videos. You guys are the coolest group I’ve seen on RUclips. A true family. Like how you share the channel for your builds and keep it real. Much love to you guys. Have a great Thanksgiving!
If I lived within a couple hundred miles of you guys I would drop off my Vulcan 1600 classic and have you guys strip it do it justice. However living in Detroit it's too far for me to travel and wouldn't be worth it you guys do awesome work
@@LNSPLTBLVD one helps the orher! Thanks for your Nice Videos, like the true stuff about friendship, projects, meets and lots of building up Cars and Bikes. Best Regards!
This is beyond badass! You guys are about to make me act up and buy a bike with my stimulus money haha. I dont know anything about bikes right now but I hope in the future I can be like you guys, keep up the badass work homies! S/o from the 831💪
EVERYTHING is COOL.ONLY THING I WOULD HAVE LIKE TO SEE is the ANGLE of the SISSY BAR BEING ON the SAME ANGLE as the FORKS or RAKE. This is an OLD TRICK I WAS TOLD MANY YEARS AGO, that SETS the BIKE OFF AESTHETICALLY . It DOES MAKE the 2 ANGLES LOOK AWESOME WHEN they MATCH, FORKS and SISSY BAR ! THANKS
@@thatguycalledart6270 I USE CAPS ALL the TIME, it's My STYLE ! DON'T LIKE IT ? FUCK OFF ! ALSO, MIND YOUR OWN FUCKING BUSINESS ! DON'T RECALL TALKING to YOU ! LEARN SOME FUCKING MANNERS, DICKHEAD
@@davidson2004fatboy lol funny how you talk about manners while insulting him, even tough he just asked a question. and noone cares that u use caps, we just wanted to let you know it makes you look autistic as fuck especially the fact that u mix it but nevermind
I love what you do brother.. your Channel makes me do a video how i build my project in my Channel. Keep up the good works mate! Lobo Project from Philippines.
Rad vid Son. more of these. Why weld the bolt into to the sissy bar? Would have been easier to chop the head off the bolt, red loctite it into the knob and drill and tap the sissy bar. looks rad though.
Have a question bro, do we have to mount the fender after we lower the bike? I also want to mount it close to the tyre, do we have to do that after lowering the bike?
Sweet sissy bar!!!! That twisted metal is a great look. O2 /C2H2 always works better than map gas, ha ha. Is that a kick start gear that you welded on? Either way, it looks good! This bike is coming along nicely. Looking forward to the next video. ❤ Denver.
What stopped you doing the Sissy bar offline??? I mean you could've done the Sissy Bar on the workbench using a template and then fitted on the Bike right???
Love the sissy bar! Amazing craftsmanship! San Jose, I presume? (I'm from Bezerkeley, but living in sucky Texarkana for the time being!) Been thinking about buying a Honda for quite some time. A Rebel 500 with a sissy bar for my skateboard(s). Any sissy bar suggestions would be great. Much respect! PS: Just subscribed!
2:18 “Uh, I think I got carried away”. 😂🤣 Bruh, there’s nothing wrong about getting carried away when you’re being creative. Getting carried away is when you make a huge ass wing for a 1994 Honda Civic and start making wings and a body kit out of wood. 😂
Love what you boys are doing with these bikes and what you're about. Sissy bar looks awesome kinda reminds me of the iron throne .
MotoSyKillMan haha it does kinda look like Winterfell with those knobs
Really awesome man! It’s really nice to see the younger guyz like you building and crafting with your hands! You guyz got some awesome skills!
I built my first chopper from the ground up in 1972 and I remember how fun it was working on the sissy bar. I turned brass finials for the tops that kinda looked like the rooks on a chess set. Buffed them up and they looked awesome!
One of my dreams is I hope God let’s me build another before I get to old and cross over! Hey! An old fart can dream can’t he?!!! Probably be a Honda.
Great work guyz!
Very intresting. Im learning ppl take so much pride in bikes. But sissy bars show more its amazing how much pride one takes in each thing. Amazing work
I like seeing the actual work that goes into these bikes.good stuff
So rad as always. Just a tip coming from a Red Seal Fabricator and previous welder, don't cool your welds in water, it weakens it and can crack it entirely or within! Not a big deal for a sissy bar, but good practice is always let it cool at a normal rate.
Riley Rennert got it. Thanks for the tip!
very clean badass look.... nice work, real nice.
Awesome sissy bar. 👍🏻
Sissy bar looks amazing!
That was dope AF, I don’t really care for sissy bars usually. But after watching this video, I may make one to strap down my backpack. Awesome vid, I really like the creativity.
Very sick! Tomorrow I'm gonna put my own home made Sissy bar and this gave me a lot of ideas!
You be you and what you do is done best. I like that you fab all of this bike. One off for reals!
Ray Larkin Thank you! you really don’t need a lot of resources to make something cool
@@LNSPLTBLVD I know that!👍 I built my 50 fl from scratch for under $2,500 30 yrs ago. MMA swaps and bargain table stuff and all k8nds of things I made like my rear fender I sectioned with 4" down the middle. Lots of welding like you.
But hey, what I dig more than anything is you young cats (I'm 65) are creating a great vibe and I watch everything you cats do. Question. Are you in San Mateo? The neighborhood looks really familliar.😊
Ray Larkin Thats awesome Ray! and we’re in San Jose
As usual. Kick ass work 👍
Dude that’s killer.
Sissy bar looks awesome all the way up to where it sucks
Great work
I don't care who ya are, this is cool! Inspiring. Now I want to build one for my sabre 1100
Awesome!!!! Awesome!!!!
Nice work 🤘🤘🤘
Hey guys, I just wanted to say that I love your videos. You guys are the coolest group I’ve seen on RUclips. A true family. Like how you share the channel for your builds and keep it real. Much love to you guys. Have a great Thanksgiving!
If I lived within a couple hundred miles of you guys I would drop off my Vulcan 1600 classic and have you guys strip it do it justice. However living in Detroit it's too far for me to travel and wouldn't be worth it you guys do awesome work
Fashinating fabrication!
Love the style of the bikes and the content, would absolutely love walkarounds on all the bikes every now and again, keep up the quality vids my dudes
Awesome video thank you. Very helpful
Another great video guys!
Beautiful 🤪👍🏻🤟🏻
You guys give me so much inspiration for my bike guys!! Love from Georgia but currently in Cali!!
Pretty badass
You should join together and open your own custom motocycle chop shop . you have the tallent after all. Love your work .
Very cool man! Nice work.
Old school ✊🏽🤙🏾good score on the tank!gorgeous
after seeing this video i have new found respect for honda shadows ":)
Keep doing what you do bro. Love your videos, keep on keeping it real!
Steven Landers Thank you! Just having fun making something outta nothing
When first watching the build I thought the sissy bar was too high then I realized it was on a smal lift. Looks great keep up the great work.
Where did you get that metal from and twisted like that
Looks awesome!!!
Very cool.
Love from Oahu, Hawaii. The whole LNSPLT crew has the raddest bikes out there. #builtnotbought
chase yohn thank you! Can’t wait to go back to Hawaii
Está quedando de lujo 🤘
Love the crew and what you do with your bikes. Shout out oshawa canada in your next video. 👍👍👍👍👍👍👍
Really cool sissy bar, love it!
Love the fab work 👍
You guys are like the Illiminate
Great video!
Love it. Great job.
Diggin the bar my dude. Killer idea.
In the process of doing my own sissy bar, this is perfect timing. Thank you!!
cant wait to see it!
Looking good
That’s SICK😲😱🔥💯☝️I love it!
Ur the best 👍
Looks sweet . Need to invest in a rosebud tip for that torch it'll make heating and bending much easier
Yuri Welch ahh thanks for the tip!
Very good!
Dude that looks so sick!! Can’t wait to see the finished bike! Keep it up! Thanks for all the sweet videos !
Awesome bro 👏
I can dig it 👍! Definitely one off. Keep doin' what you doin'. 2 fingers down from Atlanta...
Definitely subscribing, this build looks sick so far.
looks great!!!!
Looks Dope man! Nice work...
I need more shadow builds :(
Very good job. Keep going on!
From Rio de Janeiro, Brazil.
Great video.
good job nice bike! like your videos and the rides with your friends.A Triumph biker from France.
Nice, like the Rusty-Ratstyle!
But one thing, don't cool your Welding in Water if you want a strong connaction.✌🏼
Keep up
Greetz from Germany
Han nes oh didn’t know that. Thanks for the tip!
@@LNSPLTBLVD one helps the orher!
Thanks for your Nice Videos, like the true stuff about friendship, projects, meets and lots of building up Cars and Bikes.
Best Regards!
that's one twisted sissy bar, bro! love the bike and the video.
Hell yeah came out bada$$...
Nice job man 😎
Fam... You're a beast. Love the videos
siiiiiiiiiic man!
Nice job bro!
Tail End Customs Thanks bro!
This is beyond badass! You guys are about to make me act up and buy a bike with my stimulus money haha. I dont know anything about bikes right now but I hope in the future I can be like you guys, keep up the badass work homies! S/o from the 831💪
EVERYTHING is COOL.ONLY THING I WOULD HAVE LIKE TO SEE is the ANGLE of the SISSY BAR BEING ON the SAME ANGLE as the FORKS or RAKE. This is an OLD TRICK I WAS TOLD MANY YEARS AGO, that SETS the BIKE OFF AESTHETICALLY . It DOES MAKE the 2 ANGLES LOOK AWESOME WHEN they MATCH, FORKS and SISSY BAR ! THANKS
davidson2004fatboy why you shouting dawg
@@thatguycalledart6270 I USE CAPS ALL the TIME, it's My STYLE ! DON'T LIKE IT ? FUCK OFF ! ALSO, MIND YOUR OWN FUCKING BUSINESS ! DON'T RECALL TALKING to YOU ! LEARN SOME FUCKING MANNERS, DICKHEAD
@@davidson2004fatboy lol funny how you talk about manners while insulting him, even tough he just asked a question. and noone cares that u use caps, we just wanted to let you know it makes you look autistic as fuck especially the fact that u mix it but nevermind
davidson2004fatboy are you the 2004 fat boy
@@thepolygator3628
I thought it waz cuz hes deaf,, 😅
Your sissy bar looks like some kind of sacrificial totem, i love it
heh, like it ! from Russia whis respect, bros!
I love what you do brother.. your Channel makes me do a video how i build my project in my Channel.
Keep up the good works mate!
Lobo Project from Philippines.
Dope stuff man 👊 glad I found your channel
Si fucking awesome dude !!!! I like it
Amazing work !! Support from sicily .
That sissy bar looks mint👌🏽
Amazing
ta ficando bem louco essa shadow
Bad ass it is I like a lot man
класный байк, крутые пацаны)))😎
Little bit not my style but love you guys just having a crack.
Awesome
Rad vid Son. more of these. Why weld the bolt into to the sissy bar? Would have been easier to chop the head off the bolt, red loctite it into the knob and drill and tap the sissy bar. looks rad though.
Im waiting for your road trip videos with full squad :D
Daniel Laurens same! Cant wait to ride this bike
I wish I had you guys as homies lmao I wanna do this to my shadow
Then do it! You dont need "homies" to build a bike
@@backyardbraaapn1017 facts g
Have a question bro, do we have to mount the fender after we lower the bike? I also want to mount it close to the tyre, do we have to do that after lowering the bike?
How you find the hardware that goes from sisybar to the fender , or soaces I dont know how you call it . Thanks
Put the tail light below the plate not above. Good lookin garage build!!
I like it
está ficando muito show, parabéns!
Sweet sissy bar!!!! That twisted metal is a great look. O2 /C2H2 always works better than map gas, ha ha. Is that a kick start gear that you welded on? Either way, it looks good! This bike is coming along nicely. Looking forward to the next video. ❤ Denver.
Rusty Throttle haha good eyes! its my spare kicker gear from the Shovelhead. Thanks for watching!
What stopped you doing the Sissy bar offline???
I mean you could've done the Sissy Bar on the workbench using a template and then fitted on the Bike right???
Sweet man! Definitely not another one of those around! Well done dude 🤙🤙🤙🤙😎😎😎😎
Is it better to do it with steel or aluminum
Love the sissy bar!
Amazing craftsmanship!
San Jose, I presume? (I'm from Bezerkeley, but living in sucky Texarkana for the time being!)
Been thinking about buying a Honda for quite some time.
A Rebel 500 with a sissy bar for my skateboard(s).
Any sissy bar suggestions would be great.
Much respect!
PS: Just subscribed!
enjoy your videos, the welding table you use where did you get it??
Thanks! I got it from Harbor Freight
2:18 “Uh, I think I got carried away”. 😂🤣
Bruh, there’s nothing wrong about getting carried away when you’re being creative. Getting carried away is when you make a huge ass wing for a 1994 Honda Civic and start making wings and a body kit out of wood. 😂
What kind of welder is that at 2:20?
Brosapprentice Miller 211
@@LNSPLTBLVD thanks
i wanna hang out with you guys but i live in australia lol