looks great! thank you for being so open with the design! For those who may confuse easily, you may want to change colours on the wiring diagram for the leds. The colours for GND and + alternate between the strips. Which I'm not sure was intentional. It's not a big deal for those who know what they're doing as they're just colours, but there's always a possibility someone may connect the GND and + led terminals 😊
Bang teryata kmu orang indo ya bang. tak kirain orng luar negeri .auto subrecd klo gni. aq penonton setiamu bang dri video pertama smpai trahir. mntap bang smga sukses sllu. dan dimudahkan rezekinya oleh ALLAH SWT. امين 🤲🤲
oh this is absolutely awesome! So this has a microphone that picks up the ambient sound too? That would be really cool. Is that toggleable? like if you just wanted to see the music's spectrum rather than... both i guess?
Hi, first this is awesome and I'm glad that you share code as well. I build it but half of the led's(each second column) are working from top down and I did use your way of connection exactly like is described. SO where you settings your array, or how do you sorting correct?
It looks awesome!! Just wondering if you could share the arduino code for some undertanding about how to change the colors. Im not sure if it does automatically or you trigger by a button or potentiometer. It would be awesome to change as you wish like solid colors, or rainbow or a pre-defined patron. Thank you!
It’s a b s o l u t e l y f l a w l e s s ! A museum piece for the ages! (and I’m guessing somewhere near $2100.00) Am wondering though, how to acquire the longest lasting, highest quality LEDs. Just SUPERB.
Very beautiful and fun! But, I didn't understand one thing; you can see in the description 3 plates: DMS-321, DMS-308 and DMS-307. Are they different versions of the project and, therefore, should they be purchased, or one or the other? Thanks for sharing
Why are you supplying the board via 5V + VIn simultaneously? The arduino website says: "The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board." You have a shunt doing this!!! Can you explain to all of us? Thank you. Best regards. Paulo Doutel
Need a driver for my 60" TV display , instead of building an LED display. HDMI or video output. Something like that. NO DEVICE can do that yet. The RCA stereo inputs and effects are GREAT. Keep those. Downloadable spectrum analyzers are lousy. They consume CPU time, have slow inaccurate signal response and display a bunch of unwanted data. Its only the bit-perfect pretty bar graph display I want. Think of all the audio and home theater enthusiasts with huge displays between their speakers. Put it in a decent metal chassis with good connectors and a cable. You'll sell a thousand for $299 shipped. Still hoping & terrific work so far.
Hi Platinum! Your work is awesome. There are no words needed! Big project, big result! Is it possible to get a DWG-data instead of a CDR? Most cutters work with DWG and I have no Corel Draw Software :/. Would be appreciated ;). By the way: PDF A and PDF B are empty? best regards
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
looks great! thank you for being so open with the design!
For those who may confuse easily, you may want to change colours on the wiring diagram for the leds. The colours for GND and + alternate between the strips. Which I'm not sure was intentional.
It's not a big deal for those who know what they're doing as they're just colours, but there's always a possibility someone may connect the GND and + led terminals 😊
wHAT DO YOU MEAN OPEN ? .. He won'r share the Sketch Code or the schematic the rest of the files are useles .. unless take out your credit card
Now that's dope. People can really make some cool, I would love to have that in my house.
Absolutely fantastic....I would love to buy this. Great work.
1500$ something in this range-
아주 멋지고 훌륭한 영상 잘 보았습니다.^^
작품이 너무좋고, 보는내내 흥미를 돚구
어주는 음악. LED의 화려한 테크닉이
보는 이들도 마음을 요동치게 했네요.^^
Let's Enjoying.^^♡♡♡
오오오 한국인이닷!!!
반갑습니다.
You're the best. Hello from Russia. Russia loves technical channels.
This is an amazing work of art, best regards
Bang teryata kmu orang indo ya bang. tak kirain orng luar negeri .auto subrecd klo gni. aq penonton setiamu bang dri video pertama smpai trahir. mntap bang smga sukses sllu. dan dimudahkan rezekinya oleh ALLAH SWT. امين 🤲🤲
Fantastic project keep going good job
Que trabalho espetacular coisa linda Parabéns ao Fabricante sucesso
Очень эффектно ! 👍
OMG, What a wonderful Piece of Craftsmanship!
Looks Awesome! incredible job!
Wes upload juga akhirnya hehe.. Mantap bang
What a super project flawless 👍👍👍👍👍
GOOD JOB, SKILL FULL. PATIENCE IS KEY. THEN WILL GET GOOD QUALITY.
I wery like this project love you 💞😘
Very well done. SUPER !!!
Nice work 👍👍 i 'm waiting for next video 😄😄
Mantap dan sangat indah dilihat
WOW very good 👍👍👍
Master piece
Would love to purchase this
looka great , i am love it
Is beautiful I'm sure it cost a fortune. Love it 😀
Очень красиво!
Beautiful 😌👏🏻
daaaaang thats sweet ... very cool idea
Would you sell one if we order it from you? I know nothing about how to do this thing even with instructions i am going to burn down the house.
precioso trabajo felicidades
Haces cosas espectaculares......✌
I miss your video idol, now it's 21 band spectrum analyzer 😲😲😲👍👌👊
Mega cool. you should use it as a clock when no music.
Right
Très bien vu
Nice builds platinum. I hope you get to 1million subs☺
thanks😀
I would like to buy one... looks amazing
Man awesome! Thx for sharing plans, I’l make similar soon :) Il use ESP32 with FFT lib and fastLED. It should be fine
Lindo !!!................Je Vox..........From Brazil............13/04/2021...........
Thank you for the very good video
Super 👍👍👍👍👍👍👍
Good job.
I love this video's
Terlihat cantik.
Where is the arduino code for the spectrum analyzer itself? I only see the code for the stand leds. Does it already come on the arduino?
- PLATINUM o Senhor dos LEDs !
como faço pra comprar um desse????
oh this is absolutely awesome! So this has a microphone that picks up the ambient sound too? That would be really cool. Is that toggleable? like if you just wanted to see the music's spectrum rather than... both i guess?
Đền led này giá bao nhiêu cho biết được không
That's pretty epic O.O
Muy bonito su trabajo
Mantap broo
Amazing 💗🔥
Hi, first this is awesome and I'm glad that you share code as well. I build it but half of the led's(each second column) are working from top down and I did use your way of connection exactly like is described. SO where you settings your array, or how do you sorting correct?
Beautiful
😍😍😍😍😍
Top eu compro se tiver a venda
Yours video always surprise me but sir one request plz make some coding type project using different types of module like esp32, uno, nano, etc. 🙂
Thanks 😊
It looks awesome!! Just wondering if you could share the arduino code for some undertanding about how to change the colors. Im not sure if it does automatically or you trigger by a button or potentiometer.
It would be awesome to change as you wish like solid colors, or rainbow or a pre-defined patron. Thank you!
Where can I get one and how much is it I need to know please!!!!!.
Please check in description
Iam first viewer
👍👍👍👍👍👍👍👍
Круто! Лайк!)
Mesmerising effect :)
anybody here in the USA own one of these? Or even the 14 band unit? Would like to hear what your inpressions are of a live unit. They sure are cool!!!
Wow! What is the thickness of acrylic?
Can we use WS2811 pixel LEDs
how much does such a beautiful thing for the interior cost ??
Can this tower, or the 28 band tower. finished units be purchased ready to use? Thanks in advance!
Marvellous
Nice one.👌 I am bad @ programming is it plug n play or sold we do additional programming to make it work. 🤔
Well done!!!
Please share fire effect code for matrix.... 🙏
I...
Need that.
It’s a b s o l u t e l y
f l a w l e s s !
A museum piece for the ages!
(and I’m guessing somewhere near $2100.00) Am wondering though, how to acquire the longest lasting, highest quality LEDs.
Just SUPERB.
I'M FROM INDONESIAN ❤️
Are these the same units im seeing for sale on Facebook.
Hi
Can you please let us know how much cost in INR? I want this product. Please let me know ASAP.
i made one, 6*2feet.. it cost me around 1.10 lac INR
Very beautiful and fun! But, I didn't understand one thing; you can see in the description 3 plates: DMS-321, DMS-308 and DMS-307. Are they different versions of the project and, therefore, should they be purchased, or one or the other? Thanks for sharing
it is 3 different versions 21 band, 14 band and 7 band you can choose one😊
@@PLATINUMKIT Can we use DMS-321 with 7 band ?
Can't., DMS321 for 21 band
ok how can i buy such a thing.
Menurut saya kalo mahal wajar sih,, karena yang mahal nya ada di coding Arduino Mega nya 😁😁😁
Betull 👍👍😅
Dan skripnya nggak bakal dijual 😁
Fantasticoooooooo
I want to buy this
I Can help you
Awesome
Love from Pakistan
Why are you supplying the board via 5V + VIn simultaneously?
The arduino website says:
"The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board."
You have a shunt doing this!!!
Can you explain to all of us?
Thank you.
Best regards.
Paulo Doutel
Muhteşem olmuş
Dẹp tuỵet vời
21 Band Spectrum analyzer arduino code please send the download link. Thanks!
donde encuentro este tipo de analizador?
is it possible to buy a ready-made project...?
Super
Good morning.
Need a driver for my 60" TV display , instead of building an LED display.
HDMI or video output. Something like that. NO DEVICE can do that yet. The RCA stereo inputs and effects are GREAT. Keep those.
Downloadable spectrum analyzers are lousy. They consume CPU time, have slow inaccurate signal response and display a bunch of unwanted data. Its only the bit-perfect pretty bar graph display I want. Think of all the audio and home theater enthusiasts with huge displays between their speakers.
Put it in a decent metal chassis with good connectors and a cable. You'll sell a thousand for $299 shipped. Still hoping & terrific work so far.
tell me the brand of glue. You can photo or link.
Its crystal glue for acrylic. Sorry Other place i dont know.
Please use acrylic glue and find in your online store😀
Bisa di aplikasikan dengan panel P4 RGB pak?
Ga bisa pak😀
Hi, how can I buy the DMS-321 V3 21 Band Spectrum Analyzer module kit? the link does not work.
Kann man solche Geräte bei ihnen käuflich erwerben?
Bang, kenapa gk buat video lg??
Hi Platinum! Your work is awesome. There are no words needed! Big project, big result!
Is it possible to get a DWG-data instead of a CDR? Most cutters work with DWG and I have no Corel Draw Software :/. Would be appreciated ;). By the way: PDF A and PDF B are empty?
best regards
Sorry about that and thanks for telling me. has been updated please try again and i have added dwg & dxf hope it works
@@PLATINUMKIT você tem para vender gostaria de comprar um sou do Brasil
Como puedo obtener un vumtro de esos
gap between upper and lower acrylics of your one is 2 mm no ?
Không biết cái này ở việt nam có không nhỉ
Zalo 0385860639 ạ
is there anyway to make your own dms-321 or to find schematics and code for it?
Great! Where to buy it and how much it would cost
Where I can buy this please provide a link
Hello. I like your work very much. Where are you from? How can I get this product? Great