Danke vielmals, du hast mir das Lebengerettet mit dieser ausführlichen Anleitung. Ladestecker und akku getauscht, zusammengebaut, alles läuft wieder einwandfrei
I just did the repair and on the charger port ribbon I broke off two little gold pins. Didn't think it was going to work proceeded with their repair and it works fine My phone's up and going
Hey awesome video my charging port flex connector broke with tiny pieces inside. Do have any idea how to remove them from the mother board ? Please help
Greast video..after i replaced the charging port though, now my fingerprint reader is gone. It doesn't show the fingerprint icon on my screen and there's no fingerprint settings now. It's acting as if there is no fingerprint reader hardware on the phone. Thoughts?
@@DIYGeardo thanks I tried having two succion cups coming from an old kit but it's way too hard man.... I can't find an opening after heating with the air dryer at the limits of what I feel the phone can handle (hotter seems dangerous.. Easely +75c) but still can't find my way in... While you seems to make it so easy Last time I changed the (mini) usb port of my phone it was a Samsung S2 I'm not very good at this stuff but still managed .. This time I think I'm gonna pay someone instead, I feel like risking destroying the whole phone (motherboard for exemple because of the heat or another part like the camera module) ... The manufacturing of theses smartphones has changed since 15 years.... Everything is tighter and way more complex... thanks for responding :). To get in feel I tried everything.... Wonder what it's gonna cost me in France .... Probably near 100$... 🤞 If you have a secret technical tip... Just to open it... I will take it haha, 100€ is a lot 🙏✌️
Anyone know where I can get a replacement usb port for the 8T in the UK? the link in the description is for Australia/USA/Hong Kong only. Struggling to find one online anywhere.
@@lostboy109. if they are fine, then you need to check the battery and charging port and finally the board.. if you seek a tech they can check the charging board for issues
I did this, replaced charging port, and charging is good. But now my speaker volume is very low and when making phone calls people can't hear me? What could I have done incorrectly to cause these issues.?
hi, i run into a little issue changing the charging port , when I disconnected the flexor cable from the logic board the port on the logic board was shredded to pieces and now there is nothing left to connect to, the phone has a 30 percent charge and I'm afraid there is no fix for this, please advise because I could not find the part online.
I have used onplus 8 for just 3 months I played games on it by using audio splitter after some time it stopped working as I have used all audio splitter and type c earphones available for OnePlus which good in quality and I have also cleaned usb port and reset my device as my device is charging well but not supporting audio when inserting audio splitter . What's solution?
@@DIYGeardo i know probably it's a main board flex. my speaker buzzer is knocking with video and after unlock screen. but i have another sound from another speaker 😁 it's crazy. what u think? fingerprint sensor doesn't work
@@DIYGeardo ahahha WAIT. I WATCHED your film 30th TIME and saw my mistake. I connected the main connector flex backwards. I'm idioiioit 😂😂😂 thanks for your movie and help ❤️❤️
Danke vielmals, du hast mir das Lebengerettet mit dieser ausführlichen Anleitung. Ladestecker und akku getauscht, zusammengebaut, alles läuft wieder einwandfrei
Thanks for your feedback.🙏
Great tutorial! You helped me out tremendously. Thank you from the States!🤙
Glad to hear that 🙏👍
Thank you. I haved used your video twice, i have a short memory haha. You helped so much.
Glad it helped!
This worked perfectly for me. Thank you so much! working like new now
Great to hear!
Really good step by step tutorial, even with the steps on how to reassamble it.
Thank you for the help.👍
Glad it helped
Very Helpful! thank you for making this video
Glad it was helpful!
Amazing!. Thanks so much for the effort you put into this!
Glad you enjoyed it!
Hey, are those screws you unscrewed same size? So i don't have to do a map of each screw
Thank you so much for doing this video! It helped me so much today.
Thanks for your feedback and support
excellent guide help me a lot thanks 👍
Thanks for your feedback
Excellent tutorial, works great for me. :D
Glad it helped!
Hi, If I replace the battery on oneplus 8t, will the 65 watt charger work? Or will it stop working?
Thank you from US 🙏🙏🙏🙏🙏🙏
Thank you too
I just did the repair and on the charger port ribbon I broke off two little gold pins. Didn't think it was going to work proceeded with their repair and it works fine My phone's up and going
Hey awesome video my charging port flex connector broke with tiny pieces inside. Do have any idea how to remove them from the mother board ? Please help
It is a flex cable you can replace the charging port connector easily
how can i send you a photo ?
Would i need to format my phone for this? And how much will it take to only change the port from the 1+ sevice centre please?
Not sure about the servicee centre cost, you do not need to format the device.
How do i replace my fingerprint scanner. The cable next to the haptic motor broke.
Greast video..after i replaced the charging port though, now my fingerprint reader is gone. It doesn't show the fingerprint icon on my screen and there's no fingerprint settings now. It's acting as if there is no fingerprint reader hardware on the phone. Thoughts?
probably you have damage or loose connection. The sensor is under charging port area. Can you please check for it.
thank you
You are welcome 🙏
thank you ❤
You're welcome 😊
Seems harder than I thought especially that heating pad.... Is it necessary? I have the whole kit other wise except the succion cup
You need to heat it to open the device.Otherwise the back cover will damage.
@@DIYGeardo thanks I tried having two succion cups coming from an old kit but it's way too hard man.... I can't find an opening after heating with the air dryer at the limits of what I feel the phone can handle (hotter seems dangerous.. Easely +75c) but still can't find my way in... While you seems to make it so easy
Last time I changed the (mini) usb port of my phone it was a Samsung S2 I'm not very good at this stuff but still managed .. This time I think I'm gonna pay someone instead, I feel like risking destroying the whole phone (motherboard for exemple because of the heat or another part like the camera module) ... The manufacturing of theses smartphones has changed since 15 years.... Everything is tighter and way more complex... thanks for responding :). To get in feel I tried everything....
Wonder what it's gonna cost me in France .... Probably near 100$... 🤞
If you have a secret technical tip... Just to open it... I will take it haha, 100€ is a lot 🙏✌️
What if the connector to the charging flex cable is broken?
not good. Need to replace
@DIYGeardo I ordered a part for the charging flex cable plug and a back glass cuz it's broken when I bought it
Great work..🤟🤟
Thank you! Cheers!
What kind of screwdriver did you use?
Philips screwdriver
After using your videos to change my battery and charging port, everything works great except now my phone wont transfer files between phone to pc.
That means something wrong with the port or settings after the replacement. Double check with the part. Is it a genuine one?
Anyone know where I can get a replacement usb port for the 8T in the UK? the link in the description is for Australia/USA/Hong Kong only. Struggling to find one online anywhere.
You can purchase from hk and can get deliver within 5 days via royal mail international
My Oneplus 8T connects and disconnects from the 65w charging. Does anyone know what the solution is other than cleaning the charging port?
Replacing with a new port..
Oneplus8T slow battery charge How do you do it?
Have you reset the phone?
@@DIYGeardo yes i do
@@lostboy109. have you change the cable and adapter?
@@DIYGeardo yes i do
@@lostboy109. if they are fine, then you need to check the battery and charging port and finally the board.. if you seek a tech they can check the charging board for issues
I did this, replaced charging port, and charging is good. But now my speaker volume is very low and when making phone calls people can't hear me? What could I have done incorrectly to cause these issues.?
You got a bad microphone on the charging port.
hi, i run into a little issue changing the charging port , when I disconnected the flexor cable from the logic board the port on the logic board was shredded to pieces and now there is nothing left to connect to, the phone has a 30 percent charge and I'm afraid there is no fix for this, please advise because I could not find the part online.
you mean the connector in the logic board ?
@@DIYGeardo yes unfortunately
hello good video, a question where did you buy the flex port for this model?
it is on our store.
I have used onplus 8 for just 3 months I played games on it by using audio splitter after some time it stopped working as I have used all audio splitter and type c earphones available for OnePlus which good in quality and I have also cleaned usb port and reset my device as my device is charging well but not supporting audio when inserting audio splitter . What's solution?
Did you got any solution because i am facing same issue in OnePlus 8T
I changed the port with new one. Whole flex I buyed new one and bought it and changed it. There was no any solution.
Cost bro?
About $15
You have long nails. Do they help?
Yeah long time back..
@Geardo heeeeelp. after USB replacement my fingerprint sensor is not working 😭 still "knocking" and doesn't work
what i made wrong?
Geardo heeeeelp. after USB replacement my fingerprint sensor is not working 😭 still "knocking" and doesn't work
Most likely a loose connection
@@DIYGeardo i know probably it's a main board flex. my speaker buzzer is knocking with video and after unlock screen. but i have another sound from another speaker 😁 it's crazy. what u think? fingerprint sensor doesn't work
@@DIYGeardo ahahha WAIT. I WATCHED your film 30th TIME and saw my mistake. I connected the main connector flex backwards. I'm idioiioit 😂😂😂 thanks for your movie and help ❤️❤️