I'm new to airsoft and just bought a S&T PPSH. I need a plate carrier that includes or it has a built in ballistic plates. I've only been airsofting once and although I had fun, I did not enjoy getting hit (who does). I need something that offers protection. With the PPSH the mag holds 2000 rounds so I don't need a vest with mag pouches, just with protection. Thanks for your time, Jack
A barrel longer than one foot and 1.5 inches in width may be needed to get decent performance on PMOG. In the video, Booligan claimed the projectile did not spiral in flight as his previous tests with his other launchers, and thus resulted in deviation in its flight path. Also, its range is shorter. The lack of spiraling motion may be explained by my theory that the short fins on PMOG only work when passing through a tight tube, and do little when exiting a barrel. Without the spiraling motion, the projectile is easily affected by crosswinds. And as you can see in the waving tree branches in the background, the crosswinds were pretty strong on that day. Barrel length, together with the amount of gas and gas properties, contribute to the muzzle velocity of a projectile, and thus its range. This was discussed in my previous post: facebook.com/pmogarmory/posts/325599984303435:0
Fun video, never seen anything quite like it but I'm pretty new to airsoft. When you do reviews, can you shoot the guns more & perhaps go out to a "range" where you have targets set up to measure accuracy, precision, penetration etc? :)
When I do videos, I don't do full video reviews, just video overviews to supplement my written reviews. The written reviews cover all of the details of performance including FPS, rate of fire and accuracy. The videos are mainly to show the things that the written reviews don't properly convey. Thanks for the suggestion though!
What launcher would you like to see come out? I always thought the SMAW or a mortar launcher (disregard the APS mortar because it isn't very realistic) would be cool
It's not so much about the launcher but the projectiles and launching mechanism if you intend to skirmish with them. Safety needs to be considered first. Here's a brief overview of the requirement: facebook.com/MilSimLabs/posts/10152692058911519 I'd rather see greater usage of large-bore projectiles in games before realistic yet expensive launcher replicas. Milsimlabs might come up with a product that help push in the right direction soon: facebook.com/video.php?v=10152665921706519
***** Milsimlabs is working on an M202 which might cost less than 30 bucks: facebook.com/MilSimLabs/posts/10152676532486519:0 It is based on the single barrel launcher he developed: facebook.com/video.php?v=10152665921706519
Beanzenburger That build is haunting my nightmares. My 3D designer disappeared on me with a half completed butt pad. So now I'm trying to find a new designer to start from scratch on it.
a little late here but since TAG rounds are more or less a self sustained system it should still work fine. all the magic is happening with the shell and the rifling, and if they work fine out of a GP30 which has about the same barrel length it should work fine out of this
test out the king arms m79 grenade launcher with milsim labs rockets......its the best launcher/projectile ever!!!!! still waiting for the milsim labs 40mm slugs for my mgl for room clearing
Not gonna shell out 3 bills and some to shoot just a shower. I'll buy PVC or CPVC and fire co2 cartridges to propel DIY bazooka rockets/missles/projectile.
Need TAG rounds for this. Im sure you could take the barrel apart and give it an actual barrel so to speak. Put in the 40mm TAG rounds and there you go. An actual Bazooka....
RUclips is being REALLY weird today. It's my normal 1080/60 format, but it's still showing as "processing". If it's not finished by tomorrow, I'll be taking it down and reuploading it.
Were you ever able to modify it? I was considering picking one up and that mod seems like it would improve the performance drastically.
For WW2 prop launchers, would this be the best buy or is there another product that would be a smarter purchase
I'm new to airsoft and just bought a S&T PPSH. I need a plate carrier that includes or it has a built in ballistic plates. I've only been airsofting once and although I had fun, I did not enjoy getting hit (who does). I need something that offers protection. With the PPSH the mag holds 2000 rounds so I don't need a vest with mag pouches, just with protection. Thanks for your time, Jack
Any suggestions (see comment above)
Make some plates from cardboard it's light and flexible
A barrel longer than one foot and 1.5 inches in width may be needed to get decent performance on PMOG. In the video, Booligan claimed the projectile did not spiral in flight as his previous tests with his other launchers, and thus resulted in deviation in its flight path. Also, its range is shorter. The lack of spiraling motion may be explained by my theory that the short fins on PMOG only work when passing through a tight tube, and do little when exiting a barrel. Without the spiraling motion, the projectile is easily affected by crosswinds. And as you can see in the waving tree branches in the background, the crosswinds were pretty strong on that day. Barrel length, together with the amount of gas and gas properties, contribute to the muzzle velocity of a projectile, and thus its range. This was discussed in my previous post: facebook.com/pmogarmory/posts/325599984303435:0
it all depends on the 40mm round you use, there are rounds out there that can fire 350 FPS now at EVIKE
“Cool looking shidd” telling myself that when deciding to get a new gun lmao
put they tube liner in from the fireing end so when reloading you still do it from the same end ie you still remove the liner from the hot end
Fun video, never seen anything quite like it but I'm pretty new to airsoft.
When you do reviews, can you shoot the guns more & perhaps go out to a "range" where you have targets set up to measure accuracy, precision, penetration etc? :)
When I do videos, I don't do full video reviews, just video overviews to supplement my written reviews. The written reviews cover all of the details of performance including FPS, rate of fire and accuracy. The videos are mainly to show the things that the written reviews don't properly convey. Thanks for the suggestion though!
Sorry for the late comment, but do you think a Matrix 60 Round 40mm Airsoft Grenade Shell would work too?
Any 40mm Shell will work.
@@booliganshootingsports alright, thank you!
With a bit of PVC and some good tech skills, you could probably easily lengthen the barrel all the way to the first nub.
OMG!! About the same as a S-Thunder Pistol Launcher!! Let us know how you make out on modding it.
awesome video brah keep it up with the great videos.
brah...?
What launcher would you like to see come out? I always thought the SMAW or a mortar launcher (disregard the APS mortar because it isn't very realistic) would be cool
It's not so much about the launcher but the projectiles and launching mechanism if you intend to skirmish with them. Safety needs to be considered first. Here's a brief overview of the requirement: facebook.com/MilSimLabs/posts/10152692058911519 I'd rather see greater usage of large-bore projectiles in games before realistic yet expensive launcher replicas. Milsimlabs might come up with a product that help push in the right direction soon: facebook.com/video.php?v=10152665921706519
M202
***** Milsimlabs is working on an M202 which might cost less than 30 bucks: facebook.com/MilSimLabs/posts/10152676532486519:0 It is based on the single barrel launcher he developed: facebook.com/video.php?v=10152665921706519
en.wikipedia.org/wiki/Carl_Gustav_recoilless_rifle
Relive all those BC2 moments.
***** Ohh, yes. Those look so cool. Those grenades especially, they look game-changing. And also really easy to lose, but that's beside the point.
so did you ever do the barrel mod to make it useful more?
I like the idea of having an extended inner barrel in the bazooka, but when is part 4 of the SVU build coming?
Beanzenburger That build is haunting my nightmares. My 3D designer disappeared on me with a half completed butt pad. So now I'm trying to find a new designer to start from scratch on it.
That short barrel is a bit disappointing... I wonder if it works with TAG rounds?
Should work. I don't see any reasons they won't work.
a little late here but since TAG rounds are more or less a self sustained system it should still work fine. all the magic is happening with the shell and the rifling, and if they work fine out of a GP30 which has about the same barrel length it should work fine out of this
6mm gun works or 6mm pro shop? Are they two different companies?
6mm Pro Shop. I slipped up when I said it, which is why I put up the correction caption on the video.
Redoing the barrel could make it a crew weapon as it should
I have an Airsoft Shotgun, Airsoft Pistol, and Airsoft Tommy Gun, But this is dang cool.
Sorry sir but this is a cHrIsTiAn SeRvEr
It's too bad the barrel is so short, it would have made this way cooler (and much more usable) in my opinion.
test out the king arms m79 grenade launcher with milsim labs rockets......its the best launcher/projectile ever!!!!! still waiting for the milsim labs 40mm slugs for my mgl
for room clearing
I use a wide range of Milsim Labs rounds in my other launchers. I love them as well!
It breaks in two parts because it was easier for air borne troops to carry on them during a jump.
Did you ever modify it
Can I get a gun I've never had one of those
how much fps is it?
ZhingaHD 25 fps dude,it is lame
Someone just learned a curse word :)
Not gonna shell out 3 bills and some to shoot just a shower.
I'll buy PVC or CPVC and fire co2 cartridges to propel DIY bazooka rockets/missles/projectile.
OOPS my bad.....wrong video.
...
Need TAG rounds for this. Im sure you could take the barrel apart and give it an actual barrel so to speak. Put in the 40mm TAG rounds and there you go. An actual Bazooka....
id just get the rpg 7
ive never ever been more jealous in my life
weight?
i forgot but i know a guy said it was very heavy on evike
2017?
why 360p
RUclips is being REALLY weird today. It's my normal 1080/60 format, but it's still showing as "processing". If it's not finished by tomorrow, I'll be taking it down and reuploading it.
Booligan Airsoft wait a while. It takes a while for the video to update to 1080p 60. It just has to process so leave it for a while.
Oh, I know it normally takes a bit, but I've never had a video take longer than an hour to get fully processed. I uploaded this almost 6 hours ago :\
no problem, great video besides
Вы просто дети по сравнению с нами.
0:05 what! not bad my ass! cool until you shot the lamest thing out. should be like an M40 airsoft grenade that explodes on impact!
spring balls😂😂😂😂
Really hope you don't start using a lot of potty mouth in your videos. Keep it classy.
I’m guessing you’re 10 by now.
Sweeet
digga des is en mörser
Lame af
Stupid airsoft gun i ever seen