PRO Tank Ring Mounting - Tutorials | SW-MOTECH
HTML-код
- Опубликовано: 24 авг 2024
- This video shows you how to fix the tank ring on your motorcycle:
Included in the delivery are the tank ring made fibreglass reinforced plastic, the mounting ring and all necessary screws. First remove the original screws from the mounting points on the tank cap ring. Place the spacers in the holes of the original screws. The prevent the tank from scratches by lifting the tank ring. Now place the mounting ring and fix it with the 2 screws. Please choose the screw with the appropriate length for your bike. Then put the tank ring on the mounting ring.
Place the allen screws in the front holes. The two sleeve nuts fit into the holes in the tank ring.Tighten all screws and take care of the torque of 2 Newtonmeter indicated fort he allen screws and the sleeve nuts.
After installing the tank ring, make sure that the gas cap can be opened and closed without restrictions. Now you can place your PRO tank bag on your tank ring.
Get the PRO tank ring for your bike:
sw-motech.com/...
-----------------------------------------------------------------------------------------
"Thumbs up" if you like the video!
Any questions? Leave a comment.
Don´t miss new videos! Subscribe our channel: / swmotechrausc. .
More news and information about our products:
facebook: / swmotech
Instagram: / swmotech
twitter: / sw_motech
-----------------------------------------------------------------------------------------
SW-MOTECH is one of the internationally leading suppliers of motorcycle accessories. SW-MOTECH is partner of BMW, Ducati, Kawasaki, KTM, Moto Guzzi, Suzuki and Yamaha for developing and production processes of original accessories and delivers its products into more than 60 countries.
SW-MOTECH GmbH & Co. KG
Ernteweg 8/10 | 35282 Rauschenberg | Germany
Service Hotline: +49 (0) 6425 8168 050
www.sw-motech.com - info@sw-motech.com
Sehr gutes System bin begeistert, nutze seit kurzem den Pro Daypack 👍🙂
Das freut uns sehr :) allzeit gute Fahrt!
Heute verbaut. Sehr einfach. Nutze auch den Pro Daypack. Kommende Woche kommt auch mein Navihalter für meine 1000er Versys ;)
😍🤗
Ein cooles System. Hab jetzt erstmal den Micro als Tankrucksack. Die kleines Schrauben für den Plastering selbst konnt ich nun nicht mit 2 NM anziehen, mein Schlüssel geht nur bis 2,5 NM. Hab nach Gefühl angezogen, und mit Loctite gesichert, das sollte passen.
Ist jetzt schon das zweite System nach meiner 125er. Zuerst aber nur mit dem Evo System.
The video shows that screws are installed without liquid threadlocker, however the manual suggest using it. Do I have to use threadlocker when installing this tank ting?
You don't need treadlocker😊
Already mounted on a Kawasaki Z900 - Was really easy.
Sometimes you have to remove the tank cover/lock and replace the cover, like in my case
Hi Christof, glad you like the system :) You´re absolutely right - in some cases the mounting includes an extra step. The video shows the most common way of mounting. Ride safe!
Hi, do you have video how to change PRO Tankring on Yamaha MT07 2021?
Wich tankbags are suitable for the Husqvarna 901 ? I.c.w. the SW-Motech lockingring for the Norden 901 ?
For a very long trip i need a lot of space in a tankbag. Also the capability to hold a 7.8 color e-book reader. The E-Book reader will be used for the larger over-view of maps.
From what i can see i have the idea that the SW-Motech tankring is quite a bit to the rear of the tank. I allready own a EVO GS tankbag. But i think that it will not fit on the Norden. So i am very curious wich (newer) tankbags are suitable. It may not interfere with a little bit offroad riding.
I want to order the tankring, the tankbag and the map addon in one order. But it is a bit of a guess wich tankbag will fit and wich not.
hello, Which one is suitable for hero x pulse 200 ?
tja so einfach geht das natürlich schonmal gar nicht. Bei meiner Maschine sind da nämlich Blenderschrauben wo der Tankring festgeschraubt werden soll. Also hab ich da auch gar kein Gewinde. Für den Laien ist das nicht zu bewerkstelligen. Mal sehn obs meine Werkstatt hinbekommt. Kann ich schön nochmal Kohle ausgeben. Würde ich nichtmehr kaufen!
Ich finde dieses System top.Meine Frage: Passt das auch für Afrika twin BJ.2017 PD06?
Hi Peter,
den passenden Ring für dein Bike findest du unter : sw-motech.com/Produkte/Gepaeck/Tankrucksack/PRO+Tankring/4052572189382.htm Für dein Bike passt der City,Yukon WP, Daypack und Micro Tankrucksack
Erlischt nicht die BMW Garantie wenn ich hier schraube oder übernimmt sw mototech das ?
Heute verbauen wollen ...
Auf meiner KTM 890 ADV R ist es aber leider so, daß ich den Tankring wegen der Öffnungsrichtung des Tankdeckels verkehrtherum einbauen mußte - also offene Seite nach vorne.
So aber passt der Tankrucksack nicht mehr, was mich aufgrund der asymetrischen Geometrie des Tankringes auch nicht wundet.
Was tun ?
You have to mount the tankring other way around like you say, but also the part under the tankbag. turn that around and then the red cord should be where your seat is. That's the only way
I have two tankbags with EVO system. Is there any way these can go on the new system as I have my eyes on a new smaller tankbag as it does not seem like the EVO is avaiable anymore?
Hey @karstenlund8956, glad you chose our tank bags before. Unfortunately, the EVO tank bags don't fit to the PRO tank ring, because the system improved. But we still have some EVO tank rings in stock. You can check out our webshop and see if we have one for your bike sw-motech.com/en/products/luggage/tank+bags/EVO+tank+ring/
You got a video how to remove the fuel tank cap to fit the one you guys sent ?
Hey @needtobike, we don't have a video how to remove the fuel tank cap. But we can try to produce a video. What bike do you drive? Maybe it is very easy on your bike
@@SW-MOTECH All good, turns out it was easy as hell. Thanks
Habe gerade auch den Pro City montiert. War ziemlich fummelig da die verschiedenen Schrauben unterschiedliche Werkzeuge brauchen. Aber ist schon ein geiles Produkt.
Hallo Thomas, danke für das ehrliche Feedback. Die Schrauben sind durch die möglichst dezente Optik natürlich recht klein und filigran und je nach Modell unterschiedlich, absolut richtig. Dadurch kann, wie du sagst, ein Werkzeugwechsel notwendig sein. Wir hoffen, du hast den Anbau trotzdem gut hinbekommen und hast mit der Benutzung jetzt den spaßigeren Part vor dir 😉
@@SW-MOTECH Von letzterem gehe ich aus. 😊
Hi, could you please tell me which is the right PRO ring model for my MV Agusta Turismo Veloce Lusso SCS? Thank you so much in advance.
Hi @macaddict4183, unfortunately we don't have a right tank ring for your model. But you can send us an e-mail to info@sw-motech with the measurements of your tank. Maybe we can help you find a tank ring.
@@SW-MOTECH thank you so much!
I have a 2016 KTM 1290 super adventure. Right now I am using the givi tanklock system. When I need to remove the fuel tank, I also need to remove the tanklock system because there is a plastic tank cover. Your system looks much smaller in size, can I remove the plastic tank cover without removing your mount?
Hi Dimos, which tank cover do you mean exactly? Our tank ring is smaller, that is correct. It is screwed directly onto the tank filler neck, which in turn is screwed onto the tank. Here you will find our instructions:
sw-motech.com/cosmoshop/default/artikelpdf/trt_00_787_30600_b.pdf
@@SW-MOTECH the 1290 has a plastic cover that goes over the fuel tank. In order to remove the tank, I need to remove this cover first, which means I need to remove the givi tanklock ring every time. Looks like your ring is small enough so I won't have to take it off every time
Hi mir ist ein Missgeschick passiert ich hab die schwarzen Hülsen falsch rum reingemacht die sind auch dann bündig mit dem Tankring. Ich krieg die jetzt nicht mehr raus weil das Magnet so stark ist. Hebt es auch so oder wie kann die schwarzen Hülsen da wieder rausbekommen?
Hallo,
wenn der Tankring noch nicht festgeschraubt wurde, dann sollten die Schrauben mit einem kleinen Gegenstand (Schraubenzieher oder ähnlichem) entfernbar sein. Gerne kannst du uns auch hierzu eine kurze Mail an info@sw-motech.com zukommen lassen. Unser Sales Team hilft dir gerne weiter :)
// JS
Welches Drehmoment für die Schrauben?
4,5 NM
Servus mein daypack pro + ring ist heute eingetroffen :) könnt ihr mir vl bei der Frage helfen welche Tankschrauben für die Yamaha Modelle passen vielen Dank :)
Hallo SpLasH8691,
leider variieren die Längen der Schrauben auch Herstellerintern. Bitte vergleiche die Schrauben, welche du herausschraubst, mit denen von uns mitgelieferten. Wähle dann die Schraube welche maximal um die Höhe des Blechringes länger ist als die Originale. //AS
I bought the micro pro for my triumph tiger. I am disappointed that I can't keep my electronic devices and cards (inside wallet) within the main compartment. The tank bags are mainly for that purpose. Really bad design if this is the case. Can you think of other things a biker would keep in the micro size?! Cmon! Or please call this out or havethe dealer mention this to customers. I got to know when opening the installation guide. Really?!?
Hi khizer khan, we´ve intensively tested the products regarding their magnets´ influence on technical devices or credit cards and can assure you that it is safe to store them in the main compartment. The disclaimer in the mounting instruction is a precaution. Just to be extra sure, you can store them in the lid compartment if possible but it is safe to use the main compartment.
Thank you for the assurance. I will use the compartment then 👍
You´re welcome and sorry for the confusion. Have a great day and ride safe :)
I have another query.. What's the part number for the tank ring for 2019 Triumph Tiger 800? What I bought says MV Augusta/Triumph. And the ring slightly touches the paint work around the tank cap in the corners. Maybe it's the wrong tank ring for tiger 800 2019?
The tank ring for the Tiger 800 models ´19 is TRT.00.787.16000/B. It states in the mounting instruction that there may be contact with the paint. This is why there are protection staps included. You can have a look right here: sw-motech.com/cosmoshop/default/artikelpdf/trt_00_787_16000_b.pdf
Just received my PRO DAYPACK, only to find out it's the MAGNETIC one..
Worst naming in the history of marketing.
If it's PRO, it's for the PRO tank rings.
Don't do an exactly named bag with a different system..
Yes, frustrated to have to return item, wait for refund, order again, wait for another delivery, and another weekend ride without a tank bag.
Hi Sam, can you please send us pictures of the facts? We also need your motorbike and the article number of the ring. Please send us the information to the following maill address. We will then contact you. Thank you. // DH
info@sw-motech.com