Complete Engine Repairing and Restoration How to diesel engine repairing
HTML-код
- Опубликовано: 21 сен 2024
- How to engine repairing and rebuild. Rebuilding an engine. How to diesel engine restoration video. How to repair engine.
#howto
#repair
#engine
#restore
That are very difficult working conditions and you still are able to perform a great job. Thanks, I really enjoy your videos.
Thank you so much ❤️❤️❤️❤️
These guys are amazing , They are extremely united , coordinated and efficient . The young men are learning to be masters at there trade like there fathers, uncles and brothers ... There is a lot to learn from these guys . They don't need Nothing fancy , no computers no lasers NO BS ....just hard work and determination .
day 1 ...Receive Truck , remove engine , teardown , clean and machine work .
day 2 . Re assemble engine
day 3...The customer is back at work with a fresh overhaul and feeling like a brand new truck .
Thanks for your comments ❤️❤️
Right, its work this way...
You obviously don't know much about engines, and neither do they. They make lots of mistakes. This is probably the worst engine rebuild I've seen. This is so bad.
Looks like a good coordinated effort but when I see that many guys working on an engine like that I know they have to be careful not to miss anything. Im sure sometimes one guy gets ahead of somebody else and they have to backtrack. Too many cooks in the kitchen syndrome. But the boss gave it a thumbs up. Good job.
These are the first guys I've seen in this series of repair videos that have had power tools. Impact drills/wrenches.
😍❤️
But no torque wrench, which is quite alarming
Well done gentlemen and lads.. You just know it's a big job when there is a nightshift..
Luckily no torquewrench was being hurt during the installation of the cylinderhead that day
They'll catch it next time.
also no thread locker was ever misused 😄
👍👍👍🇺🇸🇺🇸🇺🇸
You need knowledge of tightening sequence for cylinder head,crank and Conrod caps. You need to use a torque wrench to avoid unforced errors
Also not damaged, workbenches.
You really have indepth knowledge of the truck engine and its connections. Well done.
Thanks ❤️❤️
Eu amo mecânica. Fico fascinada com o funcionamento do motor, tenho carteira de caminhao mas nao to trabalhando na profissao. Sou fã de vocês, com seu trabalho espetacular. Sou admirada por vocês pelo seu trabalho que e de muita importancia. .um grande abraço De Rosana do Brasil....Que Deus abençoe voces e abençoe o Paquistao
They did an excellent job! It’s always amazing how much you can accomplish working together. Great video!
You guys are doing a great hard work job. Restoration of Big trucks,big engine...etc are far better than Indian mechanics, lots of love and respect from Indian👍👍👍💪💪💪
Jovens menos de 18 anos trabalhando juntos com seu pai aqui no Brasil não pode vocês estão de parabéns 👏👏 que Deus o abençoe 🙌🙏 22:40 abraço Jaú SP Brasil tá chovendo muito aí 🙌🙏
What amazes me is that customers trust these shops to actually fix their trucks and get them running again. If my local truck and farming equipment shop looked like these ones in Pakistan, I'd have to send my tucks and traxktorw over two hours away to get fixed
The proof of the pudding is in the eating.
I love looking for this video's is very simple and the people's very intelligent good luck brother's
My God! How much dust goes into a rebuilt engine? what about toque settings?
yet another OSHA safety training video at it's best !
Dear Brother ,
Thank you very much for your nice and fàntastic video .
With lots of lots of lots of love 💕💕💕 and regards ,
Jayantàda ,
13/1/2023
Many many thanks 😍❤️❤️
Good to see they have at least one power tool. Nice work gentlemen.
Thanks 👍
It's a toy one that makes noises. Sorry to disappoint
Perhaps in the next episode they might get a real one. To be concluded
Xin chào..các bạn làm việc rất tốt và chuyên nghiệp..xin chúc mừng và chúc sức khỏe🙏🌾👍
Excelente trabajo estoy viendo en Guatemala 🇬🇹
Good job I see you in Guatemala 🇬🇹👍
Have they ever heard of a torque wrench? Or about the strict order of screwing the bolts to the head? It's generally spiraling. or about centering the coupling
These guys are definitely more professional at this work than I've ever seen, Clean bench & work shop, Taking more care in cleaning the parts aswell very impressed,,😊
Thanks god they are using proper tools .
They are washing cranke shaft pistons etc after fitting , there's an edditing gap between fitting and washing
I am from Turkey to Pakistan, our sister country. I love and respect such talented, creative and hardworking people. I wish Islam were not dominant and Pakistan should focus on one thing if it wants to advance, the room is modern education.
I love seeing all of the fancy gay colors on these Pakistani trucks. They are so great to openly embrace the homosexual community that is so often oppressed by some Islamic countries. Just all of the colors on this one truck is like a New York City Gay Pride parade. Its good to know homosexuals are open and safe in Pakistan. After all. Not everyone can marry the goat of their dreams.
Crazy they impact everything inside the engine and all the critical components instead of using a torque wrench
It’s more guaranteed work when that engine fails.
@@Veritas419 unforgiving and relentless sharia law tolerance for failure is less than absolute zero. They cannot afford to get it wrong when a rebuild kit costs as much as a man's entire life wages.
Bravo! A job well done.
Thank you! Cheers!
I think I'll air freight my old Subaru over to these guys. It needs a complete going over.
Anything from a heavy goods truck to a motorcycle, they can do.
Thanks for these awesome videos. Great to see our blue collar Pakistan bros in action. How much does an overhaul like this cost ?
Around $6000 I guess 😍
Thanks for watching and comments 😍❤️
Я не мастер конечно я так и не понял в чём была проблема мотора .Вода в место антифриза даже в тёплом климате думаю не очень хорошо на долгую. И смотрю у них всё пневмо инструмент но там же есть моменты где усилия должны быть определённые при закрутке болтов я хз )) А так они реально молодцы моторы переберают как семечки )
😍👍
Это и есть настоящий кап. ремонт.
У них все норм, высшие профессионалы, без лишних движении. Чистый кап ремонт.
Why you did not use "dynamometric tool"for good measure screwed pins?. It is looking crazy.
Такой голос у них как будто миньоны движок собирают.
Ты в этом точно убедишься если поставишь на х2
Wonder how many minutes this thing lasted under a load? I didn’t see a torque wrench in this video. These people amaze me. All the hard stuff they do WITHOUT using air tools or specs info LIKE bolt and nut torque specs. No ratchet tools? Very few even have a shop with a real concrete floor. All work is done in the dirt.
Good Job Keep It Up 👍
Wonderful job 👍🤠😊
A nice clean work Bench this is another first for me,,😊
Its good to see those young boys ( working part time after school ) are learning a trade. Im just glad i dont have a well close to this place.
😍❤️
Not a torque wrench in sight & dusty work area, glad these guys dont working for boeing reconditioning jet engines
If these guys had the facilities and the tools and worked along side Boeings staff they would put Boeing to shame
Have you looked up Pakistani jet engine repair on YT yet? Just occurred to me to do just that.
Các bạn là những người xiêng năng tài giỏi 👍💖✨🍀
Good work. Thanks for your work👍
awesome job but I would at least look at the sequence of tightening the head bolts down.
They work their way from the center out and not in a circle.
The best mechanic
felicidades señores excelentes videos , son muy inteligentes los felicito; bendiciones , saludos.
Muchas gracias
Wenn ich das sehe, vermisse ich den alten "Dorn-Voda" , von dem ich einiges gelernt habe und der mir eine teure Schleifmaschine abgeluchst hat, der alte Fuchs. Davon kann man halten was man will, doch er hatte begnadete Hände.
Auch mein Campingbus stammte von seinen Händen, ohne das ich es wusste. Die Welt ist klein, von einem Freund gekauft in der Steiermark nach Wien, der schenkte ihn mir, ich brachte ihn wieder ins Steirische wo ich mei Haus habe und brachte ihn zum aufbereiten zum Herrn Dorn. Den traf fast der Schlag als er ihn sah, denn er hatte ihn in 3 Jahren Bauzeit umgerüstet, eingerichtet, lackiert und viele Fahrten unternommen, bis er ihn verkaufte.
Und ich brachte ihn zurück. Aus Freude verpasste er dem Motor ein Service von feinsten, der sprang dann beim ersten kleinen Hüpfer an, wie ein moderner Dieselmotor. dabei war es ein alter 220 aus den 70er Jahren...
Dieser Film zeigt ziemlich genau seine Arbeitsweise, einfache Maschinen, großes Fachwissen. Danke, Dorn-Voda, alter Fuchs und Handwerker. RIP
Trabalho incrível 👏👏
I'm 90 years old we never used a torque wrench, you do it day in and day out you will be in spect without one. Where a torque wrench is needed is so a total klutz can properly tighten a bolt.
Theses guys do a lot in Engine repair work, looking at this engine i get a feeling how often do they change the Oil in these engines; ? I meen there have been a few seized engines, ? In these Videos, 😅
Waoo zabardast 👍👍👍❤️❤️❤️
Saludos desde Argentina 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇦🇷🇦🇷🇦🇷🇦🇷
Her kalınlıktaki cıvatanın bir sıkma kuvveti vardır buda tork anahtarı ile yapılır. Nedense siz Pakistanlı ustalarda bu anahtarı kullananı görmedim. Aslında motor temiz ve kapalı yerde yapılır toz ve uçuşan kum ve pislikten korumak için. Sizin çalışma şartları daha iyi olsa iyi olur. Ellerine sağlık kolay gelsin.
Excellent camera 🎥 work 👍
Personas extraordinarias
Esta bien chingon el jale que hacen mis respetos
Did the cylinders get honed out with stone?
New liners I thought?
New liners but in another of this guys videos they honed them with a proper cylinder hone after installation to give em a good crosshatch pattern for the rings to seat proper. Just did not show it in this video but you can see the crosshatch pattern during piston installation.
Deus abençoe todos vocês
Какая там охуенная погода - ни пыли, ни ветра. Одно удовольствие собирать на свежем воздухе)
Simplesmente o melhor
Охренеть! У них есть нормальный инструмент а не три ключа на всю деревню, но на то как притягивают ГБЦ всё равно было больно смотреть
Они вообще красавчики, Двину на колене собирают, нашим надо так учится, и в быстрые сроки по любому, всей толпой конечно быстро, и оперативно
То что гбц они так притягивают, значит знают что и как надо, по любому, они на этом собаку съели, это мы у них должны учится
@@Dmitry14region на некоторых моторах в руководстве по ремонту прямо указано - затягивать после подтяжки гайки до упора на столько-то градусов...
A ty byś lepiej potrafił
@@Dmitry14region они делает правильно, иначе коленвал не смогли бы крутит в ручную, каждый болт гайка в ручную без натяжки и подгонки тогда все будет норм в руках профессионалов.
Daora mano adoro esses vidio👍🏻👍🏻👍🏻
wonderful job how many days it took for full restoration work of this lorry engine?
It take 3days to fully restore Engine, sometimes 3 days.
Thanks for your comments 😍
sempre é bom trabalho em grupo estão de parabém
Allah given this power to do these things were easily
MM77 Approved 👍🏼👍🏼
isso e o que precisava aqui no Brasil, jovens trabalhadores que serâo o futuro do país. parabens.
❤️❤️
exselente trabajo maetro mui bueno saludes noel matute de california
Very smart people
Good job excellent
Torque wrench?
من الجزائر بارك الله فيكم وان شاء الله المزيد من التقدم و التصنيع
esta buenisimo el video saludos
Love you Pakistani driver and machine
Bai jab ap truck driver ka. Review be kya. Kara
Nicely done guys! Does the crane operator guy at the end still have his teeth? How sad.
Nice work.RESPEKT..these workers get maybe 1 $ aday.
Excellent job
ordre de serrage des paliers de villebrequin et serrage au couple pas de cle a choc
😳 I feel bad for all involved with this project. Their not making a cake😂😂
Great job, respect!
❤️❤️
From
369JP
Super video
👍Good
Em agosto do ano passado 2021 mandei arrumar o motor do 2638 chipado 420 gastei 58.000.00 reais julho do mesmo ano ficou 29.000.00 reais ,a mão ✋ de obra motor ficou 5.000.00 reais oficina dóis irmãos Jaú SP Brasil parabéns 👏 jovens que estão ajudando é assim que aprende a trabalhar abraço Jaú SP Brasil
great job!!
Thanks!!
Great job
Me quito el sombrero 👏 con ustedes, son unos profesionales me gusta como trabajan y lo rápido que son y sobretodo ,siempre limpian bien todos los motores y salen nuevos, saludos para todos desde miami FL estados unidos 🙋♂️😃
Протяжка головки оригинальная , через пару месяцев прокладку придётся менять.
Muito bom 👍
Зачем так забивать новые гильзы
How do they remember what bolts go where?
Oh yes thees guys are really moving now. 😊
Great Job
Yo vivo Guatemala 🇬🇹 Quiero comprar un camión de Pakistán
I’m here in Guatemala 🇬🇹 I want buy the truck the Pakistan
Kalau di indonesia turun mesin bisa satu minggu
Great bhai
Super
❤️❤️❤️
2:32 si fallara y bajara el carrito le cortaba las manos....llevo tiempo viendo estos documentales y no entiendo como se puede trabajar con cero medidas de seguridas...ni tan siquiera las mas basicas...deben de ocurrir muchos accidentes...mas aun cuando se ven una mayoria de niños.....que quiero suponer que seran aprendices..????.
linishing the crank was scarry
Y los torques para cuando?
Niechaj Bóg was błogosławi super mądrzy mechanicy
allways likes
Los pares de apriete no los respetan mucho....
Ya it's crazy everything is just impacted back together and not torqued. Especially inside the engine and wheres gaskets
Never met a small hammer they liked to use.
Buenos mecánicos y muy mañosos
Muchas gracias ❤❤❤
Да такого ремонта я в жизни не видел,и они хотят показать,что этот двигатель будет ходить?
I get the conditions and lack of appropriate tools etc, etc. But surely a quality torque wrench is not that hard to find ??? I have never seen anyone tighten mains and big ends and head studs with an impact gun before, ever. Not to mention they are re-using the same head studs which would be stretched to the shit house. I wonder how many head studs they have snapped or stripped over the years ???
Old Head stud/bolt snapping/ stripping is very rare. It is depend upon the customer, if he ready to pay for new head studs. customers insist to bring total overhaul cost to minimum as much as possible & also insist to use same old nuts, bolts as these are genuine company made.
@@mohammadluqmanmurtaza5336 No worries mate. I understand the cost issue, I just thought a good torque wrench would save some headaches.