On my 98 obs I got my DNA Motor U bar led style head lights too “Flash” with my turn signals both U bars on the turn Lense and the headlights. But they are hyper flashing to fast with my old bulbs which is wrong . I don’t know if it’s because I have a bad oem 1157 amber bulb. But I can say In order too get the Leds too flash as a mod it does require wiring the Led wires directly too the side marker 2 wire harness which is the small 194 bulb style side markers for anyone interested
I literally showed what wires go with which , which is the most asked question, the wiring is the easiest part and if you don’t know how to wire stuff up then thats all on you 🤷🏽♂️
@@AlexReyesObs what connectors did you use? What gauge wires come with the lights? What tools did you need? Etc… don’t take offense bro it’s constructive criticism
@@AlexReyesObs yeah I did I used the slicers and idk if it’s just not getting a good connection or what but they don’t turn on I had them for about a month now lol
must be connectors , i had the same problem at first since the ones that come with the lights are cheap , try how i did it first and slice the cable and wrap it around like i did in the video then get some good quality splicers to make sure it’s safe and secure
Hey man, I have a 92 i put the housings in got them wired up but the corner light housings don't fit the pins don't line up. How'd you get them in there?
I took a box knife and cut the bottom hole towards the top hole and kept sizing as I went to get a decent fit you will need the washer that was on The old side reflector I flipped it around as the sizing is bad
Thx bro and no i did not cut anything , i just had to finesse it , headlights weren’t straight , just a bit crooked but they stayed in place when i put the screw back in place
@@AlexReyesObswith all due respect buddy I like your video and all but I agree with ol boy… there’s minimal knowledge on here, on how to actually install the headlights bro
Tap the headlight led wires into the side maker wire it’s 2 wires on each so that for the headlight led bar and for the lower turn signal housing led bar 4 wires total get tapped into the maids marker on each side of the truck . It will cause the leds to blink when the blinkers are on
And nice truck btw bro been watching you since I started working on my obs
On my 98 obs I got my DNA Motor U bar led style head lights too “Flash” with my turn signals both U bars on the turn Lense and the headlights. But they are hyper flashing to fast with my old bulbs which is wrong . I don’t know if it’s because I have a bad oem 1157 amber bulb. But I can say In order too get the Leds too flash as a mod it does require wiring the Led wires directly too the side marker 2 wire harness which is the small 194 bulb style side markers for anyone interested
You should do a video from beginning to end on how to install these… this is 10% that and 90% fitment issues/other stuff
I literally showed what wires go with which , which is the most asked question, the wiring is the easiest part and if you don’t know how to wire stuff up then thats all on you 🤷🏽♂️
@@AlexReyesObs what connectors did you use? What gauge wires come with the lights? What tools did you need? Etc… don’t take offense bro it’s constructive criticism
So when u have ur running lights on does it blink still?
Yo beautiful grill. Where can I pick one like that up?
Hey bro can you let me know what light bulbs you running? I need to get so new ones
Where did u buy those bottom led lights?
Man dude i got those head lights and I can’t get them to turn on man 😭
did you wire them correctly ?
@@AlexReyesObs yeah I did I used the slicers and idk if it’s just not getting a good connection or what but they don’t turn on I had them for about a month now lol
must be connectors , i had the same problem at first since the ones that come with the lights are cheap , try how i did it first and slice the cable and wrap it around like i did in the video then get some good quality splicers to make sure it’s safe and secure
what led lights do you have like the 9005 and the 9006 its all i need for my truck
Yo bro what lights did you use for the fog lights what are the dimensions?
Hey man, I have a 92 i put the housings in got them wired up but the corner light housings don't fit the pins don't line up. How'd you get them in there?
I took a box knife and cut the bottom hole towards the top hole and kept sizing as I went to get a decent fit you will need the washer that was on The old side reflector I flipped it around as the sizing is bad
Just a fyi the fit ment is probably cause they might be back word I’ve done that before lol
Really useful video bro but how did u end up installing the headlights for the fitment? U cut anything off??
Thx bro and no i did not cut anything , i just had to finesse it , headlights weren’t straight , just a bit crooked but they stayed in place when i put the screw back in place
Yo what wire do you tape in for negative and postive
Thank
Fit on a 1990 ? And where did you get them
What light bulbs are you running ?
Idk why when I installed the same signal lights bulbs as you did. My headlights, the line didn’t want to turn on anymore
The led strip I mean didn’t want to turn on
Hey bro how come on mine the right turn signal stays on bro
Looks clean but I might just wait till another company makes a higher quality version
The quality on aftermarket stuff is crap in general
How can you get sponsored through company’s and stuff
Email them just let them know
Erga been a min🤣
🤣🤣
Were did u buy them at
link is is description
I couldn't understand a word this thing said
cmon bro you speaking to me like you a child , man up and say with that chest , you grown just rmb that
@@AlexReyesObswith all due respect buddy I like your video and all but I agree with ol boy… there’s minimal knowledge on here, on how to actually install the headlights bro
Yeah man ! That list set is straight garbage man! Lol I got some too. Hey look good but quality sucks!
Can someone tell me if the same year gmc fit chevy stuff?
yo bro can you dm me on insta about the wiring? or can you tell me in a better way how to do it?
Tap the headlight led wires into the side maker wire it’s 2 wires on each so that for the headlight led bar and for the lower turn signal housing led bar 4 wires total get tapped into the maids marker on each side of the truck . It will cause the leds to blink when the blinkers are on
@@Chevro91 yo bro wats your ig I need help w mines 😿