Tx Costas for this video! Again excellent! Looking forward for your video about mixers! 👍
Год назад+1
Hey good Sir! I've learned so much during this series in the function menu. We have a super powerful feature set at our disposal, amazing. Thank you for the videos, keep them coming. They genuinely makes me happy when I see them pop in the suggestions on my RUclips home screen! 🤓🤓
Hey Costas, Good stuff! I am learning lots of new things. One thing I would like to see you cover in future videos is how to set up rate switches properly. I know this should be simple, but things get complicated when you want to have three rates each for throttle, elevator, aileron and rudder, and you want different rates for each flight mode...
Yeh I can add this to my list of videos... In short you can do this by simply going into the Function curve for say your Ailerons and adjusting the rate value for that curve... You can set it to different rates with different switch positions.
IMO, The programming is easier on PowerBox. You can achieve complex programming in a much more fluid fashion using a lot less steps as compared to other radios.
Hi Costas. Good video again- I’ll be programming up an f5j glider this week using a lot of information from 1/2/3 videos on functions. There’ll be a few differences as I’ll use a slider for motor. Also my stick will be reversed for butterfly (not sure re right or wrong) but I’m doing full forward equals’fast’ same as a motor and back is slow (brake) question- what’s a good way to include elevator compensation? For all modes including brake/butterfly, speed/ thermal etc?
Easiest way is if using flight modes to switch your selected modes. Have you seen my earlier video (Flap deployment with elevator compensation) on this...?
I did not know how to contact you other than making a comment here. Do you plan to make a video which explains how to program PowerBox transmitter when iGyro is connected to regular RX such as PBR-7S which is 7 channel receiver.
Yes...My next few videos will look at how to interconnect things like the iGyro, GPS, Telemetry sensors etc to a standard Rx as well as a PowerBox unit. It will highlight the differences etc.
Hi Costas, not sure if someone else already made this request. But as I am a beginner with the Core, I would like to know your advise on the model setup for a 4 flaps e-glider from start to end. What should I do first and what next in what order. For details you can refer to earlier video’s. I am still not sure that I am doing it right. Hope you can help 😬
Hi Jules... You would first need to setup the functions for all your flight surfaces. Best to raise the same question on the PowerBox forum as many on there are glider pilots and they can provide numerous example files.
Tx Costas for this video! Again excellent! Looking forward for your video about mixers! 👍
Hey good Sir! I've learned so much during this series in the function menu. We have a super powerful feature set at our disposal, amazing.
Thank you for the videos, keep them coming. They genuinely makes me happy when I see them pop in the suggestions on my RUclips home screen! 🤓🤓
Hey Costas, Good stuff! I am learning lots of new things. One thing I would like to see you cover in future videos is how to set up rate switches properly. I know this should be simple, but things get complicated when you want to have three rates each for throttle, elevator, aileron and rudder, and you want different rates for each flight mode...
Yeh I can add this to my list of videos... In short you can do this by simply going into the Function curve for say your Ailerons and adjusting the rate value for that curve... You can set it to different rates with different switch positions.
This radio is so much more powerful than the other brand.
IMO, The programming is easier on PowerBox. You can achieve complex programming in a much more fluid fashion using a lot less steps as compared to other radios.
Hello Costas, really excellent video, very clear explanations. Many thanks for the time taken to do these, much appreciated.
Thanks for this one costas brilliant easy when you know how 😂
Great video. I’ve always setup butterfly with the throttle stick moving the opposite direction though.
Yes, quite a few prefer the opposite throttle stick travel...easy enough to change this.
Thanks Costa, another great tutorial.
Hi Costas. Good video again- I’ll be programming up an f5j glider this week using a lot of information from 1/2/3 videos on functions. There’ll be a few differences as I’ll use a slider for motor. Also my stick will be reversed for butterfly (not sure re right or wrong) but I’m doing full forward equals’fast’ same as a motor and back is slow (brake) question- what’s a good way to include elevator compensation? For all modes including brake/butterfly, speed/ thermal etc?
Easiest way is if using flight modes to switch your selected modes.
Have you seen my earlier video (Flap deployment with elevator compensation) on this...?
Will take a look. Thanks.@@CVHeliPilot
I did not know how to contact you other than making a comment here. Do you plan to make a video which explains how to program PowerBox transmitter when iGyro is connected to regular RX such as PBR-7S which is 7 channel receiver.
Yes...My next few videos will look at how to interconnect things like the iGyro, GPS, Telemetry sensors etc to a standard Rx as well as a PowerBox unit. It will highlight the differences etc.
Hi Costas, not sure if someone else already made this request. But as I am a beginner with the Core, I would like to know your advise on the model setup for a 4 flaps e-glider from start to end. What should I do first and what next in what order. For details you can refer to earlier video’s. I am still not sure that I am doing it right. Hope you can help 😬
Hi Jules... You would first need to setup the functions for all your flight surfaces. Best to raise the same question on the PowerBox forum as many on there are glider pilots and they can provide numerous example files.
@@CVHeliPilot thanx again Costas ! I will raise my question in the forum 👍