Sir ik question hai LED Bulb ki ager ik smd light jal jaye to us ko jumper k bajaye Resistor lagaye to kon c value ki lagaye jo us k 7 ya 8 volt ko cover kar sakay Main nay 1k, 10k, 470ohm, 63k ye sub lagayi hain tamam jal jati hain plz guide karain.
Nice video, but my question is, what if you connect direct to the commutator bar which faces the slot instead of connecting to the third bar? Does it make any difference?
@@farooqmultitechnical3989 I mean I have seen most of videos when you connect the conductors to the commutator bar, you dont connect direct to the bar which faces the slot, rather you count three bars either forward from the slot or backwards and here is my question, what if you connect direct to the commutator bar which faces the slot? Without starting from the third bar ahead of the slot?
Sir wo ye puch raha hai ki....slot ke samne wale commutator segment par connection kyu nahi kar sakte....aapne 3rd commutator bar par pehla connection kyu lagaya....uska reason puch rahe hai
Well come Hamid Azizian my friend both armarture and field coils (stater) have diffrent technique winding,wire guage and turns are different so you can join me on my whats app for more details and related videos links. 0092 3458703248 thanks for watching and comment.
Farooq Bhai nice video buhat acha samjhaya hey apny ,, mujhy aik baat puchni thee ager fielde coil ke side ke winding short hey tu aik side wind ker sakty hain ? aik coil ke video bana do please ,, thanks
Well come Abrar Hussain my friend you can start from second commotator piece to the right infront of slat no 1. for more detail discuss contect me on my whats app no 0092 3458703248
very good video last time ap sy forward or revese ka pocha tha bhut clearly define kia apny Thank you so much u r real teacher✌️✌️
Thanks for watching and positive feadback have a nice day.
Thanks bhai ap bohat acha guide karty ho apka guide karny ka trika bohat acha ha ❤
Well come Chohan electric
Thanks for watching and positive feedback.
Very nice. Teaching mathod of Very fine thank you very much and Live Long Life with happiness.
Well come Munawar Hussain
Thanks for watching and positive feedback keep pray for me.
Very good. Please speak English .actually i don't understand your language. But it seems to be a good teaching ❤.
Well come Hamid
my friend i will upload subtile in english so you can watch english very soon.
thanks for watching
Sir ik question hai
LED Bulb ki ager ik smd light jal jaye to us ko jumper k bajaye Resistor lagaye to kon c value ki lagaye jo us k 7 ya 8 volt ko cover kar sakay
Main nay 1k, 10k, 470ohm, 63k ye sub lagayi hain tamam jal jati hain plz guide karain.
umair there are only 3 volts are required for a LED
so you can use less than 100 ohm and up than 50 ohms
Good video
thanks
Beautiful video
thanks
Very nice video
ok
Nice video, but my question is, what if you connect direct to the commutator bar which faces the slot instead of connecting to the third bar? Does it make any difference?
Friend thanks for watching.
your question is un completed so write again what do you mean.
@@farooqmultitechnical3989 I mean I have seen most of videos when you connect the conductors to the commutator bar, you dont connect direct to the bar which faces the slot, rather you count three bars either forward from the slot or backwards and here is my question, what if you connect direct to the commutator bar which faces the slot? Without starting from the third bar ahead of the slot?
Sir wo ye puch raha hai ki....slot ke samne wale commutator segment par connection kyu nahi kar sakte....aapne 3rd commutator bar par pehla connection kyu lagaya....uska reason puch rahe hai
Good ❤️❤️
Thanks for watching
Is armature and stature have different thickness? It's mean that both of them are 29 swg or not? Please explain a little. Thanks ❤
Well come Hamid Azizian
my friend both armarture and field coils (stater) have diffrent technique winding,wire guage and turns are different so you can join me on my whats app for more details and related videos links.
0092 3458703248
thanks for watching and comment.
@@farooqmultitechnical3989 thanks. You are very kind .❤️🙏
@farooqmultitechnical3989 my friend dear mr farooq. I sent you a few messages please see them if you are not busy . Thank you again ❤️
love u sir😊😊
Well come my friend
thaks for watching
Farooq Bhai nice video buhat acha samjhaya hey apny ,, mujhy aik baat puchni thee ager fielde coil ke side ke winding short hey tu aik side wind ker sakty hain ? aik coil ke video bana do please ,, thanks
Well come Teaser Jatt
thanks for watching my friend you can wind single side coil wich is short very soon I will upload this video
Caiion
Well come Thiru thanks for watching.
pease write in english us.
Armature aur field welding ki tar mein Kitna fark hota hai
Well come sadam
Minimum 4
Maximum 6
Sar char aur 6 se kya Murad hai iski turn ya size tyre size
Can u try to give subtitle to ur videos
Forward winding ka start kahan se len ge aur reverse winding ka start kahan se len ge plz
Well come Abrar Hussain
Thanks for watching you come on my whats app no 0092 3458703248 for detail discus .
Bro start kahan se Lena huta hai means kon se segment se start kerte han
Well come Abrar Hussain
my friend you can start from second commotator piece to the right infront of slat no 1.
for more detail discuss contect me on my whats app no
0092 3458703248
सर कमेंटेटर कहा से मिलेगा
Mazdori kitni leee winding ki sir
Well come Nadeem
According to tha market parts rate
Thanks for watching
@@farooqmultitechnical3989 phir b 1idea kitni bnti hy mazdori
Armature ko warmish ni kia
well come munir
armature is compleated with warnish