How to Make a Welding Cart - DIY Build

Поделиться
HTML-код
  • Опубликовано: 27 янв 2025

Комментарии • 110

  • @Waka567-t2f
    @Waka567-t2f Год назад +1

    Dude. That’s a beautiful piece. You are an artist.

  • @denofabsurdity
    @denofabsurdity Год назад

    Really appreciate the video … after Christmas, I’ll be building a similar one.

    • @chrclmnky
      @chrclmnky  Год назад

      thanks. yes go ahead it is fun and rewarding

  • @samcampagna1727
    @samcampagna1727 4 года назад +2

    Good and simple .Most carts are completely Overkill👌

  • @AerialLensVideo
    @AerialLensVideo Год назад

    Yours is FAR better than any HF cart. Yours is well done and will last decades. The "traditional" welding cart design -- especially those with thin gage metal and tilted top -- are iffy at best.

  • @JaimeXTV
    @JaimeXTV 4 года назад +2

    Nice work boss. Sarap mag welding gamit flux core welding.

    • @chrclmnky
      @chrclmnky  4 года назад

      Thanks. Yes that is true. 🤘😁

  • @Anjar_Kapry
    @Anjar_Kapry 5 лет назад +1

    keep the spirit and always take care of your health and continue working. your videos are very helpful. I have succeeded in making speaker monitor recording because I have watched your video. greetings in Indonesia

    • @chrclmnky
      @chrclmnky  5 лет назад

      Will do. Thanks very much for the awesome feedback, Anjar.

  • @9sheng420
    @9sheng420 5 лет назад +1

    A great cart, you have started DIY welding projects.

    • @chrclmnky
      @chrclmnky  5 лет назад

      Thanks for the compliment. Yes I like welding stuff.

  • @Gus1966-c9o
    @Gus1966-c9o 4 года назад +2

    For checking for square all you have to do is measure corner to corner . If both measurements are the same it’s square . Great job by the way 👍

  • @ifarted2656
    @ifarted2656 4 года назад +1

    Great job that is exactly what I was looking for thank you very much for the video

    • @chrclmnky
      @chrclmnky  4 года назад +1

      😄

    • @ifarted2656
      @ifarted2656 4 года назад

      @@chrclmnky yes I see a lot of diy welding carts square tubing this and that but I have a harbor freight flux core welder and I just need something small and simple and thank you

    • @ifarted2656
      @ifarted2656 4 года назад

      And I'm going to use bed frame

    • @chrclmnky
      @chrclmnky  4 года назад

      @@ifarted2656 The cheapest steel I can get is the scrap angle bars. :) Enjoy welding and let me know how your welding cart turns out.

  • @izaellopes6662
    @izaellopes6662 5 лет назад +1

    Muito bom seus videos sou do Brasil e gosto muito do seu canal ótimo trabalho..

    • @chrclmnky
      @chrclmnky  5 лет назад +1

      Thank you so much for the kind feedback, Izael. Cheers from the Philippines, sir!

  • @2bfrank657
    @2bfrank657 Месяц назад

    Nicely done. Not overly bulky and heavy like some YT projects. I don't think most people realise just how much can be done with a cut-off disc on an angle grinder and careful marking out. Also a good demo of how messy flux-core is! What was your reason for switching to stick for a couple of welds?

    • @chrclmnky
      @chrclmnky  Месяц назад +1

      thanks 2bfrank. i was an actually a beginner on welding. i feel comfortable using fluxcore mig than the stick. until now i still prefer using the fluxcore. yes it is really messy like a bird on a wire. 😂😂

  • @RolyTheHolyPaladin
    @RolyTheHolyPaladin 3 года назад +1

    Tidy, good job bro

    • @chrclmnky
      @chrclmnky  3 года назад

      Many thanks. 📐🔨😎🥳

  • @jonnythorman706
    @jonnythorman706 Год назад

    Nice 👍

  • @benjtv110
    @benjtv110 5 лет назад +3

    nice video, hows the powerhouse mig performance? will you recommend it for small welding project? thanks

    • @chrclmnky
      @chrclmnky  5 лет назад +1

      Many thanks. The machine can be used for small or big welding projects just fine.

    • @ryanratterree2119
      @ryanratterree2119 4 года назад

      Another good one is the century fc90. It’s cheap and works great for diy or farm type work.

  • @alix24028
    @alix24028 Год назад

    Great
    What about size for the three shelves please

    • @chrclmnky
      @chrclmnky  Год назад +1

      I measured my welding machine to fit into one of the shelves.

  • @benhunt1077
    @benhunt1077 8 месяцев назад

    Nice concept but I think it might need a support piece across the back for ur Mig plant and ur small plant needs some sort of tie down like a square saddle diy.

    • @chrclmnky
      @chrclmnky  8 месяцев назад

      Yes tnx for the tip.

  • @juliusbenedico4165
    @juliusbenedico4165 4 года назад

    Ayos ha ganda ang gawa m sir!

    • @chrclmnky
      @chrclmnky  4 года назад

      Thanks very much sir.

  • @imamaliyu
    @imamaliyu 4 года назад +1

    Are you a carpenter or a welder?, your ways of doing things look professional.

    • @chrclmnky
      @chrclmnky  4 года назад +1

      Hello Aliyu, how you doing brother. I'm a full-stack web developer and I do this RUclips stuff as a sort of a hobby. Cheers! 😊

    • @imamaliyu
      @imamaliyu 4 года назад

      @@chrclmnky In that case nothing can stop me from doing this, i'm also a web developer but seriously i developed interest in doing stuffs like this. Thanks

    • @chrclmnky
      @chrclmnky  4 года назад

      @@imamaliyu Yes sir. Good luck and enjoy building projects.

  • @Derpherppington
    @Derpherppington 11 месяцев назад +1

    Good design because square tubing as are over design for 100ppunds stuff

    • @chrclmnky
      @chrclmnky  11 месяцев назад

      Yes correct thanks

  • @durgeshgouthariya4160
    @durgeshgouthariya4160 5 лет назад +2

    nice ..

  • @ravenmagtibay1811
    @ravenmagtibay1811 3 года назад +1

    Where to buy that red wheel?

    • @chrclmnky
      @chrclmnky  3 года назад +1

      Online marketplace 🥰

  • @haroldsarino
    @haroldsarino 4 года назад +1

    Ayos brader

  • @benaplokcampandgo
    @benaplokcampandgo 4 года назад +1

    ayos sir ah ganda ng cart nyo and ganda rin ng mig. isa rin akong d.i.yer sir. nakulayan ko na bahay nyo. sana makulayan nyo rin bahay ko. salamat.

  • @xaintteevee7649
    @xaintteevee7649 4 года назад +1

    Nice diy cart idol. Matanong ko lng kung ano yang nasa baba idol na kulay pula at pra san yan?

    • @chrclmnky
      @chrclmnky  4 года назад

      Thanks sir. Yung kulay orange/pula? Portable stick welding po yan sir. 😎

  • @oilheaterb3791
    @oilheaterb3791 4 года назад +1

    Cool ha....pre ok ba gamitin yong mig power h.... mtgal ba masira ? Prng ok sya sa mga spot spot lalo na sa tubular ,kya lang malakas yong flux nia...need mo tlga mag gloves ,blak ko sna bumili ng mig..

    • @chrclmnky
      @chrclmnky  4 года назад

      Mas ok flus core keysa stick. Swabeng swabe sa stocks manipis man o makapal.

  • @fotoagogo
    @fotoagogo 3 месяца назад

    Welding on a wood worktop???

    • @chrclmnky
      @chrclmnky  3 месяца назад

      @@fotoagogo why not?

    • @760Kid
      @760Kid 8 дней назад

      I was trippin too but never seen anything burn. Im gonna try it.

  • @edgararaneta8116
    @edgararaneta8116 4 года назад

    pasensya na po sir tanung ku po ano po pwdi gamitin sa migweld 200mini para sa stainless fluxcore ? pwdi po ba stainless ito kagaya nang sayu migwelding machine sir thank you

    • @chrclmnky
      @chrclmnky  4 года назад

      Meron stainless flux core wire nabibili mga sobra isang libo per 250gram roll. Yun ginagamit pang stainless food processors.

    • @edgararaneta8116
      @edgararaneta8116 4 года назад

      thank you

  • @infinitycrown888
    @infinitycrown888 4 года назад

    Boss san nabibili ung tip cover mo ng mig gun...pamalit dun sa gas tip cover

  • @ronaldmanalansan4844
    @ronaldmanalansan4844 4 года назад

    sir saan mo nabili ung mga gulong na nilagay mo

  • @josewalbertramos1323
    @josewalbertramos1323 5 лет назад +1

    Ang galing mo idol. Pa share naman ng mga measurements.

    • @chrclmnky
      @chrclmnky  5 лет назад +1

      Many thanks brother. Measurements are just basic and near dimensions to the main welding machine.

    • @josewalbertramos1323
      @josewalbertramos1323 5 лет назад

      Ok idol, I got it. It's good thing na I have watched your vid. Ung iba kasi puro tubular ang ginagamit, eh ung dito sa atin ang ninipis, so I thought na baka hindi siya efficient. Therefore, I ended up buying few angle bars for this project. I hope I can make it as perfectly as yours since I am new to this welding hobby. Thanks a lot.

    • @chrclmnky
      @chrclmnky  5 лет назад

      @@josewalbertramos1323 if your welding machine a flux core like this then you can weld thin tubular square bars. Kindly see my other video building a work bench.

  • @dodong7217
    @dodong7217 4 года назад

    Paps, alin maganda gamitin yung Arc welding or MIG?

    • @chrclmnky
      @chrclmnky  4 года назад

      Mig po sir. Swabe sa kahit and anong stock, manipis man o makapal.

    • @jojopatino2042
      @jojopatino2042 4 года назад

      @@chrclmnky gasless ba yang mig mo boss?thanks

    • @chrclmnky
      @chrclmnky  4 года назад

      @@jojopatino2042 yes. Gasless flux core

    • @edgardoDesiderio
      @edgardoDesiderio 4 года назад

      JuSt 4 You boss mas maganda ang "MIG" kc malinis walang spatter at walang flux... yung MIG ibig sabihin METAL INERT GAS. may gas shielding po... Yung gamit nya similar lang yan sa stick welding kaya hindi cya totally MIG. Under parin cya sa FCAW flux cored arc weldin..

    • @chrclmnky
      @chrclmnky  4 года назад +1

      @@edgardoDesiderio yes correct

  • @arnoldmagadia905
    @arnoldmagadia905 4 года назад

    Ano po yun brang nun stick welding nyo? Ano po ba maganda brand na matibay? Ilang amp din po.

    • @chrclmnky
      @chrclmnky  4 года назад

      All are generic Chinese made just being rebranded to the local market.

    • @arnoldmagadia905
      @arnoldmagadia905 4 года назад +1

      @@chrclmnky ano po brand marerecomend nyo yun subok nyo na. Thanks po

    • @chrclmnky
      @chrclmnky  4 года назад +1

      @@arnoldmagadia905 same lang lahat.

  • @อติชาตรัตนพันธ์-พ3ญ

    Thx u Good job bro

  • @UnleadedPadyak
    @UnleadedPadyak 4 года назад

    boss hindi ka ba nagkakaproblema sa slag coverage sa flux cored? anong brand ng wire gamit mo?

    • @chrclmnky
      @chrclmnky  4 года назад +1

      Wala masyadong slag kagaya ng stick. Ang spatter yung problema. Todo linis matapos mag weld. Same brand ang .9mm flux core wire.

  • @nosyajyar1460
    @nosyajyar1460 4 года назад

    ano gamit mong settings na amp at wire speed sa angle bar sir?

    • @chrclmnky
      @chrclmnky  4 года назад

      Wire speed = slowest
      Amp = depends on stock thickness

    • @chrclmnky
      @chrclmnky  4 года назад

      This particular angle bar = 180-200 amps

    • @nosyajyar1460
      @nosyajyar1460 4 года назад

      @@chrclmnky thank you :)

  • @ruelcasalmer5236
    @ruelcasalmer5236 4 года назад

    anung model ng MIG welding machine mo sir

    • @chrclmnky
      @chrclmnky  4 года назад

      Powerhouse MIGWELD-200 MINI flux core

  • @edgararaneta8116
    @edgararaneta8116 4 года назад

    saan puwedi po outlet lagay ito powerhouse bumili po aku kasi sir puwedi po ba sa ordinary outlet ito sir? thank u

    • @chrclmnky
      @chrclmnky  4 года назад

      Yes sir, any 220v outlet.

    • @edgararaneta8116
      @edgararaneta8116 4 года назад

      pasensya na poh sir bago lang po aku sa magwelding dito po sa migwelding ku poh ....hindi po ba masusunod mga outlet kahit ano outlet ordinary po sir? ilang watts po ba ito migwelding na nabili ku kagaya po nang sayu ....pasensya bago lang po kasi aku thank u

  • @amolmattevlog3435
    @amolmattevlog3435 Год назад

    👌👌❤❤🙏🏻🙏🏻

  • @ไขควง-ฒ6จ
    @ไขควง-ฒ6จ 3 года назад

    สวย​มาก​ครับ​ เดี๋ยว​ผม​ขอ​ทำ​ตาม​เลย​ครับ​

  • @jigendaisuke
    @jigendaisuke 3 года назад

    pwd po mahingi ang measurements boss

    • @chrclmnky
      @chrclmnky  3 года назад +1

      Sure. There is a link to the TinkerCad 3D schematics in the video description. You need to create and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.

    • @danielbichokov1340
      @danielbichokov1340 3 года назад

      @@chrclmnky Hi, cant find the link, can u add it in a comment?

    • @chrclmnky
      @chrclmnky  3 года назад +1

      @@danielbichokov1340 sorry i forgot to put the link in the video description. I'll comment the link later. Thanks for reminding.

    • @chrclmnky
      @chrclmnky  3 года назад +1

      @@danielbichokov1340 Here it is - www.tinkercad.com/things/knYJvot0uU5
      You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
      Enjoy! :)

  • @um8440
    @um8440 Год назад

    Its must faster and cheaper to get a harbor freight cart.

    • @chrclmnky
      @chrclmnky  Год назад

      No harber fright around here.

    • @PkwyDrive13
      @PkwyDrive13 Год назад +3

      Some of us actually enjoy making our own tools, instead of buying a garbage one.

  • @notatsray
    @notatsray Год назад

    aloha......