Read my comment I had this same problem and it's because you need to run Xtreme firmware and do not download the esp flasher it's is already there... Read my comment for step by step walkthrough sorry if my writing is terrible
Just Install Xtreme firmware and do not download the esp flasher... Simply go to the gpio folder and under camera suite click esp flasher and click quick flash and choose WiFi dev board and you will see Evil portal + Marauder this will give you the download screen like Sasquatch did and your blue light will be on showing you evil portal is ready... Once doing this back out of your gpio folder and go to the WiFi folder under USB and that is the way you use the Marauder and Evil portal... I almost gave up but this truely worked I promise!!!!!
@@TalkingSasquach lol yea between keeping up with flipper content and college alone keeps me busy lol I just got time to try some things out... I don't know how you work and push out high quality videos like these it's impressive keep up the good work dude
Sasquach, wanted to say thank you! Got my board a week ago and I've been on a huge learning and troubleshooting journey. Felt the dismay of realizing Marauder32 and Evil Portal don't work off the same firmware, then decided to search your videos for solutions and here we are. Thanks again.
****FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE****** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
Does this make bigbrodudes instructions useless, and should I not be using the espwebtool to 'program' the four .bin files that are now only one... Lol where are you meaning when you say... screen?
Hey Sasquatch! I used your bin file to dual boot, marauder and evil portal, except, marauder fw is currently on v10.8 in your bin file, and the newest firmware is 12.0 from koko. Was wondering the correct way to update firmwares? If i go to esp flasher and flash just firmware b with newest marauder, the pcap files are always corrupt. Downloaded your bin file again yesterday and saw it's about to be deleted from your github. Its not a huge deal, just cant access any new features of the marauder companion app like wardrive and such. Only way to have a working marauder now for me is to use your dual boot firmware with v10.8. Anyway you could make the same dualboot file, but with v12.0? Or point me in the right direction for how to update firmware correctly? Thank you!!
Thank you for your content. For me personally. Your videos would be a 10 out of 10 ifmyou dummied some of it down instead of assuming people know already how to do something. Like instead of saying use ssh. If you instructed how to get it in the first place. Thats just me. Again, great work. Its helped a lot.
***FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE***** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
Hey Sasquatch, anyway we could get whoever made the dual boot file, to update koko marauder firmware to v12? In the dual boot file the current version is v10.8. Correct me if I'm mistaken, but we're kinda locked in to this path now. Anytime I install marauder firmware on my devboard, the pcap files are corrupt. I tried everything to fix it, reformatted my flipper and sd and flashed multiple firmwares, but only thing that makes pcap files not corrupt, is installing back the dual boot file of yours. Thanks for any help!
Thanks VERY much for this excellent work - I've been struggling to get Marauder working on my Dev board - this worked in 5 minutes!!! TYVVVVVM!!! Your stuff is great, hope you do more with David Bombal.
EAPOL packets are empty now with Momentum firmware. Is this normal bc dual boot firmware hasn't been updated for Momentum? Evil Portal works great.Thanks for all you do Squatch!
For some reason my ap is always started and displayed as "PORTAL", no matter what I set it to in the txt file or through the app on my f0. It does work as described, but who is going to select a network named "PORTAL". Any clues as to what I need to do to fix it?
Download the dual boot file. Then plug in your SD card, navigate to the apps_data, open esp flasher, then drop the dual boot file in there. I was confused as well initially. This was probably left out due to people having the flasher in different folders.
@TalkingSasquach loving the videos man, completely new to this but where do you put the dual boot directory in the flipper? or just the bin file. I tried the apps_data in esp flasher/asset directory but i cant see the file or directory. Please help
***FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE***** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
This borks my wifi dev board. I can manually flash marauder onto the board to fix it, but the flipper flashing it crashes the flipper every single time. The error message is "Flipper crashed and was rebooted screen" and that screen is stuck there until you hold left arrow and back button for a second or two and you will have to do it twice.
This may be outdate, but I am on your github and looking at your Single File Wifi Board bins, where exactly do those go? Maybe a video on how to install what you have on your github?
Dual Boot ESP32 WROOM.bin does not seem to work on Wroom boards, been trying to get it to run. Seemingly installs, just wont switch properly and none of the apps seem to interface properly as the board does not become active unless i select ESP Flasher. Anything I am missing? Tried installing the other options just results in a wrong chip type error.
Mine does that same I think. The "Enter Bootloader" option when flashing ESP 32 Vroom does not work, nor does the "Reset Board" the screen just hangs. To install I have to enter bootloader manually using buttons then tried flashing the dual boot firmware. It completes this way and I can run Evil Portal - but I cannot switch firmware. I assume this is because when you click to switch firmware it automatically enters bootloader (similar to if you were to click "enter bootloader" option) first and then re-flashes. But as it doesn't work (for mine at least) vroom board telling me to "make sure the device is in bootloader/reflash mode, then try again". So to try and switch, I can enter "bootloader mode" manually using buttons and then select switch firmware. It tells me it is a success but always ends up on the Evil Portal firmware, cannot get into Marauder. Is this the best place to bring it up?
@@skedone I have raise as issue on cococode GitHub as I "think" it could be to do with the ESP Flasher not bin files. But I do not know enough about it to be sure.
The Wifi dev board has wires hooked up to the GPIO0 and EN on the esp32 pins that can trigger a reset and bootloader from the flipper zero. At the moment connecting the ESP32-WROOM I have 3.3v, Ground, TX and RX hooked up only. Does anyone know if there is community help forum I can post to to try and figure out how to get the GPIO0 and EN pins hooked up so that it works as the Flipper expects (or am I being really stupid and basically re-creating the wifi dev board from scratch)?
Hi TS, thanks for your explanation! It's helping me a lot... But I still have a small problem, I can't make an evil portal in marauder 0.6.5, even following all your steps. In short: I flash to switch to marauder, I go to marauder 0.6.5, I try to make an evil portal, I give it the SSID and the html file but it doesn't get out of "Starting Evil portal. Stop with stopcan >"
With the ESP32 CAM flashed with the MAYHEM firmware you can use both without needing to 'switch' between. I wonder if we will be able to do the same with the other wifi boards in the future. For anyone interested in the ESP32 CAM boards I just put out a DIY video. ruclips.net/video/AKlCGNhASFU/видео.htmlsi=jjiHSs9itsj5JZYb
@talkingsasquatch Thank you so much for your videos and helping the community! Is there a dual boot file for the WROOM ESP32 chip? I keep looking around and cant seem to find one?
Great tutorial but it's not working for me. It crashes with error "null pointer dereferenced". Also, when flashing ESP there is an option for FirmwareB (assuming i could flash to that second position manually instead of flashing as dual boot), so tried that but also doesn't work and says "no core dump partition found" right at the end. Also, does this tutorial require Roguemaster FW? I am using stock.
It doesn't seem possible to return to single boot after flashing this dualboot method. Anyone been able to flash "Marauder serial sd flipper.bin" after doing this? (wifi devboard)
hi all, when i use the evil portal in marauder, does it deauthenticate the original ssid and other devices connected to this network automatically redirect to my evil portal which has the same name as the original ssid?
Does doing this require the use of custom flipper firmware? I have ESPFlasher from the flipper phone app however, flipper is running updated but still default firmware. Have they worked it out yet to allow the functionality of BP and Marauder stuff on the default firmware?
I've tried everything now. I got myself a WIFI dev board pro, but haven't been able to find any reliable videos online on how to update the firmware or flash this specific type of board. The rick-roll and scanning AP works, but when using the marauder or evil portal it shows as it should but doesn't actually do anything. As it doesn't have a usb-c port in it and the buttons are the wrong way around i haven't been able to get the updates to work and haven't been and to use t to its fullest. When trying to follow this video the bootloader on the flipper zero would only say load 0x40078000,len:12308 load:0x40080400,len:3076entry 0x40085ec. I don't understand how to get it in bootloader to flash the bootloader and the firmware's in it.
On my flipper when I go to esp flasher it says API Mismatch. I am not sure what is wrong. Could someone explain this to me? I just want to know if this is the reason it will not let me switch between marauder and evil portal since that isn't working either. All I can use is evil portal.
hi, this worked for me for a long time, now all pcap files are empty (0 byte). is there a quick fix for this problem? i flashed with flipper esp32 flasher: manual, (x) bootloader and flipper_WROVER file on my WROVER board with RM firmware. A/B switching is working, evil portal is working, scanning is working too. it finds EAPOLs, but all files have no content ... i have latest RM0223 please help
i have updated wrover to v0.13.8 at FW B and waited for some time. pcap 0-3 also 0 byte, but pcap 4-8 not empty. maybe i was waiting not long enough or FW update was helping
so i have wired a esp32s3 inside my flipper zero and i want to bootloader option to work. currently it does not without using the buttons. As i only have 4 wires soldered to the gpio pins internally the 3v3 grnd tx and rx what extra pins would i need to solder in so that entering the bootloader through the software would work thanks and your videos are great
I've seen this done like.. once on Reddit. Is this you? If that's the case I'd love to chat about it. To enter bootloader you have to connect EN/GPIO0 to RTS/DTR
No that wasn’t me but I saw it and knew I could do it. So I ordered the smallest esp32 I could find and went to work it wasn’t that hard really. Only took a couple hours and it’s still a work in progress. Scans fine but I can’t connect an antennae at the moment and really wanted this ability so needed to know what gpio pins to add. If you have more questions let me know. Your videos are great thanks for making them 😊
hallo.ich habe unleshed firmware,und es fonktioniert alles sehr gut.aber wenn ich den flipper ausschalte ,geht evil portal nicht mehr und nur nochmarauder.dann muss ich den bootloader wieder neu flashen damit wieder beides geht!kann mir bei disem problem vielleicht bitte jemand helfen?danke
Could you share the Evil Portal app you're using. I have some issues with the versions after the 0.89.0 update like other people and it would help us a lot. Thanks!
idk what i am doing wrong! i follow all the steps but it keeps giving me error: 2 make sure device is in bootloader/reflash mode. it doesnt matter how many times i do step by step and everyhting looks the exact same it gives me the error
@@TalkingSasquachNow I understand this is an alternate way to upload FW onto the Wifi Dev board. Ie through the Flipper rather than hooking it up directly to my PC to upload fw to it.
why do i have api mismatch for the flasher i picked roguemaster
Make sure you have the latest version
Pin this for others! @@TalkingSasquach
@@TalkingSasquach the latest version of Roguemaster or the latest version of ESP flasher?
Read my comment I had this same problem and it's because you need to run Xtreme firmware and do not download the esp flasher it's is already there... Read my comment for step by step walkthrough sorry if my writing is terrible
I'm running roguemaster and everything works as it should.@@desiraybelcher8371
Just Install Xtreme firmware and do not download the esp flasher... Simply go to the gpio folder and under camera suite click esp flasher and click quick flash and choose WiFi dev board and you will see Evil portal + Marauder this will give you the download screen like Sasquatch did and your blue light will be on showing you evil portal is ready... Once doing this back out of your gpio folder and go to the WiFi folder under USB and that is the way you use the Marauder and Evil portal... I almost gave up but this truely worked I promise!!!!!
100% correct, just keep in mind the age of the video. Stuff moves FAST in the flipperverse
Thank you for sharing that!
Thank you.
@@TalkingSasquach lol yea between keeping up with flipper content and college alone keeps me busy lol I just got time to try some things out... I don't know how you work and push out high quality videos like these it's impressive keep up the good work dude
@@some_stuff np 😁
Proud of how far you’ve come on this youtube stuff. Love it!
Sasquach, wanted to say thank you! Got my board a week ago and I've been on a huge learning and troubleshooting journey. Felt the dismay of realizing Marauder32 and Evil Portal don't work off the same firmware, then decided to search your videos for solutions and here we are. Thanks again.
The fact I got my Wi-Fi dev board an hour before you posted this, seems creepily useful. God I love u 🤟
FINALLY. Been struggling these days to figure out this thing, but now it is all done
****FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE****** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
Does this make bigbrodudes instructions useless, and should I not be using the espwebtool to 'program' the four .bin files that are now only one... Lol where are you meaning when you say... screen?
you gave no information
Thanks man! Was wondering this myself lol. Simple enough.
Hey Sasquatch! I used your bin file to dual boot, marauder and evil portal, except, marauder fw is currently on v10.8 in your bin file, and the newest firmware is 12.0 from koko. Was wondering the correct way to update firmwares? If i go to esp flasher and flash just firmware b with newest marauder, the pcap files are always corrupt. Downloaded your bin file again yesterday and saw it's about to be deleted from your github. Its not a huge deal, just cant access any new features of the marauder companion app like wardrive and such. Only way to have a working marauder now for me is to use your dual boot firmware with v10.8. Anyway you could make the same dualboot file, but with v12.0? Or point me in the right direction for how to update firmware correctly? Thank you!!
Thank you for your content. For me personally. Your videos would be a 10 out of 10 ifmyou dummied some of it down instead of assuming people know already how to do something. Like instead of saying use ssh. If you instructed how to get it in the first place. Thats just me. Again, great work. Its helped a lot.
Just a heads up, one thing I have found is it doesn't seem to enable bootloader or reset with the esp32 wroom. It seems to be a common issue.
How do you load the Dual Boot WROVER file to the flipper?
Yea I can’t seem to find a way to do it
***FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE***** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
Hey Sasquatch, anyway we could get whoever made the dual boot file, to update koko marauder firmware to v12? In the dual boot file the current version is v10.8. Correct me if I'm mistaken, but we're kinda locked in to this path now. Anytime I install marauder firmware on my devboard, the pcap files are corrupt. I tried everything to fix it, reformatted my flipper and sd and flashed multiple firmwares, but only thing that makes pcap files not corrupt, is installing back the dual boot file of yours. Thanks for any help!
I'd like to see an updated video of this process that works.
Which firmware should I choose if I’m running momentum firm
Thanks. do you have any documentation on how to create such bin file?
Thanks VERY much for this excellent work - I've been struggling to get Marauder working on my Dev board - this worked in 5 minutes!!! TYVVVVVM!!! Your stuff is great, hope you do more with David Bombal.
EAPOL packets are empty now with Momentum firmware. Is this normal bc dual boot firmware hasn't been updated for Momentum? Evil Portal works great.Thanks for all you do Squatch!
Thanks for everything you do man! God bless you
Awesome! It worked perfectly for me. Thank you.
For some reason my ap is always started and displayed as "PORTAL", no matter what I set it to in the txt file or through the app on my f0. It does work as described, but who is going to select a network named "PORTAL". Any clues as to what I need to do to fix it?
I'm not seeing any dual boot file within the esp flasher.... what am I missing?!
Download the dual boot file. Then plug in your SD card, navigate to the apps_data, open esp flasher, then drop the dual boot file in there. I was confused as well initially. This was probably left out due to people having the flasher in different folders.
@@WRXSNOWBOARDER Thanks I'll try that. Instructions (not just here) but across the board, are never consistent.
For those who can't run marauder. Hit reset board button and make sure you run ![ESP32]! WiFi Marauder, not MAYHEM
Works flawlessly. Thanks Sasquach.
@TalkingSasquach loving the videos man, completely new to this but where do you put the dual boot directory in the flipper? or just the bin file. I tried the apps_data in esp flasher/asset directory but i cant see the file or directory. Please help
***FOR EVERYONE ASKING ABOUT WHERE TO PUT .BIN FILE***** at the screen where it says "EMPTY" instead of pressing back you can use the black arrow at the top with the 2 dots after it to navigate the directory of your flipper just hover over it and select it . With that being said you just drag and drop the file in to the main storage for your SD card " apps, apps_assets, nfc, subghz etc." and navigate to the spot
This borks my wifi dev board. I can manually flash marauder onto the board to fix it, but the flipper flashing it crashes the flipper every single time. The error message is "Flipper crashed and was rebooted screen" and that screen is stuck there until you hold left arrow and back button for a second or two and you will have to do it twice.
My flipper keeps crashing when trying to flash the dual boot
How can I put the file to pf dual boot in esp flasher
Bootloader folder has nothing in it? on unleashed dev software
This may be outdate, but I am on your github and looking at your Single File Wifi Board bins, where exactly do those go? Maybe a video on how to install what you have on your github?
Dual Boot ESP32 WROOM.bin does not seem to work on Wroom boards, been trying to get it to run. Seemingly installs, just wont switch properly and none of the apps seem to interface properly as the board does not become active unless i select ESP Flasher. Anything I am missing? Tried installing the other options just results in a wrong chip type error.
I will check the files when I get home. That particular bin I didn't make.
Mine does that same I think. The "Enter Bootloader" option when flashing ESP 32 Vroom does not work, nor does the "Reset Board" the screen just hangs. To install I have to enter bootloader manually using buttons then tried flashing the dual boot firmware. It completes this way and I can run Evil Portal - but I cannot switch firmware. I assume this is because when you click to switch firmware it automatically enters bootloader (similar to if you were to click "enter bootloader" option) first and then re-flashes. But as it doesn't work (for mine at least) vroom board telling me to "make sure the device is in bootloader/reflash mode, then try again". So to try and switch, I can enter "bootloader mode" manually using buttons and then select switch firmware. It tells me it is a success but always ends up on the Evil Portal firmware, cannot get into Marauder.
Is this the best place to bring it up?
Same for me any news on this yet ?
@@skedone I have raise as issue on cococode GitHub as I "think" it could be to do with the ESP Flasher not bin files. But I do not know enough about it to be sure.
The Wifi dev board has wires hooked up to the GPIO0 and EN on the esp32 pins that can trigger a reset and bootloader from the flipper zero. At the moment connecting the ESP32-WROOM I have 3.3v, Ground, TX and RX hooked up only. Does anyone know if there is community help forum I can post to to try and figure out how to get the GPIO0 and EN pins hooked up so that it works as the Flipper expects (or am I being really stupid and basically re-creating the wifi dev board from scratch)?
Hi TS, thanks for your explanation! It's helping me a lot... But I still have a small problem, I can't make an evil portal in marauder 0.6.5, even following all your steps.
In short: I flash to switch to marauder, I go to marauder 0.6.5, I try to make an evil portal, I give it the SSID and the html file but it doesn't get out of
"Starting Evil portal. Stop with stopcan
>"
Help! When I scan APs it hangs on "press BACK to send stopscan" and no scans actually happen. The blue light on the devboard is on. halp?!
With the ESP32 CAM flashed with the MAYHEM firmware you can use both without needing to 'switch' between. I wonder if we will be able to do the same with the other wifi boards in the future.
For anyone interested in the ESP32 CAM boards I just put out a DIY video.
ruclips.net/video/AKlCGNhASFU/видео.htmlsi=jjiHSs9itsj5JZYb
So can you run deauth AND evil portal together? To force a target to go through the portal?
any news on the new AWOK boards?
The goosebumps shirt is dope af.
Goosebumps is a rip off of Tales from the Crypt which is also a rip off of The Dark Side. in the early 90's it was creepy. not so much now.
@talkingsasquatch Thank you so much for your videos and helping the community!
Is there a dual boot file for the WROOM ESP32 chip? I keep looking around and cant seem to find one?
We made one but it didn't work. It MIGHT not have enough onboard memory
@@TalkingSasquach okay, thanks! I'll keep up in the discord for any possible progress. Thanks for responding!
Dual boot finished successfully, blue light is on the dev board but there’s no actual option to run evil portal on my flipper?
Ok click on bootloader first but there nothing in my bootloader? What did I miss? Am I supposed to put something on there?
Great tutorial but it's not working for me. It crashes with error "null pointer dereferenced". Also, when flashing ESP there is an option for FirmwareB (assuming i could flash to that second position manually instead of flashing as dual boot), so tried that but also doesn't work and says "no core dump partition found" right at the end. Also, does this tutorial require Roguemaster FW? I am using stock.
I got this as well as the chipset error.
I got null error too
Same
Both null and chipset
Me too (null pointer dereferenced)
It doesn't seem possible to return to single boot after flashing this dualboot method. Anyone been able to flash "Marauder serial sd flipper.bin" after doing this? (wifi devboard)
Ok so when i click firmware B and i reset the board, it still shows ready for HTML, so it didnt switch. Now what do I do?
Flash it again. I had this and flashed a second time and seems to work now.
hi all, when i use the evil portal in marauder, does it deauthenticate the original ssid and other devices connected to this network automatically redirect to my evil portal which has the same name as the original ssid?
How to rename SSID in Evil portal? I'm trying to rename through the application menu but it doesn't save the new name...
Does doing this require the use of custom flipper firmware?
I have ESPFlasher from the flipper phone app however, flipper is running updated but still default firmware. Have they worked it out yet to allow the functionality of BP and Marauder stuff on the default firmware?
when i go into your repo for the dual board bins it doesnt have the function to get and install on flipper. how can i get this?
I've tried everything now. I got myself a WIFI dev board pro, but haven't been able to find any reliable videos online on how to update the firmware or flash this specific type of board. The rick-roll and scanning AP works, but when using the marauder or evil portal it shows as it should but doesn't actually do anything. As it doesn't have a usb-c port in it and the buttons are the wrong way around i haven't been able to get the updates to work and haven't been and to use t to its fullest. When trying to follow this video the bootloader on the flipper zero would only say
load 0x40078000,len:12308
load:0x40080400,len:3076entry 0x40085ec.
I don't understand how to get it in bootloader to flash the bootloader and the firmware's in it.
YOU ARE A BEAST! THANK YOUUUUUUUU IT WORKS!
where does the .bin file upload onto the flipper?
On my flipper when I go to esp flasher it says API Mismatch. I am not sure what is wrong. Could someone explain this to me? I just want to know if this is the reason it will not let me switch between marauder and evil portal since that isn't working either. All I can use is evil portal.
i have this same issue
make sure the ESP flasher your downloading is the same as the firmware your on, i had the same issue
Pls help I have no idea how to add the dual boot wrover file to my flipper
It keeps crashing the device with the error "NULL pointer dereference". Anyone else seeing that?
Same here
Me too
solved?
Oh my G! Thank you so so so much!
do I need to do this if I have the awok dynamics dual v2 touch screen?
how do i add the duel
hi, this worked for me for a long time, now all pcap files are empty (0 byte). is there a quick fix for this problem?
i flashed with flipper esp32 flasher: manual, (x) bootloader and flipper_WROVER file on my WROVER board with RM firmware.
A/B switching is working, evil portal is working, scanning is working too. it finds EAPOLs, but all files have no content ...
i have latest RM0223
please help
i have updated wrover to v0.13.8 at FW B and waited for some time. pcap 0-3 also 0 byte, but pcap 4-8 not empty. maybe i was waiting not long enough or FW update was helping
why is my flipper zero stuck at entering bootloader
Is there a dual boot bin for the Wifi Dev Board Pro?
can you explain how both of these fírmwares are on there at the same time? sry if i ask stupid questions
Can anyone tell me why when I try to scan on marauder it only says “press back to send stop scan”
I keep getting a crash and a NULL pointer dereference?
Same
solved?
so i have wired a esp32s3 inside my flipper zero and i want to bootloader option to work. currently it does not without using the buttons. As i only have 4 wires soldered to the gpio pins internally the 3v3 grnd tx and rx what extra pins would i need to solder in so that entering the bootloader through the software would work thanks and your videos are great
I've seen this done like.. once on Reddit. Is this you? If that's the case I'd love to chat about it. To enter bootloader you have to connect EN/GPIO0 to RTS/DTR
No that wasn’t me but I saw it and knew I could do it. So I ordered the smallest esp32 I could find and went to work it wasn’t that hard really. Only took a couple hours and it’s still a work in progress. Scans fine but I can’t connect an antennae at the moment and really wanted this ability so needed to know what gpio pins to add. If you have more questions let me know. Your videos are great thanks for making them 😊
I freaking love this thing!
dude thanks! That is so awesome you can switch
How come my flipper never works on the web interfaces It ask if I want to connect it. I have USB debugging on. I can't seem to figure it out.
make sure qflipper is closed
Will this also work the same with justcallmekoko's wifi dev board pro? 🤔
When i tried bootloading it finished and said waiting for HTML what do i do
I guess this isn’t necessarily with the Mayhem v2 board?
Will u release a dualboot WROOM version?
will this dual boot bin file work on all firmware, mine crashed after flashing , im on unleashed
algum update? tem o link do repositorio oficial do dual boot arquivo unico?
does dual boot means you can run evil portal and deauth at the same time?
Hallo talking sasquatch when do you can put a dual boot for esp wroom
hallo.ich habe unleshed firmware,und es fonktioniert alles sehr gut.aber wenn ich den flipper ausschalte ,geht evil portal nicht mehr und nur nochmarauder.dann muss ich den bootloader wieder neu flashen damit wieder beides geht!kann mir bei disem problem vielleicht bitte jemand helfen?danke
Is Flipc down ? Nice info BTW
It doesn't work. I'v got Evil Portal in both firmware.
Read my comment
@@desiraybelcher8371 thank you very much!
Could you share the Evil Portal app you're using. I have some issues with the versions after the 0.89.0 update like other people and it would help us a lot. Thanks!
do you need the microSD card slot mod on the esp32?
Do you install it on new SD Card that's? been formatted
idk what i am doing wrong! i follow all the steps but it keeps giving me error: 2 make sure device is in bootloader/reflash mode. it doesnt matter how many times i do step by step and everyhting looks the exact same it gives me the error
lol i had the same issue are your sure the tx and rx pins are in the right place?
Can you dual boot off a esp32 wroom
Professional presentation. Tnx for putting this up
Does wrover work on esp32-wroom?
can i use both at the same time
hey, why do i have invalid chip id?
Thank you so much for everything!!!!
Deauth is red lighting but scan ap works any help?
I can’t deauth either, and everything else works, you figure it out?
Sadly doesn't work for multi board , will set evil portal fine but can't go back to maurder
What kind of multiboard do you have?
idk.
I have the same problem too
i'm using awok's esp32 v3 and it just gets stuck on "entering bootloader"
it probably has something to do with me not pressing the buttons doesn't it
this project is awesome.
It's been awesome watching it grow!
Rad! Thank you very much for this! Just made life a little bit easier lol
does is work with awook board
I'm still scratching my head why this is needed. Isn't Evil Portal an app on the Flipper? Why would I need to load it onto the wifi board?\
Flipper doesn't have wifi, you need a board for it
@@TalkingSasquachNow I understand this is an alternate way to upload FW onto the Wifi Dev board. Ie through the Flipper rather than hooking it up directly to my PC to upload fw to it.
thank you!
thank you sasquach i love itn
This would be awesome if we could use Evil Portal+ beacon spam together, put like 20 different traps up XD
When I go to Flash ESP -> Bootloader it is an empty list. Do I need to anything more?
did you figure this out? i have the same issue
I have the same issue, anyone figured this out?
same issue i wish some one would chime in and help us out!!!
@@thewannabehackr5078
Anyone who knows where to download portals already made for the evil portal app?
This works also on esp32-wroom?
I have WROOM and it gives wrong chip ID error but also might be possible i am doing something wrong
First to say they were first after the first.