First, you need to make a small indentation with a steal awl tool and a hammer (not a hole, but small dent for the drill bit point to sit in.). Then use a drill bit for metal, not wood. If, you need a large hole, start with a smaller bit then work up to the size you want. Another good tip is to use a small amount of machine oil when drilling. It lubricates the bit making it easier to peers the metal and lengthens the life of the bit. If you see smoke while drilling this means your burning the bit, and will almost instantly become dull. When this happens, just add another small squirt of machine oil. That's all folks!
The connection for the lighting is meant for a power supply, usually LED lights are 12V or 24V, if you have low voltage in the vending machine, just cut the connector off and connect the wires to some cable which gives out 12V or 24V, if not, u have to get a power supply.
You need a small (cigarette packet) size transformer. 110v (in the USA ) in 12 or 24 v out. Cut the wire that feeds the original light, add the transformer and stick to machine using double sided 3 m tape MAKE SURE YOU EARTH THE TRANSFORMER to a nut or bolt already on the machine. Then connect on the out put 12 or 24 v and run to your led light/s .
13:33 kicking the door up hard or rocking the machine. To stop the machine getting rocked bolt it to the floor or wall or put over 200kg of weights on the inside floor of the machine . To drop the door from making the racks jump when the door gets kicked. Put two stoppers inside so the door will no touch the bottom rack. This will stop the rack from jumping when the door hits the bottom rack. And this machine gives free stuff. when not packed properly.
If nobody won't say it I will; I'm proud of you guys. Classy, kind, funny, self made young King and Queen doing it the honest way. May my Father continue to bless you.
You need to customize your selections for each location better to optimize cash flow, I'd seriously put a survey up with simple check boxes and give them selections to choose from and see what they choose.
first things first card readers have spacers that goes inbetween the reader and the mounting plate, for future if you know you need to install a card read on a dixie-narco bring one, secondly, your snack machine looks like a crane, which means right above the key pad there is a black kick plate that comes out by loosening 2 screws in the back and the little plate slides out from the side, you will have to take the bill validator off to properly install the card readers bottom nuts, the reason to put it in that location and not the top of the machine is incase the person visiting your machine is in a wheelchair and dosent have the ability to reach the card reader, i also run a very successful vending company and like to see people in the trade succeed hope you get to read this.
The snack Vending machine you’ve got there is a crane national and they have the Sure vend technology if the product get stuck The vending machine vends again to get the product or it gives your money back
I think that Bevmax might be too large of a machine for that location... those machines can hold way more product selections than a regular 'old school' soda machine... I'm buying a Royal RVV500 tomorrow and I already have a high traffic location planned for it. The lure of the glassfront and the vast selection works best in very high traffic areas from what I've been told.
So its harder to drill through hard materials like ketal, which makes it hard to stay steady. To keep your holes neat in hard material, drill pilot holes (a small hole in the center of where you want the hole)then go up in increments
Hey if you wanna know why the rolos fell for free it's because anything that's a cylinder shape cany can some times get stuck and one behind it comes forward and there gives them 2.
Drill steel slow with pressure. Stop and let your bit cool after a few seconds. The problem you have is called walking. The bit is moving on the surface. Find yourself a center punch and a hammer. Use the pointed center punch to make a small divot in the spot you want to drill. This will keep the bit from walking until the hole gets started. You can also get a spacer from nayax to push the reader out farther.
Try to buy a drill bit made from a Harder metal. Also, make a pilot hole or push the bit into the metal for the drill bit to sit inside while you are drilling.
The drill bits I really cheap get the nicer ones they will drill a lot better and last a lot longer also get a center punch that makes it so the drill doesn’t wobble
1 of very earliest experiences was a machine I purchased & trusted I had the only key. Seems the old owner's teenage son also had a key & stole the money inside. He was asked to refill the Fanta by the staff & when I arrived I was confronted by staff asking if I had brought Fanta. He stole all the money the day before I visited he was asked to refill Fanta by staff. He later pretended to not know his dad had sold that machine. I immediately replaced the lock & demanded compensation.
@@thenoicemango1827 I called the owner who called his son who coughed up the $$$$$ I counted stock on hand & deducted from what I stocked the machine with - about $105 AUD all up. Junior was told to hand over the keys & anything else that belonged to that machine. Dad was embarrassed & as 18 is the legal age Junior was able to be charged as an adult if I pushed it
Something you should have taken into concideration each time you purchase a vending machine always change the card reader to your own to avoid a similar mishap again....However you should endeavor to claim your money back.
Hello Jaime great video as always. How many vending machines do you have? Just wondering. Maybe you should ask politely 50/50 chance you will get your money back is better then 0 chance if you let it go. Take care and God Bless
Next time you negotiate to buy, offer a dollar as a joke. If you sell, ask for a trillion, again as a joke. That way you can exploit the anchoring effect and get a better overall offer for you.
You must put the Monyx Number in the display on your Nayax card reader so your customer can use the Monyx app to pay in the vending machine. Just contact Nayax and they will fix this if you dont have your own user login. Each machine have their own number and this can easily be changed remotely. Don´t put the DEX connectors together like that, just let them hang loose. DEX is an old inventory system used in some machines. Use the spacer to put the card reader further out of the front panel. This should be included with the Nayax, otherwise order this. Aren´t you using contactless cards with NFC in the US? Here in Sweden we have had the contactless cards for several years now an almost all vending machines only accept contactless or chip cards. Our bank offices don´t handle cash here any more so most of the people use cards instead.
Use a Brad point drill bit, or a paddle drill bit. Start first with a smaller size, then work your way up my guy 😁😁 I enjoyed the content as well as always, keep it up guys!!!!!
Question -How do you find vending machine locations? -What percentage of what you make goes to the people of the location for letting you place your vending machine there?
You can’t act like a high roller if you’re playing dumb for not knowing how to use USED gear. I would keep the money of some one was using my old credit card reader and ‘forgot’ to put their info in it
Hey jaime i have an idea for you and elizabeth, i went to a town house that is zoned for commercial use. Town houses are cheaper then multi family so i had the idea that maybe it would be a good start for you, but heres the cool part the first level of the townhouse is closed off and can be run as a business my idea was that maybe u can put a vending machine store there that way your home will be making you money and it will be considered an asset just like what graham says lol you live on the top floors and maybe ud like the idea! I took a video for you guys showing you the layout of the homes, im pretty sure texas wud have these layouts to, and i have a feeling elizabeth is going to love the design lol hope you guys are doing good!
Next time they sell you a vending machine with their card reader just disconnect their card reader and put a "card reader temporarily offline. Cash only" hope that helps! & hopefully you get your money!
I'm a new subbie, but can u tell us where we can buy vending machines, how to get placed in a store, do you do a contract with the company, and do you pay the company a percentage of your profits? Also, is there a vending machine ap that can keep you aware of your vending inventory i/o having to visit the location ahead of time? Ty
you can also shake the redbulls (and the cheap waters in the thin pastics bottles) out if you bump the machine good enough... dont ask me how i know...
The college i went to a few years ago had a vending machine which ONLY accepted coins (athough there again in the country where i live i have yet to see a vending machine that accepts banknotes or even cards) that machine took 5p, 10p, 20p, 50p, and £1 coins if i remember correctly
The Red Bull 8oz is fine in the Bev Max machine you have. That's a Shimless machine. They were Referring to the Glass fronts that use Shims. However! you should consider Red Bull 12oz.
well, You can claim the money from prev owner right? All u gotta do it's Just make a call and ask the prev owner to wire the money to u. It's Eazy unless you dont have the prev owner numb or email add....
For your Red Bull situation you can sell 12oz or higher and you might want to put red bull in your warehouses because those guys need it some days. Plus no one wants to spend 2.00 for an 8.4 where they can spend another .50 for a 12oz
I'm pretty sure it's a BevMax 2 or 3. Quite a few problems with these machines however as they have to go through so any steps just to drop a bottle or can. The original BevMax 1 was a simple gate mechanism/ solenoid that released the can but it would fall down into the dispense bin so needs to be left for a minute or so but never really go wrong.
You should try to put some yoohoo in the machines. Its pretty good. You can either used the glass bottles or the cans. I think it would sell pretty well.
Maybe nobidy is getting redbull because its the little cans of redbull conpares to monsters being so big available next to it. Are your monsters and redbulls the same price?
also if you see this, I'd suggest maybe using a smaller drill bit first to sort of make a pilot hole, and then use a bigger drill to make the hole bigger on the machine my g, if you tryna make the hole more circular lmfao
So all the people saying you need a drill punch and all this crap. Literally all I do is: Put the drill in reverse and drill on the spot you want the pilot or the spot you would use a punch. Just run the drill in reverse for 1-2 seconds then flip the direction and the bit will immediately bite without walking all over the place. I use this method because I don’t wanna carry extra tools like punches and crap. So I use the bit itself. Just drill counter clock for 1-2 seconds.
2.50 for your redbull is kinda pricey if you think about it. you can get a better deal and at store on the way into work. I understand convenience but if they fill like they are getting ripped off they wont buy it.
Jeff Huerta first it would go to small claims court and not need a lawyer second can sue for legal fees also can sue for fraud depending on the situation
Hey Jaime quick question, why didn’t you just unplug the owners credit card machine, before you even got yours? It’s probably a silly question, but I just wanted to know
Should I tell the previous owner to pay me back?
Yes
Jaime Ibanez yes you should you bought the machine it’s your money
Yes that is your money
Jaime Ibanez it depends
Yes
if you're trying to get a perfect hole drilled, start with a small one, and use like 2 or 3 others and work your way up
Derek Bradshaw this its called a pilot hole i think
Don't bother with individual drill bits. Just use a step drill. Easier and better control of the sizes.
fire surfer they work great I love them
That hole is awful. Try dynamite next time.
But he also does it diagonally which could affect it too
Come on man think back to your humble beginnings... every cent counts don’t let anyone cheat you jaime
Cesar Rodriguez that’s right man 🙏 the owner set I can keep the readers so it might make up for it once I find out how much she got
The readers should just be part of the price of the machine wth
Ask to keep the readers and teach you how to drill a circle
I agree 💯
One of the first videos I ever watched was when Jaime installed a CC reader on a machine and I was hooked!
Benjie bro i remember that haha!
@@jaimeibanezz This vid was bringing back those OG vibes, Keep crushing it brotha!
First, you need to make a small indentation with a steal awl tool and a hammer (not a hole, but small dent for the drill bit point to sit in.). Then use a drill bit for metal, not wood. If, you need a large hole, start with a smaller bit then work up to the size you want. Another good tip is to use a small amount of machine oil when drilling. It lubricates the bit making it easier to peers the metal and lengthens the life of the bit. If you see smoke while drilling this means your burning the bit, and will almost instantly become dull. When this happens, just add another small squirt of machine oil. That's all folks!
The connection for the lighting is meant for a power supply, usually LED lights are 12V or 24V, if you have low voltage in the vending machine, just cut the connector off and connect the wires to some cable which gives out 12V or 24V, if not, u have to get a power supply.
You need a small (cigarette packet) size transformer.
110v (in the USA ) in 12 or 24 v out.
Cut the wire that feeds the original light, add the transformer and stick to machine using double sided 3 m tape MAKE SURE YOU EARTH THE TRANSFORMER to a nut or bolt already on the machine.
Then connect on the out put 12 or 24 v and run to your led light/s .
13:33 kicking the door up hard or rocking the machine. To stop the machine getting rocked bolt it to the floor or wall or put over 200kg of weights on the inside floor of the machine . To drop the door from making the racks jump when the door gets kicked. Put two stoppers inside so the door will no touch the bottom rack. This will stop the rack from jumping when the door hits the bottom rack. And this machine gives free stuff. when not packed properly.
When you are drilling a big hole you want to start from a small size drill bit to work your way to the size you need.
If nobody won't say it I will; I'm proud of you guys. Classy, kind, funny, self made young King and Queen doing it the honest way. May my Father continue to bless you.
hold the drill straight and even and u can drill a perfect hole you holding up and at a angle
RBSellerz it was a Ryobi drill give him a break
Those are drillbits for wood that’s why they keep waisting you need all purpose or metal ones
You need to customize your selections for each location better to optimize cash flow, I'd seriously put a survey up with simple check boxes and give them selections to choose from and see what they choose.
first things first card readers have spacers that goes inbetween the reader and the mounting plate, for future if you know you need to install a card read on a dixie-narco bring one, secondly, your snack machine looks like a crane, which means right above the key pad there is a black kick plate that comes out by loosening 2 screws in the back and the little plate slides out from the side, you will have to take the bill validator off to properly install the card readers bottom nuts, the reason to put it in that location and not the top of the machine is incase the person visiting your machine is in a wheelchair and dosent have the ability to reach the card reader, i also run a very successful vending company and like to see people in the trade succeed hope you get to read this.
Do you need a business license if you only own one soda machine in a car repair shop?
When drilling a hole use cutting oil....also try a stepper bit. That looks like what they used for the hole.
What size stepper but can be used ??
Awesome video Jaime I love when you collect the money from your vending machines bro 💪
Santoro Aquatics thanks bro! Collection video coming soon (:
9:25 buy yourself a step drill. Perfectly round holes of nearly any size. problem solved
What size step drill would he need ??
The snack Vending machine you’ve got there is a crane national and they have the Sure vend technology if the product get stuck The vending machine vends again to get the product or it gives your money back
I think that Bevmax might be too large of a machine for that location... those machines can hold way more product selections than a regular 'old school' soda machine... I'm buying a Royal RVV500 tomorrow and I already have a high traffic location planned for it. The lure of the glassfront and the vast selection works best in very high traffic areas from what I've been told.
Love seeing the come up of someone. Much blessing
So its harder to drill through hard materials like ketal, which makes it hard to stay steady. To keep your holes neat in hard material, drill pilot holes (a small hole in the center of where you want the hole)then go up in increments
Hey if you wanna know why the rolos fell for free it's because anything that's a cylinder shape cany can some times get stuck and one behind it comes forward and there gives them 2.
Drill steel slow with pressure. Stop and let your bit cool after a few seconds. The problem you have is called walking. The bit is moving on the surface. Find yourself a center punch and a hammer. Use the pointed center punch to make a small divot in the spot you want to drill. This will keep the bit from walking until the hole gets started. You can also get a spacer from nayax to push the reader out farther.
Try to buy a drill bit made from a Harder metal. Also, make a pilot hole or push the bit into the metal for the drill bit to sit inside while you are drilling.
LOVE THIS COUPLE ! WE NEED A REALITY SHOW !!
That tornado destroyed my whole school
Hey, if you have to drill a hole through metal try a Dewalt cobalt bit. It works easier
You need to put some Bang in those machines...
The drill bits I really cheap get the nicer ones they will drill a lot better and last a lot longer also get a center punch that makes it so the drill doesn’t wobble
1 of very earliest experiences was a machine I purchased & trusted I had the only key. Seems the old owner's teenage son also had a key & stole the money inside. He was asked to refill the Fanta by the staff & when I arrived I was confronted by staff asking if I had brought Fanta. He stole all the money the day before I visited he was asked to refill Fanta by staff. He later pretended to not know his dad had sold that machine. I immediately replaced the lock & demanded compensation.
Matthew Brown Did you get the money back though?
@@thenoicemango1827 I called the owner who called his son who coughed up the $$$$$ I counted stock on hand & deducted from what I stocked the machine with - about $105 AUD all up. Junior was told to hand over the keys & anything else that belonged to that machine. Dad was embarrassed & as 18 is the legal age Junior was able to be charged as an adult if I pushed it
Something you should have taken into concideration each time you purchase a vending machine always change the card reader to your own to avoid a similar mishap again....However you should endeavor to claim your money back.
you have to make a pilot hole first and use a metal drill, the brass looking one is for wood only
It s simple the lights are led They run Off of 12volts or 24.volts look them up and buy an adapter and plug them in
I love your videos man every time I see them it makes me want to go into vending
Hello Jaime great video as always. How many vending machines do you have? Just wondering. Maybe you should ask politely 50/50 chance you will get your money back is better then 0 chance if you let it go. Take care and God Bless
The Lawnmower Man & Company hello! I currently have 15 👍 and you’re right I should ask, thank you ! God bless
Love your channel sooooo much!!!!!!
Next time you negotiate to buy, offer a dollar as a joke. If you sell, ask for a trillion, again as a joke. That way you can exploit the anchoring effect and get a better overall offer for you.
You must put the Monyx Number in the display on your Nayax card reader so your customer can use the Monyx app to pay in the vending machine. Just contact Nayax and they will fix this if you dont have your own user login. Each machine have their own number and this can easily be changed remotely. Don´t put the DEX connectors together like that, just let them hang loose. DEX is an old inventory system used in some machines. Use the spacer to put the card reader further out of the front panel. This should be included with the Nayax, otherwise order this. Aren´t you using contactless cards with NFC in the US? Here in Sweden we have had the contactless cards for several years now an almost all vending machines only accept contactless or chip cards. Our bank offices don´t handle cash here any more so most of the people use cards instead.
4th love your videos. Keep up the great content.
All you need for the soda machine is a couple of washers and your credit card will fit better.
Use a Brad point drill bit, or a paddle drill bit. Start first with a smaller size, then work your way up my guy 😁😁 I enjoyed the content as well as always, keep it up guys!!!!!
We here and now time to watch the video, I’ve been waiting for a video brother 😭
ClubAmerica92 sorry i haven’t uploaded bro! Haha 🔥
Jaime Ibanez always looking forward to new videos brother, you guys brighten up ones day. Hope you guys have a goodnight
Question
-How do you find vending machine locations?
-What percentage of what you make goes to the people of the location for letting you place your vending machine there?
Luxury Inc you literally drive around and ask companies!!! You draw up contracts...for a certain % that is it!!!
@@minisurfbanana how do you draw up a contract??
JKG any piece of paper with the terms of your agreement and have it notarized!
@@bmwf1joel Notarized. Thankyou.
You can’t act like a high roller if you’re playing dumb for not knowing how to use USED gear.
I would keep the money of some one was using my old credit card reader and ‘forgot’ to put their info in it
That makes you a thief then stupid
Great video bro 😁
Hey jaime i have an idea for you and elizabeth, i went to a town house that is zoned for commercial use. Town houses are cheaper then multi family so i had the idea that maybe it would be a good start for you, but heres the cool part the first level of the townhouse is closed off and can be run as a business my idea was that maybe u can put a vending machine store there that way your home will be making you money and it will be considered an asset just like what graham says lol you live on the top floors and maybe ud like the idea! I took a video for you guys showing you the layout of the homes, im pretty sure texas wud have these layouts to, and i have a feeling elizabeth is going to love the design lol hope you guys are doing good!
Next time they sell you a vending machine with their card reader just disconnect their card reader and put a "card reader temporarily offline. Cash only" hope that helps! & hopefully you get your money!
need a metal cutting bit, get a step drill bit for metal. The bits you have are ment for wood.
"I've never seen a connection like this" you serious? How old are you you never had a radio or boombox ?
he meant for his vending machines ofc. not he'd never seen one at all.
They should have given you the money that would be the right thing to do
I'm a new subbie, but can u tell us where we can buy vending machines, how to get placed in a store, do you do a contract with the company, and do you pay the company a percentage of your profits?
Also, is there a vending machine ap that can keep you aware of your vending inventory i/o having to visit the location ahead of time?
Ty
you can also shake the redbulls (and the cheap waters in the thin pastics bottles) out if you bump the machine good enough... dont ask me how i know...
"run kidz run"-jaime 2019 sup jaime been a minute since ive seen a vid school has me busy ash
The college i went to a few years ago had a vending machine which ONLY accepted coins (athough there again in the country where i live i have yet to see a vending machine that accepts banknotes or even cards)
that machine took 5p, 10p, 20p, 50p, and £1 coins if i remember correctly
The Red Bull 8oz is fine in the Bev Max machine you have. That's a Shimless machine. They were Referring to the Glass fronts that use Shims. However! you should consider Red Bull 12oz.
You should sell Keebler fudge stripe cookies or nutty bars in your vending machine
You can buy a tool to sharpen your drill bits :)
When you buy a credit card reader do you need a provider. I heard that some will take fractions of each product so it’s better to have a provider
Don't skimp on drill bits, that's the issue. Also it almost seemed like the drill was spinning to the left (don't know tough to tell on the video).
Jamie Ibanez next time try using drill
Bits for metal and not timber
Do you use your smaller camera when you are filming inside the building?
well, You can claim the money from prev owner right? All u gotta do it's Just make a call and ask the prev owner to wire the money to u. It's Eazy unless you dont have the prev owner numb or email add....
For your Red Bull situation you can sell 12oz or higher and you might want to put red bull in your warehouses because those guys need it some days. Plus no one wants to spend 2.00 for an 8.4 where they can spend another .50 for a 12oz
9:20 primero hace el agujero con una mecha chica, después usa una más grande y para que no patine la mecha, usa un trapo húmedo mientras agujereas
next time you drill a hole, drill a small pilot hole 1st with a small bit, then use the size bit you need :)
20 million trees donate to Mister Beast if you donate $1 you get one tree planted for you
I was getting f*** with online
What kind of vending machine is that? the one with the arm.
Stress Depression it’s a
I'm pretty sure it's a BevMax 2 or 3. Quite a few problems with these machines however as they have to go through so any steps just to drop a bottle or can. The original BevMax 1 was a simple gate mechanism/ solenoid that released the can but it would fall down into the dispense bin so needs to be left for a minute or so but never really go wrong.
@jaime ibanez i m looking to start a vending company, who do you use to process your credit card payments?
You should try to put some yoohoo in the machines. Its pretty good. You can either used the glass bottles or the cans. I think it would sell pretty well.
Yeah great video boss!!!!!
Maybe nobidy is getting redbull because its the little cans of redbull conpares to monsters being so big available next to it. Are your monsters and redbulls the same price?
does you credit card machine charge the customers any fee to use it? And how much does the credit card read charge you per transaction?
Your videos are so satisfyingggg hahaha 💖
Cant wait to see the new location
That’s also happened to me, the first week all credit card SALES was going to the previous owner of my new VENDING Location !!!
JH Vending it sucks!
Ik bro, but just like you I got cc shipped to my house and be able to install the one of my own 👊
In germany Red Bull is 1€, cheapest energy is 0,25€, in vending machines Red Bull is like 2,50€.
that edit at 9:00 got me dead, lmfaoooooo
also if you see this, I'd suggest maybe using a smaller drill bit first to sort of make a pilot hole, and then use a bigger drill to make the hole bigger on the machine my g, if you tryna make the hole more circular lmfao
At 11.00, I think Nayax Cashless system must be Connected to your bank account before you plug it in vending machine.
Right?
He ain't the brightest but he's learning lol good to see progress
He's pretty dim actually
Congrats on the new machine and location.
Ryobi is not gonna last if you plan To use it on a regular basis I would recommend checking into a Dewalt or Milwaukee
So all the people saying you need a drill punch and all this crap. Literally all I do is: Put the drill in reverse and drill on the spot you want the pilot or the spot you would use a punch. Just run the drill in reverse for 1-2 seconds then flip the direction and the bit will immediately bite without walking all over the place. I use this method because I don’t wanna carry extra tools like punches and crap. So I use the bit itself. Just drill counter clock for 1-2 seconds.
Charging extra for credit card purchases or eating it? If so how much?
You talk about low balling. What is the industry standard for pricing a vending location? Is it the machine? Or a percentage of the revenue generated?
you need to start with one of the smaller one's, and grab the one bigger size each time you've made a hole until the hole is big enough
2.50 for your redbull is kinda pricey if you think about it. you can get a better deal and at store on the way into work. I understand convenience but if they fill like they are getting ripped off they wont buy it.
The first thing you did wrong when drilling the hole was you started to big. Always start with a pilot hole.
Hi Jamie awesome video you should sell Keebler fudge striped cookies and nutty bars and congratulations on the new vending machine location
If you have record of that I would take it to court. "I guess I just lost money"..
😳 You can't be that gullible bro come on.
LOL, the lawyer and court fees are more than the amount he lost.
Jeff Huerta first it would go to small claims court and not need a lawyer second can sue for legal fees also can sue for fraud depending on the situation
Hey man you look very young and a businessman damn congrats bro I would actually like to own a soda and snack machine one of these days
Where do you buy your card readers?
#Jaimegang early gang
You should do a video of you showing us how much money you got from the first day you started your business
Thinking about starting this out what’s was the processs???please let me know just trying to get myself together...thanks man
You need to start with the smallest bit to let the big bits stay in one place there is my tip good luck
James
You should use some washers to bring that card reader out
tankerc31 I was just going to say this! Good thinking
Have you tried stocking your vending machine with weed and beer?
you must be 12. lol
He tried root beer
How about hookers?
Can't be sure but I think you had the drill going in reverse.
Hey Jaime quick question, why didn’t you just unplug the owners credit card machine, before you even got yours? It’s probably a silly question, but I just wanted to know
Jaimie it is because you have the drill bits that are made for wood. :D
You need to drill in a straight line with steady pressure. Straight line. You'll get it.