Thank you very much for this video! I am about to replace both my headlight assemblies on my 13 Rav 4 with aftermarket ones and this video will definitely help me through the process! And also awesome music!
Well I'm about to remove both headlamps on a Client 2013 Rav4 to do and internal and external cleaning and this video is exactly what I need. Thanks man 😊
People keep in mind putting an LED bulb in a halogen housing will sometimes be worse off as it will just spill light everywhere. It can also end up blinding people. Just make sure what you are putting them into will project the light properly.
Love your video! Very clear and concise. Thanks! My only complaint is that the "Chinese JUNK" bulbs are being replaced by Sylvania "Chinese Non-Junk" bulbs. LOL
Great video. Moves along the process. Another video 1A Auto about replacing the 2012 Rav4 gives more basic help on how the retainers remove such as turning 1/4 turn before pulling, etc. This is helpful for a real beginner such as I. Thank you.
This is one of my favorite parts of RUclips. All these useful tips and videos. Thanks! $120 for the set? I've only seen $200+ ones. I'll keep looking. Edit. I think it was only for one 😂. Subscribed
Are any of the clips removed to loosen the bumper one time use clips? I wish I had seen this video before I changed my headlamps on my rav4. It was the same exact process, only I had to learn it along the way. My only blemish is not remembering how the clips and screws for the bumper were meant to go bak in.
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
Those LEDs work well inside the projector housing? This design sucks. They give me headache when chosing proper bulbs for with decent spread. Nice vid though
Because inside plastic was dirty and yellow. No way to restore it. Headlight was broken on the bottom from the inside after a small wreck for like 2 years. It's been collecting dust and moisture..
Just like the Toyota Camry. I hate taking apart of the wheel well of the bumper. The cheap ass connectors in the wheel well never come out right, they are cheap as hell and it is a pain in the ass to get that cheap ass design to line up right. 😤
you cheated by not saying the bumper had been replaced/damaged ** along with the bolt close to the tire. .You fail to show how not to break the frigging clip on either side of where the bumper attaches near the wheel. Thanks for nothing - have to replace the clip for the red bolts
I needed to replace both lights on a friends 2015 RAV4. This video saved me a ton of trouble. Thanks very much.
Thank you, sir. You made this look so easy. Great tips on removing the bumper. Thank you, again!!
thank you. I just replaced my 2013 toyota rav4 headlamp assembly following your video and it's a success. awesome!
Thank you very much for this video! I am about to replace both my headlight assemblies on my 13 Rav 4 with aftermarket ones and this video will definitely help me through the process! And also awesome music!
Great job. I just ordered my LED headlights and headlamp lenses for replacement. This is a very well done video that I will definitely use.
I’m going to replace my fender and it was noted it’s easier/better/standard to remove the headlight before doing so. Thanks for the video! Big help
Great video, thank you. Just make sure you adjust the beam hight as per manufacturer specs.
Excellent video made things easier, where do you buy the headlight assembly replacement ?
Well I'm about to remove both headlamps on a Client 2013 Rav4 to do and internal and external cleaning and this video is exactly what I need. Thanks man 😊
Where is your location?
@@Bathala22 Kingston Jamaica
People keep in mind putting an LED bulb in a halogen housing will sometimes be worse off as it will just spill light everywhere. It can also end up blinding people. Just make sure what you are putting them into will project the light properly.
@landonfolken03 this is not a halogen housing brother :) they are projectors inside of lenses
Love your video! Very clear and concise. Thanks! My only complaint is that the "Chinese JUNK" bulbs are being replaced by Sylvania "Chinese Non-Junk" bulbs. LOL
Know any USA/Canada, even Japanese made headlight bulbs?
Great video. Moves along the process. Another video 1A Auto about replacing the 2012 Rav4 gives more basic help on how the retainers remove such as turning 1/4 turn before pulling, etc. This is helpful for a real beginner such as I. Thank you.
Awesome, gald to help. that's how all my videos are, very detailed. Check more Rav4 for videos on my channel
Terrific video. I was waiting for this headlamp replacement. Great music too!
Thanks for this video ! 💯 Just changed some headlights earlier today
This is one of my favorite parts of RUclips. All these useful tips and videos. Thanks! $120 for the set? I've only seen $200+ ones. I'll keep looking. Edit. I think it was only for one 😂. Subscribed
$120 gor one. Thank you for watching
@@IvanRossS Yeah I saw that the one for the sport trim is less expensive but my mom has the more expensive headlights like yours here 😅
Olá amigo tudo bom..vc sabe me dizer que a frente completa da Rav4 2018 serve encaixa na Rav4 modelo 2015..
You made that look easy! What type of LED bulbs did you use for the low beam, and they don’t blind oncoming traffic?
Fahner bulbs all over Amazon. They will not blind people because you have a projector
Are any of the clips removed to loosen the bumper one time use clips? I wish I had seen this video before I changed my headlamps on my rav4. It was the same exact process, only I had to learn it along the way. My only blemish is not remembering how the clips and screws for the bumper were meant to go bak in.
Awesome, just the video I needed!!!
What size socket wrench was that you were using to remove all of those screws? Was it the same one meaning the same size?
What LED do you use for your low beam and why that make and model ?
Great video. Thanks. What size tires ae you running on your Rav4. I like them.
Don't remember. Don't have car anymore
Awesome! Thanks for the help. I just installed mine today and they look perfect!
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
Thank you!! Your video was very helpful 👍🏾
Those LEDs work well inside the projector housing? This design sucks. They give me headache when chosing proper bulbs for with decent spread. Nice vid though
@@InquisitiveMind876 there are plenty LED companies out there. Of course they work well in projectors :) better then any halogen
Thanks a lot!. Can you add the link/info from where you bought the headlamp assembly. Also, the basic tools required for the jobs.
You need just the basic tools and wrenches lol. Where I bought these headlines link is not available anymore. Seller don't sell them anymore.
Hello what about the strip light? I'm pretty sure it's for mostly daytime running lights how would I change the bulb? Or is it a whole new assembly?
Can you list the tools that you’re using in this video? Thank you.
Really....
From 2 years ago... of u need a list of tools and u don't have basic socket set at home. You shouldn't be doing this work. Take it to the shop
What kind of lifht bulbs did you get? Ive had some bad luck getting the light bulbs
Change the headlights and the new lights and after hours they stopped working and they no longer turn on. what could be the problem?
Hey, nice job. Coming from a boomer and all that, but learning stuff from your vid. Looks to me like you have 'the touch' for car stuff.
My bumper cover does not move when I take off the two screws in the wheel well. You have to take the whole freaking thing off
Mines neither , he full of shit or his truck is more damaged than what he thinks it is
Which low beam LEDs are you using
Company call Fahren . Cheap LED lights on Amazon. I had them for close to a year now, never had a problem. And I installed them on other cars too.
Very well done and thorough.
Anyone know if those clips break easily? Was thinking of getting a few before doing this on my 2017, just in case :)
Wondering the same thing! 2017 too
Thank you. Great video. Very help my about my Rav4. Im from Poland if you know where it is😊 Me english is very low i know.
NIce! Thanks ! Love the accent! ;-)
Hi sir.do you have vedio for 2018 rav4?
No lol. If I had. It would be on my channel
only one side?
@@martinedwards4522 title says headlamp not headlamps
@@IvanRossS guess you dont care about match
Great video, Thank you.
Where did you get this assembly?
I said in the video 1:07
Thank you 👍🏾👍🏾
Why didn't you just change the bulbs
Because inside plastic was dirty and yellow. No way to restore it. Headlight was broken on the bottom from the inside after a small wreck for like 2 years. It's been collecting dust and moisture..
Did he broke the bottom piece?
Didn't broke absolutely nothing!
Thanks
Just like the Toyota Camry. I hate taking apart of the wheel well of the bumper. The cheap ass connectors in the wheel well never come out right, they are cheap as hell and it is a pain in the ass to get that cheap ass design to line up right. 😤
Using cheap plastic screws to hold up a bumper is not a sign of quality.
you cheated by not saying the bumper had been replaced/damaged ** along with the bolt close to the tire. .You fail to show how not to break the frigging clip on either side of where the bumper attaches near the wheel. Thanks for nothing - have to replace the clip for the red bolts
@@jdinyari did not know that I had precious damage on my vehicle and you're welcome for nothing.... 🤷🤷🤷🤷🤷
Awesome, just the video i needed!