Thank you for this video. I would have never thought of something like this. Keep posting your videos. There are always going to be people who are either disagreeing or spammers.
Thank you, your video helped me out. The issue I had was when I made an upgrade I moved the micro switch without knowing it. The nozzle kept moving up when I autohomed. The metal part of the switch was pressed against the bar. So I loosened it and realigned it, the problem was fixed.
my issue has nothing to do with wiring. I didnt start having this issue until I updated the firmware after installing a CR Touch. Ever since the extruder has been in reverse and now that I found the "right" firmware for it, its giving me this error in the video. It literally auto-homed just fine not 5 minutes before I flashed the Ender-5 Pro- Marlin2.0.1 - V1.1.1 - ALT firmware and trying to revert does not solve the issue of a reversed stepper motor on my 4.2.7 board. No Im not fucking with the wire connections like trolls would recommend. I just plugged it in normally like it was when it came out of the box.
when i try to home my 3d printer it dose the 1 step the the thing that hold the film starts spiting it out and i cant figure out if i wire it wrong or what and theres no videos about it do you think you could help
I updated my firmware last night, from 4.2.2 to 4.2.7, and now i have no XYZ & E movement, i try to auto home, it pauses form like 5 sec, then i get a message come up "Homing Failed, PRINTER HALTED, Please Reset". I Have tried to remove the micro switches, even the CR touch, but still not movement. Can anybody help please?
Thank you for this video. I would have never thought of something like this. Keep posting your videos. There are always going to be people who are either disagreeing or spammers.
Thank you,
your video helped me out. The issue I had was when I made an upgrade I moved the micro switch without knowing it. The nozzle kept moving up when I autohomed. The metal part of the switch was pressed against the bar. So I loosened it and realigned it, the problem was fixed.
Glad it helped
how did you take it out so easy
explain better please
my issue has nothing to do with wiring. I didnt start having this issue until I updated the firmware after installing a CR Touch. Ever since the extruder has been in reverse and now that I found the "right" firmware for it, its giving me this error in the video. It literally auto-homed just fine not 5 minutes before I flashed the Ender-5 Pro- Marlin2.0.1 - V1.1.1 - ALT firmware and trying to revert does not solve the issue of a reversed stepper motor on my 4.2.7 board.
No Im not fucking with the wire connections like trolls would recommend. I just plugged it in normally like it was when it came out of the box.
when i try to home my 3d printer it dose the 1 step the the thing that hold the film starts spiting it out and i cant figure out if i wire it wrong or what and theres no videos about it do you think you could help
i dont understand, can you explain better and ill try to help
I updated my firmware last night, from 4.2.2 to 4.2.7, and now i have no XYZ & E movement, i try to auto home, it pauses form like 5 sec, then i get a message come up "Homing Failed, PRINTER HALTED, Please Reset". I Have tried to remove the micro switches, even the CR touch, but still not movement. Can anybody help please?
you may have used wrong firmware file. can you flash it back to how it was?
I bought a new chip and its arriving tomorrow i hope it works😢
fingers crossed
@@shorty4901 it works!! Thank you so much
hopefully I don't need to buy a new switch