Hi, one question please. In IKON 2 FBL software item # 7 Pitch: it's mention +12 & -12 degree pitch and 0 at mid stick. I am using Align pitch guage and I am getting the pitch what as mentioned. but in Transmitter it's mention the Normal pitch curve as -30, -10, +10 (midstick), +50, +80. something I am missing some where. I am using Futaba T16SZ. Any advise please. Thanks.
Benoy Thomas For competition hovering making the pitch curve less linear, ”flatter,” makes the model appear to be more controlled and easier for the pilot to keep it in one place over a point on the ground. See the video I linked in the comment. I have a pitch curve that is not linear to have precise control over the pitch while completing hovering maneuvers. ruclips.net/video/M-Koe-s0JIk/видео.html
In 14SG it is possible to navigate in the flight type parameters without pressing the switch, but changing the menu to the desired condition. This option is not present in the 18SZ, for example to adjust the tail gain after a brief flight, you need to turn off the model to turn the switch, change the parameters and only then can fly again the model, in my opinion a step back.
I get what you are writing about. I will make another video for you. The higher end Futaba radios have "Condition Hold". It is a button on the main screen. When "Condition Hold" is enabled you can adjust settings for your aircraft in the radio while the aircraft is still powered on. You can find this feature in the Futaba 12Z, 14MZ, 16SZ, 18SZ, 18MZ, and 18MZWC.
When setting up throttle hold, do you put a value of -100 in the throttle curve menu for hold? Or just set it up in the throttle hold menu?
Demon Heli i do not adjust the throttle curve for the Hold condition. I just adjust the hold menu item.
Hi, one question please. In IKON 2 FBL software item # 7 Pitch: it's mention +12 & -12 degree pitch and 0 at mid stick. I am using Align pitch guage and I am getting the pitch what as mentioned. but in Transmitter it's mention the Normal pitch curve as -30, -10, +10 (midstick), +50, +80. something I am missing some where. I am using Futaba T16SZ. Any advise please. Thanks.
Benoy Thomas For competition hovering making the pitch curve less linear, ”flatter,” makes the model appear to be more controlled and easier for the pilot to keep it in one place over a point on the ground. See the video I linked in the comment. I have a pitch curve that is not linear to have precise control over the pitch while completing hovering maneuvers.
ruclips.net/video/M-Koe-s0JIk/видео.html
They have removed the option to navigate the Normal, Idle1, idle2 and idle3 configuration modes from the screen. Unfortunate.
I usually just flip through my conditions via the switches. You mean something else?
In 14SG it is possible to navigate in the flight type parameters without pressing the switch, but changing the menu to the desired condition.
This option is not present in the 18SZ, for example to adjust the tail gain after a brief flight, you need to turn off the model to turn the switch, change the parameters and only then can fly again the model, in my opinion a step back.
I get what you are writing about. I will make another video for you. The higher end Futaba radios have "Condition Hold". It is a button on the main screen. When "Condition Hold" is enabled you can adjust settings for your aircraft in the radio while the aircraft is still powered on. You can find this feature in the Futaba 12Z, 14MZ, 16SZ, 18SZ, 18MZ, and 18MZWC.
Thanks for answering....
I really like
thanks
ruclips.net/video/IM8Tl7ue2xU/видео.html