glad you made this video. i got the same one from ray over a month ago and it's sitting in my garage because i haven't looked up how to install it lol. i'm not a car guy, but i know exactly what i want to install, however, i would definitely never figure how to do this stuff without watching other's tutorials. so thanks!
@@tau_tv Of course not a problem, love sharing what I can do with others! Im guessing the longer length is just to have it go through the door panel with the blue wire so you have easier access under the window switch to quickly make it sequential or not. It is not a problem to just chop it shorter if you don't plan on switching back and fourth on those modes 👍🏼
I just got the side mirror sequential light today. I install the passenger side no problem. Upon tapping driver side blue wire to thick green wire on the window switch, the left turn signal on the instrument cluster stay on. Everything seems to be working normally, except the left turn signal on the instrument cluster stays lit. I check the rest of the wires on that switch and only the fat green wire has 12v.
Its a mix lol, front lip is Ikon motor sports, side skirts are artisan spirit rep (ikon also), and rear spats are just no name from ebay made for a 2IS I just put them upside-down since it looked better that way to me haha
Honestly just used a random wire in my garage lol, but here is some that are meant for LED if you need some. It has positive and negative but you can just split the two and use 1 for the extension 👍🏼 amzn.to/3Q4k3vW
The blue wire is wired inside to keep the white DRL mode on when you have your lights on. If you have it wired to the yellow light it would only turn on when you unlock your car or when you walk close to it. You can do that if that is your preference to have the DRL off while you drive.
I tried to install mine but something went wrong. The turn signals on both mirrors no longer work. Both puddle lights stopped working too. I switched back to stock & turn signals still dont work. Turn signals on both headlights & tail lights work. All fuses check out so I'm at a loss. Anyone have any ideas?
It stays on when the lighting is switched up one click during the day and it comes on with the headlights automatically at night. Just depends if you want your drl, tails, illuminating during the day with the mirror lights on.
Do you know anyone who installed on an ES? My passenger side is fully installed but my driver side window switches aren’t illuminated with the headlights, it’s just always illuminated if the car is on. I might try and pull the wire out the door into the dash and tap the illuminated BSM button or maybe something in the kick panel but I would really like to avoid that.
I don't know anyone with this on an ES. I would double check all the connections to see if the wires are making contact and are not interacting with other wires that it shouldn't be in contact with.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
glad you made this video. i got the same one from ray over a month ago and it's sitting in my garage because i haven't looked up how to install it lol. i'm not a car guy, but i know exactly what i want to install, however, i would definitely never figure how to do this stuff without watching other's tutorials. so thanks!
for the green wire (sequential vs solid), is there any reason to not cut it shorter so you don't have the bunch?
@@tau_tv Of course not a problem, love sharing what I can do with others! Im guessing the longer length is just to have it go through the door panel with the blue wire so you have easier access under the window switch to quickly make it sequential or not. It is not a problem to just chop it shorter if you don't plan on switching back and fourth on those modes 👍🏼
you got this bro!!!! im not mechanically inclined and i got them installed on my GS
@@woBsquared let me see a pic I’m thinking of doing it pops🙏
@@KennyVothe 3rd brake light from the website does it come with the harness attached to it on both side already
Back with a banger! Thank you.
yesssirrrr, thank YOU!
i have these on 🔥 the drl is a small touch but makes it stand out 😎
yes! defiantly modernizes the car by a lot!
looks great man
thanks a bunch! 🤩
just got these lights from ray . i have a 23 is350 and was wondering where the brown and black wire would be tapped in to
What wheels do you have? They look great. Also, are they 19s?
theyre work wheels cr2p, and yes they are 19s!
@@KennyVo Thanks for the reply my man. Atomic silver gang ✌️
I had the same issue with the lights blinking wired the yellow and black to the ambient thanks for the information will be fixing the wiring tomorrow
Not a problem!
I just got the side mirror sequential light today. I install the passenger side no problem. Upon tapping driver side blue wire to thick green wire on the window switch, the left turn signal on the instrument cluster stay on. Everything seems to be working normally, except the left turn signal on the instrument cluster stays lit. I check the rest of the wires on that switch and only the fat green wire has 12v.
Check the rest of the connections you tapped on that side and make sure the wires spliced are not making contact with other exposed wires.
CLEAN STAMP!!!❤
What ground effects kit do u have, it’s the best looking one I’ve seen
Its a mix lol, front lip is Ikon motor sports, side skirts are artisan spirit rep (ikon also), and rear spats are just no name from ebay made for a 2IS I just put them upside-down since it looked better that way to me haha
What kind of wire did you use to extend the DRL cable and where did you get it from?
Honestly just used a random wire in my garage lol, but here is some that are meant for LED if you need some. It has positive and negative but you can just split the two and use 1 for the extension 👍🏼
amzn.to/3Q4k3vW
@@KennyVo perfect thank you! I had mine installed for like 8 months but never wired up the DRL.
Excellent video sir.
Thank you kindly!!
Is the window switch the only wire the blue can connect to? Why there?
looks great and thanks for sharing
thanks, not a problemmmm!
Fire!
thankkkkk yerrrr
Can you connect the blue wire to the yellow puddle light wire and have the same effect?
The blue wire is wired inside to keep the white DRL mode on when you have your lights on. If you have it wired to the yellow light it would only turn on when you unlock your car or when you walk close to it. You can do that if that is your preference to have the DRL off while you drive.
I tried to install mine but something went wrong. The turn signals on both mirrors no longer work. Both puddle lights stopped working too. I switched back to stock & turn signals still dont work. Turn signals on both headlights & tail lights work. All fuses check out so I'm at a loss. Anyone have any ideas?
Excuse me: aluminum ring type, size, ET value & J value?
Installing rn, did you disconnect battery in case of side air bags going off?
i did not
What size screws to remove side mirror?
When I roll my windows down to do this, my car keeps beeping. How come yours doesn’t beep ?
That's with the oem light? Or did you change it "brake light "
@@nelsonrosario925 yes it’s the OEM light
@@KennyVo can't find the mirror caps though, site is not working
Where can i buy them?
Do you know how to make the DRL stay on while you drive?
It stays on when the lighting is switched up one click during the day and it comes on with the headlights automatically at night. Just depends if you want your drl, tails, illuminating during the day with the mirror lights on.
What’s rims you got on? I am looking for some for my Rc 350
Work Wheels CR2P
What shift knob do you have? It looks sick
Thanks it was custom made from someone off Etsy 🤙🏼
Alright thanks, but just to be safe i bought the old ‘bride’ shifter you used to have since its cheaper. Just wanna see how it fits on my is300
Do you know anyone who installed on an ES? My passenger side is fully installed but my driver side window switches aren’t illuminated with the headlights, it’s just always illuminated if the car is on. I might try and pull the wire out the door into the dash and tap the illuminated BSM button or maybe something in the kick panel but I would really like to avoid that.
I don't know anyone with this on an ES. I would double check all the connections to see if the wires are making contact and are not interacting with other wires that it shouldn't be in contact with.
Appreciate the vids man! What fogs you running?
Not a prob, thanks for checking it out! They are winjet style fogs with auxito bulbs. I have a video on them also 😁
@@KennyVo Dope man, i'll scrub the history and take a look!
What kind of wire did you used to extend it?
Used random wire in my garage since its just LED, but here is a link if you need some actually made and sized for LEDs.
amzn.to/3i8bKCK
these fit the rcf bro? the mirrors look the same
just saw discription thank u
do these fit my camry plz
sorry it wont, just total the car
Is the installation pretty much the same as the 2021 is 350?
yes it is
Hey did you have any troubles with the drivers side ?
For some reason when I plug it in it doesn’t work but the oem one works and I’ve tried it on the other side and they work
I did not have any trouble with the driver side light, you might have received a faulty unit
Name song bro
lucky lean by samourai genji
@@KennyVo ty
That was simple? Lol
𝐩𝓻Ỗ𝓂Ø𝓈Ｍ