We are getting very busy with RUclips and our video comments. At the same time we are trying to run a pool and hot tub business. Unfortunately, we will limit our comment responses to our Members. Consider becoming a Member: ruclips.net/channel/UC7rBDbZ5XT4QtOouN6PTKXQjoin
had a FLO2 on my 2008 sundance after draining it. Found the valve, tapped it with a screwdriver a few times, and it unstuck. Thanks for saving me $250 on an emergency service call!
Omg! It is -40c outside by the jacuzzi and I have been plagued by an fl2 that eventually goes to a 3 dash code and stops all functions in -40c temps! C/O the pressure switch did not help, removed the filter and operation resumed normal! Thankyou for this video!
I have a 2019 Sundance Edison with the fl2 closed error. The switch is not where you show in the video. Could it be in the spray insulation behind the right panel? Or where else could it be? Thanks
Have to know if you have a flow switch or a pressure switch. Look on the circuit board to see where the switch is plugged into on the board and follow it out.
I have a 2000 sundance hottub w a leak. I accidently let it get too low, have kept full w hose. Cool msg is on, one pump running. Had heater replaced in january and was working until i noticed low water. Any hope?
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
We are getting very busy with RUclips and our video comments. At the same time we are trying to run a pool and hot tub business. Unfortunately, we will limit our comment responses to our Members. Consider becoming a Member: ruclips.net/channel/UC7rBDbZ5XT4QtOouN6PTKXQjoin
had a FLO2 on my 2008 sundance after draining it. Found the valve, tapped it with a screwdriver a few times, and it unstuck. Thanks for saving me $250 on an emergency service call!
Omg! It is -40c outside by the jacuzzi and I have been plagued by an fl2 that eventually goes to a 3 dash code and stops all functions in -40c temps! C/O the pressure switch did not help, removed the filter and operation resumed normal! Thankyou for this video!
Glad it worked out for you.
I have a 2019 Sundance Edison with the fl2 closed error. The switch is not where you show in the video. Could it be in the spray insulation behind the right panel? Or where else could it be? Thanks
Have to know if you have a flow switch or a pressure switch. Look on the circuit board to see where the switch is plugged into on the board and follow it out.
Thanks, will do
I have a 2000 sundance hottub w a leak. I accidently let it get too low, have kept full w hose. Cool msg is on, one pump running. Had heater replaced in january and was working until i noticed low water. Any hope?
It will be fine. Cool msg is just telling you the water is cold. Test the heater element to make sure its heating.
I have a hot tub Sundance fl1 code what do I do
Check out our other videos on jacuzzi fl1 error codes.