[Nephew of Ida] Everything runs great till the moment I tried to make holes in the top case dom. The link maybe in my version 8.0 don't accepted to select the point for the hole. I say great thanks for this video. Although I would design this part different. Without Masterpart and links. I played a little bit with links and I had a lot of problems. I love your videos since years.
I have a big question sir, if we would do this model as CATIA version, are we gonna need a union trim in order to trim corners of the shape? in fact, I am wondering is there any command like union trim on NX to trim faces of solid bodies which is our selection :)
Hi! Thanks for your videos! I have a problem with this exercise and I don't find my mistake... For every action (ribs, screw supports, etc...), I have to create and sketch for each one because I can't do it in the same contour sketch. (Hope I made myself clear, sorry for my poor english). Thanks a lot!!
Good day! Thank you very much for the lessons! This is very useful, especially with assemblies! I have a question. When I try to hide p_casing_master in the assembly, p_casing_bottom and p_casing_top also disappear. What am I doing wrong? I use NX11 too.
Hi, thanks for your model. Somehow you created an "empty" referenceset "part" - so if you switch the p_casing_top reference set to "model" and the p_casing_bottom reference set to "model" then you will see your 2 parts ;) ("replace referenceset" in the contextmenu if you right-click the part)
Hi, sorry there is no 3d pdf in nx. You could use Adobe DC and Tetra 3D PDF convertor. There are some plugins from different companies which you coul use as well.
you are simply our teacher... thanks
:) "Trainer" would be more accurate.
Hi.. Wolfgang, Thanks For this videos to express how to use Geometry wave link & inter parts for casing component..
You´re welcome.
Thank you for this video. Was very helpful for me. Keep posting tutorials for NX! I think I just became your fan :)
You´re welcome. I will do so. Great :)
Thanks You Wolfgang very very nice training
Thanks :) ypu´re welcome-
You are great. Thanks
Thanks :)
[Nephew of Ida] Everything runs great till the moment I tried to make holes in the top case dom. The link maybe in my version 8.0 don't accepted to select the point for the hole. I say great thanks for this video. Although I would design this part different. Without Masterpart and links. I played a little bit with links and I had a lot of problems. I love your videos since years.
Hi, you´re welcome. It is just an exercise, you don´t need to do it like this.
I have a big question sir, if we would do this model as CATIA version, are we gonna need a union trim in order to trim corners of the shape? in fact, I am wondering is there any command like union trim on NX to trim faces of solid bodies which is our selection :)
I did that exercise in catia as well. So please watch that video. In NX there is no "union trim" like the one in catia.
Hi wolfgang u r awesome..can you please upload more surfacing and casting housings with some production rules tutorials...Thanx from India
I will try.
Sir how to make gusset,Ribs, bosses, clips etc paramatriclyon nx pls make video on that.
I will consider it.
Dear Wolfgang Walden,
I seriously consider you have your solidwork with that 11.5 Plastic casing advanced, do you?
I suppose you mean: ruclips.net/video/Gs8CCDtMwbg/видео.html
I finally that! I tried looking for that. Thank you for Tutor.
:)
Hi! Thanks for your videos! I have a problem with this exercise and I don't find my mistake... For every action (ribs, screw supports, etc...), I have to create and sketch for each one because I can't do it in the same contour sketch. (Hope I made myself clear, sorry for my poor english). Thanks a lot!!
Hi, you have to set your curve-selection-filter to : single curve ;)
@@wolfgang.walden.cad.training THIS! Thank you.
thanks
You´re welcome
Good day! Thank you very much for the lessons! This is very useful, especially with assemblies! I have a question. When I try to hide p_casing_master in the assembly, p_casing_bottom and p_casing_top also disappear. What am I doing wrong? I use NX11 too.
Sorry, can´t tell you without seeing your model
Could you help me, if I send you my model? What is wrong? In NX 9.0 - all ok, in NX11 - problem.
Thank you very much.
I will try ;) just send me your model : info@wwmc.de
Hi, thanks for your model. Somehow you created an "empty" referenceset "part" - so if you switch the p_casing_top reference set to "model" and the p_casing_bottom reference set to "model" then you will see your 2 parts ;) ("replace referenceset" in the contextmenu if you right-click the part)
Yes it worked. Thank you very much again! I'm already worn out :)
hai do u no how to pick template in drafting to place in a other diagram in nx
Sorry I don´t understand, maybe you are looking for this :ruclips.net/video/feBIc1W6zbA/видео.html
how to create 3d pdf in nx
Hi, sorry there is no 3d pdf in nx. You could use Adobe DC and Tetra 3D PDF convertor. There are some plugins from different companies which you coul use as well.
Thank you sir.
you are super :) I am türkish...I always watch your drawings.Much info :)
Thx - you´re welcome.
Thank you:=) We found nice.