Churubusco Car Show 2021! BettyWhite And The Squad!
HTML-код
- Опубликовано: 8 сен 2024
- Churubusco's 10th Anniversary Charity Car Show. The proceeds will go to scholarships, food banks, providing for families in need, and several other community needs. I hope you enjoy the video, thanks for watching. I'll see you at the next show!
On Betty white what kind of grill is that I love ur truck
Hey, thank you! So for the grill it's just a standard HD grill that I cut the center mesh out, leaving the frame boarder. Then I bought a $99 eBay special HD mesh insert, that will Bolt in to the frame of the hd grill. Then I had the emblem made by MainEventEmblems. Thanks for the support 🤘
Where's AP and his Joke-r mobile?
It was there lol.
do you have a two piece drive shaft in that truck? it looks like a 3/4 ton, I didnt think you could get a coilover to fit in the front bc it wouldnt get by the upper control arm? please let me know your set up? I have a 2003 chevy 2500 HD 4 door long bed and Im being told im gonna have rear driveshaft issues and cant go to a one piece bc it will take out the rear bearing in the transmission etc. Im just lookin for 6 inches and some 35s or something close to that effect.
Hey, so I basically have the same setup as you. I believe the Dmax store sells a 1 piece aluminum drive shaft. That has good reviews. But yes, I have a two piece drive shaft. Once you go lifted, if you retain the 2 piece, you will just need a carrier bearing drop. Probably like 1 or 2 inches. That will help correct the driveshaft angles, and then you wont have any issues. For the front, mine is all custom. But I have an 8in Fabtech lift, with a 3in body lift. Any lift kit with aftermarket spindles, will be pushed out 2in on each side, gaining more clearance. The aftermarket upper control arms are tabular, which gains more clearance. I have custom shock hoops, to fit the larger shock, and an engine crossover bar to support the tops of the hoops from flexing. The shocks are Fox 2.5's. Capable of 12in of travel. With 800/900 King springs. Both front shocks combined costed about $2K. Hope that answers your question. 🤘