Miele washing machine ( classic ) front panel removal door lock door seal pump heater etc
HTML-код
- Опубликовано: 6 сен 2024
- how to remove the entire front of the older classic shape Miele washing machines this enable the changing of the door lock door seal waste pump heating element and motor brushes.
this video should be a template for all 'how-to' videos. In less than 3 mins you showed the whole process clearly, then identified all the typical parts to check for failures. absolute unit
So quick and so complete and all while holding the phone with one hand. You're awesome. Thanks.
Thank you
Thank you for saving my washing machine - easy to follow, straightforward, and precise instructions.
Thanks for your very fast tutorial! I just spent nearly 6 minutes watching a guy explain how to open a Miele door.
Brilliant. Enabled me to change the pump on my Miele Washing machine. I wouldn't have had a clue without it. Thank You!
😊
Quick and to the point! Thank you for taking the time to upload this great tutorial
Great, thanks, I got the front off with the help of this video, now I can replace the shock absorbers. You're a star. 🤜🤛
You should be able to reach them with just the front off although is usually take the sides off as well
@@washersdryersradios Got in no problem, replaced the two absorbers and am doing a test washing now, but it looks perfect, watertight, still and silent. It was the spring around the rubber I couldn't find before, and that revealed the main screw which, once removed, changed everything. Thanks again!
Tks, i fix the breakdown.
All is good now and my wife is happy. 😊
Love this style of explanation. No messing. No unessesssry nonsense. Bish bosh fix it.
Thanks, helped me quickly access the drain pipe and clear it- the drain error was gone. 😅
Thanks for making this video it’s saved me a £130 call charge from Miele. A comment for other viewers if you are needing to replace the door seal (big grey rubber thing) the inside of the seal is also held in place by a cable (same as outside one on video) this time though it’s held in place with a long screw on the left hand side that you need to unscrew completely. You can then remove the band. There is then just the rubber pipe from the soap dispenser draw to detach. This removes from the door seal side (not the dispenser). To avoid tearing the rubber pipe heat with a hairdryer until hot to the touch.
Thanks Rob I'll do a door seal video next week as I have one in the workshop to change.
@@washersdryersradios Awesome, thanks for this! Did you get around to making the door seal video as that would be very helpful? Cheers
@@Goatman-wl5nk I will do it I'm having a spot of bother actually getting to the workshop with all this going on
@@washersdryersradios No worries, understand things are pretty crazy right now hey! Stay safe
Yes trying to do that as well. Having difficult to detach the rubber pipe!!
This is a great vide. Thanks for making it. it really helped me in replacing the door lock. Very easy, no mystery and it saved me a fortune in call out fees. The part swapped right in. Many more years of washing ahead! If I could you get you a beer I would mate!
Glad you found it useful
Hi Adrian where did you get replacement lock for the Miele W413!
Thanks
Thank you! Never thought I would get this bloody thing disassembled! I managed by looking at your video. Miele W5874 here.
Glad to hear it helped
Thanks, you saved me a lot of headaches 😅
I’ll be doing this today on the same exact machine as soon as it drains it floods everywhere the lights flash and then it tripped everything lol. Got it for my sister as they said only a leak! Not a leak the whole contents of the drum empties inside the machine all over the bottom. And leaks all out… weirdly only does it on drain not before.
Very useful.Thanks for taking the trouble to put this up
Enfin un tuto ou il ne manque pas une seule étape de démontage .C'est parfait
Thank you for this vid. Do Miele machines all have thermostat in front and if so yes, Can I remove the front without taking the dryer off on top? Making structure weak I mean? Thanks a lot for your answer
Gracias por su claridad. Me ha ayudado muchísimo. Mil gracias
Great work on the video, thank you. Too many waste a lot of time with excessive and unnecessary talking.
Can you get at the motor through the front panel?
You are a life saver
Very helpful and concise. Thanks
Legend, thanks.
Really useful - thank you very much
Thank you so much!
Do you think the side panels can be removed without removing the door seal and just by moving the front panel to one side to access the screws? I'm looking for an easy way to replace the dampers.
If you're any good you should be able to replace the dampers by just removing the front panel
How do you get the control panel off.
On this type of machine pull the knob off then insert a thin bladed item in the joint between the white plastic frame of the printed perspex control panel and the perspex panel AT THE TOP EDGE ONLY gently press the panel down and lever it out simultaneously working your way along the top edge. Once this printed perspex panel if off you can remove the screws holding the control PCB to the frame.
Really useful video as it encouraged me to try and replace the heater element by myself. Trouble is, all the RUclips videos show a centre bolt holding the element in place; Miele WDA101 doesn't have this. Any advice on how to extract the element greatly appreciated....
Hi Mike the elements are a bit of a £@#£@+) to get out there is no central bolt on a Miele you need to grasp the two metal parts with connectors on pull the element towards you about three inches the gently get a screwdriver under the lip of the black rubber it sits in and work the lip on it out of the hole in the drum refitting is the same but backwards
@@washersdryersradios THANKS :) :) :)
Hi Rob do you have a video showing the bearing replacement on a W3725 washing machine?
Miele wkr 771 is not as ease after doing the same at 1:05 , is there a guide for my model? I have a problem with the hose being clogged for twin-dose
Twin dose machines are completely different and I haven't covered them yet as the majority are still under Miele warranty.
Is there a manual adjustment option for water level increase on a Miele W5943? If so how would it be done please.
How many bumper does it have? 2? 3? More?
great thanks
Sağol qaqaş
Sadly my machine is slightly different, of course, so I don’t think this is going to help me. Thanks for the video anyway.
Which machine is it
Thanks, I need to change the lock I think as the door is not closing, small plastic broken piece came out of the lock hole. Can you or anyone help?
Did you watch the video ??
@@washersdryersradios sorry I should have been clearer. I need help with finding the spare lock for the W412 model. If you could recommend a site to source this I would appreciate it, I have found nothing yet. I can then follow your video. Thanks
@@disct1597 are you in the UK ?
@@washersdryersradios yes in london
I have locks
Sounds a bit like jeremy clarkson lol
Would you able to help with a miele xl level 5000. Model w5985wps.
The machine is made for Italy, but i live in the USA
What's the problem
@@washersdryersradios the w5985 turn on, start w drain,, load water, than it goes on shutdown error 53. On any cycle.
Miele usa, won't touch it, as it was made for Italy, although it was removed from a usa boat, and i bought it in Florida
@@italia01139 by the sound of it you require new motor carbon brushes these are accessed by removing the front as shown in this video you will see the rear of the motor under the drum there are two T20 screws securing the plastic cover remove that then pull out the wiring plugs . There will be four T20 screws securing the part that the wiring went in to this is the brush housing remove the screws and pull the whole plastic assembly towards you carefully. Once it is out you will see the brushes these are easy to change and available on eBay for £10 ish. Replace those and do everything you've done backwards being careful to make sure the four pins sticking out of the brush assembly go back on to the receivers on the motor.
@@washersdryersradios thank you for replying, but according to Miele usa this model does not have carbon brushes, but an induction motor, there for they suggested to replace the mother board.
My issues is, I'd have to order from Italia, and have it ship here.
How could I confirm, that the motor is brush and not induction
@@italia01139 I'd suggest you pop the lid off and look at the PCB it will have a number on it something like say EDPL ---- put that number up I'll check
Non sono soddisfatta... Non comprerò più una miele....