I screwed up with the brown vertical peg at the end of bag #2. I put the grey tubing in the cross side and not the circular side. This caused the steering wheel gear to not turn,locking it up. Pay attention to that part on this build!
when i was building this the brown thing used to turn the wheels was just still and wouldn’t move idk how to fix it too can someone tell me the problem?
That's pretty hard to say, probably you've done a mistake during building the directions. Can't say exactly, but if you want to fix it, you have to disassemble some parts and to find deeper where is the mistake...
Hey i just got the same problem with you and i found that i placed the grey piece the wrong way. The piece that the brown stick goes through. You should put it through the side that is round not the cross piece . Hope this helped ❤️
@@nxghtmare_1298thanks for telling me but i am so far away from that now so i wont be fixing it sadly😢 but really thanks i will be putting it on display anyway🙏
Quick question. I got a problem at the door underneat 1 blue can not go further and its stuck a bit more outside then rhe other one i did everything on that redo and still it sticks out of it any fixable ??
You have to hold it in the same position like me, to install the gears in the same way like me, and then add it to the frame carefully exactly like me and everything will be alright 👍 🙂
At 13.00 I got the long red piece to fit but when I went to connect the right angled piece to it its like the gap between the 2 bottom pins and the top pins are too long and I can’t push it down enough to connect straight
That's because you've made a mistake to the frame part, over there where you are connecting the red piece to the frame, but if you want me to help you with that you can take some pics and send them to my Instagram or Facebook and I will look closely to your problem.
I screwed up with the brown vertical peg at the end of bag #2. I put the grey tubing in the cross side and not the circular side. This caused the steering wheel gear to not turn,locking it up. Pay attention to that part on this build!
Thanks for the tip 👍
Thank you! You saved me! It was in step 69.
Awesome! Thanks for feedback 👍 😀
Okay.
1. I want this.
2. I Want this
3. I want this.
Nice one! It was pretty cool! 😋
I have that LEGO set, and I love the car. Awesome build
Totally agree with you 👍
I did this one too and it came out PERFECT
Great! 😘
when i was building this the brown thing used to turn the wheels was just still and wouldn’t move idk how to fix it too can someone tell me the problem?
That's pretty hard to say, probably you've done a mistake during building the directions. Can't say exactly, but if you want to fix it, you have to disassemble some parts and to find deeper where is the mistake...
Hey i just got the same problem with you and i found that i placed the grey piece the wrong way. The piece that the brown stick goes through. You should put it through the side that is round not the cross piece . Hope this helped ❤️
@@nxghtmare_1298thanks for telling me but i am so far away from that now so i wont be fixing it sadly😢 but really thanks i will be putting it on display anyway🙏
@@nxghtmare_1298btw which grey piece?
@@nxghtmare_1298oh i just fixed it tysm i hope there is more people lice you bro stay blessed🙏✝️
At 11:45 the pieces are very separated. As if the red rod is going to long, or the white pieces are to short. Any suggestions??
Are you sure that you've chosen the right length of that long red bar?
My brother lost a peice to this set and i cant finish it without it
Wow, what pice you can't find?
@@TopBrickBuilder At 9:26 the 4th Lego part my brother lost.
You can ask it at your local LEGO store 🤗
at the 8:55 mark how did you get them to fit together so perfectly, im stuck there
Try to change the Playback Speed in your youtube settings and watch one more time carefully
@@TopBrickBuilder it still don’t fit
I figured it out, used the wrong gear piece. you most likely used the small black one rather than the smaller gray one
Glad to hear that you've figured out, good luck 👍 😉
@@imdefinitelynotmarioiamthe8357 check page 30 step 47. I had that T peice in the wrong place maybe that was it.
This was oh wait- who wakes up at 3 am-
In US many people wakes at this time in Romania 😂
😂
I could not put 1 of the connectors
Which one? At what moment in the video?
What were the other two cars you showed at the end?
That was Bugatti Bolide and McLaren Senna, you can see them on my channel
Quick question.
I got a problem at the door underneat 1 blue can not go further and its stuck a bit more outside then rhe other one i did everything on that redo and still it sticks out of it any fixable ??
Can you write me the moment in video, or the step or page in instructions, to know for sure what problem do you have
@@TopBrickBuilderat 15:29 thoze 2 blue the bottom on the left sticks out.. the part before is placed correctely but still it sticks oout
Sticks out only if you are not inserting it all the way to the limit, try to push the top of blue pun and try it one more time
Suggestion- can you do a build of LEGO Technic 42158 mars rover perseverance for your next video
Thanks for suggestion! Right now I'm recording it, I'm about to start second package.
Can someone help me when 11:05, my wheel wont turn since something is locked
Seems like you've made a mistake, start checking this part starting from here 10:31
Did you find a solution?
@@WhcYunusyeah, thanks to the creator of this video haha
@SwaggySquirtleRoblox Thank you bro 🙏 😍
At 6:31 I couldn’t get the peach things in without it falling out , I gave up then haven’t touched it in months…
You have to hold it in the same position like me, to install the gears in the same way like me, and then add it to the frame carefully exactly like me and everything will be alright 👍 🙂
At 13.00 I got the long red piece to fit but when I went to connect the right angled piece to it its like the gap between the 2 bottom pins and the top pins are too long and I can’t push it down enough to connect straight
That's because you've made a mistake to the frame part, over there where you are connecting the red piece to the frame, but if you want me to help you with that you can take some pics and send them to my Instagram or Facebook and I will look closely to your problem.
Question is it hard to bud or easy?
Can't say that it's hard, you will handle it! I am here to help
Could a Captain America Minifigure fit in the cockpit? Or would it look too small?
Yeah, it's too small for this set
11:02 It won't turn even though I did everything right
You can't make it right and to not turn, please describe in details what isn't turning? The front wheels?
i’m at 10:49 and u have looked everywhere and don’t seem to have those red rods i need. what do i do?
Then you have to ask them from your local LEGO Store
@@TopBrickBuilderi realized i used the wrong piece in the wrong spot, had to restart a big chunk of the car but now i’m almost done
I see, it happens sometimes 🤣 Glad that you have figured out 👋
I keep moving the wheel thing and the egg looking thing keeps popping from its place
At what moment in video? To understand better your problem
omg hey top brick builder remember me?
Yes sure Ayman! Hello!
You can build the hogwarts castle?
You mean the 71043?
@@TopBrickBuilder yes
Oh, it's too expensive and I can't afford it right now...