@@adilsheikh3480 oh yeah a 7 inch would be no problem. This monitor is good, but basic...The controls are quite hard to operate in a rush, but it has a very nice image and yes it works well during sun light. It comes with a hood for very sunny days too!
That Rode wireless mic cord looks a lil tight for pan & tilt with the gimbal. Doesn't cause jerky movements when using the gimbal?? I know how easy it is to destabilize these gimbals. Especially with retractile coil cords like the Rode mic uses.
Yes you are right but, I havent had a problem to be honest, if I have a microphone on, I'm usually pointing forward towards a subject. If I was doing a lot of constant panning it would be a bit of struggle. The weebill S is quite a strong gimbal so it takes a lot to de-stabilise it. This may differ for other gimbals.
I use a 5 inch and it works pretty well. I have seen people use larger monitors and honestly it'll just be adding an inch to the right side because the hole is in the middle so i think so yeah. I have also used mine with a larger battery and the joint is very strong
yeahh mine didn't come with the "provided rosette mount adapter" :( how can they claim it is compatible with the DJI gimbals if it doesn't even mention it requires an adapter that isn't included. Even the amazon product page doesn't mention the adapter on the "package contents"
I have this gimbal and for Christmas I'm getting a freeworld Fw759 - 7 inch monitor. But as far as I could see the screw to mount it is on the bottom. Is there a way to mount it on this mount? Because I don't know if you can turn the screen upside down. I don't think I would be able to use the sunblock thing that clicks on to it then (because upside down). Any tips because I'm starting to think I made a bad decision with this monitor.....
Hey! Yeah you can actually flip it so you have the monitor upwards so you can screw it from the bottom no problem. Most monitors have the ability to flip the screen though, but I do see the issue with the sun hood. Either way you can definitely use the monitor mount with the screw on the bottom
strength setting on medium but I have customised my advanced settings. i have a video on how to customise my weebill S settings fully called "Best settings for the smoothest footage"
yo no puedo usar mi monitor externo junto a mi webbil s ... aparece una pantalla negra en el monitor y solo si desconecto el webils desde el usb la imagen aparece bien en el monitor... tu haz podido arreglar esto ? uso una zve 10 y fellword f6 plus
@@camicees Thanks! I think I’m going to go with a 5.5” port keys monitor instead because it’s touch screen, but I just bought the rig mount. Thanks so much
Hi i hope you can help me with this one, i will get this handle for horizontal mount but i also want a solution to mount my Ninja V vertically, is there any idea for that ? The ideal solution will be an arm that can do both obviously but at this point if i have to get two different arms then so be it. Thanks in advance.
Not sure if you will be able to answer this, but I bought a Feelworld Monitor for my Sony A6400, and have a Weebil S. As soon as I press the record button, the image on the monitor goes BLACK. I am shooting in 1080 not 4k. The only way I can get it to work is if I disconnect the other small cable from the gimbal to the sony. But doing so, I lose the ability to adjust settings on the weebil s or press the record button. Any ideas? Thanks man
Best review I’ve seen on this product. Thanks!
Glad it was helpful!
It's true, it's super light and very practical
Absolutely!
@@camicees will 7 inch monitor be fine with this? Also how is this monitor? Is it good in bright sun light?
@@adilsheikh3480 oh yeah a 7 inch would be no problem. This monitor is good, but basic...The controls are quite hard to operate in a rush, but it has a very nice image and yes it works well during sun light. It comes with a hood for very sunny days too!
@@camicees thanjs bro.. Will this rig also support rode mic?
I need a light set up which holds monitor and mic together on wibell s
@@adilsheikh3480 Yup 100% you can out it above the monitor
Just order it, Thanks.
Awesome!
Great video it was very informative.
Thanks!
Thanks dude!
No worries ! Thanks for commenting :D
great!
Cheers
justo lo que buscaba
De nada tio
That Rode wireless mic cord looks a lil tight for pan & tilt with the gimbal. Doesn't cause jerky movements when using the gimbal?? I know how easy it is to destabilize these gimbals. Especially with retractile coil cords like the Rode mic uses.
Yes you are right but, I havent had a problem to be honest, if I have a microphone on, I'm usually pointing forward towards a subject. If I was doing a lot of constant panning it would be a bit of struggle. The weebill S is quite a strong gimbal so it takes a lot to de-stabilise it. This may differ for other gimbals.
@@camicees ty for the quick response. I also have the Weebill s, so I am familiar with some of the limitations..... Nice video btw!!
@@lifeasakingstonlaak8843 Thanks a lot !
Wow great video dude. Do you know I'd be able to mount a 7inch monitor that has a large NP central battery sticking out.
I use a 5 inch and it works pretty well. I have seen people use larger monitors and honestly it'll just be adding an inch to the right side because the hole is in the middle so i think so yeah. I have also used mine with a larger battery and the joint is very strong
@@camicees thank you. I just ordered one from the link you provided will see how it goes.
@@ramymelhem does it fit well with a 7 inch? i dont mind if its close to hitting the gimble as long as i can use the motor stick
@@dylnw I ordered the adapter that Camillo recommended but the 7 inch still gives me a hard time. It works but its such a hassle.
yeahh mine didn't come with the "provided rosette mount adapter" :( how can they claim it is compatible with the DJI gimbals if it doesn't even mention it requires an adapter that isn't included. Even the amazon product page doesn't mention the adapter on the "package contents"
I have this gimbal and for Christmas I'm getting a freeworld Fw759 - 7 inch monitor. But as far as I could see the screw to mount it is on the bottom. Is there a way to mount it on this mount? Because I don't know if you can turn the screen upside down. I don't think I would be able to use the sunblock thing that clicks on to it then (because upside down). Any tips because I'm starting to think I made a bad decision with this monitor.....
Hey! Yeah you can actually flip it so you have the monitor upwards so you can screw it from the bottom no problem. Most monitors have the ability to flip the screen though, but I do see the issue with the sun hood. Either way you can definitely use the monitor mount with the screw on the bottom
Great item and review, thank you . Is it can work wit weebill s and 7” monitor?
We can't do 360 mode rotation because of the monitor cable right?
Hi, do you know if this mount is compatible with Zhiyun Weebill 2? I want to attach a F6 feelworld monitor. Thanks!
the weebill 2 doesnt have a rosette mount from what I've seen. so i dont think so
How is the performance
Its really good! Light, compact and does what I need it to be without making my life difficult!
What motor settings did you have your gimbal with that monitor ? I bought both buy my gimbal vibrates too much
strength setting on medium but I have customised my advanced settings. i have a video on how to customise my weebill S settings fully called "Best settings for the smoothest footage"
What kind of accent do you have? It sounds somewhere between usa and london..
I was born in Colombia and now live in the UK London. So it’s a weird mix and I can’t define it myself hahah
It was so sunny outside I couldn't see my camera monitor. What's the best monitor for a really sunny day?
Even with a sun hood? Not sure tbh I’d just find one with a brightness of 500+ nits
yo no puedo usar mi monitor externo junto a mi webbil s ... aparece una pantalla negra en el monitor y solo si desconecto el webils desde el usb la imagen aparece bien en el monitor... tu haz podido arreglar esto ? uso una zve 10 y fellword f6 plus
Tengo el mismo problema, encontraste una solucion ??
What type of monitor is that
Feelworld MA5 - link in description for more info
How do you like the monitor itself? I was looking at picking that one up
It’s decent but nothing special! It’s pretty durable although I dropped something on it and my screen a small liquid leak
@@camicees I'm looking to pick one up but want something easy to use, user friendly buttons etc
@@StreetOfficialMedia check out my camera bag video which shows it in more detail
@@camicees is the monitor a touchscreen?
@@StreetOfficialMedia Nope. Actually the buttons can sometimes be cumbersome
How's your Weebil S sir, did it last longer than 3 year?
Actually still use it sometimes if I need a small gimbal
Can you go into underslung mode with the monitor?
Of course! I use it in underslung mode mostly. It tilts 180 degrees
@@camicees Thanks! I think I’m going to go with a 5.5” port keys monitor instead because it’s touch screen, but I just bought the rig mount. Thanks so much
@@WickedO1 Nice one Obi! great choice for monitor ;)
Hi i hope you can help me with this one, i will get this handle for horizontal mount but i also want a solution to mount my Ninja V vertically, is there any idea for that ? The ideal solution will be an arm that can do both obviously but at this point if i have to get two different arms then so be it. Thanks in advance.
Brotha how are you connecting the monitor to the rig? Thanks
Hey! I use a hdmi micro to HDMI input on the monitor. Then I tie the cable around the monitor mount
does it work with a WEEBILL 3 ?
Not sure if you will be able to answer this, but I bought a Feelworld Monitor for my Sony A6400, and have a Weebil S. As soon as I press the record button, the image on the monitor goes BLACK. I am shooting in 1080 not 4k. The only way I can get it to work is if I disconnect the other small cable from the gimbal to the sony. But doing so, I lose the ability to adjust settings on the weebil s or press the record button. Any ideas? Thanks man
Try disabling remove control access. Or play around with HDMI settings. Maye that will work!
I have the exact same problem and can’t seem to find an answer for it? Anyone?
@@camicees wasn’t really helpful with that answer
Turn off proxy
@@replikajokes it doenst work ..... some one can fix this ... i use a ZVE 10 .. feelword f6 plus and webiil s
What if the monitor is on top and you accidentally go into selfie mode? Won't it collide?
potentially, Havent had that happen!
I shoot in vertical mode with an L brcket, does this mount allow the monitor to mount in vertical?
same question.. Have you tried it ? Thanks
@@houssamadib4723 yes... monitors often have the ability to mount on all four sides