Specifications of rebar rust remover OK-151

We tried to share with you all the features of our rebar rust remover product OK-151 in this video.
1. It is concentrated
It is concentrated. In other words, our product can be used by multiplying it with water. Depending on the contamination of the rust, you can dilute it with water in the following proportions. For example, with heavy pollution, you can put 1 unit of product and 2 units of water in a container.
Heavy: 1/2
Medium: 1/5
Light: 1/10
Note: It is used without diluting with water in case of excessive rust. If used by heating, the processing speed increases.
Information: For example, you have medium-polluted, rusted iron. You purchased our 5 KG packaged product. You can increase this product to 25 KG.
2. Does not consume mass and volume
It does not consume mass and volume. It only reacts with the rust layer. It corrodes metal surfaces to micron levels. You can review all the details in our ITU technical report that we have shared below.
www.ozkimsan.com/pas-sokucu-o...
3. Increases adherence
It increases adherence. If used in rebars, it ensures better adhesion of the rebar to the concrete thanks to the special inhibitors it contains. After the concrete is poured, air and water are disconnected from the iron, thus preventing further rusting.
OK-151 rust remover product application method
4. Slows re-rusting
It slows down the rusting of the metal it is used on.
Note: If you do not want the cleaned metal to rust again, do not paint, coat, protect oil, etc. We recommend that you protect it with . Because a bare metal will definitely oxidize, rust or corrode over time.
5. It is a preparation for dyeing.
It is a preparation for dyeing. If the product used will be painted, there is no need for any extra application. You can paint when the rust is completely removed and drying has occurred.
6. Application techniques are numerous
There are many application methods. You can apply the product using the spraying, dipping or brushing method.
Spraying: In the spraying method, the product is placed in a spray bottle. It is applied to the rusty or corroded area. Wait 10 minutes. If the rust is not completely removed, re-application can be performed.
Dipping: If the parts to be rusted are of a weight and size that can be dipped, the product is placed in a dipping container or pool. Then, rusty iron or corroded metals are dipped into this area. Wait until the rust is removed.
Brushing: The product is applied to the rusted iron with the help of a brush. Wait 10 minutes.
7. Provides 100% effective solution
It offers a 100% effective and definitive solution. If the iron to be rusted has not rotted, that is, has not lost its properties, the rust will definitely be removed.
8. It has a long shelf life
It has a long shelf life. The packaging we use for the product is specially produced. In this way, if you close the lid tightly after using the product, you can use it again after a long time, if necessary.
0:00 Start
0:17 Product features
4:01 End
#rust #rust remover #rebar
You can ask any questions you may have about our rebar rust remover product by calling our customer representative line or writing in the comments field.

[@yutkun]

Elinize sağlık.

[@ozkimsan]

Yutkun Bey merhaba;
Değerli yorumunuz için çok teşekkür ederiz.
Selamlar.

[@meteorolojist]

Uygulama öncesi ve sonrasını göstermeniz çok iyi olmuş.

[@ozkimsan]

Serhat Bey merhaba;
Değerli yorumunuz için çok teşekkür ederiz.
Selamlar.

[@Bilgin-mt8ke]

Merhaba sitenizden ok 151 aldım. Ben çamaşır makinasının metal sacındaki pasları temizleyeceğim de. Boya öncesi kaporta macunu cekmeme gerek var mi sizce, genelde zımparayla pas temizleyenler macun cekmeyi oneriyor tekrar pas cikmamasi icin. Su almayacak sekilde onlem almama ragmen yine de pas kusar mı macunsuz boya yapsam?

[@ozkimsan]

Merhabalar;
Ürünümüz boyaya hazırlayıcıdır. Pas sökülüp tamamen kuruduktan sonra boyama yapabilirsiniz.
Selamlar.

[@Bilgin-mt8ke]

​@@ozkimsanşuan uygulamayı yapıyorum çoğusunu giderdi pasın ancak baya kalın bı tabaka var siyah gibi gözüken bir pas, onu halen sökemiyorum. Sünger hiç fayda etmiyor, zımpara biraz söküyor ama çok uğraştırıyor. Ne yapmalıyım sizce?

[@ozkimsan]

Merhabalar;
O kısım pas değil de boya olabilir. Ya da maalesef tamamen çürümüş olabilir. Uygulamaya devam etmenizi tavsiye ediyoruz.
Selamlar.

[@Wqe-xg7mq]

Bu arabanın şaşe si biraz paslı onda işe yararım yazısı silme durumu olurmu saygılar

[@ozkimsan]

Merhabalar;
İşe yarar. Pastan dolayı tamamen şase numarası çürümedi ise silmez.
Selamlar.

[@iyikialmisimcom]

Telefonunuza ulaşılamıyor. Acil dönüş sağlarsanız sevinirim.

[@ozkimsan]

Merhabalar;
Firma sahibimiz acil bir ameliyat geçirdiği için Pazartesi gününden itibaren müşteri temsilcisi hattımız çalışacaktır.
Selamlar.