selfbuild campervan crafter sprinter | auto trim a sliding door | van build |10| the crafty blinders
HTML-код
- Опубликовано: 6 сен 2024
- Hi and welcome to the channel
In this video I detail how I auto trimmed (carpet lined) my van sliding door, the sliding door is probably the most intricate and detailed panel to trim with 4 way stretch van lining by applying the technique's demonstrated in this video you can trim almost anything so have a go
Parts list:
Camper Van Lining Carpet 4 Way Stretch VW T6 5 Transporter Caddy transit Trimfix www.ebay.co.uk...
#vanlifeuk #vanbuild #selfbuildcampervan #vanbuilds #vwcrafterconversion #sprintercampervan #vwcrafter #selfbuildcamper #vanbuildideas #vanconversion #vanlife #vanbuildstarttofinish #van #camperconversion #campervan #vanconversionbuild #vw crafter #vanbuildseries #sprinter #sprintervan #thecraftyblinders #autotrim
selfbuild campervan crafter sprinter | auto trim a sliding door | van build |10| the crafty blinders
Some great tips here. For the flat door cards I always lay the material dry on top. Then fold back 6 inches. Apply adhesive and then stick. Then peel the opposite way and work it down about 6 inches at a time. Never gets ripples and i can do a pair of rear doors in about 10 mins max including folding over the edges and trimming.
Thank you! Hello from Russia!
Hello kir V nice to have to have you on board
Contributed to the growth of your channel . Well deserved and a great tutorial . Will take all I’ve learned on board when I fit to my sprinter door 👌
Cheers 😁👍
Great vids Sam. Glad you made the point about getting the material the right way round. I found that out the hard way
In all honesty so did I 🤣🤣🤣
HOLA SAM, RICARDO FROM IBIZA SPAIN. ALL YOUR JOBS ARE VERY, VERY WELL DONE. FANTASTIC.
Thank you very much!
15:55 some advice ...let the glue de gas before you stick it down ,wait about 10 seconds
👍
This was an easy subscribe. Down to earth fella with good guidance. Cheers bud 👍👍
😁👍
Now that is an awesome cake!!
It tasted as good as it looked shame it was badged up as a Merc 🤣🤣🤣
Good job with your trimming. Did same to my "weekend warrior" Chevy van conversion and used some leftover parts in my current Iveco Daily L4H3 true 4-season campervan build.
Your experiences about getting bypassing people interested in about build is so true, I've also talked hours with total strangers about my build and even some details!
It's so true most of my conversations lately end with
"what's your channel call again I'm gonna look you up now"
We went to a festival recently and had so many people come over to look around the van
I really appreciate it each time is like a pat on the back know that you have created something that drive total strangers to come and talk to you where normally they wouldn't make the effort
We have a Facebook book group it would be nice to see your creations if you have the time 😁
@@TheCraftyBlindersvanlife I've been shy of Facebook offerings few years now and checking those very rarely.
I've got some Instagram activity tho
@@mhelander send me a link and I'll check it them out👍
@@TheCraftyBlindersvanlife Did you find anything interesting from my build photos?
Found your account today and requested to follow you cant wait to see the build photos
Great work
Thank you 👍
Love the cake!!!
Thank you it tasted as good as it looked
Wow! that is cool
😁👍
Holy cow this is the first time - after watching many many videos and reading many pages that there are two sides to the carpet!!!!! - i have done half the van already now wondering if i put the right side up - thanks mate
I found it strange that it was not mentioned that's why I covered the subject because when you speake to people nearly all.ssy they have stuck some of it down the wrong way at some point in there build
I wouldn't worry to much if you have not noticed anything chances are you have fitted it the right way if not its always something to talk about 😁👍
Subscribed today... I guess I saw all your videos, your van is the most similar to my design, I hope to start building it later this year, I really like the simple way you have to explain and build! keep doing it!! best wishes!
Hi Felipe start your build you won't regret it 😉
Thanks for your comment and kind words
@@TheCraftyBlindersvanlife Hi, thanks to you, you are really inspiring me with your work!!! May I ask you how wide your Van is to fit a bed? I'm 1,84 tall so, I guess my final choice will be on the Fiat Ducato or similar... Best regards!
@@felopg my bed is 190cm x 190cm and very comfortable 😌
Thanks for the video Iv just done my van 🚐 and I enjoyed doing it and like you say what a transformation a bit of carpet makes I can’t believe how you hid your screws 🤔but what happens if you wanted to access behind the panel? I just put a screw cap on the screws and I think it’s looks ok 👍🏻
Hi thanks for commenting to remove the screw I just take my time to locate them and gently lift tge trim to expose the screw head it's a slow process but works 👍
Your idea of hiding the fixing screws looks the way to do it professionally.
It finishes the job off nicely Mick😁
Did you take the door handle off? Can't quite tell in the video. If so how.
Yes we did
Job I still need to do cheers
just seen this comment 😬 sorry hope your well
Just joined your channel ‘ as I’m about to carpet the side door 🚪 I’m now going to watch the video and get some tips.
Ps. Any cake 🍰 left?
Thanks 🙏
🤣 only the figures from the top of the cake are left the rest was dispatched quite quickly 😋
I am new to trying this one door has been carpeted but it has creases how do carpet without please any advice thank you
Any of that cake left ? 😊
It's 3 years old mate I'll have a look🤣🤣🤣
Hello, Sam. How did you finish off the edges of the trim on the Door?
We're about to do the same ons but don't want a naff finish on the edges. Any photos would be greatly appreciated.
Thanks.
Mark.
Hi thanks for this great question
so my brother showed me a trick you put masking tape around the door where you don't want auto trim you spray the adhesive as normal on both the door and the auto trim stick them both together and leave for a little while to go off the with a craft knife trace around the edge of the masking tape and peel away the masking tape with the excess auto trim stuck to it leaving a clean cut edge on the auto trim that's totally stuck down and no over spray on the door paint work to clean off it really works
@@TheCraftyBlindersvanlife Yes…this is an important step…but I am not following it. Mask a nice line where you want the edge of the carpet to be….spray the door…masking tape keeps the adhesive from going beyond where you want it to be…..spry the carpet….and THEN, I am confused….how do you trace around the masking tape as it is now under the carpet ?? What am I missing ?? Thank you for your great video…I am starting this process and just need to understand this step…Nice work !!!
You Only lost """2/3hrs"" chatting?
Nah...I don't believe you Sam.! 🤣🤣
😁🫵
Hi Sam, I’m new to the channel as of yesterday but been binge watching from the start. You’ve done a brilliant job so far on the van well done matey but I just had to post about the birthday cake, did anyone notice the cake had a Merc badge.😁
Ps felt gutted for you about the water leak. I’ll get back to catching up so I’m up to date think I’ve got about 12 to do. Looks brilliant well done.
John you have a good eye sir I saw it straight away but you are the first to mention it, the water leak was a bad day it took weeks to get rid of the smell, wet Kingspan is real fishy odour not pleasant at all, I'm glad to here your enjoying the videos it's been fun to make them however editing is not as much fun but receiving feed back and comments really dose help motivate me so thank you for your kind words
@@AMGMANIAC I think it was done on purpose
💖🎈🎂🎉🎊
its the carpet mate 40 years fitting carpet lol
😁👍
You make me smile. I don't see a like button but dislike is there. Crazy huh?
Thank you 😊 the thumbs up is the like button I think
Sorry hit the thumbs down by mistake thanks for the video
It's OK Tony just make sure you don't do it again 🤣🤣🤣