Chamberlain should ditch the enclosed instructions on programming their remote for a Genie opener and just provide a link to your video! Instructions were a total fail and I thought I was going to be returning the item to the store. I found your video after searching on Goggle. Easy to follow and worked on the first attempt. Thanks for sharing your knowledge and expertise!
I love you man after 2 years living here at my house this video finally got me to get my 2nd garage door to work I wish I could like a video more all the others ones didn’t work for me
Thank you for this explanation! The instructions in the box were out of order and even when rearranged they didn’t work. Worked perfectly on the Genie Intellicode!
Thank you!!! Our Chamberlain remote instructions did not even say to press and hold the button on the remote, just to press it. We were confused when their info didn't work. Pressing and holding briefly till the remote's light stayed on was the trick. (BTW we did not have to clear any memory. I didn't want to do that anyway in case I erased the other remote's programming.)
THANK YOU THANK YOU!!! I spent about two hours trying to program my LiftMaster remote to my Genie opener. Watched other videos, even printed off the the instructions from the LiftMaster website. All to no avail until I found your video. Thanks so much!
Chamberlain and liftmaster are the same company and are tototakky interchangeable. You're talking me u have the last game you do and you DONT have a Chamberlain brand opener???
DUDE, out of 8 videos, yours was the only one that helped me program my extra remote for my spare car! YOUR VIDEO IS AWESOME, AND SO ARE YOU FOR SHARING! YOU ROCK!
Awesomeness 😎!! I'm sorry you had to go wading through all the nonsense before finding my video. If it's garage door related, typically I have a video for it. You could use me as your internet garage door guy! 💯👍🏼
@@garagedoorgenius Hello again, how many remotes can that genie take? After I did my 4th remote via your video for my new 4th remote, my 2nd one gave out 3days ago, it opened, went to close it an nothing? Gonna try to reprogram it an installed new battery, but that battery was not old? An the light in remote has never worked so flying blind! Any advice? Like throw it out! Thanks an hope you an yours had a great Halloween! ✌🏻 TL
Thanks for your video! I watched several others, read the FAQ's for both Chamberlain and Genie and not one of them mentioned except yours, that one needs to observe the blinking RED LED learn light change to solid to see that the remote and opener have synced. For over an hour, I'm getting pissed off not seeing the light bulb flash, or door open etc.
Mike, so you ended up getting it programmed? FYI, a fresh battery makes the syncing up part easier. Even if it's a brand new remote. Those batteries are half dead and makes a poor connection.
@@garagedoorgenius Yes, I cleared the opener's memory like you suggested since I learned that my specific Genie model can only be linked to a maximum of 6 openers, including our vehicle with Homelink capabilities. After watching your video, I successfully reprogrammed 4 remotes.
I have a Chamberlain clicker model KLIK5U-BK2 which I want to program to operate a Genie model 2128. The opener is newer and came with a new house only six months old. I followed both the Chamberlain instructions and the Genie instructions. The chat with Chamberlain ended when the support person told me Chamberlain will not work with a newer Genie opener. What do you think? Is Genie gone over to the proprietary dark side? Any construction suggestions are welcome.
Thanks for the video, it helped me program my remote. I have another question. I have a Genie opener and Genie keypad but a Chamberlain remote and I am unable to program them both. Is there a way to use both the keypad and the remote? When I moved into the house the remote worked and then I programmed the keypad and it canceled the remote so I reset the keypad and reprogrammed the remote and it works but the keypad does not.
You're welcome! Did you clear out the Genie Keypad? Genie keypads need cleared before entering new codes. Depending on which one you have because there are a few the sequences to clearing them out are different so you might want to research that. I don't have a video yet on how to clear out the different Genie keypads which that is coming in the future.
Hmm..you should be able to program both keypad and remote. I know with Genies it sometimes takes a few tries. Clear everything, even the opener. Press and hold learn button until red led stops flashing. Then attempt it again.
I need help. I followed your steps and my genie model 7055 won't program my chamberlain universal remote. I tried these steps and watched a ton of videos but doesn't work.
Question, I have a Sears craftsman 3/4 hp motor that came with a smart wall button which has an LCD screen along with a motion detector among other things and it sends all the commands using an 18/2 conductor. The lLCD wall box got damaged so I wanted to use a basic doorbell button. Would it work for basic open/ close operation or does it have to be the same replacement type? I don’t want to replace wall box as I will be buying new unit latter on. Thank you.
Is it an older Sears Craftsman? If so, then yes. Newer Sears Craftsman with a yellow antenna you can't use a regular door bell button, it has to be specifically for a Chamberlain new style product. Old style - www.amazon.com/dp/B000SRVB76/ref=cm_sw_r_cp_apa_i_qgF-Fb11EN9PC New style - www.amazon.com/dp/B07YCTRP4S/ref=cm_sw_r_cp_apa_i_zhF-FbWPX82FE
Hello! I recently bought 2 chamberlain garage door remotes to program to our genie overhead door python 2. It had 2 chamberlain garage remotes programmed previously but we lost one. I’ve watched your video multiple times and tried it out without cleaning memory and then with cleaning it and I ended up wiping the memory of the other opener we originally had. I wanted to know if you had an idea of what can be going wrong? I would really like to have 3 openers but also my issue is after the first 2 steps of cleaning, and then pressing the program button on for the remote and the learn code again and then pressing the button on the clicker about 6 times, they should match up the lights. That happens but when I save and then click again to open the door, nothing happens. what could I be missing or doing wrong?
Sorry for the late reply. Maybe you're clicking it one to many times. When the LED on the opener goes completely off, then press the little black button in the remote. 🤔
@@garagedoorgenius I think that was the case! I got it to program two of the controls after slowing down and counting them. Thanks so much for getting back to me!
@@garagedoorgenius I just went out and bought a new one that had two remotes pre-programmed and and its very qauiet as the old one sounded like a freight train coming down the street so I do appreciate the feedback.
I am using the same remote with the same opener. I programmed the opener and now when I press the button on the remote the learn button on the opener flashes but the door doesn't move. Any ideas?
A new battery helps with a strong signal. If there is a new battery, try clearing the memory on the opener and then the programming process again. I know what you mean tho. Genie's sometimes will do that.
@@aaronholmes6910 when your pressing the remote button try doing it firmly but quickly. Like I said, Genie's do that. I've had to try the process several times before it worked.
youre title for chamberlain but your using a liftmaster... titled for a genie but my genie has different learn buttons and completely different lights.. mine did not work... maybe be more specific cuz it didnt work for my genie 500 series model 1035.. 😒
We are continually keep on trying to add two universal chamberlain remotes and it’s not working, why is that? And if it is possible could you teach me how?
Sorry for the late reply. So you have 2 universal remotes. You get one to program, but the other doesn't synch to the unit? What brand of machine you programming to? Tips- New batteries. Or clear the memory on the machine by pressing and holding the smart learn button until the led stops flashing. Then try it. Good luck !
![GUILTY GEAR -STRIVE- Season Pass 4 Playable Character #1 [Queen Dizzy] Trailer](http://i.ytimg.com/vi/nXDsAgYXXv4/mqdefault.jpg)
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
If this video helped you out and saved you a service fee, please feel free to donate to the channel!
www.paypal.me/garagedoorgenius
Chamberlain should ditch the enclosed instructions on programming their remote for a Genie opener and just provide a link to your video! Instructions were a total fail and I thought I was going to be returning the item to the store. I found your video after searching on Goggle. Easy to follow and worked on the first attempt. Thanks for sharing your knowledge and expertise!
So glad the video helped you out! I appreciate the feedback. 👍🏼👊🏼
I love you man after 2 years living here at my house this video finally got me to get my 2nd garage door to work I wish I could like a video more all the others ones didn’t work for me
@@nostopen6808 heck yeah broh! I really appreciate the awesome feedback 🤠. Just sub and like, that's all I can ask! 👊🏼
Bruhhhh watched 18 videos on this and you are the only one who’s stuffnworked
😎💯🔥
Thank you for this explanation! The instructions in the box were out of order and even when rearranged they didn’t work. Worked perfectly on the Genie Intellicode!
Thanks for the awesome comment, Danny. Glad to help! 👍🏼
I have watched so many videos and tried many many times but didn’t work. This is the most helpful garage remote setup video. It worked. Thank you.
I really appreciate the awesome comment! So glad the video helped. 🤘🏻💯
This worked perfectly! I thought I had bought an incompatible remote, but this trick synced it right up. Thanks so much!
You're welcome 😁!
Very helpful. I had no idea how to proceed programming a 20 year old Genie! Even I could do it! Thank you!!!
Awesome!
You're welcome.
Thank you so much. This video really Helped. We could figure it out until we watched this!
🙏🙏
Thank you!!! Our Chamberlain remote instructions did not even say to press and hold the button on the remote, just to press it. We were confused when their info didn't work. Pressing and holding briefly till the remote's light stayed on was the trick. (BTW we did not have to clear any memory. I didn't want to do that anyway in case I erased the other remote's programming.)
You are welcome! Glad the video helped clarify the step you were having troubles with. Also, thanks for the positive feedback!
THANK YOU THANK YOU!!! I spent about two hours trying to program my LiftMaster remote to my Genie opener. Watched other videos, even printed off the the instructions from the LiftMaster website. All to no avail until I found your video. Thanks so much!
Chamberlain and liftmaster are the same company and are tototakky interchangeable.
You're talking me u have the last game you do and you DONT have a Chamberlain brand opener???
Thanks, no other video I watched mentioned clearing the codes out, nor that the unit would not click.
After two hours your video saved me! Thank you!
Glad to help!
DUDE, out of 8 videos, yours was the only one that helped me program my extra remote for my spare car!
YOUR VIDEO IS AWESOME, AND SO ARE YOU FOR SHARING! YOU ROCK!
Awesomeness 😎!! I'm sorry you had to go wading through all the nonsense before finding my video. If it's garage door related, typically I have a video for it. You could use me as your internet garage door guy! 💯👍🏼
@@garagedoorgenius then after I send you this Thanks again reply, I am subbing to you!
Have a Great day & Weekend!
You're the best! You do the same. Have a marvelous weekend yourself!
@@garagedoorgenius I'm subscribing! Thanks bro!
@@garagedoorgenius Hello again, how many remotes can that genie take? After I did my 4th remote via your video for my new 4th remote, my 2nd one gave out 3days ago, it opened, went to close it an nothing?
Gonna try to reprogram it an installed new battery, but that battery was not old? An the light in remote has never worked so flying blind! Any advice? Like throw it out!
Thanks an hope you an yours had a great Halloween! ✌🏻 TL
Thank you! About gave up until I found your instructions.
You're welcome!🙂
Me too! Just saved me about $35 from having to buy a new remote!
@@kennethchamberlin4704 awesomeness 😎💯!
Are Craftsman remotes incapable of being paired with Genie openers? It lists Yellow/Purple/Red/Orange/Green but the Genie has a f#%^$& Black button. 😭
@@NickyFlips unfortunately no. 😬
Thank You! Best video. I watched 10 and was unable to get it to work.
Thank you 🙏.
Thank you, thank you. I finally found the right video. Great job!
Glad to help!
Thanks you so much. After a lot of watching other videos and unsucessful attempts, I was successful. Thank you again!
You're welcome 😊. Sorry it took so long to find the right video! 👍🏼🤪
I just got two doors programmed with a new remote with your help here.....thank you sir! (great clear clip)
You're welcome 😊! Glad to help.
@@garagedoorgenius Cheers man!!
🍻
thank you!! None of the other videos i watched were helpful! This worked on the first try 🙌🏼
You're welcome! Glad to help. 🙂
thanks excellent video was done in under five minutes
I really appreciate the awesome feedback! 👊🏼
That was Slam dunk! Thanks Bud 🤛
Chamberlain support didn't help much but this video did!
Thanks for the feedback!
Glad to help, Ben. 🙏
Thank you so much for solving my problem ❤
Always here to help! Thank you for the comment. 👍🏼
That was very helpful thank you. I helped my dad program his to a genie😀
Glad to help! 🙏
You just saved me a shit ton of time thank you brother 💪🏼💪🏼
Thanks buddy.... Nice n simple 👍🏼
Glad to help, Adam! 🔥👍🏼🔥
You saved my life! I've been going crazy when I lost my remote.
Glad to help Jake!
You are the man thank you so much!
Glad to help you my friend! 👊🏼🤟🏻
Instructions on the universal remote said absolutely nothing about the button inside the remote.. Thanks man.. Big help
10-4 🙏
Thank you so very much! It worked like a charm first time
Glad to help Ron!
Thank you!! Could not figure it out!
10-4! Glad to help.
You are such a blessing 🙌🏽
Thank you for the kind words! 🙏
This was massively helpful. Thank you
You're welcome bro! 🔥
Thanks for this
@@nancyswirsky9061 you're very welcome 🤗.
Good info bro. I'm showing this to my buddy on Monday.
Robert Beckler
Thanks Robert! I really appreciate it.
Very good item.
🙏
Thank you so much! Very helpful video! 💯👌🏻😁
🙏
Saved my bacon bro. Thank you!!
You're welcome Josh! 💯
Thank you!!🤍
Glad to help!
Very helpful. Thank you!!
Glad to help, Linda 🙏.
You are awesome!!!! Flawless instructions!!!👏🏽👏🏽
Thank you for the positive feedback! Glad to help. 🙏
Very helpful, thanks.
Helps a lot🎉
🙏
Thanks for your video! I watched several others, read the FAQ's for both Chamberlain and Genie and not one of them mentioned except yours, that one needs to observe the blinking RED LED learn light change to solid to see that the remote and opener have synced. For over an hour, I'm getting pissed off not seeing the light bulb flash, or door open etc.
Mike, so you ended up getting it programmed? FYI, a fresh battery makes the syncing up part easier. Even if it's a brand new remote. Those batteries are half dead and makes a poor connection.
@@garagedoorgenius Yes, I cleared the opener's memory like you suggested since I learned that my specific Genie model can only be linked to a maximum of 6 openers, including our vehicle with Homelink capabilities. After watching your video, I successfully reprogrammed 4 remotes.
@@limster1903 Awesomeness!! 💯
Thank you so much!!!!
You're welcome! Glad to help. 🤘🏻
Thank you!
You're welcome!
Best video!!!
@@robinlewis9116 I appreciate the awesome feedback! Thanks 👍🏼
Right on!
This was very helpful and spot on! Thank you very much!
Awesomeness !!
You're welcome and thanks for watching.
Brilliant. Thank you very much.
Thank you
You're very welcome! Thanks for the comment. 👍🏼
Bro thank you!
🙏
Awesome video!!!!!
Thank you sir! 🙏
Thank you !!!!
Glad to help homie! 👊🏼
@@garagedoorgenius 💯💯
Perfect
Thanks for the comment! 🙂
this is great, but how do I do two new remotes if I have to delete the programming each time for each remote?
You don't have to delete the programming. Just program the 2nd remote minus the deleting part
OMG thank you! 😂
No worries! 👊🏼
Pretty much what everyone else said- Thanks
You're very welcome 😊!
Was starting to get frustrated!!! The part that helped me the most 2:00
I have a Chamberlain clicker model KLIK5U-BK2 which I want to program to operate a Genie model 2128. The opener is newer and came with a new house only six months old. I followed both the Chamberlain instructions and the Genie instructions. The chat with Chamberlain ended when the support person told me Chamberlain will not work with a newer Genie opener. What do you think? Is Genie gone over to the proprietary dark side? Any construction suggestions are welcome.
Great video! Quick question. My controller only opens my garage but doesn’t close it. Any advice on that problem? It would be very helpful.
Thanks for the video, it helped me program my remote. I have another question. I have a Genie opener and Genie keypad but a Chamberlain remote and I am unable to program them both. Is there a way to use both the keypad and the remote? When I moved into the house the remote worked and then I programmed the keypad and it canceled the remote so I reset the keypad and reprogrammed the remote and it works but the keypad does not.
You're welcome!
Did you clear out the Genie Keypad? Genie keypads need cleared before entering new codes. Depending on which one you have because there are a few the sequences to clearing them out are different so you might want to research that. I don't have a video yet on how to clear out the different Genie keypads which that is coming in the future.
I did clear the Genie Keypad. I used Prog-6-Up/Down buttons. That was how I was able to program the Keypad because it wouldn't work otherwise.
Hmm..you should be able to program both keypad and remote. I know with Genies it sometimes takes a few tries.
Clear everything, even the opener. Press and hold learn button until red led stops flashing. Then attempt it again.
Ive git the same problem the Genie model i have is different but same issue can’t program universal remote and keypad
I need help. I followed your steps and my genie model 7055 won't program my chamberlain universal remote. I tried these steps and watched a ton of videos but doesn't work.
Have you tried erasing the memory on the garage door opener? Do that and then try programming.
Great video. Can I program 2 Chamberlains to open the Genie Garage door?
Yes you can! 👍🏼
Question, I have a Sears craftsman 3/4 hp motor that came with a smart wall button which has an LCD screen along with a motion detector among other things and it sends all the commands using an 18/2 conductor. The lLCD wall box got damaged so I wanted to use a basic doorbell button. Would it work for basic open/ close operation or does it have to be the same replacement type? I don’t want to replace wall box as I will be buying new unit latter on. Thank you.
Is it an older Sears Craftsman? If so, then yes. Newer Sears Craftsman with a yellow antenna you can't use a regular door bell button, it has to be specifically for a Chamberlain new style product.
Old style - www.amazon.com/dp/B000SRVB76/ref=cm_sw_r_cp_apa_i_qgF-Fb11EN9PC
New style - www.amazon.com/dp/B07YCTRP4S/ref=cm_sw_r_cp_apa_i_zhF-FbWPX82FE
Thank you so much dude, the directions sucked, your video worked.
You're welcome! Thanks for watching.
Hello! I recently bought 2 chamberlain garage door remotes to program to our genie overhead door python 2. It had 2 chamberlain garage remotes programmed previously but we lost one. I’ve watched your video multiple times and tried it out without cleaning memory and then with cleaning it and I ended up wiping the memory of the other opener we originally had. I wanted to know if you had an idea of what can be going wrong? I would really like to have 3 openers but also my issue is after the first 2 steps of cleaning, and then pressing the program button on for the remote and the learn code again and then pressing the button on the clicker about 6 times, they should match up the lights. That happens but when I save and then click again to open the door, nothing happens. what could I be missing or doing wrong?
Sorry for the late reply. Maybe you're clicking it one to many times. When the LED on the opener goes completely off, then press the little black button in the remote. 🤔
@@garagedoorgenius I think that was the case! I got it to program two of the controls after slowing down and counting them. Thanks so much for getting back to me!
can you do this with two remotes?
mine only opens and wont close the door after following this?
@@kennydargert2461 make sure your sensors are aligned... 🤔
@@garagedoorgenius sending light is amber and recieving light is green so i believe they are...
@@kennydargert2461 did you try adjusting the force controls UP just a wee bit?
@@garagedoorgenius I just went out and bought a new one that had two remotes pre-programmed and and its very qauiet as the old one sounded like a freight train coming down the street so I do appreciate the feedback.
I am using the same remote with the same opener. I programmed the opener and now when I press the button on the remote the learn button on the opener flashes but the door doesn't move. Any ideas?
A new battery helps with a strong signal. If there is a new battery, try clearing the memory on the opener and then the programming process again.
I know what you mean tho. Genie's sometimes will do that.
@@garagedoorgenius brand new remote and I have wiped the memory twice. Was hoping I missed something
@@aaronholmes6910 when your pressing the remote button try doing it firmly but quickly. Like I said, Genie's do that. I've had to try the process several times before it worked.
No worky
Can you program a genie remote to a Chamberlain/liftmaster opener?
No sir.
I followed step by step the light stays on but the continue click doesn work
Took my time figured it out thanks needed that
Sorry for the late reply. Congratulations getting the job done!
youre title for chamberlain but your using a liftmaster... titled for a genie but my genie has different learn buttons and completely different lights.. mine did not work... maybe be more specific cuz it didnt work for my genie 500 series model 1035.. 😒
It'll work. You're doing it wrong. It's the user this time bud.
Can I program two remotes? I programmed one and I’m wondering if I reset it for another it won’t work for both…
Yes, you can program multiple remotes.
You shouldn't have to reprogram existing remotes.
HELP!!! Does anyone know if a lift master universal remote can be used to open a marantec M line 4500.
Won't work. Sorry.
Do u have any idea of what kind of universal remote that I can buy that will work??
There isn't one I know of. Just order a Marantec remote from Amazon. They are SUPER easy to program.
Ok will do just wanted to ask to be sure. Thank u again..
No worries!
We are continually keep on trying to add two universal chamberlain remotes and it’s not working, why is that? And if it is possible could you teach me how?
Sorry for the late reply.
So you have 2 universal remotes. You get one to program, but the other doesn't synch to the unit?
What brand of machine you programming to?
Tips- New batteries. Or clear the memory on the machine by pressing and holding the smart learn button until the led stops flashing. Then try it.
Good luck !
THANK YOU SO MUCH!!!