Feels good when you fix something and it works well afterwords At about 5:28 the world melts for a second and shame poor cat was chased away when you started up the bike
+FixITwithC4 haha ya oops forgot the cat was there :P Weird that it does that at 5.28. The raw file is fine. Must have lost connection or something during the upload.
My exhaust is the least of the neighbors worries. There's a guy with a Cobra replica down the road. That V8 is plenty loud for all the neighborhood to hear :P
Behind the left side panel it should be a box with tools and under it a tank stand.Check for it the next time you may want to use it.Great video by the way!(check on 3:00 ruclips.net/video/PmvRY8shaD4/видео.html)
I really like your video, i am struggling to get off the plastic screws. I bet you recorded it with a GoPro. If I may say so, i advise you to put on the open backdoor for a better audio recording. one last thing: i was looking for aftermarket mirrors because over 7000 rpm the stock ones start vibrating so hard, which are the ones you bought? thank you
+Alex_-91-_ Hi! Which plastic screws are you referring to? I actually recorded with a DRIFT HD and a microphone inside my helmet. Was the audio poor quality for you? Yes I find that my mirrors vibrate a lot at around the same RPM's. My mirrors still vibrate even though I changed them. Some suggestions I've read say you can try heavier bar ends as well as filling the bars with lead pellets or even black silicone.
the shitty ones you got out with the help of your nail. no, the audio wasn't bad. Only a little bit cushioned, that's it. At the end of the video I saw your mirrors preatty steady, that's the reason I asked your mirror's brand.
+Dark Rider That's how i did it. I fucked up the screw though.....likely nobody watch the bike in that direction :). One last question: which brand are exactly your mirrors?
How did u disconnect the connector and the hose from the airbox? The hose at my bike is so god damn fixed in position it doesn't move at all. Just pull?
Hey, It has a small metal clamp on it that you press together and then pull down. Then you can just pull the hose off. Should be too hard to remove. Could try some WD40 around it to try and loosen it up if the rubber has become hard.
Hi, i've watched your video 100 times but i cant see how do you disconect the IAP sensor from the top half of the air cleaner box. There is 1 switch but when i remove it, there is also 1 cable still attached to the box preventing me from fully removing the top half of the box. Ps: i changed the air filter but i lost 1 bolt from the box in the motorcycle so i need to do this to find it. I am afraid to ride like this :)
TheBubebodom Hi! as far as I remember there was only 1 plug that I had to disconnect from the airbox to open it up which sounds like the one you have done already. hopefully you come right with your bike and find the screw. sorry I couldn't be of more help.
Its best to have very little gas in the tank when lifting it. If its too full then the excess gas with run into the overflow tube and leak out the bottom of the bike. Id suggest having less than half the tank full when lifting it up.
Thank you! Unfortunately not :( I sold the GSR and got the CBR 600RR. Then sold the CBR and got my current bike which is the Aprilia Tuono RSV1000. The GSR was a really great bike and the Leo Vince pipes made it sound even better!
The cat is sitting there like "if he'd only asked me it would have been done 5 minutes ago".
Feels good when you fix something and it works well afterwords
At about 5:28 the world melts for a second and shame poor cat was chased away when you started up the bike
+FixITwithC4 haha ya oops forgot the cat was there :P Weird that it does that at 5.28. The raw file is fine. Must have lost connection or something during the upload.
+FixITwithC4 Haha the poor cat doesn't like the new exhaust at all. Much like the neighbours, I suspect
My exhaust is the least of the neighbors worries. There's a guy with a Cobra replica down the road. That V8 is plenty loud for all the neighborhood to hear :P
Dark Rider
You should do a rev battle one night at 3am lol
Behind the left side panel it should be a box with tools and under it a tank stand.Check for it the next time you may want to use it.Great video by the way!(check on 3:00 ruclips.net/video/PmvRY8shaD4/видео.html)
thank u so much.I know now With your help
Awesome! I'm glad I could help :)
Thanks for help.... :-)
No problem :)
Thanks for video)
I'm glad I could help :)
I really like your video, i am struggling to get off the plastic screws.
I bet you recorded it with a GoPro. If I may say so, i advise you to put on the open backdoor for a better audio recording.
one last thing: i was looking for aftermarket mirrors because over 7000 rpm the stock ones start vibrating so hard, which are the ones you bought?
thank you
+Alex_-91-_ Hi! Which plastic screws are you referring to? I actually recorded with a DRIFT HD and a microphone inside my helmet. Was the audio poor quality for you?
Yes I find that my mirrors vibrate a lot at around the same RPM's. My mirrors still vibrate even though I changed them. Some suggestions I've read say you can try heavier bar ends as well as filling the bars with lead pellets or even black silicone.
the shitty ones you got out with the help of your nail.
no, the audio wasn't bad. Only a little bit cushioned, that's it.
At the end of the video I saw your mirrors preatty steady, that's the reason I asked your mirror's brand.
ooh yes. Try a small screw driver with a thin flat head under the screw to help you get it out of the slot.
+Dark Rider That's how i did it. I fucked up the screw though.....likely nobody watch the bike in that direction :).
One last question: which brand are exactly your mirrors?
hahaha! Well im sure there are replacements somewhere :P
They are oxford universal mirrors I think.
Jeez, 8 months on an air filter, it must be nice to ride a road bike : P
+BBQ Rider haha ya it was needing to be replaced loooooong ago. The poor bike was suffering lol
How did u disconnect the connector and the hose from the airbox? The hose at my bike is so god damn fixed in position it doesn't move at all. Just pull?
Hey, It has a small metal clamp on it that you press together and then pull down. Then you can just pull the hose off. Should be too hard to remove. Could try some WD40 around it to try and loosen it up if the rubber has become hard.
@@DarkRiderMotovlogs i will try, thanks
Thanks for the video.. Question.. Did you have to flash the ECU?
No ecu flash required.👌
@@DarkRiderMotovlogs brilliant thanks..
Hi, i've watched your video 100 times but i cant see how do you disconect the IAP sensor from the top half of the air cleaner box. There is 1 switch but when i remove it, there is also 1 cable still attached to the box preventing me from fully removing the top half of the box. Ps: i changed the air filter but i lost 1 bolt from the box in the motorcycle so i need to do this to find it. I am afraid to ride like this :)
TheBubebodom Hi! as far as I remember there was only 1 plug that I had to disconnect from the airbox to open it up which sounds like the one you have done already. hopefully you come right with your bike and find the screw. sorry I couldn't be of more help.
did you have to remove all the gas from the tank, or you can just remove the tank, even if it's full?
Its best to have very little gas in the tank when lifting it. If its too full then the excess gas with run into the overflow tube and leak out the bottom of the bike. Id suggest having less than half the tank full when lifting it up.
Great bike, first time i've seen an identical setup as my own bike:) you still have it?
Thank you! Unfortunately not :( I sold the GSR and got the CBR 600RR. Then sold the CBR and got my current bike which is the Aprilia Tuono RSV1000.
The GSR was a really great bike and the Leo Vince pipes made it sound even better!
nice video! how to compare to BMC filter ?!
I have a BMC filter in my CBR 600RR now and they perform about the same to be honest. No noticeable difference.
Hi! Is it necessary to empty the tank before doing this?
not really but best if its not very full, less than half is fine.
Made in greece
Chipmonks xD
Le mec bricole avec son casque sur la tête! lol
¡Sé que parezco muy tonto! Jajaja