Most respectfully Your program is very wonderful and very well captured and the graphic work done in it is great practical work and because of that it is very easy to understand. Students benefit Thanks Thanks Thanks Sir. Pakistan
Good explanation but you should use always use the proper terms while explaining otherwise new learners might be confused. For example, the first reading you take after setting up the dumpy level is called the B.S or back sight. After you turn the D.level from the same position and take the second reading after moving the staff to a new position is called the F.S or the Front sight. Now you subtract the B.S and F.S value (B.S - F.S), if the value is positive it is called Rise and if the value is negative it's called Fall. You add (Rise) or subtract (Fall) this value to the first Benchmark value (100 or 50) to get the new benchmark value. Now you can change station i.e. move the D.level to a new spot but let the staff will remain in the same position and again take the B.S reading for the new position of the D.level and so on.
Don't mind Boss 48.300 - 4.200 = 44.1, not 41.1 please correct this Bye the way good job, and your Explaining style very cool and interesting, thank you so much
4.500, 1.600, ye kaise niklte h ya phele sy question mai dete h meter aur 4,500 sy jyada nhi hoga kya jaha 4,200 likha h kyuki staff to depth mai gya h to jyada nhi hoga ussy
Sir please B.MARK kese lete hain ya phir ye har site main given hota hai ...please give full detail of this and how to take reading in actual staff..please ..real staff ki photo ya live dikha sakte ho to .....
Jab ham s1 se s2 par gaye to s1 pr jo hamare instrument ki height h vo s2 pr kese rahege vo to change ho jayegi to hame kese pata chalega ki hamne pahle instruments ki height kya thi
sir if we have excavation more than 5m and we have some work under 1m after 5m ,so in that case we need every day to shift the level from our bench mark,,so is there any solution we shift the bench mark at and then we wil every go there ,without check the orignial banch mark we will check shifted bench mark and start our work,,,,please explain
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This is the best video which makes you understand the concept. Thanks for the one who made this video.
Thank you Sir for your valuable explanation and crystal clear concept conveyance. It really made the topic easy.
#KEEP UP THE GOOD WORK💐 😃🍫
Thanks for the videos Sir, But a little bit change in a value RL 48.30-4.20=44.10,
yes thanks
Most respectfully Your program is very wonderful and very well captured and the graphic work done in it is great practical work and because of that it is very easy to understand. Students benefit Thanks Thanks Thanks Sir. Pakistan
Sir I have question,
Keyse 1st BM (RL) =50m
Keyse aya
Nice and clear information
Good explanation
Good explanation with Graphics. # Graphic helped a lot. good job
Sir ...48.30-4.20=44.10
Good explanation but you should use always use the proper terms while explaining otherwise new learners might be confused.
For example, the first reading you take after setting up the dumpy level is called the B.S or back sight. After you turn the D.level from the same position and take the second reading after moving the staff to a new position is called the F.S or the Front sight.
Now you subtract the B.S and F.S value (B.S - F.S), if the value is positive it is called Rise and if the value is negative it's called Fall. You add (Rise) or subtract (Fall) this value to the first Benchmark value (100 or 50) to get the new benchmark value.
Now you can change station i.e. move the D.level to a new spot but let the staff will remain in the same position and again take the B.S reading for the new position of the D.level and so on.
Very nicely explained...
Thanks... Please subscribe for more video like this
Very useful video for civil engineering
Thanks for reply after 1 year..
Thank you Sir for your such valuable explanation using innovative animation 💐😄🍫🍫 !!!
Nice explanation sir👍👌
Nice bro...
Thanks sir
Thanks a lot sir...keep making this type of video tqq tqq so much.
Thanks Sir for your explanations
Sir absolutely amazing video
Your explanation is too good
Very useful for survey 👍🏻
Good
Veryhelpful sir .. Thank u
Very informative
Nice 👏
Excellent video sir. thnx a lot.
Plz explain total station like ds way.. ds is nyc video..
Thank u sir sir ek vedio total station par bhi banayo total station kasay use kartay hai full deatil mein
Excellent
Really 100 likes for ur explanation ... Thank u a lot
Welcome.... Subscribe and share
Can u explain total station also please and one more thing how to carry levels from one floor to another floor while construction in site's
Excellent ❤
Excellent aur baye video with practical sewer line Ka
thank you so much for this valuable explanation, sir continue! with the good work
Very nice boss
Don't mind Boss 48.300 - 4.200 = 44.1, not 41.1 please correct this
Bye the way good job, and your Explaining style very cool and interesting, thank you so much
Which software you are using to teach. Kindly tell me about this software
Really useful video.
Sir ab isme excavation kitni krna hai hr point p
4.500, 1.600, ye kaise niklte h ya phele sy question mai dete h meter aur 4,500 sy jyada nhi hoga kya jaha 4,200 likha h kyuki staff to depth mai gya h to jyada nhi hoga ussy
Aj tak samajh naa aaya tha bhai lekin aj samajh aa gaya
Haha
Sir please B.MARK kese lete hain ya phir ye har site main given hota hai ...please give full detail of this and how to take reading in actual staff..please ..real staff ki photo ya live dikha sakte ho to .....
Awesome video
Thanks
Super sir
Respected Sir Apne calculation galat kiya hai by mistake.but your way of teaching is too good.
Nice bro
Jab ham s1 se s2 par gaye to s1 pr jo hamare instrument ki height h vo s2 pr kese rahege vo to change ho jayegi to hame kese pata chalega ki hamne pahle instruments ki height kya thi
Sir calculation table bhi show kre
Super
At 7:20 RL=48.30 - 4.20 = 44.1, you wrote 41.10
I like it
Osm sir
Thank you so much sir🙏🏻
Sir,
In this video RL of B should be 48.30-4.20 = 44.10 and hence HI(3) should be 44.10+1.30=45.40 and RL of C = 45.40-3.20=42.20
Yes Sir did a little mistake...when I used Rise and fall method for this data..I cam to know that sir had done mistake not me.😅😅😅
Amazing
Thanks
Thank You
Subscribe kar diye bhaiya ji 😅
Sir make a video on How to fill the level reading in FIELD BOOK of This type of survey 🙏
Road survey camber slope providing explain plz
Sir can u explain total station also please colomn starter marking and level checking with total station
You are the best instructor sir..respect from Pakistan
If transfer from downhill to uphill, so need to add (+)? How to know if we need to add or minus the reading sir? TQ
the process is the same
BM-FS+BS
A.o.a. sir level ki reading kis unit ma ha. Is ko Kesy parhen ?
Hi, sir ❤️.
Sir Total station pa video bano
Bridge ka point Mark karna k liya
Total video also on channel search it
Sir RL ka matlab excivetion ya filling
Yes
Or phir level ka matlab level krna matlab
RL means reduce level
Reduse level matlab kya sir
Sir, iske sat tabletion v bata digiyegaa...plz
Sir, how to write this readings in table format?
48.30_4.20=44.10good ans you roung
Upload cut & filling area video
Hi
Ty
Suppose if we take the height if the ground then how can we measure the height
Solution is available in video watch carefully
Sir slowly the RL value decreases if RL become zero then we find another RL value ?
my question is how to match TBM to TBM match the levells
Use same method
👍👍
sir,,pls sob samajh a raha he lekin bench mark hota keya he jara real image me har bench mark keya 50 m lena parta he?
Bech mark esa point hota hai jiski RL hume pata hoti hai..
@@Civiconcepts or sir RL kaise pata cholega?
Mtlb staaf se theodolite ki dori 50 mtr hone chahiye
Ok sir😉😉
Thank You Sir Ji...
Sir 48.30 - 4.20= Rl 41.10m nahi 44.10m ayega sir apne subtraction kiya wha pe
Yes ghalte har insaan se hosktee hi tumharee baat teak hi
It is rise and fall method
Hi- Height of Instrument.
BM- Benchmark
RL- Ref level
How we will get BM??? Example Here is 50 m
BM is provided by surveyor. That is surveyor job. This video only teach how to transfer RL (Temporary BM). Hope this answer helpfull.
How to use Dif
Bisect karke value kaise aa raha hai please explain
Sir
Thank you very much Sir. 🙏💐🙏
Hello sir, I hv one question . Rl of 50 matlab ?, distance hein kya center of dumpy level to bench mark ?
Level of that point
RL mean reduce level
@@Civiconcepts haa pata hein sir lekin 50 meter ka distance rakhna padata hein kya dumpy se puchri thi.
RL is known Elevation of Point and if it is not know then you can consider any value as RL for work
@@Civiconcepts sir app ke pass estimation n costing of road work hein tho link send karo na .
first point nai chota pariga ta ke garna partha he
Yes
Bhai starting RL ki kyya kahani hai
sir if we have excavation more than 5m and we have some work under 1m after 5m ,so in that case we need every day to shift the level from our bench mark,,so is there any solution we shift the bench mark at and then we wil every go there ,without check the orignial banch mark we will check shifted bench mark and start our work,,,,please explain
6m ka v staff hota hai sir
Sir BM kaise ayega
👍👍✌
Sir, yhi concept auto level me apply kr sakte hai kya??
Yes
@@Civiconcepts Tnqq so much Sir for replying me
Calculating is mistaken 48.30-4.2=44.10is correct but you calculate 41.10,
Where we found dumpy level
Bhai 48.30-4.20=44.10m आयेगा
तुमने गलत calculation की है
ONE ROUGH CALCULATION RL= 48.3-4.2=44.1m is right
Bhai reading glt h 41.10
👍
6 m ka aata hai staff
44.1 aaega na