Can I Use a Flux Core, Gasless MIG Welder for Auto Body Work?

Поделиться
HTML-код
  • Опубликовано: 21 ноя 2024

Комментарии • 990

  • @philiphartley8823
    @philiphartley8823 4 года назад +235

    I've been using flux core Mig for vehicle repair for twenty years or more and had no problems at all. My advice would be to always make sure to get good quality wire and keep the tips clean. I personally remove the gas shroud from the torch as it's not needed and enables a better view of the weld area. Another great advantage is if welding has to be done outdoors, a gas version is not much use as the gas disperses too easily.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +16

      Thanks so much for the tips - you're right about using the gas outside as just a tiny bit of wind = crummy welds.

    • @joeanon5788
      @joeanon5788 2 года назад +11

      I second that emotion. I have a CE 125 also and works great with small /thin materials. I take night weld AWS classes at the local HS Tech school. 12 week course each year when offered. I wish they went year round. I learn something new each year, and my welding improves in leaps and bounds. I have a small home setup also. PlasmaCut 40 Amp, horiz band saw, CE125 FCAW, and a CE 225 SMAW (will also do TIG, but not ready for that yet). Grinders, clamps, etc. I can do a many things with my setup. Very handy.

    • @JoeKova01
      @JoeKova01 2 года назад +5

      Nozzle gel is a must!!!

    • @ziemelbriedis
      @ziemelbriedis 2 года назад

      @@JoeKova01 how?

    • @FOOKyourFEELINGS
      @FOOKyourFEELINGS Год назад +3

      I only have a 100 amp one, would this still work?

  • @davidiannelli5827
    @davidiannelli5827 3 года назад +40

    Super helpful for this beginning welder with a truck project in his future. I’ve been obsessing about the need to get a gas bottle and thanks to your videos, I realize I don’t need one. Your videos are right up my alley for the work I need to do, so thanks for making them!

    • @LakesideAutobody
      @LakesideAutobody  3 года назад +6

      You're welcome - glad you appreciate them. Just takes a bit of practice and you'll have it. Maybe practice on some 16 gauge metal first - then move to the thinner 20 - 22 gauge for todays cars.

    • @John-NeverStopLearning
      @John-NeverStopLearning 7 месяцев назад

      I am no TIG,MIG, STICK welder. I purchased the HF TITANIUM Unlimited 200 about 2 years ago. I just finished a mower deck repair. DON’T Be afraid of trying. Patients and some practice will get you a long way.

  • @greasemonkeychef
    @greasemonkeychef 4 года назад +30

    Great video. I'm currently replacing rusty floor pans in a 1967 Mustang. I'm new to welding so your instructions are exactly what I needed.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +5

      That's great to hear. If you have any questions feel free to ask. This seam sealer works well for me. It's like what the factories use on their lap joints and other seams: www.amazon.com/ACDelco-10-2013-Joint-Filler-Compound/dp/B007Q0ZQGK

  • @carlcanterbury7091
    @carlcanterbury7091 4 года назад +58

    I appreciate that your content points to those of us that have the need, but not the expensive tools. It’s nice to see things done with what we might have or for a one off repair.
    Pleas keep up the good work.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      I'm glad you enjoyed it - I will continue to make videos in the same style. Have a great weekend. Jerry

    • @gergemall
      @gergemall 3 года назад +2

      Thx Jerry, you've been helping me learn tons. I think this weekend I break out the welder I bought a year plus ago and figure it out SAFELY >

    • @gergemall
      @gergemall 2 года назад +1

      Agreed

  • @jossuedepalm3549
    @jossuedepalm3549 4 года назад +54

    This is awesome i have a mig welder and still don't have Co2 so i'm using fluxcore for body work and it works great, good job, God bless you

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +4

      God bless you too - it's not perfect for everything auto body but it will suffice :)

    • @jossuedepalm3549
      @jossuedepalm3549 4 года назад +2

      Amen! I most deffinetly think so too

    • @6lr6ak6
      @6lr6ak6 4 года назад +1

      Man, l don't know how you're using it for car body coz normally you gotta use 0.6 with argon mix

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +5

      @@6lr6ak6 Gas is easier for sure but just wanted to make a video on this because a lot of folks were asking if it is possible to use flux core for auto body. Have a good weekend :)

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      @@jossuedepalm3549 Thanks for the comment and support - have a good week end :)

  • @adeh503
    @adeh503 4 года назад +130

    This is a great video... There's a lot of welding snobs out there, but this down to earth video aimed at us hobby guys is perfect, thank you, you've just got another subscriber 👍👍

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +10

      Thanks for the support - there's no welding snobs in an actual body shop. Never heard one guy brag about how well he could weld - it wasn't even a thing - never even thought about it. Thanks for the support and the sub - feel free to ask any question / any video. Jerry

    • @johnmichaeltwist5086
      @johnmichaeltwist5086 3 года назад +2

      I have this welder. It needs a DC conversion for negative electrode otherwise it splatters BB's and the quality is not so good. The flux core wire is meant to be used with negative electrode, however this is an AC setup. The conversion would cost additional ~$30 - 50 . I suggest consider seeing the conversion videos before making a decision of this welder. I will convert mine since I've had it for ~10 years, however it may make better sense to by a DC flux welder for someone who is starting out.

    • @jimmypopp2695
      @jimmypopp2695 3 года назад +3

      @@LakesideAutobody Agreed. I have two cylinder gas welders, six cylinder gas welders and a Miller 140 but I love my little harbor freight for sheet metal work. It hardly if ever blows a hole in anything.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад +2

      @@jimmypopp2695 That' great to hear - I was really surprised that it actually worked this well. I've always used Miller MIGs and love them but for the price, you can't beat this welder. Thanks for the comment and support :)

    • @jimmypopp2695
      @jimmypopp2695 3 года назад

      @@LakesideAutobody Are you guys in New Jersey?

  • @boomdawg56
    @boomdawg56 3 года назад +6

    I bought a similar cheap 125 from Harbor Freight about 15 years ago. Still have it, still use it. I have welded motorcycle frames, exhaust systems, body panels, just about everything you can weld on a car or motorcycle. I had never used a wire feed before purchasing this welder, you are so right about playing with the settings for wire feed and power. I would recommend a flux core welder from HF for any hobbyist. There is no doubt that a Miller or Hobart is a better welder but $200 versus $1500 or $2000 or more. Great video.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      Thanks the the input and support Boom Dawg. You're right too about the 200 vs 1500-2000 too. Have a good weekend :)

  • @daxinventor3542
    @daxinventor3542 Год назад

    I used a WeldPro 155 for the first time today. I am repairing my rocker panels on my truck. I am saving about $4,000 by doing it myself. I have been watching Lakeside Autobody videos on RUclips at night learning different sheet metal patch panel techniques. I think I am learning how to make my own sheet metal patch panels thanks to these videos. Thanks Lakeside Autobody. I am grateful to you.

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      You're welcome Dax - feel free to ask any ?s as you go - I get to them 1-2 times a day :)

    • @MrTheHillfolk
      @MrTheHillfolk Год назад

      No doubt man, I was here for the bodywork and filler type stuff for a project I'm working on.
      The bodywork is semi done for now,and I've saved a couple of rust cars from death with lots of welding patches.
      To me the patching and rust repair isn't bad and I can do pretty good at it but I'll still watch these vids for pointers and refreshers.
      I'm definitely more confident with this stuff than getting body lines straight and all.

  • @drizler
    @drizler 4 года назад +68

    I’ve got a real mig And all I’ve ever heard is you can’t weld automotive sheet-metal the flux core. Sure it’s cleaner and a bit nicer but that’s all. Big help with gas welding is if it’s cold out and you’re welding inside you don’t get the fumes issue.
    If it gets dicey and you’re burning through you can always crash a piece of three-quarter inch copper water pipe and hold that on the back side while you’re welding. It’ll suck up a lot of the heat and keep you from burning through. I keep a piece of flattened pipe hung on the wall for those instances.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +3

      Thanks for the tips - good information :)

    • @barbarasteed3966
      @barbarasteed3966 4 года назад +2

      Carbon block will work as well as alum.

    • @jasonbirch1182
      @jasonbirch1182 4 года назад +2

      Yeah ive used copper pipe for a "spoon" backer while filling in exhaust pipe that I had split and expanded to go from 2"-2 1/2" . It worked great. I was able to bridge the gap then stitch it together. I just got a Tig machine ordered, can't wait to start getting into it.

    • @glock21guy
      @glock21guy 4 года назад +6

      It depends. These were lap welds. Butt welds are about impossible to not blow through. Well, you have to be a lot more careful and short with the bursts anyway, or use a backer.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      @@glock21guy
      Here's a video that may help with that. ruclips.net/video/iznc9CCtZnw/видео.html

  • @terrybi
    @terrybi 4 года назад +2

    My flux core welder doesn't have that guide chart so I quickly wrote the recommended settings down, thanks for showing that.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Great. I'm glad I included that. Have a good weekend :)

  • @jessejohnson159
    @jessejohnson159 4 года назад +10

    'IF' that splatter protection spray is used, most the BB's will brush right off. Lacquer thinner will remove the remainder of the spray for any paining that you properly prepare for with sanding, etc.

  • @elmarko9051
    @elmarko9051 Год назад +2

    Thank you RUclips algorithm for pulling up this excellent video. Lots of gems in this video - technique, proof of method, real-world results. Hearty thumbs-up. Got some unibody I want to weld. Thinking that the flux-core is the way to go. Initially thought stick - but too steep a learning curve and I won't be welding all the time.

  • @brianst.laurent2165
    @brianst.laurent2165 3 года назад +8

    I started out with an older version of this same flux mig welder then upgraded to the titanium 125 flux mig welder (also sold at harbor freight) and man, what a difference. I like the titanium 125 SO MUCH MORE. You get more control of the heat (not just “high” and “low”) and that make for much better welds.

    • @johnb5640
      @johnb5640 3 года назад +2

      So true!! Glad I went with the Titanium!! Not only for the reasons you mentioned,but it also welds in DC as opposed to AC which is so much smoother!!! I love that little machine!! Definitely worth the extra $90 or so!!!

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      Thanks for the information - Happy New Year :)

    • @johnb5640
      @johnb5640 3 года назад +1

      @@LakesideAutobody Happy New Year to you as well! Thanks for the vids keep em coming!!

    • @oscarmunoz1918
      @oscarmunoz1918 3 года назад

      Hd§h

  • @kdb7670
    @kdb7670 Год назад +1

    This is exactly the answer I needed. I have a lot of body work fixing rust on my 65 mustang and complete beginner welder here. I feel confident I can make the crusty broad look good again!!

  • @SamFBM
    @SamFBM 3 года назад +16

    used this type of cheap welder for my mr2 sills. did pretty good although i was a noob i managed to make it pass MOT (uk version of inspection but way more strict)

    • @Eddiedoherty22
      @Eddiedoherty22 2 года назад +2

      Exactly the comment I was looking for. My Sils are rotten. Thanks.

  • @SamTheBalloonMan
    @SamTheBalloonMan 3 года назад +1

    I have this same welder and my 1950 Chevy sedan delivery needs some repairs. Now I feel confident that this machine can do what I need it to do!

  • @genesssisss
    @genesssisss 4 года назад +7

    I been using flux core welding on body work fo like 16 years.. I love this welding machines

  • @tonywall8991
    @tonywall8991 2 года назад +1

    I've been using a gasless mig for years on cars and trucks, never had a worry.

  • @michaelwagner8798
    @michaelwagner8798 4 года назад +16

    I am doing this exact type of work right now and am very new to it. Thank you so much for the video

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +3

      You are very welcome - glad you could use it :)

  • @smokerise
    @smokerise 4 года назад +52

    You can use any process...the finished product will depend on how good you are with a grinder.

    • @MissionRestomod
      @MissionRestomod 4 года назад +1

      Smoke Rise a grinder, a hammer, a dolly, a torch and wet rag to quench... Its just a lot more work to get the same results as a better welding rig. Of course it can be done but will take longer and take more effort.

    • @smokerise
      @smokerise 4 года назад +3

      @@MissionRestomod I agree, for the most part...if I was welding thin gauge metals flux wouldn't be my first choice but if that's all I had I could get it done.
      A lot of diy'ers might have a little 110 buzz box in their shed, with flux wire...
      Even with solid wire, with a better machine, you would still be using everything you mentioned.
      It all depends on if you want to do it yourself, or pay someone like you, or me to do it.

    • @rocketman702
      @rocketman702 4 года назад

      Um, No!!

    • @smokerise
      @smokerise 4 года назад +3

      @@rocketman702 whatever man

  • @bjornlillpers498
    @bjornlillpers498 4 года назад +30

    Thanks for this, now I feel a little more comfortable getting a non-gas welder. I really can't afford one with gas, they're at least 5 times more expensive where I live. Doing a full restoration of my childhood's Volvo wagon and it needs some welding, and I've always wanted to learn to do it myself.

    • @jarmen1105
      @jarmen1105 3 года назад +7

      I taught myself through RUclips videos. Just welded a roof onto a VW Bus. Used a combination of gas and flux core. I like the flux core for tight areas as you can hit it from some distance. But gas better with thin metal areas.

  • @superdragon9293
    @superdragon9293 Месяц назад

    I just did the quarter panels on a 66 Mustang Coupe and i must say the job came out fantastic and i have had that same welder for bout a year now. My regular thing is doing exhaust systems and i gotta say this welder has paid for itself 10xs over...😊

    • @LakesideAutobody
      @LakesideAutobody  Месяц назад +1

      Thanks for your input Super D - thanks for watching too :)

  • @stevenstevens9191
    @stevenstevens9191 4 года назад +8

    thank you! I was just going off the table on the welder and doing near minimum wire feed speed of about 2....was blasting straight through and figured faster speed was for thicker metal per the chart....now I know different thanks again

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      You're welcome :)

    • @rocketman702
      @rocketman702 4 года назад +5

      low voltage and high wire speed keeps the weld pool cooler.

  • @dalehammond1749
    @dalehammond1749 2 года назад

    I did MIG muffler system welding for the big 3 back in the 60's to 1980. We ran consistent welds around the pipes and I still get nightmares about that hollow sound when I goofed and burned through a pipe. I just ordered a flux core welder for hobby fun around the house. So I'm back into welding after about 40 years. Body work on a classic pickup is possible. You used a rapid spot weld technique we never used but it worked well for you. Thanks

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      You're welcome Dale - good luck on your classic PU - let me know if you have any ?s - I get to them 1-2 times a day :)

  • @nearheaven5311
    @nearheaven5311 4 года назад +6

    Very helpful demonstration. I was close to purchasing a mig but the simplicity of fluxcore just made more sense to me. Since I would be using it outside more, it was also a more practical decision.I went with harbor freights' titanium flux core and am very satisfied with it.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      Good to hear - thanks for the information. Have a great weekend :)

    • @pidancer789
      @pidancer789 Год назад

      Did you do auto body work with it like welding a frame

    • @rlewis1946
      @rlewis1946 Год назад

      Thanks for your reply.
      I’ve in several posts, that using “high quality” flux core wire is important to get good results.
      Have you used, HF 030 in. E71T-GS Flux Core Welding Wire, with good results?
      Thanks?
      Roy Lewis Buffalo, NY

  • @vincemajestyk9497
    @vincemajestyk9497 Год назад +2

    I think it works perfectly well. The key is the cleaning and prep afterwards. You have the right idea using a wire wheel, grinder and sandblasting to clean it up. Same as a MIG weld after the flux is all cleaned off. I used to braze small panels in a long time ago, but that's just as dirty or worse than flux core. Wire quality is key in flux core. I used flux core for the first time making a wye pipe for my car a while back. Before that I only used MIG or gas. Nice job!

    • @LakesideAutobody
      @LakesideAutobody  Год назад +2

      Thanks for you input Vince - good tips. I appreciate the comment. Have a good week :)

  • @aalabbasi
    @aalabbasi 4 года назад +12

    Metal is metal, so welding with a flux core is no problem. The people telling you not to use flux core are saying so because the chemicals in the flux could react with the paint. If you're doing chassis welding or floor welding, you should be fine.

    • @marcomilioli1934
      @marcomilioli1934 4 года назад

      How about a body panel?

    • @n3rdst0rm
      @n3rdst0rm 4 года назад

      So if you sandblast the area you need to weld/plan on repainting this shouldn't be an issue.

    • @Migman2020
      @Migman2020 4 года назад +1

      NO that is not the reason.. flux core wire will leave a THIN layer of slag after each weld.. that will mean defects and the last thing you want is you welding a chassis back up is weld defects.. as i mentioned in a comment above.. welders like this piss me off so much because at the end of the day your cow boy botch jobs are putting people in danger in time on the roads.. Flux wire DOES work but only if you use it correctly and on the correct applications. I use flux wire my self at work but never ever like this..

    • @aidenog7380
      @aidenog7380 3 года назад

      @@Migman2020 is it good for doing cab corners?

    • @bobanmilisavljevic7857
      @bobanmilisavljevic7857 3 года назад

      @@Migman2020 🤠

  • @nickking1510
    @nickking1510 2 года назад +2

    I used the exact same welder mine was dc but different name on it here in Ontario Canada $98 on sale to replace cab corners and rockers on 2011 f150 . What I did do was buy best quality fluxcore wire I could get spotted the rockers and cab corners till I only had 2 inch between spots then welded the 2 inches between took a new wire brush to the welds had to add a little sheet metal to fill some areas. I cleaned all panels welds with lacquer thinners then ground welds sanded metal and panels skim coated welds with hi quality body filler finished applied metal pre to bare metal primed with self etching primer then primer filler sealer and colour coat . Drilled 1/2 access holes in sill pillars stayed several times with light oil then heavier Amber oil undercoat

  • @leonardgilbreath9004
    @leonardgilbreath9004 3 года назад +6

    Flex core is what I've been using for all my body welds and it about 90% butt welds with the only exceptions is welding in the floor plans.

    • @2Small2Fail
      @2Small2Fail 3 года назад

      Do you mean for the floor pans you use lap welds?

    • @leonardgilbreath9004
      @leonardgilbreath9004 3 года назад

      @@2Small2Fail I don't lap any body panels there all butt welded and the floor pans are done the same if I can just use weld through primers if you have to lap anywhere.

  • @taxslave5766
    @taxslave5766 3 года назад +1

    I bought from Princess Auto the 125A inverter flux welder, and after watching a lot of welding videos especially your videos I feel more confident and relaxed about cutting the body up on my van and welding it back together again? lol. Thanks.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад +1

      You're welcome - glad you appreciate the content :)

  • @lostjalopygarage8150
    @lostjalopygarage8150 4 года назад +4

    Thanks for the video. Very encouraging! I think my 1950 Plymouth has 18 gauge sheet metal, so I feel confidant to try patching the floor with my flux core. If that works I'll do the rockers.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      That's a good looking car - I just looked it up. I think it'll work fine with the 18 gauge. Let me know how it goes. Have a great weekend:)

    • @milotorres6894
      @milotorres6894 4 года назад

      Spread tacks on patches fill in being careful not to put too much heat in one spot to a avoid warping metal use air to keep cool wire stickout to fill any blow outs make sure undercoating is cleaned up on weld zone or it will flame up on you wire wheels small ones work great.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      @@milotorres6894 Good advice - thanks :)

  • @johnsonbar5022
    @johnsonbar5022 Год назад

    For someone like me who is just learning this stuff, you did and do, and outstanding job explaining the fundamentals of this stuff. Thank you.

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      You're welcome JB - have a great weekend :)

    • @jjtrucker5950
      @jjtrucker5950 Год назад +1

      get a mig if you plan to do lots of sheet metal repair.

  • @WisdomInExperience
    @WisdomInExperience 4 года назад +11

    I was looking for this and your video really helped a lot. Nice simple and straightforward.

  • @guntherhoffman7421
    @guntherhoffman7421 3 года назад

    My Lincoln electric flux welder is 13 years old and just last year i changed the gun setup (which was very cheap) because of the trigger. Been using it mostly on Autobody and very happy with it!

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      How did you change the gun set up? Did you get a new gun or fix yours up. The gun on the my Miller MIG needs some work :)

  • @CA-pv5ie
    @CA-pv5ie 4 года назад +10

    Fantastic Jerry, love your videos - keep them coming!

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +2

      Thanks, glad you enjoyed it - have a good weekend :)

  • @yamahaxs6501
    @yamahaxs6501 2 года назад

    My dad could literally weld anything, and I learned the trade from him. Saying you can't do bodywork with flux core(like most people say) comes down to skill and setting up your machine properly. Is it the easiest process to do panel work? No, but it can be done. I prefer TIG for body panels, but it's slow. My garage doesn't have 220/240, so I'm stuck with a little FCAW machine for now, and it's capable for anything I do in my garage. I'm about to shorten my c10, so we'll see how it works out, but I'm sure it will be just fine. Great video!

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      Thanks for the input Frank - well said. Glad you liked the video my friend :)

  • @tedbponycars3014
    @tedbponycars3014 4 года назад +4

    Love mine. Restored a 68 fastback used it a lot

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Thanks for the input - have a great week :)

    • @tedbponycars3014
      @tedbponycars3014 4 года назад

      Randall brumfield seems inevitable so cleanliness is the best prevention

  • @williamgrissom9022
    @williamgrissom9022 3 года назад +1

    I bought that Harbor Freight flux-wire welder about 15 years ago for $89 on sale. Fixed many things with it. I even welded 3/8" steel trailer shackles to make tow-bar brackets for my M-B cars so I can flat-tow them. I've done a bit of auto body repair, mostly replacing rusted spots in a trunk and floor pans. I should have lap-welded like you show. when butting up the metal, it is too easy to get burn-thrus, especially in areas where the panel was thinned by rust pits. My biggest use was using old trampoline galvanized steel as curved roof beams, welded to 1.25" EMT and metal fence posts to make a carport on the cheap. MIG would be easier welding, but then need to buy gas bottles, which is hard to justify for the few times I weld.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      It's a good little welder for sure. Thanks for the comment William - love to hear stories like yours - have a good Thanksgiving my friend :)

    • @sabergermd
      @sabergermd Год назад

      The overlapping metal probably dissipates a lot of heat preventing bum through. Most videos I've seen trying to use anything thicker than .023 wire with butt joints are a disaster.

  • @charlescarabott7692
    @charlescarabott7692 4 года назад +3

    So much for those "experts" that say it cant be done. And thats with a cheap old style min/max switch type welder. Guess it will be much better with the inverter igbt welders that have much better current and voltage control. I am buying a helivite 182 from the italian amazon which goes down to 10amp settings up to 150amps and its only about €300 equivilent to about the same in $

    • @GypsyHunter232UK
      @GypsyHunter232UK 4 года назад +1

      Drop the shroud u do not need it for flux cored

    • @jonathanbelanger6574
      @jonathanbelanger6574 4 года назад

      @@GypsyHunter232UK your correct but I think in this video he's only using it to lean up against the metal he's welding

  • @justinsmith847
    @justinsmith847 3 года назад

    After watching this video I bought my own harbor freight flux 125 welder just arrived today and I plan on doing my cab corners and rocker panels in my 86 chevy c10 I appreciate this video wish me luck lol this will be my first time welding so I'm gonna practice on some scraps like you did first to get a hang of it then onto the truck

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      Have fun! Ask me any questions you have as you go along - you can do it for sure. Each time, you'll get better and better. Jerry

    • @justinsmith847
      @justinsmith847 3 года назад +1

      @@LakesideAutobody thanks I appreciate that yeah I'll take my time and it should come out ok lol

  • @wkw4095
    @wkw4095 2 года назад +4

    Me: "Hello auto body shop, Take a look at my truck, how much to repair 2 rusted wheel wells and 2 rocker panels." auto body: $13,000 plus..... Me at Home depot: ok lets grab a the Lincoln Electric flux core welder, roll of .035 and a roll of .030, passive helmet, some sheet metal and get cracking on the basics. I have 2 wheel well panels sitting in my garage waiting to be installed and for my skills to improve. Lap welding it will be and I will buy a cheap flange tool ;)

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      You don't even have to flange it. Weld it into place, lightly grind the welds, Knock it down and fill. See these vids - ruclips.net/p/PLOP9eoG14-I8mto72e0di1Q_URvGUlYfQ

  • @mentals555
    @mentals555 2 года назад +2

    This looks very very similar to the ones you can buy from the grocery store Lidl here in Germany. Their store brand is "Parkside".

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      How's life in Germany? Seems like a beautiful country :)

  • @patrickchristie82
    @patrickchristie82 4 года назад +7

    Thank you for doing this.

  •  4 года назад

    Great production value for a great tutorial.
    Just successfully welded with mine.
    Fought poor welding material the first two days.

  • @victoroneill7924
    @victoroneill7924 4 года назад +7

    It would be easier with a flux core tip.

    • @drizler
      @drizler 4 года назад +3

      Or just yank it off and go bare. That’s what I do with no issues . You can actually see what you’re doing.

    • @JimYeats
      @JimYeats 4 года назад +1

      @@drizler "Or just yank it off and go bare". Phrasing.

    • @skinlab4239
      @skinlab4239 4 года назад +1

      @@drizler She usually has me for 18+ after I do that.

    • @KStewart-th4sk
      @KStewart-th4sk 4 года назад

      @@skinlab4239 Seconds, minutes? Please explain

  • @narancs5
    @narancs5 3 года назад +2

    If you are welding with gasless flux you can take off the nozzle for better visibility. They even sell FCAW caps which fit in place of the nozzle so you dont accidentally spark an arc with the tip instead of the wire when working in tight spaces.

  • @1951Roy
    @1951Roy 4 года назад +5

    Thanks, was very helpful.

  • @ralfrisberg8009
    @ralfrisberg8009 3 года назад

    I have a cheap flux core mig welder and it's ten years old now and have never let me down once!

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      That's good to hear - thanks for your comment :)

  • @tracyrenko4171
    @tracyrenko4171 4 года назад +5

    Thanks now I know I can fix my 2006 2500 rockers

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +3

      You're welcome - let me know how it goes. Ask ?s along the way if you want - I answer every day - every comment :)

  • @ShivJG13
    @ShivJG13 Год назад

    Thanks for this. I'm looking to buy a project vehicle that needs some welding doing, but I've never mig welded in my life (I'm trying to learn tig for custom motorcycle builds though). All my welding will be done outdoors, and I have a limited budget, so this video has reassured me that it can be done, and I don't have to spend a fortune on a machine, and even more on bottles of gas.

    • @LakesideAutobody
      @LakesideAutobody  Год назад +1

      Here's what you'll be doing when welding a patch if that's your project. It's still fine to this day - ruclips.net/video/H87b1xlGofw/видео.html

    • @ShivJG13
      @ShivJG13 Год назад

      @@LakesideAutobody thank you. Yeah I think there’s going to be lots of that. 😄

  • @fishnfreak18
    @fishnfreak18 Год назад +1

    This is what I needed to see. I need to do the cab corners on my 87 Chevrolet and I have a little Lincoln wire feed set up at the house that’s running flux. I hate to go out and buy a tank and gas just to do the cab corners.

  • @itssupraman6956
    @itssupraman6956 2 года назад

    About to start replacing floor pans in an 81 z28 I just picked up. Wasn’t sure on using my harbor freight 125 but it’s always done everything else I needed and now I know it’ll do just fine. Thanks for posting👍

  • @pussycat6469
    @pussycat6469 4 года назад

    Thanks man i waz welding my body work wrong .im gunna use your techniques. I have gasless .and successful welded my 46 year old kingswood.hq with gasless.saved money .learnt .and now im super excited toi fix some rust too make the old girl pretty .thanks mate .

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      That's great to hear - I will be uploading a video that uses this same welder to repair a lower fender rust hole - you may get something out of that video too. Jerry

    • @pussycat6469
      @pussycat6469 4 года назад

      @@LakesideAutobody and the wire brush can go in storage .im getting that wire wheel .its awesome

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      @@pussycat6469 Good idea!

  • @leighbratcher1998
    @leighbratcher1998 4 года назад +1

    Jerry, after watching this video when you first put it out I did some more research and am getting a Harbor Freight Titanium 125 flux welder for Christmas. I have a small garage and not much room. As I have said before I really enjoy your videos. Thanks for doing this video, helped me a lot.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      You're welcome - Merry Christmas and have fun putting together your shop. Keep me up to date on how your doing with the welder. Jerry

    • @leighbratcher1998
      @leighbratcher1998 3 года назад +1

      @@LakesideAutobody Merry Christmas to you also.

    • @aidenog7380
      @aidenog7380 3 года назад

      @@LakesideAutobody can I use this welder outside

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      @@aidenog7380 Yes - wind doesn't affect it as it is flux core. MIG doesn't work outside 'cause it blows the gas away.

  • @leejameshunter8992
    @leejameshunter8992 4 года назад +1

    Used it since 1990, literally welded and restored thousands of Minis using it. Don't get me wrong using gas and solid wire gives a far better looking weld, but when using flux core practice makes perfect & it is possible to get a decent looking weld.

  • @charlesloomis2224
    @charlesloomis2224 4 года назад

    Thanks for the demonstration. I’m staring a car restoration project. I’m a novice. My confidence just increased.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      With a little trial and error it'll work out. Try different angles too if you begin to blow through i.e. not pointing down so much but at a 35 to 45 degree angle to the work piece. It doesn't force the wire and weld through thus making a hole.

    • @tgtg2945
      @tgtg2945 4 года назад

      Hi great vid thanks. Have learnt alot from here.
      I am a youtube and book taught novice. I have done some rust repairs on minibus and nissan roadcar, over last four year's.
      My machine is dual purpose hobby, 130amp Clarke in the UK.
      My original setup was fluxcore 0.9mm and machine could take upto 5 kilo reels.
      The cleanup head ache of flux core is a pain and acess into recessed joints was a nightmare.
      I would blow many holes may times. Due to the thicker wire required more amperage volts.
      It served a great purpose as a learning curve and that it allowed me to weld at home under the sky in still and windy uk climate.
      Adding a co2 bottle and regulator not hobby but full size allowed me to accept 0.6mm wire which I believe is 0.23
      This gave cleaner welds and less intense clean up by far. My welds did look better and blow through was far less, as also my experience was more.
      I used solely cO2 as I was only doing sheet metal. Do the research argon mix is better but not absolutely required.
      The naughty bit is that I used inverted 2 kilo fire extinguisher bottles to great effect.
      You knew when the gas co2 was out as the welds were disgusting. Haha.
      I intend to buy a big welding CO2 bottle as I am very happy with the setup.
      I also keep spare fluxcore reels for extra windy and emergency use.
      I recommend that anyone considering flux core to buy a dual purpose machine that can switch polarity, also enabling use for aluminium and stainless. as also can add gas shielding when you are ready too.
      All the best and thanks. Hope this helps.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      @@tgtg2945 Thanks for the information. I'm sure it'll help some folks out :)

  • @Mikefngarage
    @Mikefngarage 2 года назад +1

    For lap welding in sheet metal repairs the flux core works just fine. butt welding is a bit harder. I totally recommend gas because it is much easier when you need to butt weld. You uses what you have. If all you have money for is a flux unit. that is what you use. then you correct what you need with filler. Never overcomplicate the process. Filler is OK and will last for years weather it is on 1/16 an inch thick or 1/4 inch thick. just the same.

    • @LakesideAutobody
      @LakesideAutobody  2 года назад +1

      Great tips Mike - I appreciate your input. Good to hear it from a solid body man like yourself.

  • @byronwoolfrey1039
    @byronwoolfrey1039 4 года назад +1

    I have one just like it, had a Lincoln stick for years and that made it hard to get used to this wire feed and there is much splatter. I was going to sell it but decided to keep at it and now I use it all the time. For any new ones, if you find it impossible to use, remember it's the same as getting to carnagi hall , practice practice practice.
    Oh, I found my speed setting best FOR ME THAT IS between 5 and 6.
    Some people think this is both gas and flux core, it is not, it is flux core only so no need to wonder about polarity

  • @michaelpalmisano6788
    @michaelpalmisano6788 3 года назад

    Thanks I needed that. Got a flux core welder for early xmas gift from my dad because I told him I needed a welder to fix the floor in my van. Looked around online to find everyone saying you can't use flux welder on auto body panels An I got really discouraged . I'm not looking for perfection on this project, I just need to be able to walk in the back of the van without falling through lol. Currently a big rushed hole. Thanks for the video !

  • @remiel3315
    @remiel3315 Год назад +1

    i did some heavier work on an 05 Subaru for the part that connects the unibody to the pinch weld w/ 16ga steel and a older hobart flux core welder, it worked pretty good

  • @keithfrisell4271
    @keithfrisell4271 4 года назад +2

    This was a awesome video ! You should do some repairs with it . Most DYI don't have big bucks for a welder . I like the idea of no gas especially in windy areas .thanks and stay safe.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      Thanks, I'll do a rust repair video with this welder in the near future. Have a great weekend :)

    • @stevefuller1779
      @stevefuller1779 4 года назад

      Still needs the vapour from the flux to protect the weld no good in the wind.

  • @lawncuttingplusdelta
    @lawncuttingplusdelta Год назад

    Nice demo , I am currently taking a stab at welding in a rear frame rail on my nova and it worked pretty well … looking forward to getting after the bottom rear quarters , and I will stitch weld just like you did here

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      Good luck. Remember though MIG (gas) is always a ton easier. If you get good with flux, you'll be a pro instantly with MIG (gas).

    • @lawncuttingplusdelta
      @lawncuttingplusdelta Год назад

      Coming from you that’s big. 👍🏻….. there are a few others that show it works , and it’s practical .. no tanks to drag around and it gets job done

  • @mlieser1230
    @mlieser1230 4 года назад +1

    I've used the flux core for body work. Even used it to spot weld. Used the lowest heat setting. Just had to wire wheel the welds. After grinding and filler it came out good.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Great to hear - thanks for you opinion on the topic :)

    • @pbcycleworks
      @pbcycleworks 3 года назад

      Ok, first off we don't drag the puddle we push the puddle. Stop giving people wrong information.
      You are a hack at best, I wouldn't let you anywhere near my welders or jobs. My customers would never come back.

  • @hopefilledsinner3911
    @hopefilledsinner3911 2 года назад +1

    I've welded rusty car panels with a gasless mig , I got down to the cleanest steel I could but although I did the job I had one hell of a time if I did just as you done it blew holes. I was buttwelding though, next time I will overlap as you just did.

  • @The_R-n-I_Guy
    @The_R-n-I_Guy Год назад +1

    I take the nozzle off to get a better view of the weld. There's no gas, so it's not needed. Also I just make a few tacks a few inches apart, clean it and let it cool before stitching it together. Always welding small areas, spaced apart, and cleaning and cooling in between passes

  • @keithfrisell4271
    @keithfrisell4271 4 года назад +1

    The welding wire from Italy is a flux core but with a lot less splatter and I would dip the welder tip in anti splatter gel . You should try cooking spray to see if it helps with splatter ? I haven't tried that . What a great channel you have and I have learned a lot from your videos. Thanks again and stay safe. God Bless America !

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Thanks for the tips and thanks for the support. I'm glad you enjoy the channel - have a good weekend :)

  • @DeadLuckArchives
    @DeadLuckArchives 3 года назад +1

    Thinking about buying one of these, thing is you're doing lap joints where I'll be doing butt joints. Less chance of burn through on laps, but then again I'd work two spots at a time to allow it more time to cool between shots.

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      Here's one on butt welding with the same welder:ruclips.net/video/iznc9CCtZnw/видео.html

  • @georgespangler1517
    @georgespangler1517 3 года назад +1

    I built my whole street rod with flux core in 2010,, but after I got my gas seild mig it changed everything, More sinus issues and splatter,,,, l use my flux core outside on rough work still,,,it's a Lincoln 135,,,,,,but my miller 180 auto set gas is my go to for finish work...

  • @britjamaine9229
    @britjamaine9229 4 года назад

    I have welded a lot of bodywork with fluxcore. All my welding is outside and with the constant breeze the one time I used gas the welds were such a pain. I got the titanium fluxcore welder from HF and it works really well for cheap. It put a smile back on my face. My mig was trash. The new one is like 11lbs. and doesn’t pop my breaker.

  • @angryyankee9184
    @angryyankee9184 4 года назад +1

    I had that welder. The Titanium Flux 125 they sell is like $70 more and works WAY better.

  • @PC_CERTIFIED
    @PC_CERTIFIED 3 года назад

    I really appreciate it in all serious. I have to do rocker panels on a 2002 Buick century and now I don't have to go out and spend a bunch for a welder. Harbor freight it is. thank you

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      You're welcome. No worries about spatter as it comes off real quick with a wire wheel or hand grinder/sander. You have to clean up any type of weld any way before moving on to the next stage in body work :)

  • @SAXONWARLORD1000AD
    @SAXONWARLORD1000AD 3 года назад

    I DID 32 PATCH PANELS IN MY 77 JEEP 2 YEARS AGO , NO PROBLEM , TOOK THE SHROUD OFF FOR BETTER VISIBILITY , I THINK I HAD THE CRAPPIER HF MACHINE AND IT WORKED FINE WITH LINCOLN WIRE (important to get better wire than HF wire)

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      That's true Saxon - my friend says the Lincoln wire works better.

  • @Keck_YT
    @Keck_YT 3 месяца назад

    lap welding was of big benefit here. If you are butt welding, you cannot be anywhere near as aggressive with the welder. Great showcase of what can be done with fluxcore

    • @LakesideAutobody
      @LakesideAutobody  3 месяца назад

      Body shops lap weld patch panels for many good reasons. The biggest being all sail panels where the quarter meets the roof were always lap welded and filled - lasted forever and no one knew it was there :)

  • @porroh869
    @porroh869 4 года назад +1

    I use 0.8 fluxcore on bodywork with good penetration. The correct settings and wire speed make the difference for me 👍

  • @AndysDogHouse
    @AndysDogHouse 4 года назад

    WOW. I am impressed. Now you know what you are doing when it comes to welding. When I first decided to restore my first car, I bought a lincoln 110-volt welder and I was blowing through like crazy. So I bought the gas add-on and everything was fine from that point on. Thanks for sharing.👍👍🍁

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Yes - gas is nice. You're welcome and thanks for the support. Those Lincolns are nice welders :)

    • @crpth1
      @crpth1 4 года назад +2

      I hope meanwhile you learned that you were burning trough. Not because it was flux core but because you didn´t learn how to do it. ;-)

  • @pbpyro5546
    @pbpyro5546 4 года назад +1

    Thanks for this video. I bought this welder to fix a patch in my old camaro’s floor pan.

  • @michaelshakib7777
    @michaelshakib7777 2 года назад

    Finally a realistic video showing welding on thin gauge steel.

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      Thanks for the comment Michael - glad you liked it :)

  • @joeanon5788
    @joeanon5788 2 года назад

    Also the beauty of the CE125 is that not only is it cheap in price, it also takes 10 pound spools of wire. Remember that this machine is AC output only. With 1/8" steel (10ga.) I run it around a speed of 3.5 - 5 and on MAX. I don't have any use for thinner steel, typically. Any thicker, and I use my CE225 SMAW, which I vary electrode sizes from 1/16" 6013, 3/32" 6013, 3/32" and 1/8" 7018. With the 1/16" 6013 I run around 40 amps. Have fun, control the puddle, and make your next weld better than your last.

    • @LakesideAutobody
      @LakesideAutobody  2 года назад

      Thanks for your input Joe - Merry Christmas and Happy New Year :)

  • @dinosshed
    @dinosshed 4 года назад +1

    The flux core works well with more stick out than gas shielded solid mig. Makes all the difference to have the correct polarity as well.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      Thanks for the tips :)

    • @papahajek5383
      @papahajek5383 4 года назад

      @@LakesideAutobody The HF welder is AC, no polarity. Shallow angle can reduce burn thru . You're not building a pressure vessel, but you are doing a good job.

  • @19cruella82
    @19cruella82 Год назад +1

    Thanks alot. Goin into the garage tonight to dail in my settings

  • @CosmynFire
    @CosmynFire 4 года назад

    I own a flux core welder like this and works fine.For me it is a little bit tricky to use this type of welder because i use a stick welder more often(my first type of welding machine).I think this is caused by the lack of practice.
    I did a few rust repairs with a inverter stick welder using a 1.6,2.0 and 2.5mm rods at 10 to 30 amps to avoid blowing through and it turned out well.The hot start and arc force features helped me a lot.
    No need to buy an expensive MIG welder for this type of work.

  • @johnnyrice2531
    @johnnyrice2531 3 года назад

    I have that exact welder and rarely if ever use the min setting. I have welded up to 5/8" plate and had no problems. Yes it was multiple passes but it worked

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      It's a fine welder for the price - thanks for your input Johnny Rice. I like that name, "Johnny Rice"

  • @georgeclarke1183
    @georgeclarke1183 2 года назад +1

    Great content in this video was deciding weather to purchase a gas mig welder or the gasless version for my car bodywork repairs the gasless version will be perfect for my bodywork repairs keep up doing these great videos

    • @LakesideAutobody
      @LakesideAutobody  2 года назад +1

      Gasless is a bit harder but with some practice you'll be just fine. A nice little flux core welder can be purchased for right around 99 bucks at HF on sale. Thanks for the support and comment George :)

  • @TheRealTonyCastillo
    @TheRealTonyCastillo 4 года назад

    I did a butt weld on a front quarter of my durango where I had to cut out a piece that was rusted by the driver lower door. It was a challenge even on low setting blowing through, I eventually got it with my hobart 140. I don't do a lot of welding so investing in gas doesn't make a lot of sense at the moment. Sometimes you just have to use what you have. Great video.

    • @walterwinnipeg7350
      @walterwinnipeg7350 4 года назад +1

      In this video, he isn't doing a butt weld, which I think would be trickier. Having the two layers of metal, as in this video, would make blow-through less likely.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      You're right. If you lap weld it will be a bit easier as you wont blow through as easy.

  • @GypsyHunter232UK
    @GypsyHunter232UK 4 года назад +1

    You can also weld in flux cored with no shroud as it gives u better view of the arc. I dumped my shroud as the gas shield is produced at arc source. Try it.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      Thanks - I'll give it a try - have a good week :)

  • @timothyroe5020
    @timothyroe5020 4 года назад

    I am a novice and was thinking of going this way for some small repairs on restorations. Great instruction and I think with some practice I could do what I want thanks to you. You just got a new subscriber. Looking forward to viewing the rest of your content.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      I know you can with some practice. Thanks for the support and the sub. Glad they help you out - have a good week :)

  • @TheRaulr151
    @TheRaulr151 4 года назад

    I am about to do body work on a 67 Mustang and feared I messed up buying a Flux welder. When you search it seems like Flux is taboo for bodywork and Mig is the only way to go. You REALLY have to play with the flux to get it to work, but it will work. A very important item to note is he had the panels over lap. Butt welding would make it so much easier to burn through. If possible overlap your panels and it will make the welding so much better if you do go Flux.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      Good point - there is absolutely nothing wrong with overlapping. See these videos: ruclips.net/video/8XaZBy7GC7A/видео.html or
      ruclips.net/video/2o37dX--w0I/видео.html
      Have a good week :)

  • @KFRogers263
    @KFRogers263 Год назад

    Thanks! I've been watching your vids as I'm going to undertake a repair I probably going to fail at. Turns out, I have the older 90A version of that welder, which I'm upgrading to be DC. It looks like it will probably be plenty!

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      You're welcome - feel free to ask ?s along the way. You won't fail either 💪

  • @MrAllan9
    @MrAllan9 4 года назад

    Used Flux core in my body shop for years, never had a problem, and didn't have to drag around those bottles.

  • @alcocklake
    @alcocklake 4 года назад

    I welder inner and outer rockers on my 2000 Sierra PU with a Miller weldPak 100 flux core and .035 wire... worked fine, though I'll try .030 wire next time... great video..thanks from Kenora NW Ontario Canada

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      That's good to hear. Sound nice up there in Kenora - I'll have to vacation there one day :)

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      @@joechimento7934 Here's a few videos that may help out: ruclips.net/video/wRl1QfkrBeY/видео.html ** ruclips.net/video/I8VVlYPIigA/видео.html ** ruclips.net/video/2vEPQimW564/видео.html

    • @alcocklake
      @alcocklake 4 года назад +1

      @@joechimento7934 mine were pretty well shot to he77... I used a disc grinder with a cutting wheel to cut above the rust, well into the good metal and then ground, sanding disced the good material so I could weld trough some ho;es I custom drilled in the new rockers.... in a few placed, particularly the inner rocker I used pop rivets to draw the metal together to get a tight fit. Then primer, bondo and paint... I had nothing to lose :)

    • @alcocklake
      @alcocklake 4 года назад +1

      the patch panels were just sacrificial material...I didn't try too hard to use them where not needed..I got mine from LKQ in Winnipeg Mb Canada but LKQ is N America wide..cost about $35 a side in 22 g steel

  • @skkfor
    @skkfor 4 года назад +1

    Major thanks for the vid and info. I just bought that exact welder to fix my "ram rot" wheel arches. Your instruction is exactly what I was looking for!!

    • @LakesideAutobody
      @LakesideAutobody  4 года назад

      You're welcome = you're right about those Rams - they rust fast. Really, every truck seems to rust fast over the wheels, cab corners, rockers...

  • @emort6
    @emort6 3 года назад

    I purchased the Chicago electric welder to repair the legs on my weber grill. Mostly sheet metal welding and it looks like it's new.

  • @greensfarmland
    @greensfarmland Год назад

    Thanks for this video, I recently bought a flux core welder, because most the work I will do with it is outside, and random places on the property.
    I also have a old bronco 2 that will need body work, so I was hoping I could use that as well.
    As always appreciate your videos, still learning a lot from ya.

    • @LakesideAutobody
      @LakesideAutobody  Год назад +1

      Glad to hear it FDS - those Bronco II's are getting rare :)

    • @greensfarmland
      @greensfarmland Год назад

      @@LakesideAutobody That ain't no joke.
      Thank God there is enough solid pieces left to bring this one back around.

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      @@greensfarmland 👍

  • @eazyrider6122
    @eazyrider6122 Год назад

    Nice job am supprised about the lack of distortion in your work considering that you didn't space out your spot welds as mormally done in thin panel work. With FC you do not need the sheld on the handpiece wire tip either for better vision and more accuracy. Another thing to mention in your video is what size wire you used. And that with FC the use of anti spatter spray helps witb the clean up. Did you use the cheap harbour freight wire that can with the machine?. Im really impressed with your work.

    • @LakesideAutobody
      @LakesideAutobody  Год назад

      Thanks for the kind words Easy Rider. I did use the cheap wire that came with the welder. A friend of mine swears by the Lincoln wire so - that might work even better. On large open areas you have to be careful with metal distortion. You can get away with laying them right in a row on small spots or rigid areas like rocker panels, edges, etc.

  • @guymanicone7921
    @guymanicone7921 4 года назад +1

    Thanks for the video. I have been working on some sheet metal repairs with this welder and having mixed results. I was using the 2 setting on the speed for the 22 guage sheet. It was not working well, I wished I saw this before I worked on that project. I'll have to try that next time.

    • @drizler
      @drizler 4 года назад +1

      Guy Manicone You Really have to screw around with your feed setting until you find that sweet spot. It’s never as easy as just setting it like the illustration on the machine. The quality of the wire you’re using might factor into it as well.

    • @LakesideAutobody
      @LakesideAutobody  4 года назад +1

      Good tip Guy - I had the same issues until really exaggerating the wire feed and messing w/ the settings - I think it will work for you if you try it again :)

  • @chazgregrrr404
    @chazgregrrr404 3 года назад

    We're you trying to fill time or the spot welds? After the third spot weld, you could have advanced the video to the last couple welds on the string. Too many videos to watch and too little time, lol.
    Edit: And I forgot to say thank you, it did help. 👍🙏

    • @LakesideAutobody
      @LakesideAutobody  3 года назад

      Some folks tell me they want to see more - some say less so... Thanks for watching though - hope it helped :)

  • @recumbentcountry
    @recumbentcountry 4 года назад +2

    don't forget to make sure of the polarity, mine came set up for gas, not flux core even though it was not sold with the hoses.

    • @1000186ful
      @1000186ful 4 года назад

      How did you check that Doug Morency

    • @recumbentcountry
      @recumbentcountry 4 года назад

      @@1000186ful inside the welder there is 2 connectors for the welding cables as discussed here. the Positive should be the clamp cable and the negative to the welding wire.

    • @1000186ful
      @1000186ful 4 года назад +1

      @@recumbentcountry ok ill check that thanks

    • @recumbentcountry
      @recumbentcountry 4 года назад

      @@1000186ful did you find the connectors.

  • @TrainDriverRob
    @TrainDriverRob 2 года назад

    Nice one Squire, has given me a bit more confidence with my Draper 100A flux core welder, I’ve scavenged a Snap-On tool chest with a rotten bottom, looking to patch it up, hopefully.

    • @LakesideAutobody
      @LakesideAutobody  2 года назад +1

      Very cool - can't beat fixing up an old Snap-On box. Nice project - let me know how it goes for you :)

    • @FOOKyourFEELINGS
      @FOOKyourFEELINGS Год назад

      I know it's a year late..... How did you get on? Mines also a 100 amp

  • @oddguyamaar9191
    @oddguyamaar9191 2 года назад

    Great i appreciate the video
    i was really thinking on getting myself a cheap welder to fix some metal under the floor of my old car
    this was indeed very helpful

  • @tootsie5052
    @tootsie5052 4 года назад

    I bought a cheap flux core welder kinda like this a few years ago to repair some rust on my '53 Chevy pickup. I had never used a MIG welder in my life but have used a stick welder some. With a little practice I replaced front floor pan, kick panels, cab corner, and a few other small places. If you buy one, buy some Lincoln or any good brand wire, don't use the crappy wire that comes with it, too much spatter. I think I paid $80 bucks for mine on Ebay.