Chapters 00:00 Introduction 00:29 16ths 01:08 8ths 01:39 Quarter and Half Marks 02:19 Mark Length 03:22 Visualizing the "Blocks" 04:11 Adding and Subtracting 05:47 Halving and Doubling Shortcut 06:31 32nds-"Light" and "Heavy" 16ths 07:40 Using a Tape Measure (Basics) 08:15 Burning an Inch 08:29 Damaged Tape Measures 08:48 How to Position the Blade 08:59 The Parallax Effect 09:16 Measuring Between 2 Surfaces
Thank you for making this so simple without using demeaning words. I am a welding instructor and you just wont believe how many students want to become welders yet they cannot read a tape measure. I was looking for a video that i could upload for them to use without their lack of knowledge being spread or without someone in a video saying things that are demeaning. Thank you
This was awesome. You are the first person I have ever come across that actually explained it in a way that made it so easy to understand. Where the heck were you back in school lol. THANK YOU, more I need to check out your other videos. 👍🏻😊
I am indebted to you good sir, I had no clue how to read a tape measure before now I can say confidently I can read it flawlessly. Thank you for such an amazing video and the effort you put in to make it.
Awesome video! I just scored amazing luck and got into the custom cabinets trade with no prior experience, this channel is gonna be a big help I can tell
i just took a framing job and have been trying to learn and study a tape measure before i start and i have watched so many videos and had trouble understanding it/and retaining the information but this is broken down well and the presentation is great , this videos you made is amazing and has helped me alot. thank you.
Howdy and Happy New Year. This was an excellent instructional video and I've learned a lot of new things. I came looking for accurate ways to measure items for 1:12 scale mini's and found you. I'm looking forward to your other videos because this was so very well laid out and explained. Thanks (I love learning new stuff).
I've heard it said, why learn fractions since we will never use them in our daily lives. Carpentry is all about fractions, decimals, angles, and curves. Thanks for your Comment.
Love this. Late husband tired to teach me but I always just say it’s 1 with three lines 😂 scary that I build stuff and I’m pretty good at it but I just can’t read the tape measure and sound so stupid. Thank you for dummying it down. 😊
Great video. I learned using a tape measure when I was a kid. I have a small woodshop where I've converted to metric though. Still have to use imperial everywhere else though.
I like this video for so many reasons.... I wish I had thought of using RUclips as a training tool for my staff.... This video would be on it.... ORRRR. Is it how to pass fractions test😊❤
Tip anytime you want to know half of a fraction just double the denominator and no the hook should be hooked and pull taught to read and if maleasuring on the inside of something it should be butted up the hook moves to compensate for this
Great but how do you explain that for small measurements, you suddenly switch to the decimal system (thousands of an inch)😮 why not keep fraction i.e 1/1024 of an inch for example 😂
Chapters
00:00 Introduction
00:29 16ths
01:08 8ths
01:39 Quarter and Half Marks
02:19 Mark Length
03:22 Visualizing the "Blocks"
04:11 Adding and Subtracting
05:47 Halving and Doubling Shortcut
06:31 32nds-"Light" and "Heavy" 16ths
07:40 Using a Tape Measure (Basics)
08:15 Burning an Inch
08:29 Damaged Tape Measures
08:48 How to Position the Blade
08:59 The Parallax Effect
09:16 Measuring Between 2 Surfaces
Thank you for making this so simple without using demeaning words. I am a welding instructor and you just wont believe how many students want to become welders yet they cannot read a tape measure. I was looking for a video that i could upload for them to use without their lack of knowledge being spread or without someone in a video saying things that are demeaning. Thank you
That's great! We're glad we could help!
@@cabinettalk8399 Wow, lol.
I’m in welding school
Thought I knew how to read a tape measure but I always blank out when dealing with fractions. Finally understand it
Yes, I always blank out too!! Good education video!!
@@Julie-yw7kxI feel you 😅
In school for carpentry and I didn’t know how to read a tape measure , after watching multiple videos this is the only one that helped me. Thank you.
first one i clicked on thankfully xp but same.
@@trea492 Glad the video was able to help!
This was awesome. You are the first person I have ever come across that actually explained it in a way that made it so easy to understand. Where the heck were you back in school lol. THANK YOU, more I need to check out your other videos. 👍🏻😊
Awesome, thank you!
Thanks. Best tutorial I've seen on the subject.
Me too
I am indebted to you good sir, I had no clue how to read a tape measure before now I can say confidently I can read it flawlessly.
Thank you for such an amazing video and the effort you put in to make it.
Thank you for making this video. It explains a lot more easier to understand then the other videos love it.
YOU'RE "THE BEST" MATH TEACHER IN "THE WORLD"!("YOU ROCK"!🎉🎉🎉🎉🎉🎉🎉)
Thank you very much. This was very helpful.
Very well done. So nicely explained. I am trying to learn how to read this for sewing. Thank you. Awesome video!
Awesome video! I just scored amazing luck and got into the custom cabinets trade with no prior experience, this channel is gonna be a big help I can tell
Thanks for you excellence introduction of tape measure. It’s well uderstanding and better any other vedios. I took advantages of this.
Best way I’ve ever seen it simplified for the beginner. Thank you!
i just took a framing job and have been trying to learn and study a tape measure before i start and i have watched so many videos and had trouble understanding it/and retaining the information but this is broken down well and the presentation is great , this videos you made is amazing and has helped me alot. thank you.
Howdy and Happy New Year. This was an excellent instructional video and I've learned a lot of new things. I came looking for accurate ways to measure items for 1:12 scale mini's and found you. I'm looking forward to your other videos because this was so very well laid out and explained. Thanks (I love learning new stuff).
Thank you! Very well done video. I am a bit autistic when it comes to learning things and this was very easy to understand and put to use immediately.
Thank you for this video. I am math phobic at 65 and have found this very useful.
Doesn't get any more simple than this. If you don't understand from this explanation, then you're screwed
im screwed
Same
Excellent , intellegent Teacher is that person that explaining in best way , here you did it! applause
Sooo happy to be in a Country that uses Metric.
This is by far the best tutorial on tape reading. You should make more tutorials
Thanks for sharing
More movies would do.🔥😂Some of us grew up watching your comedy masterpieces.🔥✊🏽
Unbelievable!!! I have just learned that I'm a complete idiot! This is mind-blowing.
Hahaha lol lol you are not alone me too don’t worry there are a lot of us!!!!!
You’re not an idiot. If we don’t use the information we learn on a day to day bases we lose it
Learn some ways how to read my tape measure well done sir⁹
Learning from your material thank you kindly 💯
Always something new to learn
I've heard it said, why learn fractions since we will never use them in our daily lives. Carpentry is all about fractions, decimals, angles, and curves. Thanks for your Comment.
Great job and thanx for bring us your knowledge!
grat training video. Thank you.👍👍👍
Love that a slow learner like me is still confused just love it 😭🫠
😂😂😂😂😂😂
Great information 👍🏼👌❤️
Thank you very much bro for the tips .now i can read tape measure very well
Thank you for this!
Thank you for this video
Is all coming back Thank you awesome
Ypu're a Great Math teacher.🎉🎉🎉🎉🎉🎉
What was so much more helpful than how my teacher explain the thank you
Thanks man I really appreciate
Love this. Late husband tired to teach me but I always just say it’s 1 with three lines 😂 scary that I build stuff and I’m pretty good at it but I just can’t read the tape measure and sound so stupid. Thank you for dummying it down. 😊
Good job keep going sir ❤❤
Thank ypu
Thank you.
Agreed
Been reading rulers since elementary school so yes we can read any measuring tool.
Very well said👍
Great video. I learned using a tape measure when I was a kid. I have a small woodshop where I've converted to metric though. Still have to use imperial everywhere else though.
Our cabinet suppliers are split, so we use both as well. Thanks for the feedback.
I like this video for so many reasons....
I wish I had thought of using RUclips as a training tool for my staff....
This video would be on it....
ORRRR.
Is it how to pass fractions test😊❤
Baking measurements basic math for the left brain that's me guilty I am left brain creative with motor skills that are necessary to use math nice work
Thank you so much now!!!!!!
Love it accurate teach!
Hi Nice video. Thanks
Thank you😢so much
I am dyslexic THANK YOU!!!
Wonderful!
Thanks
So much easier 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Good, thanks a lot. I really love your teaching sir. Am into upholstery furniture, once again thank you..
Just wondering if they had divided an inch in 10 equal parts rather than 16 it would made everyone's life easy
40 years old I lied on the application... And now I'm here.
.😅
hi, where's the 2/2 , the one that use on 1/8 came? is it given formula? thanks
THAS RIGHT!!!!
Got me feeling like I can go build a house now thank you 😂
I can't even do basic maths and I don't even understand this I am dumb as fuck
Tip anytime you want to know half of a fraction just double the denominator and no the hook should be hooked and pull taught to read and if maleasuring on the inside of something it should be butted up the hook moves to compensate for this
Ok sir
Why are we dividing by 2? Where did the 2 come from?
When i needed precise i using metrical tape its much easier.
❤
😊
3-2=1
Great but how do you explain that for small measurements, you suddenly switch to the decimal system (thousands of an inch)😮 why not keep fraction i.e 1/1024 of an inch for example 😂
tape measure
Idk if I'm having a dumb moment but I have no idea what you're talking about.
I have a foot I cut it in half and and 1/8
The lightbulb went off as far as fractions go after 50 years on the planet.
say after me: centimeters. you're welcome :P
Taylor Steven Lopez Brenda Martin Joseph
Mchtt I don’t understand
What the heck? What's wrong with metric ? 10mm= 1cm, 100cm=1 meter,
Why 1inch is 8 sections? Why not 10 to simplify things, then 1/16 then 2/32 WHAAAAAAAAT?
Wtf hahaha, I'm so glad that we use the metric system in Europe 🤣 This inch, foot, etc. measuring is ridiculous 🤣🤣🤣
And then Metric enters the Conversation….. no comparison…
Just stick with decimal numbers 😊
Metric system! Surely its obvious even to Americans that it's easier?..
Metric is dummies
Don't wast time in a old measurement system .... better go with metric ....😄😄😄
So confusing.
Thank you.