Is it possible to tell George/Petrovich to prioritize targets? Sometimes I want them to look for AAA's first, but they keep going for some trucks or infantries when dozens of targets are available.
the biggest problem no one on youtube or the forum touches upon, is that the first laser detent doesn't work for guidance, you need to map the lase key to the second laser detent then hold it for the missile to track.
@@cagneybillingsley2165 Pretty sure Wags goes over this across multiple videos. Might need to re-watch his video on Hellfires when he talks about LOAL and LOBL modes.
@@nymerie for george im almost certain he already focuses on the biggest threat. When i have a group of armor ahead and a single aaa or sa15 somewhere in said group george always goes for the airdefense assets first. Dont know if he makes diffrences between diffrent units but the types seem consistent.
They do have similar accents, tone, cadence and delivery. If we should face a world ending disaster it would be good to have Manley/Maverick to make that final broadcast. "Well that's it ladies and gentlemen, go make a cup of tea, be with your loved ones the end is here good bye and god bless." Calm and reassuring prior to oblivion.
I have a quality of life tip that no one seems to talk about yet. After you've gone through the process of having George find targets, after you fire on one, you don't have to look for them again. If you press and hold interface down (unslave) for 1 second then release, George will automatically look at the previous area and bring up the target list again. Allows you to acquire targets in the area and fire with ease. 😁
This was exactly what I was looking for. As others have said, you explained exactly what needs to be done in a clear and concise way. Well done. You have a new subscriber. Looking forward to mre DCS Apache content from you.
Enjoyed this video. Very clear instructions. I can highly recommend it as a tutorial. I look forward to trying this out especially as I am one of the idiots from the title. Thanks Maverick.
Concise tutorial, thanks. How you kept the Apache at a stable hover state is quite intriguing to me. I will be all over the place if it was me. My warthog stick is not corporating with me flying the Apache. I have reduced the X saturation and played with curvature and still a challenge.
It's important to note "YOU" as the pilot can also fire the Hellfire. From the point in which you have George lock on and select a target you then must WAS up the Hellfire yourself after that everything else is the same only you press and hold gun trigger second detent instead of consent to fire. You have him find a 2nd target after lock on you must was up the missle again. This is the method I use. I enjoy much ripping them off the rails my self lol.
One of the better videos I've seen! Some of the other videos I've watched assumes that I've been to the US Army Helicopter School in Alabama. This video is actually made for gamers!
For me, hovering this thing is a TOTAL pain in the ass. I have no issues with any other heli in game but this thing is a flat bitch. SOOOOOO wish we had an auto hover with all the shit you have to do to fire a weapon
Well done my friend your Video cleared up some things I was doing wrong tried it out this evening and hay presto got my first few kills thanks mav see you in the skies. Shack them up !!
Maverick, great vid…really like the way you explain the process so there is are questions…now please do it for Apache everything! (If you have the time…Thx!)
Hey brother sorry for the delay in getting back to you. Collective - No Curve, no deadzone Cyclic Pitch - Curve 10 - Deadzone 3 Cyclic Roll - Curve 10 - Deadzone 1 Rudder - Curve 10 - Deadzone 3 I dont change / use any saturation on any of the axis.
Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.
30 (yes thats thirty) curves on anti-torque pedals (same as Casmo) and 20 curves for roll on the cyclic. Yes, as a long term heli flyer in DCS, I've never had to put so much into curves before but with these settings I'm nice and smooth.
@@veteran35th I get the feeling. At this point, the KA-50 is way controllable to me. I wonder if the Apache really has the SCAS system working. For the me the damping effect is weak. Or perhaps it is my control stick.
You're zooming up and zooming back is very smooth in your transitions seeming to stop wherever you want, can I ask how you have that bound and how are you are using it? Basically your user interface action for the zooming.
At first he's in Active Pause mode. When he unpauses he uses Transition mode to view his accelration cue (little circle) and light movements on his joystick to keep the ball centered.
Good video, but the problem with george isn't simple training scenarios like this. It's in more "real world" scenarios where his lack of IFF and vague target descriptions becomes a big problem. He also always seems to use FLIR, which can make daytime VID pretty difficult. Obviously it's the first week of EA and it's being iterated, but just saying. Try this with one of the Rotor Ops scenarios and you'll see what I mean.
When you say to look at the flir to check your target and you can see an enemy tank. I literally could not see anything and I can never see anything when I'm in the apache either. I've always had trouble finding targets in a tpod like screen. Frustrates me no end.
How do you hover so beautifully? 'cause as far as i know, there is no autohover mod... Even when trimed, i have constante mouvments and/or altitude changing... (sorry for my bad english)
It’s in the mission editor under the advanced waypoint actions section. It’s the last tab on the right hand side, you need to untick the box labelled FCR Remove
Hi there, I have a small problem, I don't get that dotted cross over the targets George is locked on to, I can see it on the MFD what target he is locked onto and lasing but not on the IHADSS. The dotted cross is inside that rectangular dotted box that is just over the cross at 3:08.
Is any one else having the bug where the apache won't pitch the rotor forward enough to even taxi forward no matter how far the cyclic is pushed forwards??
@@rob7566 Never had that issue. You might want to have the control indicator up and check if cyclic control is well centred. If I understand this correctly, looks like the newly introduced white box on the control indicator indicates the limit of the SCAS system and beyond a certain point it the stick will not move further.
@@ernestwinslow7316 scar? Is that the small Gray/white boxes around the control indicators that themselves have green indicators inside them? And if so how can I get rid of them? Btw thanks for the helpful comment 👍
@@rob7566 I am afraid this is hardcored and cannot be removed. Just by the chance, before taxing, is your parking brake level released? Normally if you increase collective to about 30%, have the parking brake released(pushed inside), move the cyclic forward, the Apache would taxi or move forward. Also check from the control indicator display that all axis are centered. I hope these help.
Can someone help me as when George has a target locked up I can see it on the tads but my + is stowed in the little box on the hud so I can’t see where the target is
@@620crazyman Targeting is fine. I just can't get the cross on the IHADSS to move over the target. I've only done cold starts so far, so I wonder if I'm missing a step?
Yes you can. WAS the Hellfires and you're good to go (tested with a human CPG who was unable to see that we had Hellfires equipped, so I did the trigger pulling). Don't forget that trigger protection though!
Does not work for me. George find target but he dont lock on him. Also target list on left is in red colour and i dont know why. Your target list is in white.
@@104thMaverick i got him to work now (range wasnt the problem anyways) ONLY that this problem still exists, no matter what range, after i've reload my set of Hellfires without Turning the Heli off...🤔 which is a bit weird but fine by me
Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.
Good job, better than mine.
Is it possible to tell George/Petrovich to prioritize targets? Sometimes I want them to look for AAA's first, but they keep going for some trucks or infantries when dozens of targets are available.
the biggest problem no one on youtube or the forum touches upon, is that the first laser detent doesn't work for guidance, you need to map the lase key to the second laser detent then hold it for the missile to track.
@@cagneybillingsley2165 Pretty sure Wags goes over this across multiple videos. Might need to re-watch his video on Hellfires when he talks about LOAL and LOBL modes.
@@cagneybillingsley2165 If George is lasing it doesn't matter how you have the laser mapped.
@@nymerie for george im almost certain he already focuses on the biggest threat.
When i have a group of armor ahead and a single aaa or sa15 somewhere in said group george always goes for the airdefense assets first.
Dont know if he makes diffrences between diffrent units but the types seem consistent.
I LOVED the “I’m not Scott Manley, fly safe!” Hahaha, well done!
They do have similar accents, tone, cadence and delivery. If we should face a world ending disaster it would be good to have Manley/Maverick to make that final broadcast. "Well that's it ladies and gentlemen, go make a cup of tea, be with your loved ones the end is here good bye and god bless." Calm and reassuring prior to oblivion.
After you destroy your first target, press long back on the George AI Helper and George will automatically re-search the same area.
I was wondering about having him rescanning
I have a quality of life tip that no one seems to talk about yet. After you've gone through the process of having George find targets, after you fire on one, you don't have to look for them again. If you press and hold interface down (unslave) for 1 second then release, George will automatically look at the previous area and bring up the target list again. Allows you to acquire targets in the area and fire with ease. 😁
Omg, how did I miss this, trying it tomorrow 👍
Thanks - so much simpler to understand than the overload official tutorials. And you didn't refer to a load of acronyms which is confusing for noobs.
5:22 To select another target use long press down and the list of targets will show again.
Thanks Miller, great tip
Nice one Miller, that speeds things up heaps!👍
I’m an AH-64D aviator, so if there’s any questions feel free to ask.
FIRST! - As an idiot myself, I find these guides quite helpful 😁
That hover though
fr im at a lose for words
Was thinking the same, Rock Steady Eddie. At first, I actually thought he was on the deck until I noticed his Alt readout.
Thanks a lot. Never understood the VID setup. Your video is the best I have seen for explaining this.
Glad it helped, thanks for watching
IF You up long for George he will turn green and he will engage all the targets one after another. Also down long will bring the list back up again.
GOLD! THANK YOU
So much to learn and without brilliant videos like this, I would be pulling my hair out.
Brilliant matey - thank you!
This was exactly what I was looking for. As others have said, you explained exactly what needs to be done in a clear and concise way. Well done. You have a new subscriber. Looking forward to mre DCS Apache content from you.
This is what I need. Not some in depth analysis on every system - give me the basics and Ill dig into the systems when I'm ready
I was looking for this exact video for a while! Great tuto thanks 👍
Enjoyed this video. Very clear instructions. I can highly recommend it as a tutorial. I look forward to trying this out especially as I am one of the idiots from the title. Thanks Maverick.
Concise tutorial, thanks. How you kept the Apache at a stable hover state is quite intriguing to me. I will be all over the place if it was me. My warthog stick is not corporating with me flying the Apache. I have reduced the X saturation and played with curvature and still a challenge.
Straight to the point with no BS. I like it. thank you.
Great video. Simplifies what seems a complicated procedure. More of the same please. Thank you.
Cheers mate
Great vid, nice and steady there Mav. Impressive.
It's important to note "YOU" as the pilot can also fire the Hellfire. From the point in which you have George lock on and select a target you then must WAS up the Hellfire yourself after that everything else is the same only you press and hold gun trigger second detent instead of consent to fire. You have him find a 2nd target after lock on you must was up the missle again. This is the method I use. I enjoy much ripping them off the rails my self lol.
One of the better videos I've seen! Some of the other videos I've watched assumes that I've been to the US Army Helicopter School in Alabama. This video is actually made for gamers!
Not scott manley cracked my up haha, you do sound similer. You sound identical to scottish koala though
I'm not Scott Manley 🤣
For me, hovering this thing is a TOTAL pain in the ass. I have no issues with any other heli in game but this thing is a flat bitch. SOOOOOO wish we had an auto hover with all the shit you have to do to fire a weapon
This video is the BEST ACACHE VIDEO EVER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Well done my friend your Video cleared up some things I was doing wrong tried it out this evening and hay presto got my first few kills thanks mav see you in the skies. Shack them up !!
This was so HELPFUL!!!!!!! Thank you Maverick!!!!
Maverick, great vid…really like the way you explain the process so there is are questions…now please do it for Apache everything! (If you have the time…Thx!)
Suppose to say “no questions”…my bad…sorry!
I've been struggling. You've just helped me a lot. Thank you.
Happy to help!
Appreciate the succinct summary of how this works! No offence to Wags and Casmo but this is a great explanation for those of us with ADHD.
And now I'm putting missiles down range and hitting targets... well George is doing most of the work. Thank you again sir!!! 👏
Fantastic!!
Please can you do a similar video for the cannon operation?
Thanks, very helpful. Got rid of a few confusions I had 🤣
Glad it helped!
Great video Mav. Would you consider sharing your axis setup? Curves and/or Saturation settings? I'm using a Warthog (no extension)
Hey brother sorry for the delay in getting back to you.
Collective - No Curve, no deadzone
Cyclic Pitch - Curve 10 - Deadzone 3
Cyclic Roll - Curve 10 - Deadzone 1
Rudder - Curve 10 - Deadzone 3
I dont change / use any saturation on any of the axis.
just what was needed... nice one!!
You’re welcome mate
Ah yes, I'm the idiot this is aimed for :D
I believe in you!
Shiftie had to help me as I had ACQ on fxd oops!
Very nice video Mav, thanks
Spot ON!! Cheers
If you want George to "rescan" the original scan, hold down "S" = George AI Helper down. Saves having to reticule and pressing "W" repeatedly.
Man is hovering at 69%. Nice.
Top gun and volley ball, I'm not Scott Manley. Fly safe 🤣🤣🤣 freaking dead!
Great vid Mav (as usual) 👌
Appreciate it, thanks man
Thanks This was so HELPFUL!!!!!!! Very good Tutorial
Brilliant. This is worth a like an sub.
Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.
The active pause function. Can use it with any module to get airborne and play with systems
Great vid. How did you keep such a stable hover?
I've been flying Heli sims for years brother so I have a lot of practice in them.
Best and easiest guide yet!
Glad it helped!
Thanks for putting this together. Well done as usual.
This is great, thank you!
Nice sign off too btw, knew I recognized your voice from somewhere 😂❤
You're very welcome!
What I’m really interested into is how do you manage to settle such stationary flight ? 😱
Using FTR mine is always too much or too little 😰
@Eric Mollenthiel I find Lwin+Pause helps a lot in SP to learn the ropes ;)
OK, with a little bit of practice I'm starting to get the hang of it. 😇
30 (yes thats thirty) curves on anti-torque pedals (same as Casmo) and 20 curves for roll on the cyclic. Yes, as a long term heli flyer in DCS, I've never had to put so much into curves before but with these settings I'm nice and smooth.
@@veteran35th I get the feeling. At this point, the KA-50 is way controllable to me. I wonder if the Apache really has the SCAS system working. For the me the damping effect is weak. Or perhaps it is my control stick.
Niceley done mate! S!
Lots of help Thanks
You’re welcome
MAVERICK! good video
What device do you use for your anti-torque? its so damn smooth
I use the twist on my Virpil Constellation Alpha stick brother
@@104thMaverick I am guessing twisting and trimming at the same time would be a challenge if you have trimming on the stick too.
You're zooming up and zooming back is very smooth in your transitions seeming to stop wherever you want, can I ask how you have that bound and how are you are using it? Basically your user interface action for the zooming.
I have "Zoom In Slow" and "Zoom Out Slow" bound to two way switch on my throttle
@@104thMaverick wonderful I'll look into that option.
Really helped me. Thank you.
You're welcome!
Nice clear explanation, do you have one covering use of Hellfires when playing in CP/G role, (with George ai as pilot)?
Not tried it yet my friend but once I get round to it, I'll knock something out
Fantastic Bro! S!
One question I had was how are you are hovering so steady if you're the pilot whilst doing this? You seem to be hovering like a pro.
At first he's in Active Pause mode. When he unpauses he uses Transition mode to view his accelration cue (little circle) and light movements on his joystick to keep the ball centered.
I am a Pro brother 😝😎
Nice and easy…is it possible to change the CPG sensor from FLIR to TV from the pilot location?
I’m not sure Jay sorry
Really helpful, can you make another exactly like this again but for LOAL with George firing please.
Thank you very much for your video!
You are welcome!
Thank you very much.
thanks you, very useful ! Well Done 👍. As always 🤩
Thank you! Cheers!
Very helpful! Thanks.
You're welcome!
Is it possible to fire rockets or shoot the guns.. without George.. just staying on the ground, not even turning on the propeller?
Sureeee Scott Manley
Nice Video
Cheers Andy
Good video, but the problem with george isn't simple training scenarios like this. It's in more "real world" scenarios where his lack of IFF and vague target descriptions becomes a big problem. He also always seems to use FLIR, which can make daytime VID pretty difficult. Obviously it's the first week of EA and it's being iterated, but just saying. Try this with one of the Rotor Ops scenarios and you'll see what I mean.
Very helpful , thanks
Glad to hear that!
When you say to look at the flir to check your target and you can see an enemy tank. I literally could not see anything and I can never see anything when I'm in the apache either. I've always had trouble finding targets in a tpod like screen. Frustrates me no end.
Great explanation! Can George be used as the CPG in multiplayer?
Yes my friend
@@104thMaverick Your instructions were so spot on my slow ass was successful. Thanks man!
How are you in such a rock solid hover?
Practice and fine adjustments brother
@@104thMaverick Fucking professional
@@104thMaverick just ordered me some MFG crosswinds cause my old crappy pedals wasn’t doing the job. Getting better.
How do you hover so beautifully? 'cause as far as i know, there is no autohover mod... Even when trimed, i have constante mouvments and/or altitude changing... (sorry for my bad english)
I’m a trained desktop professional my friend 😎😝
Pls make more AH64 tutorial
I'm not getting a large square :( hellfires not tracking...weird)
I have a question.
How do you choose the longbow version with the radar above the rotor???
It’s in the mission editor under the advanced waypoint actions section. It’s the last tab on the right hand side, you need to untick the box labelled FCR Remove
Thanks a lot! 👍
Hi there, I have a small problem, I don't get that dotted cross over the targets George is locked on to, I can see it on the MFD what target he is locked onto and lasing but not on the IHADSS. The dotted cross is inside that rectangular dotted box that is just over the cross at 3:08.
Go to the WEAPONS page and in the bottom right select your ACQ (Acquisition source) to TADS
@@104thMaverick Nice, thank you :)
You’re very welcome sir
How did u remove eye sight border circle
You need to do all the training videos for ED. You don’t talk too fast, explain it well, talk plain. Thanks
thank you very much.!!!!
You're welcome!
What about LOAL mode?
Is any one else having the bug where the apache won't pitch the rotor forward enough to even taxi forward no matter how far the cyclic is pushed forwards??
No brother, not seen that.
@@104thMaverick great it works fine in the training missions just not in the instant action or missions
@@rob7566 Never had that issue. You might want to have the control indicator up and check if cyclic control is well centred. If I understand this correctly, looks like the newly introduced white box on the control indicator indicates the limit of the SCAS system and beyond a certain point it the stick will not move further.
@@ernestwinslow7316 scar? Is that the small Gray/white boxes around the control indicators that themselves have green indicators inside them? And if so how can I get rid of them? Btw thanks for the helpful comment 👍
@@rob7566 I am afraid this is hardcored and cannot be removed. Just by the chance, before taxing, is your parking brake level released? Normally if you increase collective to about 30%, have the parking brake released(pushed inside), move the cyclic forward, the Apache would taxi or move forward. Also check from the control indicator display that all axis are centered. I hope these help.
Can someone help me as when George has a target locked up I can see it on the tads but my + is stowed in the little box on the hud so I can’t see where the target is
Go to the Weapons Page and make sure TADS is select at the Acquisition Source. Check bottom right where it says ACQ, click that and select TADS
@@104thMaverick thanks mate. Got it.
I am having trouble getting the CPG sight to overlay the target in the IHADSS. It just sits in the diamond and never moves. Anyone got any advice?
If you're trying to get Geroge to target something the George AI Helper panel must be open the entire time for weapon employment
@@620crazyman Targeting is fine. I just can't get the cross on the IHADSS to move over the target. I've only done cold starts so far, so I wonder if I'm missing a step?
@@jasons9564 Try setting your acquisition to TADS on the TSD.
@@620crazyman That was it! The acquisition source needed to be set to SKR. No more fratricide for me! Thanks dude!
Thanks. Idiot question: can we fire from the pilot position?
AFAIK no brother, boom sticks are a front seat only thing, back seat gets Rockets and Guns.
Yes you can. WAS the Hellfires and you're good to go (tested with a human CPG who was unable to see that we had Hellfires equipped, so I did the trigger pulling).
Don't forget that trigger protection though!
@@104thMaverick You can with a human CPG. If you WAS the Hellfires it should let you fire them. Don't forget your trigger guard though.
Does not work for me. George find target but he dont lock on him. Also target list on left is in red colour and i dont know why. Your target list is in white.
When it’s red that means that George has identified the target as hostile
@@104thMaverick Hmm. Static apc as hostile.Btw nice tutorial.
Are you tactical pascals in disguise?
Ha no! We both come from roughly the same area in Scotland tho
im not Scott Manley is legandary :D
The George interface vehicle list is not very intuitive in VR. The list is too far down.
George dosn't want to fire when i press the consent button :(
You’re probably too far away for George to fire mate, make sure you are within 8000 meters of
@@104thMaverick i got him to work now (range wasnt the problem anyways) ONLY that this problem still exists, no matter what range, after i've reload my set of Hellfires without Turning the Heli off...🤔
which is a bit weird but fine by me
You. Do sound like scott
George is cool, but slow. A good real CPG can take out multiple targets with 15 seconds of each other.
☺️ ᴘʀᴏᴍᴏsᴍ
Great video Mav. Been struggling for a couple of days with this but figured it out last night. What I'd like to know is, how the hell you get that hover so steady? Would love to see a video on that. How to get from cruise into, what looked like, a parked up Apache 200ft. Rock steady. Love your content my man.
he has active pause on mate
@@kaitmmvi1744 Huuuum! I was so fascinated by that steady hover.