old Italiano who builds small sailing catamarans in SW FL, USA...* ...know these fine builders are GENIUS !! :-) Can't wait to see the next Chapter!! *.../1/4" ply'wd, epoxy/glass/cf. Sure, I'd do things differently, and different coatings, joinery, and other VITAL-stuff :-), but...heyyyy...if yas wanna float yas boat, this smart vessel is great ! thanks...buona fortuna~
@@johannengelbrecht2168 it’s a long coffin with no flare, no rocker and no sheer, you might as well guess the dimensions from the height of his knees the difference it would make. Proper plans from a proven designer are cheap and would not only save you time and money but would probably save your life.
Bizim ellerin dediği gibi durgun sularda ve daha verimli olacaktır. Salması olmadığından çok daha sığ sularda bile (50 cm) kullanılabilir. Ruhsat için yapım aşamasındaki fotoğrafları ve malzemelerin faturasıyla imal ettiğin yerdeki liman başkanlığına başvurman gerekiyor.
Dear Sir, I am from Brasil and planing made a catamara look like yours , 6,5 meters x 4 mts , each hull 0,6 meters could you send details for your construction. I will be very glad because I have some ideas but nom experience. Thanks
@@ozgurgursu8093 Thanks for your reply.. I need the wood thickness of the structure of each hull and wood plate thickness for lateral coveriside hull. I need the resin used and layers of fiberglass used and gramature of fiberglaas fabric. Thanks in advance ( sorry of my poor english )
@@salimdana124 the width of the trunks is 55 cm. Sides covered with 6 mm marine plywood. 200 grams of fiber and epoxy resin were applied on them twice. Sanding was done between each coat, then epoxy putty was applied. ready to paint now. I did the primer paint. I am now building the platform and cabin.
Fotoğraf taki usta Daimi abi değil mi tanıyorum kendisini çok değerli bir insandır daimi ustayla nasıl iletişim kurabilirim yardımcı olursanız sevinirim
old Italiano who builds small sailing catamarans in SW FL, USA...* ...know these fine builders are GENIUS !! :-) Can't wait to see the next Chapter!! *.../1/4" ply'wd, epoxy/glass/cf. Sure, I'd do things differently, and different coatings, joinery, and other VITAL-stuff :-), but...heyyyy...if yas wanna float yas boat, this smart vessel is great ! thanks...buona fortuna~
Very good, thank you, God bless you. Greetings from Greece.
Nikos, thanks much. I doubt that they could understand english, but I am sure they appreciate your good wishes👍🙂
Zor olsa gerek fakat gayet başarılı tamamlandığını da görmek isteriz
Allah gönlüne göre nasip etsin açıkca benimde niyetim var yapmak 6 metrelik düşünüyorum nasipse
Teşekkürler. İnşallah başlamak sizede nasip olur.
Eline emeğine saglik hocam 10numara takipcinim en kısa zamanda bende başlıcam allahın izniyle
Congratulations! What are the measurements of the hull?
Thank you for providing material, my dreams
thanks for sharing looks very good, where can i get hold of the plans to build one for myself?
Why would you need plans to build that ?!
@@redreuben5260 for the dimensions!!!!!!!
@@johannengelbrecht2168 it’s a
long coffin with no flare, no rocker
and no sheer, you might as well guess the dimensions from the height of his knees the difference it would make.
Proper plans from a proven designer are cheap and would not only save you time and money but would probably save your life.
@@redreuben5260 you're right, but some of us enjoy accomplishing our own things, this is an okay pantoon boat, nothing more🙂
@@johannengelbrecht2168 Looks like he just made it up. Give it a shot. Working with out plans is rewarding. Draw it on a napkin and build it.
Süper hocam,kolay gelsin devamını bekliyoruz.
Hola es primera vez que veo el vídeo espero de todo corazón que hayas podido cumplir tú sueño
Great! I subscribed to your channel! I'm in shipbuilding
I like your project idol
.
Why not to make a smooth shape? It is not a different what you have built.
Where to you built her?place
Katamaranın kendinden ziyade motor ve aksesuarları daha pahalı oyuzden beklemede şimdilik
Baraj ve göllerde iş görür mü?.Bir soru da şu ruhsatlandirma nasil olacak?
Baki kasirga, bu tekne aslinda durgun sular icin elverisli, o yuzden dedigin yerlerde ise yarar ama heyecanli sularda denememek lazim
Bizim ellerin dediği gibi durgun sularda ve daha verimli olacaktır. Salması olmadığından çok daha sığ sularda bile (50 cm) kullanılabilir. Ruhsat için yapım aşamasındaki fotoğrafları ve malzemelerin faturasıyla imal ettiğin yerdeki liman başkanlığına başvurman gerekiyor.
S.alykm ustam dubaların yan yüz duvarlarına (yan yüzlerine)kaç mm kontrplak kullandınız?
6 mm
Dear Sir, I am from Brasil and planing made a catamara look like yours , 6,5 meters x 4 mts , each hull 0,6 meters could you send details for your construction. I will be very glad because I have some ideas but nom experience. Thanks
Salim dana, oglum he won't reply to you since he can't understand english! But I'll pass it by him🙂👍
@@bizim_eller Thanks a lot.
Hi. sorry for my late reply. length 4.60, width 2.10, height of feet 0.60 meters. You can make the upper part as you wish. With canim or open.
@@ozgurgursu8093 Thanks for your reply.. I need the wood thickness of the structure of each hull and wood plate thickness for lateral coveriside hull. I need the resin used and layers of fiberglass used and gramature of fiberglaas fabric. Thanks in advance ( sorry of my poor english )
@@salimdana124 the width of the trunks is 55 cm. Sides covered with 6 mm marine plywood. 200 grams of fiber and epoxy resin were applied on them twice. Sanding was done between each coat, then epoxy putty was applied. ready to paint now. I did the primer paint. I am now building the platform and cabin.
Fotoğraf taki usta Daimi abi değil mi tanıyorum kendisini çok değerli bir insandır daimi ustayla nasıl iletişim kurabilirim yardımcı olursanız sevinirim
İstanbul'dan tanıyorum lütfen aynı firmada beraber çalıştık
Cocok buat bagang
Kendi yaptığın bir teknenin belgelerini nasıl kayıt ettirebilirsin?
Muito bom ótimo 😊😊😊😊😊
👍👍👍👍👏👏👏👏👏👏