I'm just an old man now living in Georgia but I'll bet the farm not one of your teachers in school ever said "Homie you will be a great teacher some day if you apply yourself." Most of them probably thought you would be dead by your 25th birthday. You have turned yourself into a Michelangelo of automotive rolling art. You are a 21th century artist and I hope your family and friends appreciate all your hard work along with your customers paying you handsomely for this artwork. Thank you and keep enjoying yourself. PS every time you use the foot shear I feel like jumping through the tv and coming there to grease it and sharpen the edge. Again thanks for sharing all your skill with the world.. Rob
Dude. Your metal work and paint/body is bad to the bone. Your attention to detail is on point. I just recently found you so I’m on board. Good Job sir. 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾. And hello from Deep South Texas.
I'm a french metal shaping enthousiast (but not practicing, for some reasons of room...). I follow many guys in this domain. And I love your way of working ! Not trying to catch directly the shape, not using a lot of english wheel, many, many, many times, like Wray Scheling, or Peter Tommasini (which a love work, also). You go it roughly, the most with pneumatic hammering, hammer and dolly, and at the end, it's perfect ! I think you spend way less times for nearly the same result. Maybe I'm wrong. Amazing job ! And I love your good mood and joyness at work, too ;)
Dang vatos gonna bang and not trim. Haha thats good, it's because they ain't got your engineering artist talents homes! Keep makin this wonderful stuff. The best rides can be had with Bello's Kustoms. We love you brother!!!
I 'v done a little self taught body work since the 70s and found all kinds a factory boo boos . Top side and some side metal around the back up light area was beat together , welded and large amounts of body lead . My 35 Chevy had top joints above the doors in the same area as the Packard and done the same way , beat together and lot's of body lead . Bad welded and leaded areas in my 64 Ford Falcon Futura . They made them look good enough to sell and that's all from all of the factories .
@@BellosKustoms damn i cant believe you answered, you have that spark homeboy keep that up. one day i binged you videos all day with my 10 year old daughter, she already welds and grinds. we watched that one when the car was done at the end of the night....painted chopped and skirted. we both said "DAMN!!!!"
Where did yall find those trunk hinges.?? I need a set for my 47 olds club coupe 66 series I'm always thinking about running no fenders and no hood just a radiator support with some radiator support rods cause I can't find a driver fender.
Is there a limit to the cars you'll do? Like- will you customize anything? Even if it's uh rare and sacred? (personal-wise, I understand taking jobs like that even if it's a special car)
Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam ." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?"
I'm just an old man now living in Georgia but I'll bet the farm not one of your teachers in school ever said "Homie you will be a great teacher some day if you apply yourself." Most of them probably thought you would be dead by your 25th birthday. You have turned yourself into a Michelangelo of automotive rolling art. You are a 21th century artist and I hope your family and friends appreciate all your hard work along with your customers paying you handsomely for this artwork. Thank you and keep enjoying yourself. PS every time you use the foot shear I feel like jumping through the tv and coming there to grease it and sharpen the edge. Again thanks for sharing all your skill with the world.. Rob
“I don’t fuckin know shit” 😂😂😂. The true words spoken by a man that knows exactly what he’s doing.
You don't get to cut up any Packard without A-list credentials. Nice work man. Cheers!
Such a beautiful car , smooth and mean at the same time....Nice work man.
Dude. Your metal work and paint/body is bad to the bone. Your attention to detail is on point. I just recently found you so I’m on board. Good Job sir. 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾. And hello from Deep South Texas.
Some great work homie . Wish I would have found you 3 years ago.
Always a joy to check out your work
I'm a french metal shaping enthousiast (but not practicing, for some reasons of room...). I follow many guys in this domain. And I love your way of working !
Not trying to catch directly the shape, not using a lot of english wheel, many, many, many times, like Wray Scheling, or Peter Tommasini (which a love work, also). You go it roughly, the most with pneumatic hammering, hammer and dolly, and at the end, it's perfect ! I think you spend way less times for nearly the same result. Maybe I'm wrong.
Amazing job ! And I love your good mood and joyness at work, too ;)
Dang vatos gonna bang and not trim. Haha thats good, it's because they ain't got your engineering artist talents homes! Keep makin this wonderful stuff. The best rides can be had with Bello's Kustoms. We love you brother!!!
Simon Holmes
Amazing work! I learned so much watching you do this, no talent to do it, but I did learn. lol
Best in the west. Inspirational
Nice metal work carnal!.....
Look at you work that metal make it look like it's flawless you are the Master ... "Oh no bird"
Gracias homie
5:50 the best chop body work description ever
Sweet, never seen that metal forming tool before, like a portable English wheel. That ride is gonna be sick!
Yeah its a planishing tool, its sick
That is looking so Sweet ! Can't wait for the reveal...,but I will.
I 'v done a little self taught body work since the 70s and found all kinds a factory boo boos . Top side and some side metal around the back up light area was beat together , welded and large amounts of body lead . My 35 Chevy had top joints above the doors in the same area as the Packard and done the same way , beat together and lot's of body lead . Bad welded and leaded areas in my 64 Ford Falcon Futura . They made them look good enough to sell and that's all from all of the factories .
Rad car ,love the metal work..
Looks bad ass!!
props to your video crew too, good job
They're gangsters too
Only way ya learn stuff like that is experience
Coming along real nice homie 😎
😅😅😅 who's your dady?? 😅😅 fantástico hermano y buen trabajo 🤘🏾
Excelente trabajo; magia en las manos y la mente. Saludos cordiales desde Argentina 🇦🇷
The master at work
This vato talented as shit homieee and super funny... shout out from Philadelphia slums homie
Firme holmes. Stay up
Es cool todo 🛠
good work homeboy, new subscriber. whats up from the SF bay area, keep them vlogs coming very motivational!!
Thank you homie
@@BellosKustoms damn i cant believe you answered, you have that spark homeboy keep that up. one day i binged you videos all day with my 10 year old daughter, she already welds and grinds. we watched that one when the car was done at the end of the night....painted chopped and skirted. we both said "DAMN!!!!"
Vídeos with sound that's the way supposed be nice work Carnal
@@cocosloco135148 hell yeah put the sound!!
And no bondo!
MASTER
This vato loco is chingon
Gracias carnal
Been waiting on this one.. looking good! I need some info on ur shop .. want to take my car to you! 1947 fleetmaster coupe.
Thanks homie. Email: mbelloskustoms@gmail.com for biz inquiries
@@BellosKustoms thank you
*23:35**, who makes that tool, and where can we get it, just subscribed....*
go to tricktools.com homie!
@@BellosKustoms
Proud to be your "Homie"
Is it ok to use the weld to create the shape? Will the weld hold over time?
What radio station do you listen to. Love the channel
What is the first car you chopped and how long ago. Great job man
Where did yall find those trunk hinges.?? I need a set for my 47 olds club coupe 66 series I'm always thinking about running no fenders and no hood just a radiator support with some radiator support rods cause I can't find a driver fender.
I have another set for sale. Email me at mbelloskustoms@gmail.com
Mike , what does one of your builds run? Ballpark?
It all depends
Wow man you are an artist with the grinder mike how many years have you been doing this
27
Is there a limit to the cars you'll do? Like- will you customize anything? Even if it's uh rare and sacred? (personal-wise, I understand taking jobs like that even if it's a special car)
What part of California is this guy located at ?
Love your work homie! That is going to be so sexy!
Mrs Richards: "I paid for a room with a view !"
Basil: (pointing to the lovely view) "That is Torquay, Madam ."
Mrs Richards: "It's not good enough!"
Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..."
Mrs Richards: "Don't be silly! I expect to be able to see the sea!"
Basil: "You can see the sea, it's over there between the land and the sky."
Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction."
Basil: "Why?! Because Krakatoa's not erupting at the moment ?"
Where are you located? Couldn’t find you. Your number doesn’t work either. Hit me up.
Located in San Diego, CA. 5 mins from Tijuana. Email: mbelloskustoms@gmail.com
Trips me out how ya put i guess relief cuts in then weld um up is that what ur doin we can't see on TV
WHOS YOUR POPPY CHULO HAHHAHAAHHAHA
YOU CRAY 😜
nice tig wield no Goves niccccccccccccccccce wheelchair larry