How to REMOVE & REPLACE Faded Ford DECAL (tailgate or rear hatch)

Поделиться
HTML-код

Комментарии • 110

  • @weeyins2741
    @weeyins2741 2 года назад +3

    I just pulled my badge off. I parked the truck in the sun for about 5 minutes and then started to peel it with a squeegee similar to the one in the video. Once I got it off there was a bunch of glue left behind - like in the video. I used the heat of the sun and folded it back into itself just using my fingers. It all ended up in a ball and that was it - perfect! No scratched paint. Thanks for the video!!!

  • @SchutzReborn
    @SchutzReborn 3 года назад +10

    I've watched hundreds of car videos and your the first I've ever seen to cover plates and not in post. That's very smart and a huge time saver.

  • @lorenwilkie4088
    @lorenwilkie4088 3 года назад +31

    Sanding it will bond the adhesive really well. But it will make it harder to remove later on when you want to do it again.

    • @Marco-fi6gv
      @Marco-fi6gv 3 года назад +9

      It really isn't necessary.

  • @gssixgun
    @gssixgun 2 года назад +5

    Your vid was simple and straight forward, my rear emblem was pretty much the same and came of pretty easily. Getting the excess glue off was easier to just heat and roll with my fingers, gentle heat let me roll it without burning my fingers.
    Used just 91% alcohol to clean up the residue and replaced it WITHOUT sanding
    Thanks for your hints

  • @davidkapellas9197
    @davidkapellas9197 3 года назад +6

    Thank you, just bought a replacement emblem and had no idea how to put it on. Really helpful.

  • @carlosciruelos
    @carlosciruelos Год назад +1

    Excellent video - well filmed, with clear explanation of each step. Links to each product that you purchased will make this any next project. Thank you!

  • @bmanh2355
    @bmanh2355 4 года назад +33

    All u need is heavy monofilament fishing line. Snake it behind the decal which is held on with 3m VHB tape. Then “saw” the line back and forth behind the decal. Then remove any remaining adhesive with wd40

    • @motoforlyfe
      @motoforlyfe  4 года назад +4

      Thanks for the tip! I'll give it a try on the next one.

    • @davemoen6323
      @davemoen6323 4 года назад +4

      Bman H - You are right on the money with the WD40! Works good and most people have it. Thanks!

    • @Mike-xh9kn
      @Mike-xh9kn 2 года назад +1

      If it were only that easy using fishing line😑

    • @martincraig2013
      @martincraig2013 Год назад

      The tabs would cause a issue

    • @richardortiz8704
      @richardortiz8704 Год назад

      I hate Fords

  • @JabboRemus
    @JabboRemus Год назад +1

    Thanks for the video. Will be removing my emblems soon for obvious reasons. Can't afford to sell so this is next best thing.

  • @locooreo5022
    @locooreo5022 4 года назад +6

    Definitely going to replace my old emblems now !! Super helpful, thanks !!

  • @bobzak9508
    @bobzak9508 2 года назад +3

    Use some high tensile fishing line works too!!

  • @randyphelps3041
    @randyphelps3041 2 года назад +3

    good one. I was able to do without heat gun. Thanks for the help! Appreciated!

  • @aserta
    @aserta 4 года назад +4

    You can also use lighter fluid to clean the residue. Also, if you can touch the inside of the skin where the emblem is, even with a stick, it would be recommended to push against it so that the metal grabs on better. Unsure how this tailgate is vs say a hatch back door.

  • @Zuleva_Official
    @Zuleva_Official 2 года назад +1

    IPA and a rag works really well with getting the glue off as well if you want a cheaper option

  • @HtownKurt
    @HtownKurt 2 года назад +1

    Good video, plan on changing my emblems to black on my Expedition. Thanks

  • @mikebortzel175
    @mikebortzel175 5 месяцев назад

    Much easier than I thought. Thanks! 3:35 p.m. 6/19

  • @jeremiahyoung5931
    @jeremiahyoung5931 4 года назад +3

    Hey thanks a lot for doing this video. I'm repainting my tailgate to get rid of some rust spots before they get too corrosive , and I was wondering what to do about the symbol. Now I see its not too bad to remove that I will order that. Thanks again appreciate it.

  • @hydraulics
    @hydraulics 3 года назад +1

    When emblem off- spray a can of krown or fluid film into that tailgate if you live in the rust belt

  • @noelturner2875
    @noelturner2875 2 года назад +1

    Hey thanks. About how far away did you hold your heat gun when you were melting the adhesive to remove the emblem.

  • @nashguy207
    @nashguy207 4 года назад +6

    Good job buddy. You going to have that truck looking new again if you keep replacing everything. LOL A tip I have done in the past on some emblems and other things attached with 2 sided tape is dental floss to remove them kind of use it like a saw between the mounting surface and the tape it does a pretty good job. Have a great week!!!

  • @sussy120ms9
    @sussy120ms9 3 года назад +1

    My guy you sound like Paul Walker, damn missed already, and thanks for the tutorial man

  • @frankiekupiec4762
    @frankiekupiec4762 Год назад

    Hello, Thank You for the Video - Am very pleased with My Results...Love My Ford RANGER

  • @bertdowns5240
    @bertdowns5240 3 года назад +1

    Don’t you worry - That Ford Glue is tuff stuff.

  • @michaeldickmeyer493
    @michaeldickmeyer493 2 месяца назад

    Have the emblem that was ready to fall out, came off very easy. What is the glue/sticky stuff to put it back. My emblem is basically new, just need the backer. Saw 3m VHB tape?

  • @TheBradinator214
    @TheBradinator214 Год назад

    Awesome, looking to do this on my Ford Ranger so this helped a lot? I'm also wanting to upgrade my tires and rims. What size do you have on yours?

  • @johnmac4769
    @johnmac4769 4 года назад +1

    Good job, looks great. Need to do the same to my F250

  • @angelfigueroa1467
    @angelfigueroa1467 4 года назад +1

    Thank you for the lesson, great job!

  • @anonymousnoname1889
    @anonymousnoname1889 3 года назад

    Fantastic job/ video... end result is fabulous

  • @colinmacdonald7603
    @colinmacdonald7603 3 года назад

    I have a faded plate just like yours and a picked up a replacement on marketplace for cheap ...downside it doesn't have the sticky plate ... can I use the old logo inner plastic adhere plate with the new logo cover i have and glue it ?? any advice would be appreciated

  • @Arcturian1111
    @Arcturian1111 Год назад

    Hi, My original one came off. What do I use (glue etc) to adhere it back on again.

  • @chrism7411
    @chrism7411 3 года назад +2

    The sanding isn’t necessary at all. But looks good

    • @Redneck_Ed
      @Redneck_Ed 3 года назад +2

      Yeah, I thought the same thing. That old adhesive was stuck to the tailgate way better than to the emblem. So if sanding increases adhesion to the tailgate, your weak point is still on the emblem side. I pulled mu emblem off with no heat either. Just pulled right off.

    • @chrism7411
      @chrism7411 3 года назад

      @@Redneck_Ed yessir mine didn’t need heat either

  • @gw5309
    @gw5309 3 года назад

    Great video. Denatured Alcohol is my go to goo and glue cleaner.

    • @froglobster
      @froglobster 3 года назад

      What is denatured? So you get it from parts store or hardware?

  • @lori4782
    @lori4782 3 года назад

    So can I do this also to the side Emblems? Yours is the first video where you did not take nothing apart, like some videos took the tailgate apart to take emblem off.

  • @Kyle-mf5kd
    @Kyle-mf5kd 4 года назад +1

    If you don’t mind telling, where can I find those fender flares?

  • @Obscamping
    @Obscamping 3 года назад

    Ford finally did something right with the new 2021 trucks, it’s on the front grill, they circled the problem

  • @Michael-gs5ex
    @Michael-gs5ex Год назад

    Is it the same way for a front emblem?

  • @ruthglass3103
    @ruthglass3103 2 года назад

    How do you put the tin emblem back in to the casing. But just fell out

  • @christinedaulizio5994
    @christinedaulizio5994 3 года назад

    this vidoe was very helpfull. Tks.

  • @28daballa
    @28daballa 2 года назад

    Are the new badges plastic or aluminum?

  • @stevensimons.soss1
    @stevensimons.soss1 3 года назад

    Brilliant vidio, many thanks ive just changed mine 😁

  • @EddieMaxwell-hb6cp
    @EddieMaxwell-hb6cp Год назад

    Where to get emblems

  • @lewcore
    @lewcore 3 года назад

    great job friend!

  • @adriansolis2787
    @adriansolis2787 2 года назад

    NICE JOB....FORD TOUGH!!

  • @JustinKruger336
    @JustinKruger336 3 года назад +2

    Cool I never knew it had screws, mine is a small old ranger with a small logo on the right side I dont think it has screws. At least ford uses good glue my logo is pretty worn out it's a 1997 but I'm gona wait till it completely fades or cracks or falls off lol btw your supposed to push pressure on any logo for at least 1 min and do not let it get wet for 48 hours the same for stickers.

    • @froglobster
      @froglobster 3 года назад +1

      Thanks, didn’t know about pressure time nor 48 hours

    • @JustinKruger336
      @JustinKruger336 3 года назад +1

      @@froglobster they often have instructions and many websites you order stickers or Plastic hood ornaments from also say it on the website and lots of glues do to and paint.

    • @froglobster
      @froglobster 3 года назад +1

      @@JustinKruger336 k thanks

  • @djchromick5464
    @djchromick5464 Год назад

    👍 thank for the video

  • @weeyins2741
    @weeyins2741 2 года назад

    FYI: Link to emblem on amazon doesn't work

  • @Adam-gi1yl
    @Adam-gi1yl Год назад

    Nice video 📹 👍

  • @blackscotydog
    @blackscotydog 3 года назад

    Thanks for this I have the same truck!! even same color.

  • @regsparkes6507
    @regsparkes6507 4 года назад +1

    It's good to see how to remove and replace these emblems,..Thanks!

  • @UberKrispy
    @UberKrispy 2 года назад

    wonder if a hairdryer would work as good as the heat gun.

    • @dwwmoon
      @dwwmoon Год назад

      I used a hair dryer on my front emblem. Would not sand the paint. Use a good paint compound then alcohol it.

  • @jonas4jonas4
    @jonas4jonas4 Год назад

    Fishing line works well to get the emblem off

  • @aptopowerup
    @aptopowerup 4 года назад

    what kind of shell do you have on your ranger?

  • @fawnbutler9158
    @fawnbutler9158 3 года назад

    EXCELLENT THANK YOU GOD BLESS YOU 🙌 🙏

  • @philippittman6664
    @philippittman6664 2 года назад

    Emblems link not available, anyone know of sure replacement part?

  • @criticalnewstvcriticalanal2495
    @criticalnewstvcriticalanal2495 4 года назад

    Well done, thanks, i will try it tomorrow

  • @TrentonWilliams34250603
    @TrentonWilliams34250603 4 года назад

    Gonna try it today

  • @MoisesAlducinLinthwaite
    @MoisesAlducinLinthwaite 3 года назад

    There was no need sanding area!

  • @elcuby
    @elcuby 2 года назад

    The link is not working 😩

  • @JustMike2791
    @JustMike2791 3 года назад

    Just asking, why cover the license plate? No one besides a cop has access to the ANY of the information on a license plate.
    I have an '06 F150 that I'm looking for the gen of F150 that uses the 9" oval that is three pieces so I can take it apart and paint it. I'm murdering the truck except for some accent pieces

  • @krisanderson4352
    @krisanderson4352 4 года назад

    Do u think since it's so cold out that it may have been a good idea to heat the surface and the emblem ???

  • @chriholt
    @chriholt 4 года назад

    Looks good!

  • @epiclink11
    @epiclink11 2 года назад

    I was looking at these emblems for sale on amazon and one of them uses screenshots from this video in their instructions lol

  • @SiemReap2012
    @SiemReap2012 4 года назад

    I went on to your website. Couldn't find this part.... help?

    • @motoforlyfe
      @motoforlyfe  4 года назад

      Thanks for the heads up! Here's a new link: amzn.to/3lehPtF

    • @hydraulics
      @hydraulics 3 года назад

      @@motoforlyfe that link dead too now. Got a part #? Thanks for the video

  • @thatalaskaguy
    @thatalaskaguy 3 года назад +2

    I refuse to replace mine. I like my Ford truck but they should provide replacement emblems for free.

  • @daddone92
    @daddone92 3 года назад

    Secondo te su la Kuga è ugualmente attaccato ..?!

  • @quentinh4316
    @quentinh4316 3 года назад

    Awesome

  • @marcsongaudin8429
    @marcsongaudin8429 4 года назад

    What about I don't have a heat gun?

    • @AJannace11
      @AJannace11 4 года назад

      Fishing line works well too

    • @froglobster
      @froglobster 4 года назад +2

      I did with hair dryer

  • @DriveShaftDrew
    @DriveShaftDrew 4 года назад

    thumbs up shared looking good great job

  • @qwertshadow
    @qwertshadow 3 года назад +1

    but it still says Ford..

  • @samsh0-q3a
    @samsh0-q3a 4 года назад +1

    Wouldn't Goo-gone be safer instead of lacquer thinner? That stuff is great when you need it.

    • @motoforlyfe
      @motoforlyfe  4 года назад

      This was some tough stuff, not sure if goo-gone would have cut it!

    • @rpfleger2560
      @rpfleger2560 2 года назад

      I used goo-gone, but still had to scrape a lot. Overall, the glue removal took about 10 minutes.
      The key to the removal of the emblem was most definitely the heat gun. I first tried without it, and then watched this video. The heat gun was like $25 and worked like magic!

  • @autobotavengerfireballxl5339
    @autobotavengerfireballxl5339 3 года назад

    minus the sanding step and your good bud

  • @BryceCzirr-jz7ju
    @BryceCzirr-jz7ju 7 месяцев назад

    Just use fishing wire and floss it up and down until it comes off, and rubbing alcohol to clean. You are making this way harder than it needs to be.

  • @yogirlbreea5989
    @yogirlbreea5989 3 года назад

    The emblem came off but the rest of it didn’t. 😭😭

  • @jameskramer9964
    @jameskramer9964 4 года назад

    Hey bud you said you were going to put the email address for the Ford symbols I don't see it any chance you can send it to me or put it on here.

    • @motoforlyfe
      @motoforlyfe  4 года назад

      Here you go! amzn.to/2LFHkEm

  • @ancientheart2532
    @ancientheart2532 4 года назад

    Scotchbrite pad would be better I think.

  • @connorsimons280
    @connorsimons280 9 месяцев назад

    Job well done brother, I was just gonna try to rip her off lmfao.

  • @thisguy8967
    @thisguy8967 4 года назад

    👏🏽👏🏽👏🏽👍🏽

  • @alienpick1
    @alienpick1 4 года назад

    Jesus Christ is Lord ✝️ Maranatha

  • @ancientheart2532
    @ancientheart2532 3 года назад

    Tape it off!

  • @seanlamonte1402
    @seanlamonte1402 14 дней назад

    Why is emblem so cheap and fake?

  • @kevinwalsh2513
    @kevinwalsh2513 Год назад

    $15 for 2 Amazon, you bought fake rubbish that won’t last. Ford uk sell for £29 each. You’ll be changing again soon. 😂

  • @mrkillemall99
    @mrkillemall99 4 года назад

    Do you know if it is the same process for the emblem with the back up cam on it?