How To Build A DIY Camera Dolly
HTML-код
- Опубликовано: 11 окт 2024
- Dolly Gear List:
(2) Pieces of ¾ Inch MDF cut to 30"X30" or 32”x32”
Wood glue
(2) 28" long, 2 Inch aluminum angle stock or 30” (depending on size (2 Inches short)
(2) 10-foot sections of 1 ¼ inch schedule 40 PVC
Drill
Electric Drill
Metal Drill Bits
5/16 inch drill bit (for wheel bolt holes in aluminum angle)
5/16 inch drill bit (for carriage bolt holes in MDF)
3/8 inch drill bit (for carriage bolt holes on aluminum angle)
For The Wheels
(8) Longboard Wheels -- High/Med Hardness (Standard Bearing Size - FIts 5/16 Bolt)
(8) 5/16 inch hex bolts 2 ½ inches long
(40) 5/16 inch flat washers
(8) 5/16 inch stop nuts (also known as locking nuts)
(8) Nylon or metal spacers ⅜ in. ID x 1 in. OD x ⅜ in L
For the MDF and Metal Stock
(4) 5/16 inch carriage bolts 3 - 3½ inches long (trim to size after install) (Hack Saw)
(4) 5/16 inch lock washers
(4) 5/16 inch hex nuts
Cinematography & Filmmaking Discord Chat: / discord
Check out East Waves (use the code “Carlo” at checkout for 20% off): eastwavesco.com/
Instagram Photo Grid Template: sellfy.com/vae...
My Instagram: / carlostigs
My Gear: (Amazon Links: The links in this description may be affiliate links that allow me to earn a small commission (at no extra cost to you) that keep this channel going. Thanks for your support!)
My Favorite Cinema Camera: amzn.to/3juSknb
Beast Key Light: amzn.to/35kpZuJ
Favorite Lens: amzn.to/2S9bQcK
Second Favorite Lens: amzn.to/2Gnyzzb
Portable RGB Lights: amzn.to/2KjJvjs & amzn.to/2LY8IAo
Nifty Fifty: amzn.to/30nqaCK
Super Unique Lens: amzn.to/3478MTY
Diffusion Filter For Lens: amzn.to/2HEqK8F
My RUclips Lighting Kit: amzn.to/2EPXsTI
Easy-to-use Neg/Bounce Board: amzn.to/3otfrkj
Affordable LED: amzn.to/3qqFc6l
Really Cool Light Attachment: amzn.to/3jhakBl
My Fav LAV Mic: amzn.to/30KukVJ
Affordable On-Camera Mic (Mirrorless/DSLR): amzn.to/3iJsxpO
Better On-Camera Mic (Mirrorless/DSLR): amzn.to/30LigU2
V-Mount Battery: amzn.to/2S9Zb9t
Slim V-Mount Battery: amzn.to/2GcKOyH
C-Fast Card: amzn.to/2GhroIF
My Monitor: amzn.to/30loPwy
My Hazer: amzn.to/2Ib8LHm
Diffusion Fabric: amzn.to/3nvZoCo
Diffusion Fabric (Muslin): amzn.to/2GGAJKx
Small Rig Cinema Camera Kit: amzn.to/3cKLNCf
My Decent Tripod: amzn.to/2HJZJ3T
Easy to use C-stand: amzn.to/34JadIK
My Harddrive: amzn.to/2GiTUcW
Love your video. I made this 32 inches and used angle stock with pre-made holes instead to make sure they were true. The 32 inch can hold 2 tripods side by side (tight and wide shots simultaneously). We used this for our church's livestream. We love it.
loved the shots at the end brother. getting better everyday
Love you
Nice footage. When drilling in metal I recommend using a drop of oil on the hole this will extend the life of your drill bits.
Test footage….lies. That was the most intriguing garage DIY movie I ever saw. Lol. Fire brother. Appreciate the blueprints and walk through. Wear gloves. Wear masks. Wear goggles. Drink water. Peace.
Wow that footage looked absolutely professional. All that time put in was worth it.
You should make this into a business!!!!🔥🔥🔥
Hahahaha were thinking of it!
Awesome- so happy to be using this DIY equipment with you, bro. Enjoyed seeing how you made this ;)
:) thanks Daeil!
Hi Carlos I'm here by Danny, happy to watch and learn stuff here in your channel. Cheers from Venezuela. 🤓👍🏻
Welcome!
Hey man .. just seeing you grow day after day makes me so happy man .. you inspire me a lot man so much ... thanks for doing this .. love the shot at the end 💪🏿💪🏿💪🏿💪🏿
Thank you so much man means a lot
7:39 :D:D someone was sleeping during editing. nice video, thanks for the guide.
Yesssss dude well done!
:)))
Next time, I suggest you try three-quarter inch plywood instead of the MDF. MDF holds its dimensions very well, but it doesn’t hold fastenings very well, and it’s not going to be as strong as plywood would be.
Dope video... Im going to try and make one of these for myself! :)
Thanks carmine!
Amazing, I am going to make my own soon!
Good luck!
why did u guys put the wheels like that instead of inline? thanks
Dude this is sick 🔥
Thank you brother
you said nothing about the rails you used?….
who else is waiting for this after seeing that ig story? ✋✋✋
Hahaha thank you :)
Jeeeeez! How did you plan this? Great footage as well!
Hahahah Idk we just kind did it one day
Making this in 2023. Total coming up just short of $200 (when you have all the tools)
hey! love this video. probably gonna be trying this for our short. do you have a roundabout number of how much this dolly came out to be? (only taking into account the needed items,--not the times you replaced things)
edit: it's possible i missed the full $ amount somewhere in the vid lmao
I made one and for some reason it's a little bit shaky when filming on it, did you add stabilization in post or is yours really that smooth?
For me it was smooth
Add sandbags to it to add weight
@@carlostigs Thanks, I'll try that, but do you think having ball bearings in the wheels could help? I think the longboard wheels do have that right?
If you used MDF for the base, I think it’s less rigid than plywood would be. For that dimension, probably three-quarter inch plywood.
Amazing brother. Thank you for being such an inspiration. Much love bro
Thanks brotha