How to Put a Smooth Bend in Twin and Earth Cable
HTML-код
- Опубликовано: 2 июл 2024
- In this video we look at the skills required to dress and clip twin and earth cable (twin and CPC cable) straight and flat to a surface with a smooth 90 degree bend in it. It is important in the early stages of studying to become an electrician to master these transferable skills.
🔔 Subscribe for more free electrical training videos ruclips.net/user/GSHElectrical?s...
🔵 What is the Minimum Internal Bending Radius for Cable Used in Fixed Wiring According to BS7671 • What is the Minimum In...
🔵What is the Maximum Clipping Distance of Twin and Earth Cable • Video
🔵How to Cut (Make) a Hole in a Surface Plastic Electrical Box and Reinstate the IP Rating (IP4X)
• How to Cut (Make) a Ho...
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Smooth bend in Twin and Earth cable
00:25 - Drag the cable flat
00:56 - How to bend the cable
02:25 - Into the light switch box
03:03 - Clipping the cable
03:30 - Positioning the clip on the bend
04:06 - Equal distance
04:59 - Clipping distances
06:10 - Is it straight
06:41 - Hammering in the clips
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical.
▶️ FACEBOOK / gshelectrical
▶️ INSTAGRAM / brihzmraygdtmjmdb9lunq...
▶️ TWITTER / gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #cable #clipping #electrician
Good technique for the bend, clips , I was tort the clips should be every 8in on a wooden surface and every 6in on brick on concreat , and one 1/2 in each side of the bend and from top the back box .
Whats the recommended way to clip 2 cables running parallel, vertically? Nails on the outside, in the middle or both to the left/right?
Nice clipping . I know this is only a demo video. But it would be nice to see the knockout on the box neatly cut out with a junior hacksaw and not just knocked out any how
How to Cut (Make) a Hole in a Surface Plastic Electrical Box and Reinstate the IP Rating (IP4X) ruclips.net/video/yEi_cx5m7Lg/видео.html
What does all this manipulation do for the conductor thickness itself? We already know it's not a good idea to rip the outer sheath off electrical cables by using one of the conductors as a pull wire to split the sheath.
I know it’s a demo, but that’s a lot of faffing.
1. Measure top and bottom and draw a line with your 3ft level. Use that to make sure you’re straight.
2. Use your hammer as a gauge to measure gaps.
3. Always put the nail on the side you’re hammering from.
If you cannot take your time and get it right at college we are all in trouble - thanks for watching and commenting 👍🏻.
@@GSHElectrical that’s the method I was taught at college.
A real world technique that gets the job done quickly, accurately, and reliably.
There’s no point in teaching techniques that won’t be applied in the real world.
Anyway, it’s a minor disagreement on a otherwise excellent channel.
What I take from Gaz and the Boys is along with the technique is the ESSENCE. In that it is quality of workmanship with tips on how to achieve that. If you have an efficient way that gives the same results, then voila!