$135 Chainsaw Review! The Chainsaw Chainsaw!
HTML-код
- Опубликовано: 3 янв 2023
- If you liked the chainsaw chainsaw you can buy it here: www.amazon.com/dp/B091YC5Z16/...
Check out Gordy Here:
www.youtube.com/@westcoastsaw...
/ westcoastsaw
westcoastsaw.com/
Please subscribe to my channel!
GOT Merch available at guiltyoftreeson.com
Contact me at guiltyoftreeson1@gmail.com
Follow me on IG and TikTok
Buy my coffee at backwoodsgrind.com/treeson
$20 off JK Boots with promo code TREESON at checkout 
Развлечения
The chainsaw chainsaw with the sawchain sawchain beat my expectations. Great video
"It's all your fault about the fence, what you doing listening to a logger anyway?"😂😂😂😂
Yea that guy is a savage 😂
@@westcoastsaw1368 hahaha you and jake are the funniest 😂👌🤘
Treestuff used to have a shirt that said “the longer I do tree work the better I get at fixing fences”
Carbuetor is just fine. Chainsaw chainsaw stop working because feul line with filter isn't enough flexible and block in one position inside fuel tank.
3:55 WHAT A TRUCK!!! That thing is beautiful!! I knew i liked Gordy
Gorgeous truck.. made me want one
I have one of these, bought it from FarmerTec under a different brand name but it is identical other than the color. Believe it or not, the little thing will start to behave itself after five or six hours of use. Mine needed to break in and then after it did it has run incredibly well since. And it still starts on the first pull. I dropped it, unfortunately and can't patch the huge hole I cracked in the oil reservoir so mine is out of commission, but all in all I was damn impressed at what the little shit brought to the table for $150. If I had to guess I'd say I ran it for 50+ hours before I wrecked it, but other than the extended break in period I don't have a single complaint. Thanks for the video, and that was a badass climb!
@CaliforniaCarpenter7 interesting that is started running better. I wonder if there was some gunk in the carb that cleaned itself out?
Can you explain your running issues? I was listening to these guys talking in the video about how they had to tune it to run mine runs exactly the same.
I thought the auto-shut off was an excellent safety feature. 🤣
That was hilarious! I needed a laugh. Thank you.
Should buy 2 identical Holzfforma chainsaws, leave one completely stock and do everything possible to make it run and cut as good as possible. Port and polish, bark box, have Gordy tune it, put a nice square grind on it then run them side by side and see how much of a improvement your able to make
Put a supercharger on one of them.
Excellent video as always but with one suggestion. It seems to be a trend these days that in editing much of the work positioning (limb walking, rope setting etc) is edited out in favor of showing every limb cut. I noticed that when you walked out on the first limb it cut to the cut and skipped the actual limb walk. In fairness the walk back to the stem was left in but we can can learn so much watching you move out on the limb. Not every limb cut is a “hero cut.” Thanks and keep it up.
noticed that too. the first two videos of the new editor were tight, but now its cut, cut, cut, cut... i think a little bit less cutting would be beneficial!
I agree, i would also prefer to see more of limb walking, positioning, etc.
Good point. I do ground work,sometimes a true monkey of a climber, and it's the climbing around and rope positioning stuff that amazes me.
I agree with this too.
Dropped my first decent sized tree today. Most of what I learned has been through your videos man. I'm now enrolled in climbing school. Keep up the Soilid work hopefully I can grow a company here in my area. Thanks Jake stay safe out there
Climb high and enjoy the view
Well that is y it has no cord mount it's not ment to be hung
Bro where is climbing school Missouri don't got nothing like that so I just climb when the boss lets me or has time to teach
@@davidfish7901 I took a Utility line clearance arborist course here in California, PG&E sponsored it.
They taught us a lot of good stuff
I just googled it. I’m sure you can find something good in Missouri
For all my chainsaws and chainsaw supplies I trust Chainsaw.
I own 3 of these INEXPENSIVE chain saws. I use them for trimming from my bucket truck. Great for trimming with the top handle design. The only thing to do is put another knot at the end of the pull cord...the pull handle will otherwise pull off. Other than that, the saws start and run very well.
When a saw dies like that it usually means there is an air leak around the carb boot.
No its because fuel line with filter in gas tank. Fuel line is just not enough flexible and block in one position. When filter is blocked just cant suck fuel and stop working.
Watch out... Chainsaw Chainsaw is going to sell the auto-shut off feature for the saw!
Speaking of you get what you pay for, I won't ever forget the time I bought a new Stihl (this was 30 years ago). I had researched the rated power output vrs. saw weight and bought a Stihl 036 pro. I was amazed that some heaver saws had less power. People made fun of me because the saw was somewhat expensive relative to others but I did not realize there were "home owner" products as well as "professional" saws. Runs great and I still have it today and it has never been apart other than filters, sprockets, bars and chain. Guess it was not a bad investment.
Yes sir! I ran a guys 36 PRO and it was a beast for the weight ratio. Not so much for a reg 361/2 tho…
The PRO, yes. It handles like a hot 250 supermoto. Light, flipable,
It comes with a ring in the toolbag. It comes with the screw to attach it also
Gordy is already making parts !! Y’all should get together and bring America back into the chainsaw game !! There’s all kinds folks building saws like IRONHORSE , Dyno joe , sawdaddy from Midwest muscle saws . It be the ultimate saw 🙌🏼
I am impressed with the trim saw. Tempted to order one.
You tree climbers are amazing.
I think the little saw was frightened when you went above 75 feet high. I know I would be.
My palms were sweating watching you limbing the top.
I've had one of those babies for over a year now; love it! It's much lighter than the old 200t, "cheap as chips" and you don't have to worry about someone stealing it from the back of the truck. It's 25cc. The only gripe I've had is the fuel lines are nasty and soon get full of pinholes (due to cheap, nasty Aussie petrol).
Got a freebie ozito clone of this saw, pissed fuel out everywhere. Got a metre of line from stihl and rigged it up somewhat and it runs minty
@@nickwhite6717 stealing "minty" - love that.
I was temped to get a used ozito one
@@nickwhite6717
Too bad it’s a clamshell. That’s the only thing I see I don’t like.. But one 2511 or FIVE of these? Hmmmmmm let me think on that a momNOPE!
Same as Zenoa. I have the farmertec "joncutter" equivalent. For $100 shipped, with chain and 12" bar, it actually impressed me. I've had it for 3 or 4 years and it still starts fast. Starting to leak gasoline though. Mine has a point for a lanyard.
I had to shim around the bar studs. It wants to vibrate the carb to fast idle, but for a hundred dollar bill, I got my money's worth.
Can you send me down that top handle
@@user-eq9fi8iz2w no.
I was told doing my climbing training in Ireland that you need to always have a fabric point on a steel lanyard. Basically put a really small sling on one of the carabiners that you use to attach it to you. One as you pointed out in the vid, it's a break away point in case the limb it's around snaps and doesn't pull you with it but more importantly if you need rescuing the rescue climber can just cut through that sling and get you safely to the ground. With all your body weight hanging from the lanyard very hard to undo the carabiner and free you.
Great to see you working with Gordy! He's a pro, anyplace he works !
Great job Jake! Stay safe! Happy new year!
Awesome Video!! I love to see you guys work together!! You need to show Gordy how to make more videos!🤣🤣👍🏻👍🏻 Great Job!!
Great to see Gordy again and watch you two in action.
What kind of chain does the chainsaw chainsaw come with……., saw chain. Priceless! Have really enjoyed watching these videos!
The chainsaw chainsaw. Featuring a knock off Oregon logo too! Gotta love it lmao. 🤣
ahh yes, the chainsaw chainsaw, the epitome of commercial saws
Been waiting for this one since I saw the short.
youre not alone 😂
Love the old iron Gordy rolls around in.
Love when you and Gordy are rockin it together! I’ve got to get some WCS stuff… I want a rake gauge bad!!! LMFFAO! They look really awesome!!! Just love your video’s… stay safe and prosper !!! Jedi-Treeson, son!!! 😂😀😀
No Matter what I learn something when I watch your stuff and I been doing this Tree thing for a while.
So badass! I love watching these videos. Thank you!
New ground guy nice!!! Haha
I was literally looking at that saw on Amazon earlier today, lol there is one cheaper for Only $88, almost pulled the trigger just to see. I have been dying to by that same saw for quite a while.
I bought one of the Holzforma ones for 125.00 and love it...light weight and runs like a champ!
Another great video Jacob! Nice to see Gordy again!
I have that little saw too, she’s a good little runner, mine started off strange plug was gapped to .50, wouldn’t start, then idle was too high, still revs too much, but she cuts fine. Another vid I watched said to tune it to echos procedure with a tach. Definitely impressive for the money. Thanks
I'm a groundsman been one for about 4 years now and gordy was smashing it on the rope with little roping experience 💯🤯
'What are you doing listening to a logger' Cracked me up.🤣
That deff looks like a popular tree your taking down. I love watching your videos gives me a little more confidence to do bigger trees
I brought one of these last week from ebay Australia $100 USD under the Bahmer brand came with an eyelet bottom rear right corner. The saw is great I used a 6 litre/ 6 quarts empty oil container sliced down the middle as a bar oil drip tray. It will live in the back of the pajero/montero for fallen limbs when out 4wding
been waiting for this one 😁
I'll join that club lol
Love the video!! What are you doing listening to a logger?!! LOL!!!! I think it goes with out saying that we need more of this!! Lots more!! Thanks guys!!
A set of West Coast Saw Dogs & Clutch cover will fixxer right up 👌 😂
I bought one of these a few months ago. For $100 it runs pretty good. I use it to limb trees after falling. When it wears out I’ll upgrade to the Holtzforma you used on a previous Cottonwood adventure.
Great for limbing. Nice light weight is easy on your back too
@@ScarletKnightmare it's not really light weight for its size. For example the echo saw that's 25 ccs is 5 pounds and this saw is around 10 pounds which is the weight of other top handle saws with around 35 ccs engines .
@@mrtree1368 we must be talking about different saws because I own one and there's no way in hell it's ten pounds. Maybe 7 pounds wet with a scrench attached. Will weigh when I get home from work
Great channel. Love your vids! I have exact saw, but WITH attachment point and 10" bar/chain. Runs great, but wouldn't want to beat up the plastics. Its 25.4cc. I got mine for $88 on Amazon just a couple weeks ago! LOLOL!!!
I bought one last year and has a hook point too but we only use that one on the ground anyway
The makitas rippin!! nice job Gordy!!
lol, even the way you guys take the P, out of things is so respectful.
I have that exact chainsaw chainsaw. I haven’t treated it the best but I have been beating on it for over a year and it still runs like a champ. Mine came with an attachment point on the back. Chainsaw chainsaw
That weak-point carabiner theory really blew my mind. You're my favorite arborist, and I definitely look up to you (no pun intended)
Happy new year man
I love ur work bro with ur all of brand new Chinese chainsaws 😃😃
I have this little ripper (UK one has a few cosmetic differences) and I love it.
I got the same saw a few months ago for $119. mine definitely runs better than yours though, mine is a little screamer and doesn’t bog or die. I was pleased for the price.
I love this video!😂 “CHAINSAW CHAINSAW!”😂 I BOUGHT ONE JUST BECAUSE OF YOU AND THIS VIDEO😂 TRUE STORY! THANK YOU BROTHER!
That is one sweet pickup. Maybe you could do a part of a video with some info on that gem.
This Chain Saw chain saw sure is a nice chain saw!
Great video.
Have you guys tried the Milwaukee m18 electric CS? Would love to see a review on that.
I have one of these from the Farmertec label and it's actually a damn loyal saw. Super handy too
I have the one too, you mod the exhaust?
I have a video on my channel of stock vs mod exhaust
@@redbeardtree1776 I looked and can’t find- link?
Click on the picture by my name, the click on videos, it’s not to far down the list
It’s the 6-7 down
That’s the prob tho is the quality control you can have one like yours that runs great an another that terrible lol most the time the problem the carb on these cheap saws if you just put a good carb on most the time they run decent
I have that saw and used it for tree work and has been nothing but dependable😊 surprisingly
So nice to see you use that weak carabiner trick!!! I also do that but got roasted hard in a tree group on fb for suggesting it to someone. I feel vindicated seeing you do it lol
I like how the artwork on the saw chain box at 1:39 is a copy of the Oregon brand saw chain boxes.
Woodpeckers put the holes in the bark. Well, that's my thesis.
Gordy's truck is sweet. When's he gonna start making parts for the chainsaw chainsaw?
The parts would cost more than the saw!
I like the double stud bar clamp. Might be slightly low speed rich if it dies when flipped around.
Y’all two were funny on this video!❤❤ Thanks for a good time!
Just found yer channel. I have previously worked in the wood but just play about with firewood now.(550xp/560xp) Great vids, great advice, and the wood you cut is beautiful. Here in North Scotland wood just doesn't get that big. (Wide or tall)
I almost foam at the mouth watching some of those big hardwoods and get itchy for an axe and chopping block.
Your '8 ways to cut a tree' vid was very educational. Sub'd. Thanks.
I like to always make my back cuts some where between 1 to 2 inches above the apex of the wedge notch face cut, so the piece most likely does not kick back once the hinge liberates.
I absolutely loved this video!
That kids got balls the size of a house.
Love the vids
I have one of these small saws that works amazingly well I used it extensively to keep in the back of my truck I'm upgraded since I got it though to a Husqvarna E36 with a 14 inch bar
Clearly Gordy's punishment for the fence is he has to port Chainsaw Chainsaw for free. 😀
Gotta watch this again
Just picked up 2 neotec 25cc top handles for 130 a pop one will stay stock one will have mild porting can’t wait will be here next week
Still so disappointed I didn't get to see you guys there 😂
The same type of saw with a 10” bar are available here in Australia for around $140 AUD so you are paying a lot more.
I’m on my second one just now but I don’t use it for much bigger than 3” diameter.
The first one lasted 5 yrs and died when the fuel connector from tank to fuel lines shrank and fuel couldn’t be pumped from tank.
I’m still using the cutter bar and chains from that saw on the new saw.
Where can I buy it from? I’m in aus
@@_riley_hannah_edisons, baumr-ag too handle. Has a carry ring too
Rule #1. When running "Chainsaw" chainsaw, when in doubt, just send it. Thank you. Great to meet both of yall at tcia. Stay safe.
“Dropping a log!!!” Which is what I was doing while watching this video😂😂😂
I love it! Went to drag out my polesaw’s to do some lift and thinning and the guy and I decided that the 24” diameter oak that had experienced some storm damage In it’s top … that was about 12’ from the front door in the middle of the house was just ugly and it needed to really go to improve the overall curb appeal… I took out everything and just had about 35’ of 2’ thick oak stick…. I was thinking I’ll just cut myself a box like I’m on the left coast and my 36” bar is all I have for that 7-8’ diameter redwood… so my “chainsaw chainsaw!!!” fell a 2’ plus diameter oak tree in the front yard! The downward angle cut taking out my face cut wedge was absolutely hilarious as I didn’t have the bar length to cut out my center meat so I had to cut away wood to get that little saw in… and trying to rip oak with that little thing on the angle across the grain was just crazy!
It just needs a real Walbro carb kit in that carburetor… a steel ring with a 8” nylon wrap around the handle like for the older saw’s works great for a lanyard for them … you would be way more happy if you spent the $10 bucks on the real diaphragm kit and rebuilt your carburetor really quick… I just found an old top handle Stihl climber bar and 3-4 loops that I grabbed somewhere along the way it’s a 14”? So I’m going to be adding the decent bar and loops to my “chainsaw chainsaw!” So she’ll cut like a peach after that upgrade… the first thing I do on the Chinese saw’s is grab a good quality bar and loops… that’s a huge upgrade and it’s actually what really really matter’s… an engine is an engine if you get it running good then it’s good enough… but a great quality bar and a loop of RS or Oregon totally changes the cheapest saw’s real cutting ability and it’s feeling… that “chainsaw chainsaw!” With a little loop of Stihl RS is a totally different animal… I just love that it’s an adjustable carburetor and an open can or muffler because they aren’t ruined by all those USA epa design concepts like trying to make a catalytic converter muffler for a 2 stroke engine chainsaw… just so so stupid… be far better off with all the repair shops across the country doing a free tuning clinic on one day of the year… Earth Day… the best way to save our atmosphere is to teach the average homeowner types how they use those little screwdriver’s properly and what they are looking for in a proper tune… a little $12 dollar Amazon tachometer/hour meter with the little wire tail that wraps 4-5 times around the spark plug wire is all that’s needed to get most saw’s dialed in decent and just a tad rich… 40:1 mixture with a semisynthetic after the regular 2 stroke break in process… and we can get our $100 dollar junk saw’s to do a decade of work for the average bear!!! I absolutely love the cheapO China saw’s… these past 13 years have taught me a lot about the little 2 stroke engines and building saw’s is the hobby that probably saved my life… ! You can carefully remove that cheapO diaphragm from your cheap carburetor and soak it for an hour in ATF and the lubricating properties of the ATF will soak in and soften the cheapO diaphragm material and she’ll purr like a kitten afterwards… it’s really fantastic stuff for several different types of projects around the shop… and garage… ATF is some really good stuff and not everyone realizes all it’s “other” plus’s opposed to the making our automatic transmissions go down the road… it’s got a ton of cleaning and lubrication properties and anti corrosion ingredients that makes it really fantastic as the main ingredient in our “magic shop lube” metal thumb oiler can…. Dollar General Store’s have those old fashioned metal thumb pump oiler can’s for like $6 bucks apiece… they are $30 at a real hardware store… so if you are ever near a “Dollar General” get you a couple of those cheap oiler can’s as they are fantastic and there’s several different mixes that really make your life way better to have around… with just a regular 32:1 mixed gas mixture in one when pulling out an older saw that’s not been running in a while a couple shots down her gullet will have her Coughing and spitting right off… and that pumps up her own fuel mixture via the impulse system of the carburetor like a purge bulb would but the old saw’s didn’t have those… so it’s just an easier time to talk them into getting started again with a couple of those little drinks of the dyno juices opposed to a dozen yank’s on her pull cord…. $6 bucks apiece on those Dollar General “metal” thumb pumping oiler can’s is a fantastic deal!!! Just that left over 5w-30 or 10w-30 that is leftover from the last oil change in one of those cans is fantastic to have around for that Squeaky door hinge or wherever a little shot of a oil is needed around the house or car… and it’s just super awesome to own several old fashioned thumb oiler can’s of various different products like a real man in the 70’s would have had around his house and shop!!! Or, like my grandpa had around his shop and in the garage of the house… a little shot of you leftover oils saves a bunch of cash yearly over various spray cans products too!!!
sometimes I pour the gas in the oiler. Then pour the gas out of the oiler and into the right hole and she smokes everywhere but runs real good. Im not sure if shes got extra lubrication or the oils are incompatible. But it hasnt broken the saw yet. Starts everytime on half a pull. Thats the big 5200. not the tiny boy.
Great comment Dave.
I bought a unbranded 18” bar chainsaw off Amazon last week! Cut half a hickory that came down in the last storm, other than sharpening the chain that came with it it cut as good as my more expensive Stihl with a 16” bar! The owners manual looked identical and it came with a saw chain chain too. Must be a Chainsaw brand chainsaw lol! Oh plus it was $89.00 free shipping. Heck a new bar and chain at the saw shop would of cost that!
The chainsaw chainsaw doesn't seem like a bad saw for $135. And it actually sounds good. I might buy one just to play with lol.
Clone of Echo cs271T, another of the same dips Timberpro CS2500. 25 CC. Just repaired one with leaking tank inlet grommet. It hardened up and wouldn’t seal. Installed a thin o-ring onto the grommet and bingo no more leak. The echo part IPL looks identical. The timberpro bend gas the landward bracket
My father bought a similar one. It's small as grain of rice,but packs a lot of power
That looks exactly like Husqvarna T425 that ive got! 🤣 With a muffler mod and timing advance, different bar and chain and it cuts fairly well but its no 200! motor is good but handles and everything else is guite trash...its made by zenoah in japan so parts might fit to that chinese one...And your bangin the wedge in the tree with Fiskars axe! Fiskars is from Finland and me too! 😁🤠👍
Love the Protos helmet I’ve got the same one
First time seeing your channel. Dude's vehicle at 4:00 is nice.
Clip at 11:52 is hilarious 😂
Branch at 16:15 was cut amazingly 👏
Glad you enjoyed!
And Jake you can definitely cut through a steel core flip line almost as fast as a rope flip line I mean they're a little bit tougher but trust me you can cut right through them fast
He had a video on the old channel where he physically did it. Was not easy or fast, by any measure. Have you tried a brand of steel core flip and actually cut it, and done so easily? Highly interested.
@@WildAcresFarms oh yeah buddy there's plenty of videos out there I've never done it myself to be honest but I see in the videos on the internet it happens fast with the steel core flip line I always thought it couldn't happen fast like that but check out some videos it's crazy especially if you hit the saw right into it at a high rate of RPM it's over
It is good to see your skill improvement with your travels. That CS needs a complete rebuild. Cottonwood real brittle when wet/green. Annoyingly tough when well dried Good firewood when well seasoned. second behind acacia worldwide as firewood.
Check out the fuel line/clunk for the dying issue. And a dab of hot glue on the switch, cut with a razor blade if that keeps on. Will add a wee bit of friction and still function. Definitely impressed, need a limbing saw……..
That wee top handle saw seems awesome just needs bit Gordy magic but man his Makita animal!🏴👍 Great video u guys are great. Wish was in us could give Gordy few challenges with some saws I got. 🏴👍
these guys are top notch 🙌🙏
I remember when those saws were 80 to 90 bucks a couple years ago . But I saw ones with actual oregon bars . I would only get one as a ground saw or pruning at ground height to save some use from my more expensive saws. I'd say the cheapest you can go and still get quality is the brand redmaxx they got a a couple top handle saws you might be able to pick up for a good deal if you find one somewhere
Iv used red maxs I think they are a shindawa off brand wich makes great weed wackers and blowers. Iv used a ton a crappy saws lol so I know first hand that there nothing more aggravating than a saw that doesn’t run good when up in the tree omg it can really ruin your day lol. The saw seems to be ok when it’s running like the power does not seem to be terrible but have those fuel issues when you turn in the side suck lol. I’m not one of those guys who are brand specific ya there some models of each brand I like more than others but as long as it runs an gets the job done an isn’t a total dog I don’t care about brand name. I feel a lot of time we end up paying a lot extra just for that sticker on the side not only with saws but most gear an equipment.
Red max is made by Husqvarna their blowers are identical the parts even interchange
That is so great!🤣
Man ,you are dooing a great Job👍💪🙏,,,only a littlle fence 🤣💪🙏
“Alright, Chainsaw. Let’s Chainsaw” 😂😂😂
Like that about the chainsaw chainsaw, I bought the the same 2i had a caribeana clip, it wouldn't run so I bought a new carb and opened the airfilter and the exhaust so it was sucking and blowing a little better its been better but doesn't perform when it gets hot, to be honest I think the fuel tank and the crank are not sealed to good so air gets drawn and cuts performance, that's the only thing I can say, also the coil may be affected as its getting warmer I've had that problem with a stihl before, maybe a coil upgrade too, if you can find one to fit or engineer something to it, but then you get what you pay for, other than that it's got a great little ergonomic body and has potential but needs a good engineer to address what ive said.. Good work guys keep it up. All the best, Steve.
uk logger
It would be cool if you sent a saw to dyno Joe. Maybe the makita?
I love watching some of his dyno pulls. Seeing the numbers transforms subjective feel into objective measurable horsepower and torque.
3mins in im already impressed 😂
I have same flipline. courant is french company. I have italian oleo mac saw which chinese copyed to this 2500 chainsaw -lots of different variants of it on the net. Nice to see some gear that we use also here in Europe.
No way in hell could you get me in the top of that tree! Respect bro!
the F250 Ranger made the 135 chain saw chain saw truly worth it... That a High Boy F2fiddy