I bought this not even knowing how to sew and couldn’t understand the directions so I texted my crafty mom and she sent me a link to your videos and your a god send!! You explain things so well and repeat for us craft challenge people and now I’m using my machine and as soon as I’m comfortable I’ll graduate to a real machine and back to your videos!! Thenk you so much for putting time into this I was about to throw it at a wall!😂😂❤️
I finally find a video that is outstanding in showing how its done! Others dont explain exactly let alone show close up steps of how to do so even the singer company video dont show it this well I thank you so very much for this I only wish found your video long before my frustrating battle. All they needed to do really was to make a notch in the plate to slip the thread through an a area below that part of that thread would lay in for when the needle would come down it would be right in line that way no matter what.
This video really helped me. Very easy to understand and really helped. Keep up the good work your helping all of us who are new to sewing and crafts 💜💜💜💜
I just started using mine for the 1st time, and after a minute or so of sewing my fabric, the hand wheel got jammed and won’t turn at all, so the needle won’t raise. I can’t even figure out how to get my fabric out of the machine in order to see what’s wrong or anything… Pls help?
Does the green wheel on top of the machine just keep turning or does it stop and you have to turn it in opposite direction? My daughter's machine will only turn so far by hand then stops. I think hers was returned because someone broke it. She didn't have an instruction book and some of the pieces we have seen in videos are not in the box or the storage compartment. And both her bobbins were pre-threaded when she unboxed it. She is going to exchange it
I done all of these steps and I think it catches the bottom thread but after a couple of times turning the hand wheel, it gets jammed. Every single time and I can’t figure out why 😭
I will try and do another video this evening! In the meantime. Click the link below, not sure if I sent you this previously. docs.google.com/document/d/1rJrM6uuvNgYslHIFeTceZRsQeUSkLEQzSsX07FiW97A/edit?usp=drivesdk
ruclips.net/video/XNfL9NZCE8k/видео.html Click the above link for the video on how to wind the bobbin. docs.google.com/document/d/16brcENH1sD72UGbbHBYo-_YRq3C1xwslHQt-Eqk7vjI/edit?usp=drivesdk Click the above link for a Google Doc! Thanks, if you have any more questions, feel free to ask.
See picture by clicking the link. The thread comes through the hole between the feeder teeth; under the presser foot. #tfv drive.google.com/file/d/19geqYC3h8Ocyiy5kHl3bW0FuPuixgTgJ/view?usp=drivesdk
The needle thread (which is the thread needle) and the bottom bobbin thread is separate. They are to be pulled back to begin sewing. Here a guide that may help you! Click the link. docs.google.com/document/d/1Q_cRSuGRsk_SrQSgLc46j4dDdKV2zvYsO18W1951QhQ/edit?usp=drivesdk
Here is a more detailed description of "catching the bottom bobbin thread": Click the link below docs.google.com/document/d/17Gn8_1pVGoBDOvdXWa4w8BUeebJpH_zbtpemkxu_MQY/edit?usp=drivesdk
@@myownthriftythoughts6038 I am able to get the bottom thread up by using the little threading tool, but it won't stitch. I re-threaded the bobbins, changed the needle, redid every step. My machine will not stitch or catch the bottom thread on it's own.
In this case the tension may be too tight. Loosen your tension. Here a list of troubleshooting steps that my help: docs.google.com/document/d/1uxq-589jES62C1-Tejah_b4r7_MZ7A0T-xaId8eUyCc/edit?usp=drivesdk
Be sure the thread is just over the tension disc and not around it. Also, The best result to threading the SSQ ➕️ is with the presser foot up. This opens up the tension disc.
Oh no, I recreated the instruction with videos! Link below. If you have any other questions, please feel free to ask! docs.google.com/document/d/1uxq-589jES62C1-Tejah_b4r7_MZ7A0T-xaId8eUyCc/edit?usp=drivesdk
With gratitude! Thank you! Absolutely awesome tutorial! This is my first sewing machine lol. I appreciate you taking the time to make this video!🙏🏾🌻👑
You're welcome! I hope you enjoy it!😊
I bought this not even knowing how to sew and couldn’t understand the directions so I texted my crafty mom and she sent me a link to your videos and your a god send!! You explain things so well and repeat for us craft challenge people and now I’m using my machine and as soon as I’m comfortable I’ll graduate to a real machine and back to your videos!! Thenk you so much for putting time into this I was about to throw it at a wall!😂😂❤️
Oh wow! That makes my day! I am so glad that you and Mother got something from my videos! Happy sewing!🤗
I finally find a video that is outstanding in showing how its done! Others dont explain exactly let alone show close up steps of how to do so even the singer company video dont show it this well I thank you so very much for this I only wish found your video long before my frustrating battle. All they needed to do really was to make a notch in the plate to slip the thread through an a area below that part of that thread would lay in for when the needle would come down it would be right in line that way no matter what.
So both treats go true the needle?
Thank you!! I got it within seconds after spending hours watching other videos!!
Thank you! Very helpful instruction. My hands aren't very dextrous so I am amazed at how fast you threaded the needle!
RIGHT!
I have to use the little needle threading tool. She free hands it at arms length!
Impressed
I enjoyed the video and learned a few new things, thank you. I received the machine for a birthday gift!
Happy Birthday! Glad you enjoyed the video!
This video really helped me. Very easy to understand and really helped. Keep up the good work your helping all of us who are new to sewing and crafts 💜💜💜💜
Thanks!
OMG you thread the needle like nothing..amazing..i just got one from my wife..hope it works well
Thank you for all these wonderful videos I just bought it and this help me a lot!
Can you please make a video how to wind a bobbin? Please 🤗
Yes ma'am, I sure can! #tfw
@@myownthriftythoughts6038 aww you are my ángel!!
The video is up now! Happy Sunday and thank you asking!🤗
@@myownthriftythoughts6038 thank you 😊 I love your extraordinary videos super easy to understand and so detailed!!!
My tension rod fell off , can you do a video on how to put it back on?
Thank you!! I was able to get my bobbin going again quickly!
Glad it worked for you!
Thank you! I was struggling.
Extremely helpful and well done. Thank you
I still can’t catch the thread the needle just goes down and doesn’t catch a thing
I'm having the same issue
i feel like im missing something :( im following the instructions and video exactly but it wont catch
Its not catching for me i need help
Same
Did you figured how to?
@@javiergarcia-xe7oo nope 😭
Thread the needle with the bottom bobbin or top bobbin?
Omg thank you so much!!! I needed this.
Very nice useful to know about sewing
Thank you, thank you!
Total newbie question, but when I'm done sewing, do I need to tie off the threads, or does the machine do this automatically?
How to thread Singer Quick Stitch +:
docs.google.com/document/d/1yAzdfNjLFGHJuAZb_NLNofLIzAP4-v4H5Hehum1RQMQ/edit?usp=drivesdk
#singersewingmachine #sewingforbeginning #singerM3220
#sewingproject #sewingmachineforbeginners #sewingmachinethread
I just started using mine for the 1st time, and after a minute or so of sewing my fabric, the hand wheel got jammed and won’t turn at all, so the needle won’t raise. I can’t even figure out how to get my fabric out of the machine in order to see what’s wrong or anything… Pls help?
Thank you for this video!
You're welcome!
Thank you! I could not get that figured out!
this is very useful, thank u so much, have one never use it
Glad I could help! Hope you will finally use your machine they have really improved in terms of quality.
Does the green wheel on top of the machine just keep turning or does it stop and you have to turn it in opposite direction? My daughter's machine will only turn so far by hand then stops. I think hers was returned because someone broke it. She didn't have an instruction book and some of the pieces we have seen in videos are not in the box or the storage compartment. And both her bobbins were pre-threaded when she unboxed it. She is going to exchange it
Do you do one on one sessions. I just want to load, and learn how to hem my shirt😅
Thank you so much I was struggling so hard now I got it 💜
You should make a special video showing just how to treading the singer
Sure! I will do so today! Thanks
Thank you so much
I done all of these steps and I think it catches the bottom thread but after a couple of times turning the hand wheel, it gets jammed. Every single time and I can’t figure out why 😭
I will try and do another video this evening! In the meantime. Click the link below, not sure if I sent you this previously.
docs.google.com/document/d/1rJrM6uuvNgYslHIFeTceZRsQeUSkLEQzSsX07FiW97A/edit?usp=drivesdk
@@myownthriftythoughts6038 okay I’ll check it out! Thank you!
thank you so so much
Now i need to know how I put the Thread on a bobin
ruclips.net/video/XNfL9NZCE8k/видео.html
Click the above link for the video on how to wind the bobbin.
docs.google.com/document/d/16brcENH1sD72UGbbHBYo-_YRq3C1xwslHQt-Eqk7vjI/edit?usp=drivesdk
Click the above link for a Google Doc!
Thanks, if you have any more questions, feel free to ask.
@@myownthriftythoughts6038 Thank you
Thank you so much! ❤💚❤💚 your tutorial was so easy to follow and now im excited to start sewing ^¤^
I am glad the video helped you in some way!😊
Thank you!!!
Make sure it's in the locked position
Omg this helped a lot!!
Is the bottom thread always used?
Which zipper foot can you use with this sewing machine?
Not compatible.
Thank u..the directions are so confusing so i apprec this
Please help im having a hard time catching the tread under.
Im new to sewing, What is the bottom thread exactly supposed to go through?
Click the link for a guide. 😊Thanks!
docs.google.com/document/d/17Gn8_1pVGoBDOvdXWa4w8BUeebJpH_zbtpemkxu_MQY/edit?usp=drivesdk
@@myownthriftythoughts6038 Thank You soooo much. I was finally able to help my son with his puppet project! Great job!!
Lo e intentado muchas veces,y no agarra el hilo
Are you pulling the bottom thread through the eye of the needle?
See picture by clicking the link. The thread comes through the hole between the feeder teeth; under the presser foot. #tfv
drive.google.com/file/d/19geqYC3h8Ocyiy5kHl3bW0FuPuixgTgJ/view?usp=drivesdk
@@myownthriftythoughts6038 I still don’t understand does the bobbin go through the hole for the bottum thread?
@@myownthriftythoughts6038 And how can I get it though there?
I am going to link the sheet in which you can print or download and read! I am not home right now. As soon as I will be home in about hours.
Thank you so much for your help. I'm trying to set it up for my 11 yr old daughter.
This could have been even more helpfully you used to different colors. Thank you for sharing this helpfull
I been trying mine for hours and I cannot get the fucking bobbin to attach to the niddle
Do both threads need to be in the needle?
The needle thread (which is the thread needle) and the bottom bobbin thread is separate. They are to be pulled back to begin sewing.
Here a guide that may help you! Click the link.
docs.google.com/document/d/1Q_cRSuGRsk_SrQSgLc46j4dDdKV2zvYsO18W1951QhQ/edit?usp=drivesdk
@@myownthriftythoughts6038 awesome. Thank you 😊
You're welcome 😊
No matter what I do, mine won't catch the bobbin thread. I don't know what to do.
Here is a more detailed description of "catching the bottom bobbin thread":
Click the link below
docs.google.com/document/d/17Gn8_1pVGoBDOvdXWa4w8BUeebJpH_zbtpemkxu_MQY/edit?usp=drivesdk
@@myownthriftythoughts6038 I am able to get the bottom thread up by using the little threading tool, but it won't stitch. I re-threaded the bobbins, changed the needle, redid every step. My machine will not stitch or catch the bottom thread on it's own.
In this case the tension may be too tight. Loosen your tension. Here a list of troubleshooting steps that my help:
docs.google.com/document/d/1uxq-589jES62C1-Tejah_b4r7_MZ7A0T-xaId8eUyCc/edit?usp=drivesdk
@@myownthriftythoughts6038 I messed with tension too. Maybe mine is just faulty...
Be sure the thread is just over the tension disc and not around it. Also, The best result to threading the SSQ ➕️ is with the presser foot up. This opens up the tension disc.
I tried doing that it never worked
Its help me so much ! 🧡 THANKS FOR YOUR HELPFUL VIDEOS ❤
You are welcome!
Please tell me price?
This little machine sucks. I am following the instructional verbatim. AAAA! It doesn't work.
Oh no, I recreated the instruction with videos! Link below. If you have any other questions, please feel free to ask!
docs.google.com/document/d/1uxq-589jES62C1-Tejah_b4r7_MZ7A0T-xaId8eUyCc/edit?usp=drivesdk
Appreciate the effort but the video was kinda of garbage tbh. Thanks for the effort for real though
Thank you!!!