How to Replace Rear Inner Wheel Bearings 2007-2014 Chevrolet Silverado 2500 HD

Buy Now!
New Wheel Bearing Set from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new rear inner bearing on your 2007-2014 Chevrolet Silverado 2500 HD. A vibrating or groaning noise coming from a wheel tells you it's time to replace the bearing! This wheel bearing is a direct replacement for the bearing in your vehicle's solid axle.
Estimated installation time for a professional technician is approximately: 1 hour 42 minutes
This repair was done on a 2011 Chevrolet Silverado 2500 HD LT 6.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obHE/1A...
• Pry Bar 1aau.to/o9z/1AX...
• 19mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/os5/1AX...
• Air Blow Gun
• Bearing Race and Seal Driver 1aau.to/oP/1AXA...
• Dead Blow Hammer
• 1/2 Inch Impact Gun 1aau.to/oyC/1AX...
• 1/2 Inch Breaker Bar 1aau.to/orW/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/ob9z/1A...
• Torque Wrench 1aau.to/obda/1A...
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oPK/1AX...
• Copper Anti-Seize
• Gear Oil
• Gloves 1aau.to/oa9d/1A...
• Liquid Thread Locker
• Marker / Writing Utensil
• RTV
• Safety Glasses
• Sandpaper
• Chisel 1aau.to/ong/1AX...
• Drain Pan
• File
• Floor Jack 1aau.to/oayG/1A...
• Hammer
• Jack Stands 1aau.to/oakv/1A...
• Pick 1aau.to/o4h/1AX...
• Punch
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Telescope magnet
• Wheel Chocks
• Wire Brush 1aau.to/oyp/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@vannkate]

Just wondering why you didn’t change the outside bearing? I’m having a vibration under pull, changed all 4 universal joints, pulled front cv joints individually, no change. Fixing to do rear wheel bearings.
2011 Chevy 2500HD 4x4

[@onlyme8870]

Is this the same for the 1500 express?

[@danjaquez1379]

This is not a 2007. The parts are different.