Thanks, Kelly. Although this video wasn't about Tieing On, it actually gave me a tip about original tensioning! What it taught me..... Don't tie the final knot before making the "warp spreading", easier than undoing a double-knot for adjusting the tension. Wow! So many "incidental" tips in all your videos. Xxx
When I first learned to weave on a rigid heddle loom, I was taught to use waste yarn alone. But I have come to prefer using 2-3 cardboard separators followed by some waste yarn. The cardboard separators alone don’t eliminate the gaps enough for me, but then it takes only a few picks of the waste yarn to finish the job, so it’s very fast compared to waste yarn alone. I also like how the waste yarn can serve as a protector against unravelling when the piece comes off the loom (if I don’t hemstitch). It only takes a few rows to get this benefit as well.
I sometimes use both a card separate because of the nice straight edge and then waste yarn to separate but I hadn't thought of checking tension that sounds really useful I'll have to rethink how I do this.
I found a roll of support strap for gardening - it's used to tie trees to stakes and such - basically about a 1 inch / 2.5 cm wide, sturdy strap. It came in a 100 ft roll. So I just cut off a bunch of different lengths as needed, and use those for separating. It works just like the cardboard sticks but more flexible. I find it works really well for me! Just an idea if there are any gardeners in the group :)
Hi Kelly . I have used both, but I think the yarn works better for me, especially when doing the hem stitch at the beginning. I think I have finally mastered the hem stitch and I am almost finished with the placemats. I have had to practice so much to get my selvedges neater and more presentable. I think I finally will have a set of placemats worth giving to someone. I am a member of the classes and I am anxious to learn so much more. I hope you never take any of this off line. It will take me years to learn everything!!! I love it.
I was using the cardboard sticks, but your waste yarn sounds interesting because of the added benefit of revealing warp tension issues. Thank you for your videos that really help us new weavers out.
Thanks, so much Kelly. I have used both as well as strips of scrap fabric. As someone else said, the video reminded me about tightening after separating the warp. I so appreciate your site and videos.
I use pieces of ribbon, about 1/4 inch wide and cut so each piece is separate. I’d say it’s kind of halfway between your two methods and works pretty well.
Thank you Kelly. I mostly use waste yarn at the start because I think it is neater and gives softer edge. plus is a nice soft cushion for the rolling on of woven fabric
Really new to weaving, but I think I will use the waste yarn, for that doesn't seem to waste as much yarn as the sticks. I read the comment of tying up 4 strands, I think I will try that too. Since I am also learning how to spin my own yarn, I want to waste as little as possible. Thank you for this! 🤗 Have a beautiful day!
When I 1st started was with the sticks. Now I just use 1 stick then I use waist yarn. for when I weave scarfs i use thicker yarn doubled after i use the 1 stick seporator only 2 or 3 depending how long i want my fringe. for tea towels i use the rogueweavers trick then 1 stick and some little thicker yarn I find helps close those gaps quite quickly. I never tried just waist yarn I will now try it knowing know how it helps with seeing tension issues wonder how well it goes if u lash on in stead of tying on. But of lately i have been sort of mixing the 2 methods of tying on to the front beam together for less waistage and easy tighten a few bundles separately then going through the painful process of pulling one big strand yarn. For just one bundle
I use the waste yarn method but also weave an inch or so of plain weave as even small gaps bug me! I will try incorporating the stick method too though now.
Hi Kelly. I usually use waste yarn. Although I like the cardboard idea. I also like your idea of checking the tension at that time too. Do you usually make one more knot on top of your surgeons knots before you begin weaving? I do to secure the tension from changing. Thank you.😊
I seem to be using both methods. The two warping sticks first, cause my sister gave them to me and then a few picks of waste yarn. Seems to be totally dependent on how the warp behaves. And I'm a beginner, so I can't predict the behavior yet.
Thanks, Kelly. Although this video wasn't about Tieing On, it actually gave me a tip about original tensioning! What it taught me..... Don't tie the final knot before making the "warp spreading", easier than undoing a double-knot for adjusting the tension. Wow! So many "incidental" tips in all your videos. Xxx
🥰
When I first learned to weave on a rigid heddle loom, I was taught to use waste yarn alone. But I have come to prefer using 2-3 cardboard separators followed by some waste yarn. The cardboard separators alone don’t eliminate the gaps enough for me, but then it takes only a few picks of the waste yarn to finish the job, so it’s very fast compared to waste yarn alone.
I also like how the waste yarn can serve as a protector against unravelling when the piece comes off the loom (if I don’t hemstitch). It only takes a few rows to get this benefit as well.
I use the waste yarn method. But today you taught me that it's a good opportunity to check the warp tension and make corrections. Thank you.
You're welcome!
I usually use the cardboard method but will try the yarn method again now. Thank you for the video.
You’re welcome 😊
In the past I've used waste yarn but will give the sticks a try. Thanks
You're welcome Catherine!
I sometimes use both a card separate because of the nice straight edge and then waste yarn to separate but I hadn't thought of checking tension that sounds really useful I'll have to rethink how I do this.
I found a roll of support strap for gardening - it's used to tie trees to stakes and such - basically about a 1 inch / 2.5 cm wide, sturdy strap. It came in a 100 ft roll. So I just cut off a bunch of different lengths as needed, and use those for separating. It works just like the cardboard sticks but more flexible. I find it works really well for me! Just an idea if there are any gardeners in the group :)
Interesting, thanks for sharing!
Hi Kelly . I have used both, but I think the yarn works better for me, especially when doing the hem stitch at the beginning. I think I have finally mastered the hem stitch and I am almost finished with the placemats. I have had to practice so much to get my selvedges neater and more presentable. I think I finally will have a set of placemats worth giving to someone. I am a member of the classes and I am anxious to learn so much more. I hope you never take any of this off line. It will take me years to learn everything!!! I love it.
Thanks Leonore, I'm glad you're making progress with your placemats! 👏👏👏
I was using the cardboard sticks, but your waste yarn sounds interesting because of the added benefit of revealing warp tension issues. Thank you for your videos that really help us new weavers out.
You're welcome 🥰
I love the stuck idea. I will try it
Great! 😀
Thanks, so much Kelly. I have used both as well as strips of scrap fabric. As someone else said, the video reminded me about tightening after separating the warp. I so appreciate your site and videos.
Thanks so much! 🥰
I have used both, and it strictly depends on the day. I probably use waste yarn. Thanks for your help.
You're welcome!
I use pieces of ribbon, about 1/4 inch wide and cut so each piece is separate. I’d say it’s kind of halfway between your two methods and works pretty well.
Sounds good!
Thanks, Kelly, I didn't realize how much of the warp is wasted with the warping sticks. I'm going to try using yarn instead.
It's actually convenient for fringe planning, but if you don't intend to have fringe then yes, it can be more wasteful.
Thank you Kelly. I mostly use waste yarn at the start because I think it is neater and gives softer edge. plus is a nice soft cushion for the rolling on of woven fabric
Lovely 🥰
I use the cardboard sticks but will try the waste yarn as it seems to close up the gaps better and shows possible tension issues. 😊
It's simple to do and you can use the same waste yarn over and over 😊
Really new to weaving, but I think I will use the waste yarn, for that doesn't seem to waste as much yarn as the sticks. I read the comment of tying up 4 strands, I think I will try that too. Since I am also learning how to spin my own yarn, I want to waste as little as possible. Thank you for this! 🤗 Have a beautiful day!
Thank you, you too! 😊
Oooh! I have not tried these but my next project I definitely will! Thank you! 🧶🙏🏽💗
Great! 😊
I don't do bundles, I tie off 4 strands at a time, then use cardboard sticks. There are no gaps this way👍
Great! 🥰
I use the second one, as I don't have those thin sticks. Thank you for the video!! ❤
You’re welcome 😊
When I 1st started was with the sticks. Now I just use 1 stick then I use waist yarn. for when I weave scarfs i use thicker yarn doubled after i use the 1 stick seporator only 2 or 3 depending how long i want my fringe. for tea towels i use the rogueweavers trick then 1 stick and some little thicker yarn I find helps close those gaps quite quickly. I never tried just waist yarn I will now try it knowing know how it helps with seeing tension issues wonder how well it goes if u lash on in stead of tying on. But of lately i have been sort of mixing the 2 methods of tying on to the front beam together for less waistage and easy tighten a few bundles separately then going through the painful process of pulling one big strand yarn. For just one bundle
I use the waste yarn method but also weave an inch or so of plain weave as even small gaps bug me! I will try incorporating the stick method too though now.
I've used both - at the same time. It depends on how big the gaps are, though I do prefer the waste yarn method.
great Info thank you i am new to weaving and never knew this will definitely do this on my next one
Great Sharon, I hope it works out really well for you 😊
@@KellyCasanova thank you i am so glad that spring the fiber enthusiast told me about you your videos are great i am doing ur log cabin
@@sharonsnow5685 Was that the log cabin Spring shared on one of her live broadcasts recently? It was gorgeous! 🥰
@@KellyCasanova yes thank you
Hi Kelly. I usually use waste yarn. Although I like the cardboard idea. I also like your idea of checking the tension at that time too. Do you usually make one more knot on top of your surgeons knots before you begin weaving? I do to secure the tension from changing. Thank you.😊
Most of the time I don't but it does depend on the yarn. If I'm using a yarn that I know to be a bit slippery I will knot on top.
Count me on Team Cardboard Stick. Two reasons: I can get weaving faster and the sticks provide a nice firm, straight edge. 😊
Same reasons for me 👍
I seem to be using both methods. The two warping sticks first, cause my sister gave them to me and then a few picks of waste yarn. Seems to be totally dependent on how the warp behaves. And I'm a beginner, so I can't predict the behavior yet.
Whatever works best for you! 😊
I use a bunch of Tshirt yarn no matter what the warp is. The same bit of tshirt yarn
👍👍👍😊
That's what I do, works really well, easy to remove and re-usable.
For me, waste yarn uses up less warp yarn. I have used both methods equally well.
Terrific!