I've done the same conversion. VERY nice. Though i STRONGLY advise anyone who wants to do this, to order the barrel tubes in PLASTIC, not metal. I ordered metal and the bore came to me egg-shaped. I ended up printing my own out of PLA and just sanded them to a perfect fit. Works like a dream.
Considering how much the hammers cost to "3d print". Unless I am mistaken the only problem with the stock hammers is that the firing pin is too short. Would be cheaper to cut the old pins off and tap the hammer body to take a grub screw of appropriate length. Less elegant but cheaper.
Been waiting on a real video for these. Bought the full size one and the original shells suck ass. Might convert it too and cut it down but different then the mad max one
@@thor_269 well look up explosive enterprises cam870 build at end of long video they explain how to load the shells without the aps wads. You’ll need a 3/4” hole punch, cereal box, or frozen pizza box if you don’t want to buy water color paper. Plus that video shows how to tune the shells for different game play.
Dont use the Metall tubes! You need so many hours to fit them in the gun and after that you need hours to fit the APS in them! Order the plastk ones! Terrible fitting the Metall ones!
Me personally i want an over and under double barrel sawed off airsoft
I've done the same conversion. VERY nice. Though i STRONGLY advise anyone who wants to do this, to order the barrel tubes in PLASTIC, not metal. I ordered metal and the bore came to me egg-shaped. I ended up printing my own out of PLA and just sanded them to a perfect fit. Works like a dream.
Considering how much the hammers cost to "3d print". Unless I am mistaken the only problem with the stock hammers is that the firing pin is too short. Would be cheaper to cut the old pins off and tap the hammer body to take a grub screw of appropriate length. Less elegant but cheaper.
I was planning on getting the sawed off for this conversion but just doesn’t costs so much for how little your getting
It’s more of a nitch side arm or cosplay. It is a fun room clearing sidarm
My plastics tubes needed modified to fit into the barrels
What is the place you got these from? I've tried looking for the parts on Shapeways, but it always says that the page cannot be found. Please help!
anyone else remember Shapeways before the went out of business for no reason whatsoever?
I’m did this last year after watching explosive enterprises. Takes practice to reload in games
Been waiting on a real video for these. Bought the full size one and the original shells suck ass. Might convert it too and cut it down but different then the mad max one
I’ll trade you my short barrels for your long barrels
The longer 'step' of the longer barrel attachment is a problem for the wads, as they get stuck
@@thor_269 well look up explosive enterprises cam870 build at end of long video they explain how to load the shells without the aps wads. You’ll need a 3/4” hole punch, cereal box, or frozen pizza box if you don’t want to buy water color paper. Plus that video shows how to tune the shells for different game play.
@@leemendoza6210 I know that one. I just mean that you might need to modify the end of the extension to have everything go past there smoothly
Cool
Dont use the Metall tubes! You need so many hours to fit them in the gun and after that you need hours to fit the APS in them!
Order the plastk ones!
Terrible fitting the Metall ones!
These are plastic tubes
@@Jaeger-Precision So you are lucky! I order the metall ones!