You might want to consider making the lower part of your gearbox bracket a T-Section to give it some strength, the two triangles meet in the centre putting all the stress in one point with nothing to stop the lower section flexing. Welding a small lip 90' to the lower brace along its length should stiffen it up nicely. Original part had a box section for strength.
Like the new channel name Mark! Agree about the old name and the band issue, noticed from doing prior searches. Love seeing progress on the M3. Keep Orange Crushing It!
The M3 Is so cool. Back in the day I had a 1987 325i when I was stationed in Germany. It was cool but not that cool. Don’t sweat the fuel tank color. No ones going to see it. As for the cleaning products, I’ve got 7 cars mostly older) so I’m ALWAYS dirty. Thanks!
It's content like yours is why I watch car rebuild vids. I dont want to be sold anything, and I dont care how you spend your money. Please never change
bro, whatever makes you happy I think is fine for us, we appreciate what you do, your effort to get ahead and without clearly leaving aside your growth and professionalism! Greetings from Costa Rica Pura Vida! 🤙🏼
Yet again, Mark, awesome content. Slow and steady wins the race! I would paint the tank black. AS for the cleaner, I would use it to clean the engine bay of my classic Z31.
Looking nice good work as always mark hope it brings you joy bro I know it's your dream car man and I remember you saying something about it being ready by the time you have your wedding in some episodes now I hope it will be liking it man!.. ✨👑✨👍👍👍✨
I raced BMWs for almost 20 years. When you said you were going to change out the rear wheel bearings I just smiled because I have the special tool in my garage (racers change them every season), and guessed that you didn't. The car is coming along nicely, take your time and enjoy the process.
I am not sure if you are aware of this but when viewers like me try to connect to your site using a bookmark from when your site was called Motorhead a message pops and says "This page isn't available" with no mention that your site has been re-named. The only reason why I even knew your channel was still in existence was becuase your newest video showed up on the sidebar as a suuggested video to watch.
@@MotorheadcoMarc I didn’t have any problem, ( I guess as a subscriber? ) your channel just continued over despite the name change and still shows subscriber numbers and the “subscribed” bell symbol etc so no action was required by me.
Marc when you are painting small pre-cast parts prior to assembly it doesn’t hurt to just warm them slightly before spray painting and then they will cure and dry that bit quicker between coats. Just saves you half an hour when reassembling. Loving this build 🙏🇬🇧
Hey Mark, nice progress, looks great, Agree with @James.O below and think that there should be more redundancy built into the mounting point to the body i.e. four securing bolts two each side with the equivalent distance between bolts as per your factory mount.
was in same position as you with the rear suspension which is similar configuration as yours, its quite a handful to push out when you have to balance and operate the press, i not touched it for two months as i am still building my press to push out the bearings, all in between other ongoing jobs, all a bit mad, but i love it
It’s a great project, if hqv probably shot blasted the components and had them powder coated and achieve a flawless finish. Also my ocd would push me to restore the underside of the car too.
Hi Mark. Long time subscriber here. Love your content and your amazing work ethic! I'm rescuing an '86 Z28 Camaro that has been in my family since new. I could sure put that Super Clean care package to good use on this project! Please pick me! Peace.
Hello Mark my son the name is spot on keep it 💯 anyway how are you fella not seeing that much of yuri or Ben now thay have slowed right down with the videos so glad you are still pushing them out and thay are great to the bmw is looking fantastic by the way so we'll done ✔️
Cool video, I quit watching a bunch of RUclipsrs but I always watch MrGonein60, Flint is a very talented man, but I saw you on his podcast so I'm following you again,
Name of channel doesn't mean much to me it's content and steady content is what matters do enjoy watching you and your brothers as well keep up the awesome work
Attaboy Marky! What numbers will M Grande be making? Horsepower and Torque wise? A SuperClean kit would be nice to keep my motorcars in pristine condition. Drive A LOT and am obsessed with keeping my undercarriage components and wheel wells clean
I've been watching you for years mark, it's also a cool name on the channel.. I could definitely use some cleaning products if possible I'd appreciate it
I'd walked away from the screen before the incidents at around the 17:00 time mark. The toilet noise followed by 'O.K number 2' and 'That's how you know you're full' really had me a bit concerned. Name is good BTW.
Man, I'd use that cleaning package for my 2009 Hummer H3T... recently had a radiator blow, which houses the transmission cooler, which then caused the transmission to overheat and blew the pan gasket and both lines... my engine bay is absolutely covered in coolant and the whole underside is covered in transmission fluid from the front bumper all the way to the rear differential... it's an absolute MESS... HELP ME OUT 🤣
And dude I don't know if you've noticed but on the passenger side of that car the door color is way different than the rear quarter panel. It's really noticeable.
Have had no problems finding you what’s in a name anyway enjoy watching you and you family v tune 23 garage you boys are magic
I think for people who weren’t subscribed and didn’t put the .co after
You might want to consider making the lower part of your gearbox bracket a T-Section to give it some strength, the two triangles meet in the centre putting all the stress in one point with nothing to stop the lower section flexing. Welding a small lip 90' to the lower brace along its length should stiffen it up nicely. Original part had a box section for strength.
I like your TY channel name, has a catch to it Mark 👍🏻 gosh that little red M is looking sooooo good. You have to be really excited 👊🏻
Thank you!
Like the new channel name Mark! Agree about the old name and the band issue, noticed from doing prior searches. Love seeing progress on the M3. Keep Orange Crushing It!
The M3 Is so cool. Back in the day I had a 1987 325i when I was stationed in Germany. It was cool but not that cool. Don’t sweat the fuel tank color. No ones going to see it. As for the cleaning products, I’ve got 7 cars mostly older) so I’m ALWAYS dirty. Thanks!
Paint it black.
Paint the fuel tank BLACK.
Unbelievable dude. Just the best looking M3 I've ever seen.
cant wait for the next episode...
My morning coffee with MTECH Thanks Mark! love the OG m3 grille nailed it.
It's content like yours is why I watch car rebuild vids. I dont want to be sold anything, and I dont care how you spend your money.
Please never change
Car is coming together. Stay safe and be well. God bless
Looks legit .. as for the cleaner would use it on everything!!
bro, whatever makes you happy I think is fine for us, we appreciate what you do, your effort to get ahead and without clearly leaving aside your growth and professionalism! Greetings from Costa Rica Pura Vida! 🤙🏼
Yet again, Mark, awesome content. Slow and steady wins the race! I would paint the tank black. AS for the cleaner, I would use it to clean the engine bay of my classic Z31.
Looking nice good work as always mark hope it brings you joy bro I know it's your dream car man and I remember you saying something about it being ready by the time you have your wedding in some episodes now I hope it will be liking it man!.. ✨👑✨👍👍👍✨
I raced BMWs for almost 20 years. When you said you were going to change out the rear wheel bearings I just smiled because I have the special tool in my garage (racers change them every season), and guessed that you didn't. The car is coming along nicely, take your time and enjoy the process.
I am not sure if you are aware of this but when viewers like me try to connect to your site using a bookmark from when your site was called Motorhead a message pops and says "This page isn't available" with no mention that your site has been re-named. The only reason why I even knew your channel was still in existence was becuase your newest video showed up on the sidebar as a suuggested video to watch.
I’m not sure how to prevent that 😅
@@MotorheadcoMarc I didn’t have any problem, ( I guess as a subscriber? ) your channel just continued over despite the name change and still shows subscriber numbers and the “subscribed” bell symbol etc so no action was required by me.
Marc when you are painting small pre-cast parts prior to assembly it doesn’t hurt to just warm them slightly before spray painting and then they will cure and dry that bit quicker between coats. Just saves you half an hour when reassembling. Loving this build 🙏🇬🇧
Just curious when you say bookmark is that in Google or another search engine? I subscribed on RUclips a couple years ago. I haven’t missed a one.
Man Mark that E30 is coming along. Looking forward to the next drop. I like Mtech, I also thought of Mtune. Keeping the brothers together.
The M3 is looking good.
Car is looking fresh Mark. Also the new Channel name is good. Keep up the great content.
Ok thanks!
Keep up the good work Mark.
Thanks, will do!
Hey Mark, nice progress, looks great, Agree with
@James.O below and think that there should be more redundancy built into the mounting point to the body i.e. four securing bolts two each side with the equivalent distance between bolts as per your factory mount.
was in same position as you with the rear suspension which is similar configuration as yours, its quite a handful to push out when you have to balance and operate the press, i not touched it for two months as i am still building my press to push out the bearings, all in between other ongoing jobs, all a bit mad, but i love it
I always use the degreaser to clean my engine bay and the wheelwells and also there is side of the Rims
I like the new name! Keep up the great work. And I love some super clean to detail S2000! 🍻
Excellent work, front end is sick.
It’s a great project, if hqv probably shot blasted the components and had them powder coated and achieve a flawless finish. Also my ocd would push me to restore the underside of the car too.
Hi Mark. Long time subscriber here. Love your content and your amazing work ethic! I'm rescuing an '86 Z28 Camaro that has been in my family since new. I could sure put that Super Clean care package to good use on this project! Please pick me! Peace.
Nice work 🙌 can’t wait to see the m3 finished
I would love some free super clean!! I use that stuff on everything that needs cleaning.
Coming along nicely
😄 I was wondering wtf is an Mtech and when did I allow notifications to it. Cool name dude.
😂😂 thank you
14:44 clear coat it with about three coats or a clear rock chip coating and leave it grey/gray...
Nice project, ol best!
Great new name !! And that Beamer is going to be a super car !!!!!
I would love to have super clean products to clean my vehicles and garage.
Great video Mark thank you!
Love the name,suits you an the channel,much respect from New Zealand 👊
I like the mteck I also like how you show how to fix the vehicles
Hello Mark my son the name is spot on keep it 💯 anyway how are you fella not seeing that much of yuri or Ben now thay have slowed right down with the videos so glad you are still pushing them out and thay are great to the bmw is looking fantastic by the way so we'll done ✔️
Thank you, and they’re doing good 😁👍
Cool video, I quit watching a bunch of RUclipsrs but I always watch MrGonein60, Flint is a very talented man, but I saw you on his podcast so I'm following you again,
Name of channel doesn't mean much to me it's content and steady content is what matters do enjoy watching you and your brothers as well keep up the awesome work
That colour paint on the diff cover will grow on you, it, in my opinion, looks much better than too shiny silver, thanks for the content
Great name for a knife too.... :) Can't wait to see that M rip.
I'd use it on my crazy high horsepower M52B28 E39 BMW!!
Great name in my opinion it suits the car project. Keep up the great work and keep the content coming!!
Attaboy Marky! What numbers will M Grande be making? Horsepower and Torque wise? A SuperClean kit would be nice to keep my motorcars in pristine condition. Drive A LOT and am obsessed with keeping my undercarriage components and wheel wells clean
I will use the super clean for my truck
Sound good the new name
Great video. Love the new name 👌🏻
Congrats Mark on the new channel name. The E30 is looking great. Keep up the great work
Thank you
Pretty good welds to me
I've been watching you for years mark, it's also a cool name on the channel.. I could definitely use some cleaning products if possible I'd appreciate it
Keep up the good work
i know how you feel im just stripping my eclipse rear suspension down to replace all rubber
That red looks super clean nice mark👍👍
Good name
Good name. Only the logo could be more flashy
Working on hat
I'd walked away from the screen before the incidents at around the 17:00 time mark. The toilet noise followed by 'O.K number 2' and 'That's how you know you're full' really had me a bit concerned. Name is good BTW.
That was not my intention at all 😅
We can’t do things like this anymore in Australia they have the slightest bit off damage the are scrapped
Nice !! Like the name
Mtune. I really like your channel , I started watching after you painted vtunes blue stang.. great work boys....
You should of used super clean products on that gearbox to get it clean
Very nice! And I like the channel name.my little buddy
This is going to a great car
The M3 is looking sharp. You purchased a SECOND one ?
Great video
Old school m3😊
I hope you kept the original engine with the matching numbers for a future auction!
I think this car came without the engine
Unfortunately it didn’t have an engine or else I would have 😁
Man, I'd use that cleaning package for my 2009 Hummer H3T... recently had a radiator blow, which houses the transmission cooler, which then caused the transmission to overheat and blew the pan gasket and both lines... my engine bay is absolutely covered in coolant and the whole underside is covered in transmission fluid from the front bumper all the way to the rear differential... it's an absolute MESS... HELP ME OUT 🤣
Hi Mark I think there is another trim between the bumper and metal grille missing.
Yea I have it, the bumper is not buttoned up yet 😁
Love your channel!
Hey Mark, maybe you should do a dry ice cleaning underneath when you finish?
I’d love to but it’s very expensive 😅
@@Motorheadco I'm not saying to buy the equipment but to take the M3 to one of the shops that can do the cleaning for you.
Paint the gas tank black. Its gonna look better when u do
Mtech, I like It! 👍
The name seems good brother
😁😁
love the name
👍🏻👍🏻👍🏻👍🏻👍🏻nice name
I do like the name my friend ❤
This car needs a underside full restoration, u should do this as the next phase 👍
Not a bad idea
Cool name bro🎉
Great stuff thanks
I would use the Super Clean degreaser on my Hair.🤣
do the underside like the mustang
like the new name
Did you have to purchase E30 M3 doors? Or did you create your own lower panel to match with the fenders and quarters?
new name dude ? tnx for the video
Yessir 😁
Ok, no more motor_head garage. Mtech works!!
HI Awesome video 👍
Finally the name change !
😁😁
Liked the Motorhead RUclips channel name myself....
I wood love some super clean I wood clean a rv
You might as well paint the gas tank to match the bottom of the car
And dude I don't know if you've noticed but on the passenger side of that car the door color is way different than the rear quarter panel. It's really noticeable.
I like it 👌
❤❤❤❤❤❤
I like the name Mark
🎉❤
💪😎👍
I suppose "greasemonkey" was taken. 😂😂😂 Just kidding, we not here for the name, but the content!
Ever thought of Marc Motorhead?
Too long in my opinion
Where's my Ace of Spades? Your not Lemmy, wow we used to be a society 🤣
M=Tech is a Cool name Mark.