dont know but now when I connect my iphone 7 through anycast it connects it as well casts my phone display too but as soon as i play a video from say amazon prime sounds are heard from the tv but no pic being shown and it says current download cannot be played through air play
ello, i purchased an Anycast dongle and it was working fine with my LG 3d LED TV till date. today i tried to upgrade it with help of my mobile hotspot and after completing 2% (as shown in TV screen) the TV screen got black. Since then, neither it shows anycast screen in TV nor its SSID is being seen in any mobile wifi. what might be the issue and how to factory reset the anycast dongle??
After upgrade, no problem with RUclips, but when i watch a video on web browser, its always crash when doing full screen.. guess the system isn’t fully stabile yet
Sorry for replying late. Would you please tell us your phone model and dongle's SSID? Is it iPhone mirroring or Android miracast crash? It's appreciated if you would share more information with us. Thanks.
Sorry. Downgrade the firmware version is not available at the moment. It's appreciated if you can tell us your bad user experience when using our product. We will try our best to help you. And it may also help us to find out the issue to improve AnyCast. Thanks.
The WiFi SSID of AnyCast (AM8252) consist by "ANYCAST" and 8 characters "########". For SSID consist less then 8 characters, it could be not able to upgrade to comply with iOS11 and iPhone 8.
*Thank you, I was finally able to update and get it to connect to an iPhone. I was always able to connect to my S7 edge. I need to buy another though and buy another wire as mine has a short in it. Please provide a link if you could so we can buy from a reputable dealer on Amazon. The person I bought from on Amazon no longer as any in stock.*
For providing you better supporting customer service, please clarify the following information for us: 1. AnyCast SSID and firmware version (right down the screen corner ver.xxxxxxxx) 2. Your phone models and OS version 3. Symptom: failed to install, fail to mirror, fail to enter the IP address, fail to connect to the Internet... Thanks for your understanding and help.
Hello sir I had everything done and the version of the phone and anycast was same but the phone started saying reboots this system I have even restarted the phone what do I do next
We appreciate if you could also schedule the update asap.. . i do not know that there is a counterfeit version of this casting device.. Actually i was planning to buy another anycast device, and ofcourse i dont want to consider other brands as much as possible, but if this counterfeit version will be an issue for the new iOS11, i guess i have no choice but to go for other brands.
AnyCast using RK2928 should be NOT real AnyCast. Please contact with seller who is selling non-real AnyCast, and ask for support. One of the solution for you is to purchase real AnyCast which is AM8252 chipset instead.
hi. please help me, After the upgrade to new version (16403000 )the airplay in my Macbook does not connect anymore to anycast and mirroing is impossible. I tried all the ways and nothing. My mac is OS 10.10 . is there any chance to downgrade the anycast, as the original version of the anycast worked good. thanks in advance I hope you can give me a solution.
Farah Aziz its the same with my experience.. does anycast not support ios 12 yet? Because i found this experience when using ios 12, before no problem et all..
I have bought an android tv now. I can’t able to screen mirror my iPhone to tv. I don’t have a home wifi connection. Can any one help me how to screen mirror these devices.
Please kindly check the video inside. This video shows how to upgrade AnyCast WiFi Display Dongle via using iPhone. Please follow below steps: (Step 1) Connect AnyCast to your TV or Monitor, and then power on. (Step 2) Connect iPhone or iPad to the WiFi of AnyCast (You may get SSID and Password of MiraScreen on screen) (Step 3) On your iPhone, Launch browser (i.e. Safari) and then then 192.168.203.1 (Step 4) On Setup page, connect AnyCast to your Home WiFi, and then refresh setup page (Step 5) On Setup page, click Upgrade to get latest version firmware from server (Step 6) Wait for upgrade, and please do NOT power AnyCast off during upgrade procedure. (Step 7) AnyCast will restart automatically. With the latest version, you may continue to mirror with iOS11 or iPhone8
Sorry, we've released new firmware to fix this issue. Now please use the temporary way to connect the dongle to your home router and upgrade the dongle to the latest version. 1. Take your Phone and switch on personal hotspot, then leave the Phone near the dongle to make sure there are two Wi-Fi signals around the dongle. 2. Use your another phone or laptop to connect to AnyCast SSID via Wi-Fi 3. Launch your phone or laptop browser and enter the IP address 192.168.203.1 4. Click "Internet" and there will show your home router and mobile hotspot 5. Click your home router to connect6. Click "Upgrade" Thanks.
I to have same problem but i have solved it follow this on hotspot in any device make sure that u should have more than one wifi so u can solve the problem like this
Sorry, the dongle you have is not our AnyCast dongle with only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is eight-digit number. And the IP address is different from our AnyCast (192.168.203.1). Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video. Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information. Thank you.
Sorry, please connect your phone to AnyCast SSID via WiFi before entering the IP address. You can also check the video inside. If it still fails, please record a short video about your issue to support@any-cast.com for our checking. Thanks.
Sorry, the dongle you have is not our AnyCast dongle with the only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is an eight-digit number. And the IP address is different from our AnyCast (192.168.203.1).Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video.Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.Thank you. If you are willing to order original AnyCast, you can refer to our authorized supplier to order the dongle: www.aliexpress.com/store/2337093
But I still can't upgrade, it says that I have had the latest verison, but my firmware version is "15474002"! I have already connected to the Internet.
Sorry for replying late. Please upgrade the dongle to the latest version. We've released new firmware to support iOS 11. The latest version is 16422000 If it still fails, please record a short video about your issue and send to support@any-cast.com for our checking. Thanks.
Sorry for replying late. Please upgrade the dongle to the latest version. We've released new firmware to support iOS 11. The latest version is 16422000 If it still fails, please record a short video about your issue and send to support@any-cast.com for our checking. Thanks.
Sorry for the inconvenience. We've fixed the issue in our new firmware. Now please use the below way to connect the dongle to your home router. 1. Take your Phone and switch on the personal hotspot, then leave the Phone near the dongle to make sure there are two Wi-Fi signals around the dongle. 2. Use your another phone or laptop to connect to AnyCast SSID via Wi-Fi 3. Launch your phone or laptop browser and enter the IP address 192.168.203.1 4. Click "Internet" and there will show your home router and mobile hotspot 5. Click your home router to connect Thanks. You are welcome to visit AnyCast website for more information. (1) User Tips, any-cast.com/pages/user-tips (2) Video Guide, any-cast.com/pages/video-guide (3) Usage Guide for iOS, Android, Mac, and Windows, any-cast.com/pages/help
Sorry, do you mind taking a photo of the dongle main screen shown on the TV for our checking? When watching RUclips, is there any reminder message popped out? Thanks.
Sorry, do you mind taking a photo of the dongle main screen shown on the TV for our checking? When watching RUclips, is there any reminder message popped out? Thanks.
Guide AnyCast There is a message that pops out in the RUclips video that says “connected to AirPlay” and then it automatically stops screening and the home page appears in my TV as well. I have checked and this does not only occur with YT videos, but with any other type of media video being displayed on my phone with ios 11
Do you mean you can't connect to AnyCast SSID or mirror to the TV? Can you provide us more information about your issue, we are happy to help you with the issue. Thanks.
my ios is 11.1.1 and anycast fireware 10.8.50 It can mirror screen to Tv monitor anytime, but when i watch a video on web browser, its always crash when doing full screen.....how can I fix this problem ....??
Sorry, the dongle you have is not our AnyCast dongle with the only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is an eight-digit number. And the IP address is different from our AnyCast (192.168.203.1). Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video. Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information. Thank you.
For providing you better supporting customer service, please clarify the following information for us: 1. AnyCast SSID and firmware version (right down the screen corner ver.xxxxxxxx) 2. Your phone models and OS version 3. Symptom: failed to install, fail to mirror, fail to enter the IP address, fail to connect to the Internet... Thanks for your understanding and help.
Announcements (1) Real AnyCast made by AM8252, could upgrade to support iOS11 and iPhone8 from today. (2) Counterfeit AnyCast made by RK3036, please wait for another TWO months for patch. (3) Counterfeit AnyCast made by RK2928, no upgrade plan to support iOS11.
Sorry, the dongle you have is not our AnyCast dongle with only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is eight-digit number. And the IP address is different from our AnyCast (192.168.203.1). Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video. Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.
Its the most ridiculous useless, thing I have ever used.It wont work on windows 10 64 bit.ezmira cant find it.The url of 192.168.203.1 cant be found.I have yet to figure out how to upgrade the stupid firmware.Finally leaving the phone out of it! .usb to the crap thing might work from the computer.I would never recommend these sodding things.
Visit EZCast RUclips channel for the latest screen mirroring technologies ruclips.net/user/ezcast
NO THANK YOU.
dont know but now when I connect my iphone 7 through anycast it connects it as well casts my phone display too but as soon as i play a video from say amazon prime sounds are heard from the tv but no pic being shown and it says current download cannot be played through air play
Mayank UP. Asbestos Ltd same here! So have u found the solution?
Stefany Shiella no solution as Apple has withdrawn support for any cast both for Netflix and Amazon prime. PS. I see youtube cast with no problems.
i upgrade my anycast after that not showing SSID and password how can i fix?
I want a way how to support samsung g7 plez
how connect anycast with internet because during its mirroring the internet stops working
ello,
i purchased an Anycast dongle and it was working fine with my LG 3d LED TV till date.
today i tried to upgrade it with help of my mobile hotspot and after completing 2% (as shown in TV screen) the TV screen got black. Since then, neither it shows anycast screen in TV nor its SSID is being seen in any mobile wifi.
what might be the issue and how to factory reset the anycast dongle??
Sorry, for the late reply. Please send email to support@any-cast.com and ask for help. Thanks.
How about ios 12?
After upgrade, no problem with RUclips, but when i watch a video on web browser, its always crash when doing full screen.. guess the system isn’t fully stabile yet
Sorry for replying late. Would you please tell us your phone model and dongle's SSID? Is it iPhone mirroring or Android miracast crash? It's appreciated if you would share more information with us.
Thanks.
I don’t like the new update is there any way to downgrade to previous version?
Sorry. Downgrade the firmware version is not available at the moment. It's appreciated if you can tell us your bad user experience when using our product. We will try our best to help you. And it may also help us to find out the issue to improve AnyCast. Thanks.
How to know which AnyCast do i have AM8252 or RK3036 or AR2928 ???Plz answer
The WiFi SSID of AnyCast (AM8252) consist by "ANYCAST" and 8 characters "########". For SSID consist less then 8 characters, it could be not able to upgrade to comply with iOS11 and iPhone 8.
Guide AnyCast Like this you mean?
AnyCast-F9D2DC
Hi you can help me i want to buy anycast but there are anycast m2 plus
& anycast Dongle ? who best!
AnyCast M2 Plus. You can order from Any-Cast.com directly.
*Thank you, I was finally able to update and get it to connect to an iPhone. I was always able to connect to my S7 edge. I need to buy another though and buy another wire as mine has a short in it. Please provide a link if you could so we can buy from a reputable dealer on Amazon. The person I bought from on Amazon no longer as any in stock.*
Sorry, we don't have sellers selling cable. We suggest ordering a new one instead.
Thanks.
Ssid show nhi kr rha h kya kre please tell me
For providing you better supporting customer service, please clarify the following information for us:
1. AnyCast SSID and firmware version (right down the screen corner ver.xxxxxxxx)
2. Your phone models and OS version
3. Symptom: failed to install, fail to mirror, fail to enter the IP address, fail to connect to the Internet...
Thanks for your understanding and help.
Hello sir I had everything done and the version of the phone and anycast was same but the phone started saying reboots this system I have even restarted the phone what do I do next
Sorry, can you please take a photo and send to support@any-Cast.com for our checking?
Thanks for your help.
Hello. The widget has been updated. But I can not connect it to the network. Please help me
Sorry, do you mean you can't go to the IP address or the Internet page loads all the time? Please share more with us so that we can help you.
Thanks.
How to do it for Anycast M2 with CPU RK2928? The IP address are different. Mine has 192.168.49.1 and has no upgrade link on the setup page.
Regarding counterfeit AnyCast made by RK2928, no schedule to upgrade for iOS11.
We appreciate if you could also schedule the update asap.. . i do not know that there is a counterfeit version of this casting device..
Actually i was planning to buy another anycast device, and ofcourse i dont want to consider other brands as much as possible, but if this counterfeit version will be an issue for the new iOS11, i guess i have no choice but to go for other brands.
AnyCast using RK2928 should be NOT real AnyCast. Please contact with seller who is selling non-real AnyCast, and ask for support. One of the solution for you is to purchase real AnyCast which is AM8252 chipset instead.
where can i purchase real AnyCast which is AM8252 chipset. Please give me direct link so that I can make purchase order. Thank you
hi. please help me, After the upgrade to new version (16403000 )the airplay in my Macbook does not connect anymore to anycast and mirroing is impossible. I tried all the ways and nothing. My mac is OS 10.10 . is there any chance to downgrade the anycast, as the original version of the anycast worked good. thanks in advance I hope you can give me a solution.
Sorry and please wait for the new firmware, Thanks.
Anycast hilang paswd ssid gimana cara balikinnya lg ni... Mhn infonya
Is air play only for iphone or it works with Android phone too.confused plz help
Yes, setup in the Airplay/DLNA mode works with Android phone too, but mirroring does not.
Thanks,
Hello
Anycast Netflix black screen error my phone Huawei P9 Lite and Mate 10 lite.
Update firmware
what about the frame rate? can it reach 60fps?
1080p fps is available.
Thanks.
1080_60fps. Thanks.
Sir I am not able to screen mirror my lyf device only from this upgrade
Can we know your phone model and AnyCast SSID, firmware version?
Thanks
Miracast mode is not functioning after firmware upgrade :(
Sir, you need to switch to Miracast mode by press the button on Dongle body.
How to remove “connected to airplay” word while playing RUclips video. It always appears all the time and I cannot watch the video clearly.
Farah Aziz its the same with my experience.. does anycast not support ios 12 yet? Because i found this experience when using ios 12, before no problem et all..
Yup, before ios 12 got no problem.
I have bought an android tv now. I can’t able to screen mirror my iPhone to tv. I don’t have a home wifi connection. Can any one help me how to screen mirror these devices.
Sorry for the late reply. Please refer to any-cast.com/user-tips.html for the user manual.
Thanks.
سامسونج g7 ما بيدعمو ليش اريد طريقة دعم البرنامج
How can i update M3 Plus with RK3036 Rockchip? IP is192.168.49.1
Regarding iOS11 support for counterfeit AnyCast made by RK3036, please wait for another TWO months.
Regarding counterfeit AnyCast made by RK3036, please wait for another TWO months for upgrade.
How to upgrade Anycast DF30EA50
Please kindly check the video inside.
This video shows how to upgrade AnyCast WiFi Display Dongle via using iPhone. Please follow below steps:
(Step 1) Connect AnyCast to your TV or Monitor, and then power on.
(Step 2) Connect iPhone or iPad to the WiFi of AnyCast (You may get SSID and Password of MiraScreen on screen)
(Step 3) On your iPhone, Launch browser (i.e. Safari) and then then 192.168.203.1
(Step 4) On Setup page, connect AnyCast to your Home WiFi, and then refresh setup page
(Step 5) On Setup page, click Upgrade to get latest version firmware from server
(Step 6) Wait for upgrade, and please do NOT power AnyCast off during upgrade procedure.
(Step 7) AnyCast will restart automatically. With the latest version, you may continue to mirror with iOS11 or iPhone8
Thanks it’s helpful
Everything works fine but in setup page I can't open internet option..it keeps on rotating shows nothing..
Sorry, we've released new firmware to fix this issue.
Now please use the temporary way to connect the dongle to your home router and upgrade the dongle to the latest version.
1. Take your Phone and switch on personal hotspot, then leave the Phone near the dongle to make sure there are two Wi-Fi signals around the dongle.
2. Use your another phone or laptop to connect to AnyCast SSID via Wi-Fi
3. Launch your phone or laptop browser and enter the IP address 192.168.203.1
4. Click "Internet" and there will show your home router and mobile hotspot
5. Click your home router to connect6. Click "Upgrade"
Thanks.
I to have same problem but i have solved it follow this
on hotspot in any device make sure that u should have more than one wifi so u can solve the problem like this
Hi everyone
I have Rk anycast don’t work with ios11 version 5.20
Sorry, the dongle you have is not our AnyCast dongle with only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is eight-digit number. And the IP address is different from our AnyCast (192.168.203.1).
Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to
ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video.
Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.
Thank you.
I can't get into 192.168.203.1 on my phone. Before installing ios 11 it worked fine but now I don't know what to do. Can someone please help me? :(
Sorry, please connect your phone to AnyCast SSID via WiFi before entering the IP address. You can also check the video inside.
If it still fails, please record a short video about your issue to support@any-cast.com for our checking.
Thanks.
Hello, I can connect my phone with ios 11 now to my TV, but it does NOT work when I want to watch videos on youtube. What should I do?
I have the 4.62.00 version who I upgrade it for the iPhone 8 version??
Sorry, the dongle you have is not our AnyCast dongle with the only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is an eight-digit number. And the IP address is different from our AnyCast (192.168.203.1).Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to
ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video.Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.Thank you.
If you are willing to order original AnyCast, you can refer to our authorized supplier to order the dongle:
www.aliexpress.com/store/2337093
is now anycast can ios 11? AM8252, i want to buy
Yes, you can order AnyCast from Any-cast.com directly. We've released new firmware to support iOS 11.x mirroring. Thanks.
But I still can't upgrade, it says that I have had the latest verison, but my firmware version is "15474002"! I have already connected to the Internet.
LKK additional: The chip of my anycast is am8252c, but it still can't upgrade
Sorry for replying late. Please upgrade the dongle to the latest version. We've released new firmware to support iOS 11. The latest version is 16422000
If it still fails, please record a short video about your issue and send to support@any-cast.com for our checking.
Thanks.
Sorry for replying late. Please upgrade the dongle to the latest version. We've released new firmware to support iOS 11. The latest version is 16422000
If it still fails, please record a short video about your issue and send to support@any-cast.com for our checking.
Thanks.
how can i do this m3plus
All real AnyCast made by AM8252 could be upgrade to support iOS11
All real AnyCast made by AM8252, could be upgrade to support iOS11
I cannot access internet setup it loading... alway
Sorry for the inconvenience.
We've fixed the issue in our new firmware. Now please use the below way to connect the dongle to your home router.
1. Take your Phone and switch on the personal hotspot, then leave the Phone near the dongle to make sure there are two Wi-Fi signals around the dongle.
2. Use your another phone or laptop to connect to AnyCast SSID via Wi-Fi
3. Launch your phone or laptop browser and enter the IP address 192.168.203.1
4. Click "Internet" and there will show your home router and mobile hotspot
5. Click your home router to connect
Thanks.
You are welcome to visit AnyCast website for more information.
(1) User Tips, any-cast.com/pages/user-tips
(2) Video Guide, any-cast.com/pages/video-guide
(3) Usage Guide for iOS, Android, Mac, and Windows, any-cast.com/pages/help
So the streaming is not smooth. It’s still laggy. Thanks tho
Sorry, we will keep on working hard to improve our product based on your valuable comments.
Thanks.
Excellent !!!!
Thanks for your feedback.
Can you do Downgrade?
Sorry, the downgrade is not available currently. Could you please tell us the reason you want to downgrade the dongle?
Thanks.
Hello, I can connect my phone with ios 11 now to my TV, but it does NOT work when I want to watch videos on youtube. What should I do?
panqueques condulcedeleche
Same with me 😢
Sorry, do you mind taking a photo of the dongle main screen shown on the TV for our checking? When watching RUclips, is there any reminder message popped out?
Thanks.
Sorry, do you mind taking a photo of the dongle main screen shown on the TV for our checking? When watching RUclips, is there any reminder message popped out?
Thanks.
Guide AnyCast There is a message that pops out in the RUclips video that says “connected to AirPlay” and then it automatically stops screening and the home page appears in my TV as well. I have checked and this does not only occur with YT videos, but with any other type of media video being displayed on my phone with ios 11
Sorry, do you mind sending the email to support@any-cast.com for us? Thanks so much.
When i updated my internet on my phone stopped working
Do you mean you can't connect to AnyCast SSID or mirror to the TV?
Can you provide us more information about your issue, we are happy to help you with the issue.
Thanks.
SONG?!?!
Thanks for using AnyCast. If you have any questions when using our product, welcome to drop us emails. Support@any-cast.com
Thanks.
What song is this? It’s 🔥
@@joshuavanderveen6739 Its to calm your frayed nerves Josh.
my ios is 11.1.1 and anycast fireware 10.8.50
It can mirror screen to Tv monitor anytime, but when i watch a video on web browser, its always crash when doing full screen.....how can I fix this problem ....??
Sorry, the dongle you have is not our AnyCast dongle with the only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is an eight-digit number. And the IP address is different from our AnyCast (192.168.203.1).
Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to
ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video.
Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.
Thank you.
Upgrade nahi ho Pa raha hai
Are there any error messages when trying to upgrade?
Helping me
For providing you better supporting customer service, please clarify the following information for us:
1. AnyCast SSID and firmware version (right down the screen corner ver.xxxxxxxx)
2. Your phone models and OS version
3. Symptom: failed to install, fail to mirror, fail to enter the IP address, fail to connect to the Internet...
Thanks for your understanding and help.
plz let me know if anyone here did ever try to upgrade to ios12
Announcements
(1) Real AnyCast made by AM8252, could upgrade to support iOS11 and iPhone8 from today.
(2) Counterfeit AnyCast made by RK3036, please wait for another TWO months for patch.
(3) Counterfeit AnyCast made by RK2928, no upgrade plan to support iOS11.
I bought my anycast on Amazon, I thought it was a safe place to buy, but I have the problem to update, so I guess is false anycast . What do I do?
Hello sir ... I have any cast with AM8251 chip ... you above stated AM8252 is this the same or not ? Please reply.
Guide AnyCast how I can upgrade my 4.62.00 version
Hi, is the patch for option (2) available? Can I have the firmware?
Guide AnyCast d
Hallo
wie kann ich meine anycast upgraden 192.168.49.1
es geht nicht????
Sorry, the dongle you have is not our AnyCast dongle with only six-digit number, it's a counterfeit one. And the version is not the same to ours (1547xxxx) which is eight-digit number. And the IP address is different from our AnyCast (192.168.203.1).
Original AnyCast has released new firmware to support iOS 11 screen mirroring. You can refer to
ruclips.net/video/j6Y2qMFpLRo/видео.html for the demo video.
Please return the dongle back to the store you bought and ask for a refund. It's appreciated if you would tell us the store information.
Danke ich habe schon erledigt;)
ismail yüksel اخي انا بعد التحديث الاخير لم تعد تعمل معي على هاتف اندرويد كيف العمل
شلونك بازوكا
Thanks for using AnyCast.
If you have any questions when using our product, welcome to contact us by sending email to support@any-cast.com
Thanks.
These things are rubbish.You are better off using a long hdmi lead.Its much easier and less heartbreaking
👍👍👍👍
好複雜啊！
您好. AnyCast 正版免費給您升級支持 iOS11 以及 iPhone 8, 推出時間也是全球領先. 祝您享受新的 iOS11 體驗.
蝦皮兩百元線都不用那麼麻煩🤔
以前直接用air play 就可以用了 現在好麻煩+用不好
AnyCast 正版升級相容 iOS11 之後, 使用方法跟舊版本 iOS10 相同. 但如果您使用非正版, 可能就有差異, 能否提供照片?
กูคนไทยแท้วะ
Its the most ridiculous useless, thing I have ever used.It wont work on windows 10 64 bit.ezmira cant find it.The url of 192.168.203.1 cant be found.I have yet to figure out how to upgrade the stupid firmware.Finally leaving the phone out of it! .usb to the crap thing might work from the computer.I would never recommend these sodding things.
All I see below are errors and dissatisfaction.Sorta defeats what its about.Ha Ha.Get a long lead folks.You wont regret it after all this crap.
poor video information please don't cheat people
Sorry, can you tell us your issues when using our product? We will try our best to help you.
Thanks.
กูเข้าเด้งๆวะ