Thank you, thank you, thank you!! I’m doing this exact job on my 2011 Santa Fe and just happened to come across your video. This is going to make the process so much easier.
Wonderful video by a great mechanic. Your tutorial was excellent. Your instructions were the right way to tackle this problem. Thank you so much for your lesson, a big thumbs up...
You have one of the more informative videos on 2017 Hyundai Santa Fe Sport whole brake job. Thank You. Keep the good work. Do a headlight, front turn signal replacement of the bulb..
Brother I have nothing negative to say right here man, you did a fantastic job and you were very articulate in explaining and doing the job, thanks so much for sharing this video, I was so impressed that I even subscribed to your channel. God bless 🙌 🙏🏼.
You're welcome man I have a Toyota corolla 2008, how do I clean the throttle body and the idle air control valve, you just absolutely amazing how you demonstrate all where you're very clear how you remove and replace every single components and parts easy to see not missing moves as you explain and understand gives me confidence thanks so much.
That's a great video! I do have a question, my parking break is not holding on well and the foot pedal is going way to far don't... What are the added steps to adjust the parking brake on a 2019 Santa Fe XL SE (no electronic brake, its the foot one on my car)? Thanks!
@@KITS_Auto_and_Truck_Repair Isn't that small rubber seal you took off of the old disk the location to adjust the parking break without removing the caliper and disk? Or can you only adjust it by getting all that out of the way?
Awesome instructional video. Question, did you clamp the brake hose to prevent it from leaking when you removed it. I have to replace my caliper this week. Thanks
@@KITS_Auto_and_Truck_Repair update. Before removing the old caliper, I loosened the banjo bolt. Removed old caliper, installed new caliper (comes with new banjo bolt and 2 copper crush washers). Installed new banjo bolt and washers, and bled the caliper. Done 👍
Hello!!! Can you please tell me what the torque specs for the brake caliper mounting and caliper to mounting in lbs ? I have a 2010 Hyundai Santa Fe 😫😫
Any tips on getting those metal brackets in that hold the pads? Mine don’t want to fit in and I know they are the correct ones. Any help is appreciated
Caliper bracket bolts: 52ft-lb Brake caliper bolts: 23ft-lb *make sure to always click the torque wrench twice and alternate between the two torqued bolts of the same spec* Leaving this here for quick reference!
Hi! I have a 2012 gmc sierra truck I had the fuel pump control module replaced and programmed. My truck was running after 2 days it wouldn't crank we put it on the computer it said No communication what happened? We changed the fuel pump I forgot to tell you before. Where do we go from here? Need help?
2 years later you’re probably fixed but if it won’t crank start by checking battery volts, battery cables, jump the starter to see if it’s able to crank and if it does check the starter solenoid. Either way, if it’s not cranking it’s nothing to do with the fuel pump etc.; if the fuel system was bad it wouldn’t run, but the fuel system isn’t in the starter circuit. Maybe the starter motor failed. Once you get it to turn over it will probably start right up and run fine but not cranking isn’t a fuel problem.
Why did you apply the anti-seize to the inside of the anti-rattle bracket? Shouldn't you put it on the other side of it? Where it makes contact with the actual brake pad?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I love how you go direct to the point and makes it looks so easy… also thank you so much for your feedback with your followers!
DinhaS Thank you!! I appreciate you!
Thank you, thank you, thank you!! I’m doing this exact job on my 2011 Santa Fe and just happened to come across your video. This is going to make the process so much easier.
Ridin' With Ricky My Pleasure!
Wonderful video by a great mechanic. Your tutorial was excellent. Your instructions were the right way to tackle this problem. Thank you so much for your lesson, a big thumbs up...
Michael Torres Thank you!
Thank you for stating the bolt sizes. So many instructional videos leave off important details like that.
The Snyders My Pleasure!!
Best and clearest instructions I ever saw. Will do mine tomorrow. Thanks.
Anthony Russo My Pleasure! Good Luck with your project!
Great video, thank you. For anyone who wants to know, the torque spec for the bajo bolt on the 2007 Santa Fe is 18.8 Ft Lb.
@joenmass My Pleasure!
You are an incredible teacher. Keep up the great work.
Bobby Pierce Thank you!
Best damn car tutorial. You did a great job of making sure we could see everything and explaining it. Thank you
@JesseBourretGheysen My Pleasure! Thanks
Great job, excellent camera angles, really good narrative with clear explanations.
@jfkaylor77 Thank you!
Super .one of the best, teaching how to do it the right, and in a professional way. thank you very much.
Rob luv My Pleasure! Thank you!
A brilliant video and so easy to understand. Well done
Diren Sununan Thank you!
You have one of the more informative videos on 2017 Hyundai Santa Fe Sport whole brake job. Thank You. Keep the good work. Do a headlight, front turn signal replacement of the bulb..
Rell Monger Thank you! and good suggestion!
Appreciate your help good example well present. Keep up good work
@michaelsamuelamos9037 Thank you!
Love your video simple and to the point.
ZamZamOil Thank you!
Fantastic Video. I t helped me do a complete brake job like a pro. I appreciate your detail and clarity!
Dean Baron Thank you!
Brother I have nothing negative to say right here man, you did a fantastic job and you were very articulate in explaining and doing the job, thanks so much for sharing this video, I was so impressed that I even subscribed to your channel.
God bless 🙌 🙏🏼.
@donaldramsamugh1723 Thank you! I appreciate it, welcome to our youtube community!
When working on my car, I use anti seize as well. You taught me well.
Ivan Peterzell I'm glad to hear that you remembered that what I taught you!!
That’s not anti seize, that’s just plain ol grease.
Wow man you are really amazing you just demonstrated the caliber work so less stress thank you you rock.
Re George Thank you!!
You're welcome man I have a Toyota corolla 2008, how do I clean the throttle body and the idle air control valve, you just absolutely amazing how you demonstrate all where you're very clear how you remove and replace every single components and parts easy to see not missing moves as you explain and understand gives me confidence thanks so much.
Thank you so much, you are a great teacher, you made the job easy for me. two thumbs up
Eddie Cox My Pleasure! Thanks!
Great video! Super helpful! Thank you!
@mtsouthall My Pleasure!
Excellent video. I think this is my problem as my caliper was not going all the way in as well.
@MrVincent1897 Thanks!
Fantastic video. Very helpful. Thank you!
Justin Fednander My Pleasure!
Great video. Thanks for the refresh before I give it a go.
Austin Karls My Pleasure!!
That's a great video! I do have a question, my parking break is not holding on well and the foot pedal is going way to far don't... What are the added steps to adjust the parking brake on a 2019 Santa Fe XL SE (no electronic brake, its the foot one on my car)?
Thanks!
@brunoperrotta846 My Pleasure! you can adjust the park brake shoes after you remove the brake disc, follow the steps in the video!
@@KITS_Auto_and_Truck_Repair Isn't that small rubber seal you took off of the old disk the location to adjust the parking break without removing the caliper and disk? Or can you only adjust it by getting all that out of the way?
@@brunoperrotta846 Yes! you can adjust it through the hole on the Disc!
Très bien expliqué. Merci!
@mgtremblay De Rien, Merci
Really well done....THANK YOU!!!
Kevin Hill My Pleasure!!
Great job , very helpful
Adam Long Thank you!
Perfect! Thank you!!
dennis walton My Pleasure!
For such a amazing video and angles I sub and like thanks sir
@ryansanchez5673 My Pleasure! Thank you!
Do you open brake reservoir to relive oil pressure on piston?
@roberthubal6278 Yes!
Awesome instructional video. Question, did you clamp the brake hose to prevent it from leaking when you removed it. I have to replace my caliper this week. Thanks
@phi2771 My Pleasure! I think I did
@@KITS_Auto_and_Truck_Repair update. Before removing the old caliper, I loosened the banjo bolt. Removed old caliper, installed new caliper (comes with new banjo bolt and 2 copper crush washers). Installed new banjo bolt and washers, and bled the caliper. Done 👍
Awesome video bro. I'm seeking the torque nut specification for Santa Fe 2013, specifically for the brake system, as you did here.
Ramil Huseynov it's the same torque specs!
@@KITS_Auto_and_Truck_Repair Thank you very much!
@@RamilHuseynov My Pleasure!
How do you find those CarQuest parts?..1 year later, would you still recommend ?
@troyporter3825 yes they are pretty good!
@@KITS_Auto_and_Truck_Repair awesome thank you!
Thank you for the perfection hugs from USA and Brazil
Super Magma Man My Pleasure! THANKS
Hello!!! Can you please tell me what the torque specs for the brake caliper mounting and caliper to mounting in lbs ? I have a 2010 Hyundai Santa Fe 😫😫
It’s an AWD
@coryretas2000 it's the same torque spec like I mentioned in the video!
Hello. Could you share how to replace rear brake pads on 2019 santa fe ?
@uniqueecho4260 it's the same process!
Big help. Thank you
Jerome Liceralde My Pleasure!!
Any tips on getting those metal brackets in that hold the pads? Mine don’t want to fit in and I know they are the correct ones. Any help is appreciated
Jordan Brimo make sure they are seating properly!
Did you clean/polish/paint the place where they seat?
Corrosion makes a lot of friction and they can get hung up
nice..tq for simple learning
Sonnycman is DaD Thank you!
Do you think its necessary to flush brake fluid.
@herbnavarro3958 Yes!
Are the torque specs the same for a 2009 Hyundai Santa Fe?
@eaurius7638 I believe so!
@@KITS_Auto_and_Truck_Repair thank you
Caliper bracket bolts: 52ft-lb
Brake caliper bolts: 23ft-lb
*make sure to always click the torque wrench twice and alternate between the two torqued bolts of the same spec*
Leaving this here for quick reference!
Thanks taught me brorher
Alexander Stefanxandra Swedish My Pleasure Bro!!
Nice work bro
The Texas Chainsaw Thank you!
Hi! I have a 2012 gmc sierra truck I had the fuel pump control module replaced and programmed. My truck was running after 2 days it wouldn't crank we put it on the computer it said No communication what happened? We changed the fuel pump I forgot to tell you before. Where do we go from here? Need help?
Imraan Abdulhaqq check your CAN Bus! or have a pro mechanic diagnose it for you!
2 years later you’re probably fixed but if it won’t crank start by checking battery volts, battery cables, jump the starter to see if it’s able to crank and if it does check the starter solenoid.
Either way, if it’s not cranking it’s nothing to do with the fuel pump etc.; if the fuel system was bad it wouldn’t run, but the fuel system isn’t in the starter circuit. Maybe the starter motor failed. Once you get it to turn over it will probably start right up and run fine but not cranking isn’t a fuel problem.
Great video
Nate Ross Thank you!!
Helpful video nice, K DIAGNOSTIC thank you all ways
Suleman Habib My Pleasure!!
DEO LOVE YOUR CHANEL HIT THE ROAD YO!!! 🤣😅✌️🦀
Joseph Bonilla Thank you! Lol!! Are you suggesting that I become a mobile Tech!!
Why did you apply the anti-seize to the inside of the anti-rattle bracket? Shouldn't you put it on the other side of it? Where it makes contact with the actual brake pad?
@geoffj83 it's the same thing done differently!
pinch the brake hose , prevent fluid draining
@ar3zondo Good point
I love the shirts
Ivan Peterzell Thank you Bro!!
Thanks Sir!
Dumisani Tembani Mtisi My Pleasure!!
I suggest to put a transparant tube on the bleeder screw so you can see airbubbles coming out. Also a little bit off a mess .
Dirk Vanbesien Great suggestion, Thanks!
Très intéressant si tu peux m'envoyer ton numéro WhatsApp
Freddy Machine Envoyez Moi un Email at Deo@Calleva.org!! Si vous avez des questions!!
Great video and very helpful!
Amazing Video
TheSwag Bodies Thank you!