Turbochargers Explained | How Single, Twin-Scroll, VGT & Electric Turbocharger Works?
HTML-код
- Опубликовано: 28 май 2024
- Turbochargers Explained | How Single, Twin-Scroll, VGT & Electric Turbocharger Works?
Turbocharger:
A turbocharger often called a turbo, is a gas compressor. It is used to force air into an internal combustion engine. A turbocharger is a form of forced induction.
It compresses the intake gas forcing more air into the engine to produce more power for a given displacement. They have greater power density, and they are more efficient. A turbocharger is connected to an engine to give it more power.
At the most basic level, a turbocharger consists of just three major components: the turbine, the compressor, and the bearing system that supports the turbine shaft, connecting the turbine and compressor wheels together.
Working:
As the engine is running, the exhaust gases would otherwise be wasted, but on a turbocharged engine, these exhaust gases pass through the turbo, which spins one fan called the turbine.
The turbine wheel is responsible for converting heat and pressure into rotational force. As the turbine wheel rotates, it spins the turbine shaft, which spins the compressor wheel.
As you see, the compressor wheel has a fixed connection to the turbine wheel via a standard shaft, so when the turbine wheel spins, the compressor wheel also spins. The compressor’s job is to suck air into the turbocharger, pressurize it, and force it into the engine intake manifold. And from there, into your combustion chamber, this air compression helps turbocharged engines produce more power at normal atmospheric pressure.
Components of Turbocharger:
Other main components of a turbocharger are a wastegate, intercooler, actuator bearing system, and oil supply. The wastegate is a valve that controls the number of exhaust gases that flow through the turbine. It regulates the boost pressure and prevents the turbocharger from overspeeding.
Intercooler: An intercooler is used to cool the compressed air from the compressor before entering the engine. This helps to increase the density of the air, which results in more oxygen available for combustion and more power from the engine.
Oil supply and Drain: Turbocharger needs lubrication and cooling. Thus, it's connected to the engine's oil supply system to provide lubrication and cooling to the bearings and shaft. Also, it has a drain system to remove the oil that has circulated through the turbo.
Bearing system: The bearing system is a set of bearings that support the shaft and allows it to rotate smoothly and efficiently. The bearing system also helps maintain the turbocharger's proper operating conditions.
--- Time Stamp --
00:00 - Introduction
00:24 - Working Principle of Turbocharger
02:19 - Why use a Turbocharger?
02:58 - Main Components of Turbocharger
04:03 - Early Turbochargers
07:05 - Turbocharged Cars
09:55 - Twin-Turbocharger
11:18 - Twin-Scroll Turbocharger
12:12 - Variable Geometry Turbocharger
13:07 - Electric Turbocharger
14:20 - Advantages of Turbocharger
15:18 - Disadvantages of Turbocharger
16:26 - Conclusion
#turbo #turbocharger #engine
References:
Wikipedia.org
Garrettmotion.com
More Videos:
Superchargers: • Superchargers: What Th...
Learn about every Engine Layout: • Learn about every Engi...
4-Stroke & 2-Stroke Engine: • 4-Stroke & 2-Stroke En...
Follow us on Facebook:- / fanpageengineerspost
Contact us: hello.theengineerspost@gmail.com
Visit our Website for more articles:-
www.theengineerspost.com/
Disclaimer:
This video is just for educational purposes only. We are not in the auto repair business nor publish automotive service manuals. This video is not reviewed or authorized by any vehicle manufacturer. This video is intended only as general guidance. Every system is slightly different, so refer to the owner’s manual of your vehicle for any specific information about your model. Remember that only proper service and repair procedures will ensure your car's safe and reliable operation.
Copyright Disclaimer:
Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance favor of fair use.
If you find this helpful video, please share it with your friends, and If you have any questions, leave a comment we’ll respond.
Thanks for watching, and subscribe for more.
Fun fact: The Roots-style superchargers are older than the piston engine itself and were first in use to pump air into iron furnaces.
A roots supercharger is a lobe pump, they already existed before piston engines, it was only when one was fitted to an engine that it started being called a supercharger. Centrifugal compressors also existed long before, as did turbines. Again it was only when one was fitted to an engine that they started calling it a turbocharger.
@@BigUrielkk
I love that i can sit here for 18 min while watching this and stay fully interested, but i cant pay attention in class and fall asleep lol
Perfect, very well explained, this is the type of channels that must be supported. Knowledge is Power.
Glad you liked it
Thank you very much, I am learning a lot from the videos posted on this channel
You´ve missed the Saab 99 Turbo, developed in 1977, and introduced their 99 Turbo in 1978, with a wastegate, in a ordinary familycar.
Thank you for pointing that out, the Saab 99 Turbo was a significant development for Saab and it was fitted with a turbocharged version of the 2-litre engine. We'll make sure to include it in future videos.
Saab Turbo was my first experience with a turbo vehicle. It was a fun car to drive. I loved feeling that Turbo Power kick in.
In Australia, when a saab arrives off the boat, it takes about 6 weeks before it can go on the sale lot, due to the need to do rust repairs on them. the company I worked for use to do about 20 a week.
@@TheEngineersPostaàa is
Facts born from Jets brother everybody keeps forgetting about them they call them GM but it wasn't jam it was saab opal they are the reason why almost every car on the lot now is turbocharged
I'm a commerce student but I still enjoy watching engine related stuff
Same here 😎
That's great! It's always good to have diverse interests and expanding your knowledge in different fields. I'm sure your understanding of engines will come in handy in your commerce studies as well.
@@TheEngineersPost yeh for some personal projects 😎
I am also mechanical engineer and my own car workshop I lv automobile very much ....m
software developer here, also love learning about automotive technology
A turbo with a motor that can eliminate lag and become a generator is the smartest yet so far.
So interesting. Very cool video. Would’ve liked a few more examples
Good information.. Keep up the good work
Thanks for explaining easily👍👍👍
you're welcome
Thanks for the insight.
Understandable way thank you
Very Creative Technology Products Video Review......!
Well explained ❤❤❤
Loved it!
The electric ones work ok and may the next to be installed in cars, trucks etc .You can get them as tween turbos as well.I have seen them installed in a Chevy Volt here on RUclips but it was a little crazy but it worked on the 2.2 engine .Single one was 2500 dollars and th tween turbo kit double price as the single turbo kit .
g3
I never have knew so much like this before😮
Holy crap, 1962 was the first water meth type intake type lol. That's cool.
Work for us a series of all injection systems and their types in the engine (diesel and gasoline)
Thanks for the suggestion!
Very good video
자동차 기술이 대단하십니다
Soo precisely explainedd ❤️
Glad you liked it
Nice information
nice
I need to learn more about automotive to get better on automotive and to work
After watch this I understand concept
Awesome human creation
great video, i have a 2021 Mazda 3 with a Turbocharged 2.5 inline 4 (250HP & 320TQ)
I have a 2007 Ford Focus St 2.5 five cylinder turbo running 340bhp
I got a 2017 q60 3.0t it’s a v6 twin turbo with 300whp. What I love about the car is just full bolt ons and a tune, and it’ll get 450 whp or 530bhp
how to determine extraction rotation of compressor wheel during overhauling
Nice
thanks for explain that was perfect video
Good job.
Thanks!
Nice power
Please your videos are watched all over the world. So please some conversions in brackets can help people that doesn't use imperial systems . Thanks 🙏🏾
No one uses the Imperial system since England and Canada switched to the metric system. Here in the States, we are slowly losing our American Standard system which is a shame as it is really suited to the US needs which the metric system cannot fulfill.
My Mentor The Engineering Post
Thanks 👍
PROFICIENT The Engineering Post
From Nick Ayivor from London England UK 🇬🇧
Thanks for watching
very educational, thank you very much.
If it gets to be electric, then we can even use a reciprocating pump, eliminating rotors altogether. Far more efficient and a small pump can produce all the pressure needed. In fact, a little cylinder can store a certain amount of compressed air to open up and supply the extra air to the engine as soon as it starts up.
What is the cause of not functioning of the lever of the actuator of the turbo
I love mu turbo diesel it just floats up the mountains
Electric driven turbo charger is promising and should be further developed by using vfd motors electronically controlled with respect to engine speed or throttle. .Anyway, thanks for the knowledge!
Man I love your channel so much thank you for your dedication to this channel❤️ one thing and I don't mean it as a criticism - as I'm sure it has been said before - but is there any chance on changing the automated voice?
What is the operation of the VGT at maximum pressure and minimum pressure and what is the position of the vanes when the engine is off?
Thanks for "tuning" in. I see what you did there.
Would you consider joining our "intake" ?
Nice vidio very nice
Nice❤
Op power 👀👀
BMW M50D also has 4 turbo’s on a inline 6
Is there a way to put both systems?
3:01 - I always thought the wastegate was on the cold side (compressor) of the turbo. But the video says it is on the hot (turbine) side.
Back in the 90’s you could buy a turbo go a car and it was called ‘TURBO ZET’. They were electric and worked well, you could get a kit for loads of cars!! Dunno what happened to them??
Turbos power in insane😍
Mercedes were using forced induction in the 1920's, but that was a supercharger, coupled directly to the crank via electric clutch.
So you hook up your turbo to the air intake and the exhaust manifold? Why doesn’t that make sense to me.
Basically...
The exhaust spins it
The spinny thing is now spun
Air doesn't like to be spun as it gets hotter.. so its fed into a intercooler
Then if there to much air it goes su tu tu tu
Cannot be simpler
@@nolesy34 lmao perfect "su tu tu tu"
colder air is denser air = moar air. otherwise its all just hot air
The best
That merc with plate licence PDN was from Philippines, wow
Lose the synthetic voice.
this is an AI content farm video
I agree. Completely ruins an otherwise informative video. If the maker of this video had watched the finished item, he/she would be aware of the poor quality audio, and then done something about it. At least, I hope this would be the case, as poor quality affects audience numbers and viewing figures adversely. I can only surmise they just do not care. Not good enough. I won't be watching any more content from this source.
Saying that turbos are more compact than superchargers is wrong. The full assembly of a supercharger literally comprehends the supercharger and the pulley with the belt. A turbocharger unit in the other hand consists of the turbo, the whole intake manifold, the exhaust from the engine to the hot side of the turbine, the wastegate, the oil line to the turbo and this is the essential; imagine the space that this system occupies with all the sensors and electrical harness, the intercooler, and the pop-off valve with the screamer exhausts.
“Thanks for tunning in to our video” no pun intended 😊
Turbos are all fine and stuff, probably all engines should have them.
Can you make a video about how does an Airbag System works?
Thanks for the suggestion!
Yeah you hit stuff the crash beam gets damaged and you get hit and probably die or get a severe concussion
Thanks 🦾🦾
I think my favorite part is the trBINE.
Great video. Can you notice an e-booster for motorcycle? Thanks.
4m40 engine turbocharger how to service it?
Why does it sound like this video was recorded 20 years ago? 😆
No, seriously, the video was fantastic; great job learned a lot.
But animation is like 20 years in future
Idky I'm watching this when ik all this already 🤣
Hii dear, can just tell me when we are putting massive turbo in car like 103 mm inlet hose, should engine need tuning like crank, cam, valve piston and con rod replacement.
What turbo system would you recommend for a Mercedes ce230 w124 1998? 2.3L
Many of the vehicles from WW2 that drove development of turbos were gasoline powered.
Maaaan... imagine flying at 40,000 feet in a biplane!!! Open cockpit! I get the engine is turbocharged but did they also turbocharge the pilot so he gets air to breathe? People were built different back then.
I want to learn about turbocharger from basics to professional level. where do i start from? also suggest me some book or website where i can get more information. Thanks
Hi i have a Q ... i have a 2004 toyota camry 4 cylinder can i install a single turbo to it ?? Or do i have to change things in the engine as my engine is stock
You forgot the moste important piece of the turbo system the Waste gate
And the Hybrid turbo ?
Gran Turismo games in the future give videos like this to click on in the upgrade section.
I feel like an electric supercharger would be way better then elec turbo because it would take more power to turn but but they wouldn't have to be spun as fast
Hi You Forget the BMW 2002 Tii
Ah yes, customers not knowing wtf they are doing and complaining about the cars they bought "not working properly" to the point wher turbos got removed from cars. Classic
And yet...
BLOWERS are THE ONLY WAY to make 12,000 HP dragsters work!
and for turbocharger you need to limit psi because it can damage your engine
Svp je veux cette vidéo en français 😢😢😢😢
1975 911 turbo was 256 bhp not 276bhp
Waoo
I have no idea how something can spin over 200,000 times a minute.
It floats on a oil film :D the small 0.8 smart engines rev their turbo up to 120k already
You can hear a turbo . Though it can reach higher notes than any singer. Maybe listen to a video with a big single turbo. Less scary RPM.
I used the work for an air bearing company & we made drills that ran over 300,000rpm. Because the bearing is air,there isn't heat build up.
Have a look @ Westwind airbearings.
Which turbo charger used in kia seltos
The Kia Seltos is available with two different turbocharged engines. The 1.6-liter Turbo GDI engine uses a twin-scroll turbocharger, while the 1.4-liter Turbo GDI engine uses a single-scroll turbocharger.
I though turbos we're just turbos lmao I didn't know there's to much
I wonder if there is a turbo attachment that shoots air in the form of pure oxygen, right into the turbo
That Would Be A Supercharger
I doubt it very much. Where would that oxygen come from? You'd need an oxygen cylinder in the vehicle.
Basically what a Nitrous oxide system does.
can someone explain why some people use dual wastegates on twin scroll turbos?
1 for each side = everyone knows that !
where can i purchase an electric assist turbo for my 1994 2.8 Pajero?
Ok ji
Just a Learning Question on Turbocharger for a V6 3.6l engine in Porsche Cayenne. Can you run an Air Cooler for the Exhaust Gases to help keep the Turbo cool? And Running your Oil through a Transmission cooler be Wise Too? Thanks.
You very much do not want to aircool your exhaust, you're gonna take energy away from it and it won't be able to spool the turbine, plus you'd probably melt the cooler anyway. Consider water cooled turbo. There's also oil coolers if you're worried about overheating your oil. Anyway, if you want to DIY then you have to EXTENSIVELY research the topic of boosting or you risk blowing your engine. Or just give it to someone experienced, boosting is not cheap anyway.
Why the turbo should not overspeed sir pls reply
its my first time lets hope i will won 2023
next time metric please
Twin turbo diff turbo size and biturbo same turbo size... what?
He’s wrong in that, twin turbo and bi turbo mean the same thing, the turbos are both the same size.
Haha, 6-8 lbs?? This isn't 1981 with you're Turbo Trans Am anymore....
You missed-out the MOST IMPORTANT early turbo application in a car - the BMW 2002 turbo, launched September 1973. Europe's first petrol/gasoline turbo, before Porsche (1975) or Mercedes (1978)
Though not the first use of a Turbo on a car.
1962 Oldsmobile Jetfire V8
i cant beleive turbo but my discover how to make cars very fast i beleive even your engine ahead 5000 cc you loss 12 years discover untill now im using no engine damage
You forgot SAAB!!!!
tur-bine
This is so hard on my ears. Really bends my wookie.